Considering that needle nose pliers are often used to reach into tight spaces to pull thing out, I am surprised you didn't do a linear pullout test. That would seem to be a more important metric than cutting deck screws or 16p nails. Quite frankly, if you are using a pair of needle nose to cut deck screws or large nails you probably shouldn't be using tools in the first place.

@autumn5592

2 жыл бұрын

I was also disappointed there wasn't a test like this too.

@dungufed349

2 жыл бұрын

Yes! There should be a test to pull really slim things like a sheet of paper to show the build quality.

@Nevir202

2 жыл бұрын

The point isn't that you'll do it, it's an attempt to simulate hundreds of lesser cuts.

@georgeorwell126

2 жыл бұрын

100% agree. I don't think a lot of people are trying to cut through deck screws with needle-nose pliers.

@acog_quarks8753

2 жыл бұрын

This was the most important test and he missed it. Would love to see a part 2 for this. Love this guy’s videos

I'm always impressed by the thoroughness and impartiality of these tests. I've bought a few things based off of these reviews.

@ProjectFarm

2 жыл бұрын

Thanks!

@bennyattar8862

2 жыл бұрын

I think we all have. I wouldn't be surprised if hardware retailers followed the channel and based their stock decisions on the recommendations. They would be fools not to.

@julioangel1839

2 жыл бұрын

Me too

@rossb5593

2 жыл бұрын

Just a few? Lol. I check back every time I need to buy something. First place I look.

@1804unclesam

2 жыл бұрын

@@ProjectFarm have you done wire strippers? Those are definitely tools where tolerances matter.

Before Project Farm, I used to have matching tools. Now my tool box looks a mess but each of them excel at what they do. Thank you, as always, for helping us choose the right tools for what we need them to do most. I will echo everyone else's comments about including the relative diameter and depth the pliers can enter. I usually use my needle nose for extraction, pulling cables through holes or twisting out broken screws. Looks like my need is the Vampires, but looks fairly wide.

@ProjectFarm

2 жыл бұрын

Thanks for sharing.

@praisejesusrepentorlikewis6218

2 жыл бұрын

Repent to Jesus Christ “I will say of the Lord, “He is my refuge and my fortress, my God, in whom I trust.”” ‭‭Psalms‬ ‭91:2‬ ‭NIV‬‬ J

@Nitecrow314

2 жыл бұрын

Better to have mismatched but effective tools over getting hooked on a particular brand name like the marketing men want!

@matthewohan5506

2 жыл бұрын

@@Nitecrow314 agree!

@matthewohan5506

2 жыл бұрын

Update: got the Vampliers japanese brother: Engineer pz-60 (I believe) with the green handle. It's half the price of the Vampliers but exactly the same in every other way. It is double the thickness of a needle nose pliers tip, but the screw extractor got out a screw that's head broke off 10 years ago and couldn't get it out without damaging the wood. Yet again thank you Project Farm!!!

While I enjoy the tests performed on this channel I've often wondered who would actually mistreat their tools like this. Then my neighbors kid borrowed some tools from me.

@ProjectFarm

2 жыл бұрын

Sorry to hear!

@jimc4731

2 жыл бұрын

AH,Ha,hahhahhahhaaaa!! You need a second set of loaner tools! JIM 🤔

@kenbrown2808

2 жыл бұрын

tools are tools, not family heirlooms. sometimes you accept wear on a tool to get the job done.

@Ozmandius

2 жыл бұрын

@@davysanders4922 is your favorite uniform a white sheet?

@LBCAndrew

2 жыл бұрын

Yeah. Loaning out your tools is the ultimate in mistreatment. It reminds me of letting a friend drive my car when it had only 5k miles on it. The clutch has shuddered a bit when cold ever since. makes me mad just thinking about it.

When it comes to needle nose pliers for me, toughest isn't really the most important factor. You can beef them up to survive twisting and bolt cutting but that makes them heavy, stubby and uncomfortable. Its helpful to know how strong they are, and I appreciate knowing the weight, but its much more important how comfortable the angles and curves are, how far they reach, how precise and smooth the movement is and how much they loosen up with use. As usual though this is a terrific video and the accurate, consistent testing apparatus continues to impress me.

@ProjectFarm

2 жыл бұрын

Thanks so much! Thanks for the feedback.

@huethehand1

2 жыл бұрын

exactly the ones he said were good would actually suck at doing the needed job of getting in to small places that they are meant to do. like the Knipex ones i use those in real life yeah they may not be the best for cutting nails or twisting the tips but getting in to small places and doing their job they are the best

@thezfunk

2 жыл бұрын

@@huethehand1 I love Knipex tools but was kinda disappointed in their needle nose. The tip bent on mine while using it and I didn't think I applied that much force to it.

@trollmcclure1884

2 жыл бұрын

@@thezfunk Knipex is overrated. And No, the ergonomy shouldnt prevent the company from using a decent spring steel. I'd rather breake mine. I hate when I have to straighten pliers like it's mild steel

@hanwagu9967

2 жыл бұрын

I agree. Use the right tool for the job. Most of the needle nose pliers tested here are unwieldy for the job, and basically have become tapered or combination lineman-needle nose pliers.

It would be helpful to add a measure of accessibility in tight spaces. Something like "what is the widest width of the nose while inserting it one inch into a space". Something to show how useful they are in the tight spaces that needle nose pliers are typically used for. Many of these are trading their accessibility for strength and that should be a consideration made. As always, great video!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the suggestion.

@ActingLikeABoss

2 жыл бұрын

Completely agree. It’s the main reason I even bring needle nose pliers to work

@dtroy15

2 жыл бұрын

Agreed. And the pliers which excel at needle nose tasks are penalized in the torque test for being needle nosed. Sure, lots of knuckle heads twist needle nose pliers like that, but that's really what flat nose or linesman's pliers are for. Same with the nail cutting test. The pliers with the best reach (and thus shortest handles) are penalized for not being able to cut a screw.

@kuangsheng3891

2 жыл бұрын

Difficult access and a straight pull is what they're for. We're spoiled by these videos but it was harder watching this one. I've got four different pairs at the moment and the knipex is my favourite because of the narrow profile and the smaller handles. I've got NWS, Channellock and some off brand ones too.

@michaellinner7772

2 жыл бұрын

I always buy an extra pair of needle nose pliers and grind down the tips so it will fit into things like door lock keyways, etc. They're not good for much else but they're invaluable for those special circumstances.

Your videos and unbiased reviews are awesome. For the last 10ish years I worked at an auto parts store and everytime someone asked me questions about products, I had answers because of your videos. Every chance I had, I would tell every customer to look up your videos! I don't work in retail anymore but I still tell litteraly everyone about your channel! Thanks for all your awesome work!

@ProjectFarm

2 жыл бұрын

You are welcome! Thanks for sharing the channel!

One of my favorite channels. I watch all your reviews then immediately put your number one in my Amazon wish list. Thorough and extremely helpful with the insane amount of choices we now have for tools. Thank you.

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

A tool I use a lot. Thanks for another fantastic product testing video!

@ProjectFarm

2 жыл бұрын

You are welcome!

@praisejesusrepentorlikewis6218

2 жыл бұрын

Repent to Jesus Christ “I will say of the Lord, “He is my refuge and my fortress, my God, in whom I trust.”” ‭‭Psalms‬ ‭91:2‬ ‭NIV‬‬ J

@uiopuiop3472

2 жыл бұрын

@@praisejesusrepentorlikewis6218 who

@ulicrammond1756

2 жыл бұрын

@@praisejesusrepentorlikewis6218 WTF

I would have loved to see jaw force generation and a straight pull. I use my needle nose for getting in tight spaces and pulling connections or ripping something off. Still, another great video with a great selection of accessible brands!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the suggestion.

@dollarbillme

2 жыл бұрын

Same here. I use them for gripping and pulling wire or fish tape.

@georgeorwell126

2 жыл бұрын

Yes, the lack of that metric was very disappointing.

@john-paulsilke893

2 жыл бұрын

Similar to holding strength of the screw. But definitely a different test that is specific to these tools. I end up using needle nose ViseGrips for this, but they don’t always fit.

@stelonous

2 жыл бұрын

Doesn't this translate to the turning testing? If a needle nose can hold something from just twisting, it's certainly going to hold something on the pull out.

One of those rare times when one of the least expensive options is one of the best. Great work as always!

@ProjectFarm

2 жыл бұрын

Thanks!

@randymagnum143

Жыл бұрын

Of course, they were pretty trashed by the end.

Have been using Klein for years and they are really hard to beat in industrial settings. Thanks for the hard work putting together a great comparison.

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

It would be nice to see a comparison of diamond wheels for angle grinders.

@ProjectFarm

2 жыл бұрын

Thank you for the video idea!

@Farm_fab

2 жыл бұрын

Maybe a diamond hone comparison would also be good.

@bixby9797

2 жыл бұрын

I just bought a couple. That would be a great test along with cutting wheels. Lol, you did that 3yrs ago. Of course!

@Dirty_Bear22

2 жыл бұрын

@@Jack.333 the 3m 60926 cartridge along with one of their full face respirator will provide very good protection for nearly all hazards. A properly sized osha approved dust extractor, and plenty of ventilation is ideal.

@Tool_Addicted_Carpenter

2 жыл бұрын

I have a diablo that has cut probably 10,000 nails lol

I would think an important characteristic of needle-nose pliers would be how deep into a hole or crevice can they reach to grip something. That doesn't appear to be accounted for here, they were just run through similar tests as regular pliers or cutters. Some were relatively think and fat, less nimble.

@ProjectFarm

2 жыл бұрын

Thanks for the feedback.

@treyhart6861

2 жыл бұрын

This is true, however, I also fear there is no one perfect set of needle nose pliers. I have come very long narrow ones for exactly what you mention, other smaller ones with very precise fitment for pulling cactus needles out of people, and then others for higher torque applications. Its like looking at the tweezer section in the Wiha catalog.. who knew there would be that many pages of different shape and size tweezers.

@PowerBadger

2 жыл бұрын

I agree. I for one do not really care about the wire cutters on my needle-nose pliers (I have plenty of other, better ways to cut metal), but I care a lot about how long and skinny the nose of the pliers is!

@Bierstadt54

2 жыл бұрын

@@treyhart6861 Yeah. It seemed that the Knipex were a different type of needle nose compared to the others, but for most things I use needle nosed pliers for, that's the type I reach for.

@cheesecurd100s

2 жыл бұрын

I've ground down a few different pliers for specific task, but I also tend to break a lot of needle nose so fatter ones are good for some stubborn fasteners task

I really appreciate your new videos. Very trimmed down and more tightly packed. Straight to the info. ❤️

@ProjectFarm

2 жыл бұрын

Thanks!

Your tests are precise and unbiased. I look forward to these every damn time. Amazing content man

@ProjectFarm

2 жыл бұрын

Thanks!

I love this channel! With that said I work in a industry where needlenose pliers are our primary tool. It would have been nice to have a test to see which pliers would pick up and hold firmly the smallest item? Such as a small wire,string etc. The tolerance between the jaws when closed is super important!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the video idea.

@alfredomarquez9777

2 жыл бұрын

EXACTLY! Needle nose pliers are a "saver" or "rescue" tool, so they need to pick up and hold small pieces at the extreme end. Some are thinner and thus can get inside deeper, but then fail miserably to hold the spring or piece I need to pull or turn. The twisting test is revealing, but most pliers will just slide before any real twisting occurs. Perhaps a more related-to-daily-use test could be devised, in the Project Farm tradition...

@iPsychlops

2 жыл бұрын

Maybe pick up the small item with the lease amount of force required.

@rak6437

2 жыл бұрын

Project Farm is the hardest working man on KZread. Hats off for him.

@LordCommanderSpaceAlligator

2 жыл бұрын

So youre a sex change doctor?

A pulling strenght test would have been nice. Since thats what I mostly use needle nose pliers for. Get into tight spaces and pull something out, when I cant do it with my fingers

@ProjectFarm

2 жыл бұрын

Thanks for the suggestion.

@MrAnthony992

2 жыл бұрын

That's what the grip test is for, and he did that. Because what is that the pliers do when you pulling something? They grip and YOU pull.

@DEVIL666wtf

2 жыл бұрын

@@MrAnthony992 ya but not turn so ya no he didn't to it

@jasonboyko

2 жыл бұрын

@@DEVIL666wtf He did grip, then he did turn, but not at the same time.

Another flawless test procedure by the best tool review channel on KZread and any other venue. Thanks for posting and take care!

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

This is the best science , and general testing on KZread 👌👌 SUBSCRIBED !! 👍

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for watching and subscribing!

The Knipex pliers you tested were much longer than the others. They do have a shorter model that is much more stout and closer to the other brands tested. Thanks for the content!

@berndrosgen1713

2 жыл бұрын

Yes, it is clearly a different design of the europe and US needle nose pliers. The US are made for heavy duty and look beefier. Maybe the europe ones were developed from electrical pliers.

@NoxiousNoodles

2 жыл бұрын

@@berndrosgen1713 The Wiha ones were actually labelled as such.

@ProjectFarm

2 жыл бұрын

You are welcome! Thanks for the feedback.

@itachione2483

2 жыл бұрын

@@berndrosgen1713 Yes, Knipex in Europe is definitely made for electrical use, and only knipex had 1000V insulation and grip protection. I working with Knipex tools (im an electrician) and for electrical use, knipex is the best.

@mauricepeters7684

2 жыл бұрын

@@itachione2483 not only for electrician's work, i have some knipex tool's and work in the automotive industrie. especially the cobra's are amazing, cant really live without one😅 ergonomics are also on-point and the fact my dads 30 year old set is like new says enough...

Considering all the tests you do with hand tools like this, I would love to see a comparison of pruning shears! Like, the ones that advertise being able to cut 1" branches, because it always feels like a lie.

@ProjectFarm

2 жыл бұрын

Thanks for the video idea.

@browngreen933

2 жыл бұрын

Great suggestion!

@CarpeDiem601

2 жыл бұрын

There is a lot of technique involved in using hand sheers. An expert watched me struggle with a thick branch then showed me a technique that made it feel like butter!

@bagelbandit6076

2 жыл бұрын

Stihl has some amazing pruners

@kenbrown2808

2 жыл бұрын

I remember when I was a teenager, I paused to question the guy demoing a ratchet pruner at a fair, and the only answer he would give was along the lines of "these aren't a toy, look how easily they cut through this quarter inch dowel? finally I said, "considering I normally cut inch and a half to two inch material with the one I use, and you can't claim to match that; as far as I'm concerned, yours IS a toy"

Thanks for helping the working folks like us make choices to have quality tools at a reasonable budget! bottle jacks or wire strippers would be great to see!

Dude I really do love your videos. Just good practical tests and straight facts. Just excellent content you provide. Unbiased and very informative.

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

Thank you for your diligence. I can only imagine the effort, time and money it takes to document all these tests including many different camera angles and even close up images. Amazingly useful.

@ProjectFarm

2 жыл бұрын

Thanks so much!

Some of these have rather limited reach into tight spaces. That gives them an advantage in these tests but is not what I'd want in needle nose pliers ...

@ProjectFarm

2 жыл бұрын

Thanks for the feedback.

Excellent work! I thought the Knipex would destroy everything else. I own a set of snips from Knipex after trying sets from several other vendors. It's the best set of snips I've ever used, and is exceptionally well-built.

@ProjectFarm

2 жыл бұрын

Thanks for the feedback.

@ohauss

2 жыл бұрын

Well, Knipex offers a host of different models of the same general type. Using a screwdriver to drive in a nail also won't get the best results... You want pliers to exert force, use the ones built for that purpose. Knipex has a whole bunch of them with long handles and short, broad tips.

@andrew61987

Жыл бұрын

I think the knipex got a bit of a short straw for these tests because the 8" knipex needle nose is in the same "class" if you will as smaller 5 or 6 inch needle nose by other brands, they just made them nice and long. They aren't made for the same purpose as say the Klein 8" needle nose which are beefcake and essentially linemans with a long nose.

@littlejimmy7402

Жыл бұрын

@@andrew61987 Every knipex guy was grousing over this test or that test. "Oh, for that I would have pulled out my knipex twin-grips!" Or whatever.

@aliancemd

7 ай бұрын

The way he tested these, because of its longer nose, it was going to lose most of these tests(it should of done better in cutting stuff). The real use-case for this tool is not to cut nails but reach into hard to reach areas and pull something, like a cable.

you're so good at featuring tools and recommendations my dad can't buy tools without me. thanks for the unbiased testing of tools whether it ended up too brutal on the tools itself. more power and I'm waiting for more tool showdown!!

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

I think I speak for us all, we'd really like to see you get back to destroying lawnmower engines! Great video as always

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the suggestion.

Not sure this is a fair test, some of the pliers, such as the Knipex, have long thin noses and seem to be designed more for electronic and small component applications, rather than the heavy mechanical uses the tests focussed on.

@jacobdubeau8162

2 жыл бұрын

tool is tool

@johnhoward6201

2 жыл бұрын

@@jacobdubeau8162 Eh...??

@mYm_StaGe6

2 жыл бұрын

True

@benjamin8981

2 жыл бұрын

well this was a test for mechanical use of pliers. electronic pliers are much easier to judge by feel. it’s hard to judge mechanical strength before buying

@bobbrown98

2 жыл бұрын

I get it - but we also have to remember that Knipex only makes pliers - but has like 254 models - so which ones should he pick? I bought a great pair of Knipex that are extra long and pointy - and the jaws are actually a bit flexible. So yeah. Tough to get a perfect 1-1 comparison with such a specialized company with Knipex vs Stanley that makes 2.

Thank you for doing my recommendation! Your tests are brilliant!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the video test recommendation!

I love the consistency in this channel. Presenter in same position at start of each video with same patter. Same dialogue during testing. 'We are going to test that!' Always makes me smile as it's a bit tongue in cheek sometimes with outrageous claims from manufacturers! Keep up the good work..

I really liked the Knipex pliers due to the long nose. I can get into various nook and cranny due to the long nose, granted they are not tough enough to withstand twisting and bending however, they have helped me greatly through some odd jobs.

@ProjectFarm

2 жыл бұрын

Thanks for the feedback.

I've bought quite a few Kobalt tools over the years, including a ratcheting breaker bar and automatic adjustable pliers. They have always impressed me and experienced less corrosion when compared to other tools that were left in the same conditions. If I ever need another set of needle nose pliers I know which one to buy. Their miniature pliers set is also really good.

@ProjectFarm

2 жыл бұрын

Thanks for sharing!

@DadsDeerTrailCam

2 жыл бұрын

My only tool from kobalt that rusted was my driver bits from 5 years ago that I left out for a few months accidentally. Of course, I broke several other bit sets in that time, so not a huge complaint.

@localeightironworker

2 жыл бұрын

i have a kobalt adjustable spud wrench and it's got the sloppiest action out of any adjustable i've ever used. but, the tool IS highly resistant to rusting, so you may be on to something

@Just_A_Dude

2 жыл бұрын

@@localeightironworker Kobalt is an entry-level brand, but they're a _good_ entry-level brand.

when ever i am looking for any tools or shop supplies My first stop is to see if you have done any testing on the product I am looking to buy. I realy appreciate how well you test everything. Good job!

@ProjectFarm

Жыл бұрын

Thanks and you are welcome!

Another wonderful test! Quite convenient considering I used this tool today! Well done.

@ProjectFarm

2 жыл бұрын

Thank you!

Yes! I’m so glad you did this video , I always find myself grabbing this tool especially for setting springs in hard to reach places like clutch pad springs

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for sharing.

These pliers are not all the same concept, the Vampliers are not long nose, but more like flat nose. And there are a few others that I wouldn't call Needle/Long nose pliers, but short(er) nose pliers. The thickness of those are not in comparison with the real Needle/long nose pliers. So it's a bit like Apples and Pears.... But thanks, as always!

Always a joy my man, thanks for the tests and results, very useful for someone like myself 👍

@ProjectFarm

2 жыл бұрын

You are welcome! Glad to hear!

I love you Project Farm! Keep doing what you do!

@ProjectFarm

2 жыл бұрын

Thanks, will do!

Can't we just say he never disappoints us with his content

@ExcavationNation

2 жыл бұрын

Sorry 😂 had too

@ProjectFarm

2 жыл бұрын

Glad you're here and thank you very much!

@luke7542

2 жыл бұрын

Fr

@harisjaved1379

2 жыл бұрын

Agreed!

@spacepope-1

2 жыл бұрын

I think we can say that

when my man on the discovery channel, rolling around in a $150k F350 4x4, visiting U.S. tool company, imma be like, "i've known dude since he was in his shop exposing the TRUTH!" Salute!

@ProjectFarm

2 жыл бұрын

lol Thanks!

I always enjoy Your revues and tests , one thing that is becoming fairly obvious is that regardless of the tool tested , the Kobolt products whilst not necessarily Winners in any particular category or test , they consistently rate in the top 5 and are some of the cheaper products available , they really do appear to be pretty good value for the money and should certainly be a serious consideration for those of us on a tight budget . Your attention to detail and consistency in testing methods is Admirable and an example for All other testing channels , Thanks for all Your hard work & effort . Catch You next video , Stay Safe & Stay Well .

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

Another brilliant tool test. That last twist test was very revealing. Nice work sir.

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

I can't wait to see you test out pliers wrenches. Harbor Freight just announced the Icon brand is making a version of the Knipex. I'd be interested to see how they match up.

@ProjectFarm

2 жыл бұрын

Thanks for the suggestions.

@fernanddeponceleon4170

2 жыл бұрын

Harbour freight 💪💪💪

@miketonon7946

2 жыл бұрын

Project Farm, Pennzoil has a new coolant that they claim lasts 15+ years/350,000 miles. Can you test engine coolants?

@microwave221

2 жыл бұрын

I was just at my local HF looking for one of those, but they were all sold out.

@mandolinman2006

2 жыл бұрын

@@microwave221 the website says so too.

Awesome video! Would love to see one on the various modular tool storage systems on the market now (Milwaukee packout, craftsman tradestack, ryobi link, etc.)

@ProjectFarm

2 жыл бұрын

Thanks for the suggestion.

@gmwilliams4314

2 жыл бұрын

This is a Great Suggestion!

Your videos are awesome, started watching them before I buy new tools to make sure I'm getting good quality for my money

Excellent testing, thank you.

I have to say that I doubt that I would ever use a long set of pliers to cut through nails, deck screws etc....matter of fact, I havent ever used them for that purpose...there are other, more adept tools for that purpose. If they can get into a small hole to pick something up without damaging it or retrieve it easily, then that would be good enough for me. I can appreciate your approach but I don't think that it is pertinent to these specific tools. Maybe tests of how well they can pull eg. wire through a hole without losing grip or how well they feel in your hand when using them in similar situations would have been more appropriate?

The bend test was interesting and useful. I'd also love to see a corrosion test cus my kid is always leaving my tools out lol

@annihilator4000

2 жыл бұрын

Sounds like you need a locking tool chest. Haha.

@ProjectFarm

2 жыл бұрын

Thanks for the suggestion.

@mrgunn2726

2 жыл бұрын

Totally agree, corrosion and drop testing are musts.

@TravisTerrell

2 жыл бұрын

Oooh corrosion test for all applicable tools would be sweet! In the humid south, it's a real problem for me if I don't keep my less-often-used ones oiled regularly.

@_JimS

2 жыл бұрын

Charge him a dollar every time he leaves a tool out.......bet he stops that bad habit.

Love the reviews. Didn’t think I needed this in depth testing for needle nose pliers but I was impressed. Proves you don’t need to spend a ton to get some decent pliers.

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

Probably one of the top 10 most useful video concepts and executions on this platform Well Done Sir!

@ProjectFarm

6 ай бұрын

Thanks!

Klein tools have always held up well for me and I'm rough on tools. I've been brutal with their side dike, lineman pliers. I hope they can continue in quality and not be sucked into poor Chinesium. Thanks for another great comparison!

@ProjectFarm

2 жыл бұрын

You are welcome!

@Washman-jw3hl

2 жыл бұрын

Roger that Kevin. I've been going out of my way to shop for things NOT made in China more than ever. It's not easy. Really missing the old school Craftsman hand tools that always had made in USA embossed on the side of them. 👍 Germany and Japan are often top notch as well.

@beast64375

2 жыл бұрын

As an electrician, I can't tell you how many sets of pliers and screwdrivers I've destroyed over the years; kleins are the only ones I've owned that held up better than the rest on most tools.

@jefftucker9225

2 жыл бұрын

I have some Klein tools as well and all have been great so far, they may cost a little more then some of the cheaper brands but all the different tools I have bought by them have held up good

I bring one of these kind of pliers every day with me, I bought mine in a general material store in Indonesia 4 years ago for less than $4,00 and it performs still very well. I was really surprised by the kobalt brand doing so well for that cheap! The ones really let down for me were Wiha and Knipex. Great video!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

Super useful info! Your channel is a real eye-opener. It's virtually impossible to get this info anywhere else!

@ProjectFarm

2 жыл бұрын

Thanks!

Thanks for testing and reporting! Thumbs up.

@ProjectFarm

2 жыл бұрын

You are welcome!

Love watching all your videos; especially the creative testing rigs that you build. In addition to focusing on “strength” attributes of the products; it will be great if you can explicitly test “durability” of these products. As a DIY’er who wants to make purchase decisions based on your video; I will rarely push the limits on the strength of the tools; however love to know which ones will last long and do a reasonable job. Thanks.

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

Great job! As a lineman most of our tools were Klein and some Irwin. They rarely let us down. I do like Kobalt too, so this video was a win-win-win for me. :)

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

Thank you for making these videos they are incredibly informative and its safe to say we know what we get for our money thanks to you.

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

Another great test! Thank you!

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

I would never use this for cutting nails or screws. wire only. thought for sure knipex would win. nope. great job. surprising results

@mrcryptozoic817

2 жыл бұрын

Other than 14 or finer ga. mild steel wire, I'd Never cut steel wire with them. And it's obvious to me that they weren't designed for cutting bigger or harder wire (nails and screws) because hand grip with a single pivot is insufficient to generate that much power.

@ProjectFarm

2 жыл бұрын

Thanks!

As always, spectacular content. But of feedback for the nail cut test; Joe about a standardised distance from fulcrum for where the force is applied to the handle? Say 3" back from the pivot. This would test the cutting faces more comparably, and maybe negate some of the issues faced by shorter handled cutters. We don't apply pressure right at the ends anyway. Just a thought

@muddyriverdogz

Жыл бұрын

Probably the best thing to look at there is damage to the cutting blades not the amount of force it took.After all needle nose pliers are not your go to cutters.

Thanks again for such an in-depth review. I've now ordered a pair of Irwins as I need the strength in the tips of the jaws and also a chunky grip. When I need tools I don't look anywhere else for reviews now 👍

@ProjectFarm

Жыл бұрын

You are welcome! Thanks for sharing.

This channel is the gift that keeps on giving

@ProjectFarm

2 жыл бұрын

Thanks!

Just out of curiosity, could you cut the plastic handle protectors off so we can see what the handles look like underneath on each brand?

@ProjectFarm

2 жыл бұрын

That's a great recommendation! Thank you

@263sparky3

2 жыл бұрын

Very pertinent. I actually cut the rubber off all my pliers and dykes. It’s surprising how companies actually use their handles to cover up bad metal forging

I really appreciate my Knipex needle nose. Most other needle nose have a bass ackwards design. Longer handles and a shorter needle nose. It makes them virtually useless. I can reach much more in tight spaces with my Knipex. I’m not worried about grip strength that’s why I have lineman pliers.

@ProjectFarm

2 жыл бұрын

Thanks for sharing!

@jameshunt2141

2 жыл бұрын

i have the knipex telecom plires or 29 21 160. brilliant for reaching into places but i wouldnt be grabbing screws or cutting nails with them

@john-paulsilke893

2 жыл бұрын

It is Project Farm and he’s a farmer so used to bodge-jobing to get things done. Obviously he won’t understand specific trade necessities. He’s been informed about these issues and said he will include changes in his future videos. Very smart man who is very good at learning and adapting, just like most hard working farmers I know. (Not sure of his specific farm or farming work though).

Thank you so much for these test! You really help me buy better tools once my old ones wear out.

@ProjectFarm

2 жыл бұрын

You are welcome! Glad I could help!

YOU DID IT! Love the videos thank you so much!

@ProjectFarm

2 жыл бұрын

You are so welcome!

Great testing. That twisting test was ingenious! My favorites in use are the Kniprx, but I may pick up the Kleins after this.

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

First I say great test. Gives a good idea of the toughness of the pliers, however I must say that it is missing an important aspect which is real life usage experience. I don't think that someone buying this kind of pliers will put it - unless no other choice is available - to this kind of abuse. These are mostly used for delicate work, and the test give us no idea how they do in their designed usage. For example - how do they grip a a small diameter wire, how easy it is to do some gentle work with them, I would expect that working with those who have a stiff handle movement will tire the hand when doing delicate work, and so on. Thanks for the time and effort.

@ProjectFarm

2 жыл бұрын

You are welcome!

I love watching your videos. I have to admit it’s not always because of the useful information that you provide (and there is plenty of that.)I appreciate the willingness you show to create tests that you believe will give a reasonable representation of the functionality of the product. you are not afraid to show what a difficult process that is and what a compromise is being made when testing products to a standard. The pointed nose pliers are a particularly interesting problem in that this selection of pliers was clearly made up of tools which were designed for somewhat different applications. I like that you just create the tests that you think do the job and let the chips fall where they do.

@ProjectFarm

8 ай бұрын

Thanks so much!

Thanks for another fantastic product testing video

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!

Great testing!! If you do slip-joint/combination pliers make sure to include the Snap-On Talon Grip pliers (47ACF). They have diamond serrated on the nose of the pliers that grip in any direction very well! I have used these pliers for many years working on cars and they hold up much better than any others I have used. Even when holding a nut and using an impact on the bolt head.

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the suggestion.

@cpftank09

2 жыл бұрын

@TheCheesePlease not really. Overall it’s a solid brand. Some of their tools are far better than other brands. But they definitely have many tools that are just meh at best. Snap-ons locking pliers (vise grip style) are worse than the cheap ones harbor freight for instance. But those talon grip pliers take a crap ton of abuse and the amount of grip at any angle from the diamond serrated nose is amazing!!! I’ve used many slip-joint pliers and gotten busted knuckles from them slipping when I’m pulling on something and I’m willing to pay extra to prevent that!

This channel is so amazing! Every video I phenomenal! While watching this video I was wondering, why not measure the length of the handle in the cutting/grip tests and use NM to compare the pliers? That's a more apples to apples comparison because when just using straight up weight the short handeled pliers will almost always lose. I would love to see a comparison between ratchets (not the motorized kind) in the future!!

Well done - great tests!

@ProjectFarm

2 жыл бұрын

Thank you!

I just bought a 21 gallon air compressor and sure wish I had project farm's review before purchasing! Thanks for all the great videos!!!

@ProjectFarm

2 жыл бұрын

You are welcome! Thanks for the feedback.

Delivering the amazing content as always!!

@ProjectFarm

2 жыл бұрын

Glad you're here and thank you very much!

Hoping for a spray adhesive comparison. So many brands and product lines (3M alone has multiple popular ones, plus versions from Gorilla, LocTite, etc.)

@surfstarcc1

2 жыл бұрын

I like that one. 👍

@ProjectFarm

2 жыл бұрын

Thanks for the suggestion.

so consistently good keep em comin

@ProjectFarm

2 жыл бұрын

Thanks, will do!

Were gonna test that!!! Love it

@ProjectFarm

2 жыл бұрын

Thanks! I do too!

Always love watching these videos. Could you do a cable cutter review? there are a a lot or varieties of them

@FishFind3000

2 жыл бұрын

This and bolt cutter testing

@ProjectFarm

2 жыл бұрын

Thanks for the video idea.

I use Channel-Locks for all my hand tools and never had any problems with any of them. I specifically chose this brand since they were made in the USA. I am surprised they did so poorly on the twist test, not that I have ever used them for that level of extreme torque. I think a reach test, smallest item it can pick up, or small access test would have been beneficial, since that is the design purpose of the needlenose pliers.

@dc5723

2 жыл бұрын

I love my Channelocks. I go for them first before my Snap-ons or Knipex plers.

@ProjectFarm

2 жыл бұрын

Thanks for the feedback.

@cheesecurd100s

2 жыл бұрын

I had terrible luck with channel locks, but I'm also a mechanic in the rust belt and probably do more forceful twisting with needle nose trying to remove stubborn fasteners etc.

@Alpha-Leader

2 жыл бұрын

@@dc5723 I have a pair of old Irwin needlenose pliers that have lasted me for almost 20 years now. Probably the only pliers that are not Knipex that ride around with me.

@Savagetechie

2 жыл бұрын

I've never had much love for channelock, maybe just bad experience as I've only used their terrible slipjoints, where a tool is made has absolutely no meaning there are shit tools made everywhere and good tools in all markets too. Just buy the good tool not the flag waving bullshit, you'll end up with a better toolkit picking your tools on merit rather than country.

Thank you for this extremely useful content!

@ProjectFarm

4 ай бұрын

You're very welcome!

You are a legend, Todd! Great content, as always.

@ProjectFarm

Жыл бұрын

Thanks!

As an electricians apprentice, I was taught to take my new pliers, spray a little WD40 in the joint, and "exercise" them until the operated smoothly. Good tools will wear in without becoming loose, while still operating easily. Holding one handle, the other handle should drop under its own weight when let go. Another thing to be aware of is that some tool brands, such as Klien Tools, have several different grades of the same tool. One can purchase the tool that meets your needs and your budget.

@ProjectFarm

2 жыл бұрын

Thanks for sharing!

Great tests as usual, although MOST of the tasks on here I have better tools to do the job and would never use my needle nose pliers for. Example: I’ll use diagonal cutters or mini bolt cutters for nail cutting tasks.

@harryharry3193

Жыл бұрын

excatly. the real test is the ability to grap small things--springs..cables..and make them do what you want. not cutting nails. not twisting the crap out of them.

Thanks for such wonderful videos and this is quiet useful for our training engineer technicians as we are using frequently these tools practically at site

@ProjectFarm

2 жыл бұрын

Thanks for sharing.

Love your vids, keep up the good work!

@ProjectFarm

2 жыл бұрын

Thanks, will do!

I have had Channellock and Klein for over 10 years with moderate abuse and they are doing great. And an old pair of Craftsman, 40+ years old, that have stood up to farm use and abuse, and are still good.

@Surmoka

2 жыл бұрын

The old Craftsman was much better than today's Crapsman.

@ProjectFarm

2 жыл бұрын

Nice!

@pjhalchemy

2 жыл бұрын

Totally agree about the Craftsman +40 and Channellock ~15 but don't have the Kliens However I do have a pair of SnapON 7" 90° bent needle nose that are ~40 years old to and still pristine with lots of abuse. Prefer a long taper also. Typically don't abuse them like cutting hardened deck screws but everything else.

@Echowhiskeyone

2 жыл бұрын

@@pjhalchemy Yep. Usually only use the long nose for copper or small wire, nails and such if in a pinch. Anything heavier, I use lineman or bolt cutters.

@davidhughes4089

2 жыл бұрын

Farm use is the ultimate test 😄

Todd, your channel is at almost a half billion views, how crazy is that?

@ProjectFarm

2 жыл бұрын

Very hard to believe. I can't thank everyone enough for their continued support and encouragement. It keeps me going!!

Hey, absolutely LOVE your videos. I was looking for rubber pull up work boots and i thought, hey! that would be a great video for PF! Just throwing the idea out there!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the video idea.

Best youtube tester hands down!! I know we all appreciate that, thanks!!

@ProjectFarm

2 жыл бұрын

Wow, thank you!

Great tests as every week. If you haven’t done them yet, how about linesman pliers. Lots of things to test on them, as they get used for so many things. They should prove to be pretty tough as well…

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the suggestion.

@TRG972

2 жыл бұрын

Link to his linesman plier showdown: kzread.info/dash/bejne/Y3aFp9txmteaZ8o.html

@FowlerAskew

2 жыл бұрын

The first tool I bought with my own money (well, a Lowe's gift card) were Kobalt 7" lineman pliers that I've now had for over a decade, and they're still one of my favorite tools. I use them to grab stuff, bend stuff, cut stuff, hammer stuff, and they just seem to keep on working great

I've got a couple of the vamplier pliers but under the original japanese engineer brand and model range Nejisaurus, and I'm really impressed with them, plus under the engineer brand (in the uk at least) they are significantly cheaper. At the time of writing £31.08 vs £14.99 for the mini screw removal pliers.

@ProjectFarm

2 жыл бұрын

Thanks for sharing.

Watching this at 6am for absolutely no reason and it really just reminded me of those infomercials I used to see after the cartoons went off when I was young. His voice just tranquilized me.

@ProjectFarm

2 жыл бұрын

Thanks for watching!

I love these videos. Very informative. Now we know!

@ProjectFarm

2 жыл бұрын

Thanks!

Interesting effect of cultural differences. I’m German, living in the US for 20+ years. Needle nose pliers are used very differently in both cultures. For most of the tests you showed one would use a ‘Kombizange’ in Germany (combination pliers?). Needle nose are mostly used for electrical work and other light duty stuff. Might be similar in Japan maybe? Love the channel! Thanks.

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.

I think you should make another video on impact drivers. Great content!

@ProjectFarm

2 жыл бұрын

I'll definitely do it if there's enough interest. Hoping everyone with provide feedback as to whether or not it's worth a round 2. I'm willingto buy 12-15 brands this time so we can figure out which of many brands is the best.

These are always fantastic, and very helpful for someone like me, I cannot afford the expensive tools and often you find a reasonable priced tool that is very good quality. It means I only have to buy one tool and I can get a good quality compromise. I really appreciate it !!!!

@ProjectFarm

2 жыл бұрын

Thanks!

I've never used long nose pliers for cutting screws or 16d nails, so it's good to see that this type of pliers will hold up to the abuse. For me, I use long nose pliers for holding things, so the grab test was great to see. Also, I do abuse my pliers a little with a straight on twist and the cheapie pliers have bent or become out of alignment - your choice of test was spot on! I was surprised to see how well the less expensive pliers held up. I've owned Klein lineman pliers for years and I'm impressed by the quality and longevity, so I was very pleased to see how well they performed on your test. Your videos are awesome. I appreciate the hard work you do and I look forward to future tests!

@ProjectFarm

2 жыл бұрын

Thanks and you are welcome!