If you have factory-installed driver assistance systems in a modern vehcile, you do want to cut the brake light wire and install a Diode. This will prevent the Tow-Pro or anything else on the trailer feeding-back into the car. You can make your own diode, or use the RedArc Encapsulated Protection Device.

Nice work bud, love the detail on the HOW TO part rather then just saying do this, i like how you showed it,

Pleased to see you back online mate!!

Great vid mate.

Get well soon mate

latest versions don't use an ethernet cable and only come with a 1m cable, if you need a longer one you need to order it from redarc.

Nice idea with the ethernet cable. that will make it a lot easier for me. :)

Back of the car! best idea ever.

Sorry, where is the blue cable going? Break output? I don't understand....where ia the blue connected to? I'm deciding between redarc and hayman q controller. Thanks

How does it connect to your van....is this via 12 pin plug or specific Anderson plug.

Just did the block of wood with a hammer and it snapped both the locking tabs off. Cheers. Next time I will use a tiny screwdriver to unlock the tabs.

With this set up you have here, i.e. Tow Pro unit in the back. Do you still need the tow pro kit, or just the ethernet cable? I have a Landcruiser 200 series.

@DASHOffRoad

5 жыл бұрын

You still need the control knob at the front somewhere, but all the ugly stuff is hidden at the back

Good video, but there are better methods for joining the wires to maintain the insulation... EG: "Multiple Wire Connectors - In-Line & Close-End Connectors"

Hi Dave what sort of floor mats do you use? The standard carpet mat are crap for holding burrs we live in central NSW been looking at sandgrabba mats but there bloody dear what do you recommend? Thanks Heath.

@DASHOffRoad

5 жыл бұрын

I’ve just got the Nissan rubber mats. Seem to do the job

Good vid brudda

Hi mate l bought my self a tow pro Elite for my 91 model Mitsubishi Pajero to tow my boat trailer the connections l have done black wire to positive battery terminal white wire to negative battery terminal the red wire l joined with the brake lights wire which is the red wire closest to the socket for some reason there was no blue wire coming in to the socket so number 5 socket was empty so I connected the blue wire coming from the tow pro in to the number 5 socket so all I’m getting is a blue light on my control after pushing it to times and the blue light disappears l will be great fall if you can help me thanks Kemal

@DASHOffRoad

6 жыл бұрын

Hey, I’m happy to help but I’m not free. Support me on Patreon and I’ll work it out with you. Cheers

With respect to the ethernet cable - you don't happen to remember if it was a 'straight through' cable or a 'twisted pair' cable? Great helpful vid btw.

@DASHOffRoad

4 жыл бұрын

It wasn’t a crossover if that’s what you were asking. Cheers

@reggi34dr

4 жыл бұрын

@@DASHOffRoad ah yep, crossover is what I was trying to think of. Have you had any issues with your EBC since install?

It's a pity the TowPro Elite V3 no longer uses Ethernet plugs.......:-(

@DASHOffRoad

3 жыл бұрын

Agreed

Do you think it possible to run it off my dual battery in the back of my ranger?

@DASHOffRoad

6 жыл бұрын

keithy0000 should be ok. Mines running off my duel battery from under the bonnet. Just remember if it goes flat from running your fridge or something, you’ll hav no brakes. If youve got a smart solonoid connecting your duel battery to the start battery you’ll be fine as they are all connected when the engine is running

Don't let your nurse see you.

Gyroscope 😂 mounting in the back?? Resistance and voltage drop on the input circuit is most important.. your right don’t need to be an Auto Electrician.. but to get it done correctly don’t DIY safety features for towing! 🤦‍♂️

They have changed the data cable to a useless cable now so you cant do this install (V3). It all has to be in the cab and is a pain.

@DASHOffRoad

5 жыл бұрын

Oh really, that sucks!

@neiltube8004

5 жыл бұрын

You can order longer cables - up to 6m

@tombobtail7706

5 жыл бұрын

@@neiltube8004 Hardly what you want to do after just ordering a kit and finding the cable too short to use in most places. To be honest the unit isn't that great, Ive used it now and the brakes seem to either lock up or do nothing.

@neiltube8004

5 жыл бұрын

@@tombobtail7706 who installed it ? If you are getting full voltage with the dial turned down something is wrong . Mine works just the same as my tekonsha so far.

@tombobtail7706

5 жыл бұрын

@@neiltube8004 I installed it, they are drum brakes so they don't do anything up until the point that the unit locks them. I just think that the whole exercise of having a progressive braking unit on drum brakes is pointless. I guess it does have its benefits though. My main problem is that I bought it based on an image showing a data cable which wasn't updated. So I ended up with this crappy install in the front. I could have bought a $20 unit that went there to tick legal boxes.