yellow dispenser yay more runs coming soon the 233 could have been way better
Жүктеу.....
Пікірлер: 86
@yellqw8067 Жыл бұрын
That yellow dispenser mech is the coolest thing ive seen in a while
@RileyMarkley Жыл бұрын
Great job!
@disownedrock Жыл бұрын
nice work!
@landonvo3098 Жыл бұрын
Do you have tips for having the disks from blue to not jam? I tried using a plate that freely swings on an axle like yours but I can't get it to work
@omkar5104 Жыл бұрын
woah that arm is sick
@WillLeingang Жыл бұрын
I look forward to you beating us at worlds 😂
@Rovers48495A Жыл бұрын
0:22 sustin toes be reql sussy
@Randomuser17488
Жыл бұрын
💀
@Vortex-ex6bq Жыл бұрын
Do you have any tips for making the yellow dispenser mechanism. My problem is that I can’t get it long enough to reach into the yellow to collect it, and fit down ways above the ground, and when I make it taller it’s to tall to get the yellow dispenser. I’m thinking that making a gap in the back of the robot and using a small gear as the bottom one for the chain will help, does it?
@austinsus13194A
Жыл бұрын
what i did is i made the disk basket for the yellow dispenser hinge, which means that it can like fold to fit when it swings into the robot. kzread.info/dash/bejne/pJ5nxZVwiMbPdJc.html if you watch this video, in the first match, the far side robot has a basket that can fold when it collects the blue dispenser. mine is like that.
@Vortex-ex6bq
Жыл бұрын
Another question, what did you do to get you shooter so strong and fast with only motor. I have to use a gear ration for mine. Is it the type of rubber bands you use?
@Randomuser17488
Жыл бұрын
@@Vortex-ex6bq me and Austin just used some random ones we found
@Vortex-ex6bq
Жыл бұрын
Do you use like an 1 by six or something like that then instead of the green windmill piece?
@landonvo3098
Жыл бұрын
@@Vortex-ex6bq They use 1 by 5s
@chunkychungus-k3d Жыл бұрын
please sir show mercey
@kyleclayton7855 Жыл бұрын
Hey, it’s my first year in vex ( and my whole schools first year) and we had our first competition yesterday we did alright for our first competition but we still have the basic bot and it doesn’t do to good lol do you have and suggestions on how it where to modify it?
@landonvo805
Жыл бұрын
I would focus on making a quick shooter with either flywheel or puncher and focus on blue and purple dispenser mechanisms
@Randomuser17488
Жыл бұрын
Also try to make a better way to organize the disks so nothing gets stuck and everything goes smoothly (if you do a slapshooter)
@Randomuser17488
Жыл бұрын
But for both make sure you find good ways to capture the disks and a good tray to put the disks in. Remember just keep finding new ways to improve
@dylanfang3060 Жыл бұрын
Did you use second gen parts like the linear motion things for the conveyer belt for the yellow mechanism or is it just a basic chain and sprocket. Also nice robot.
@austinsus13194A
Жыл бұрын
It’s just a chain
@dylanfang3060
Жыл бұрын
💀
@austinsus13194A
Жыл бұрын
@@dylanfang3060 that’s what allows it to flip under the bot when it’s done
@parkerbrayman5130 Жыл бұрын
How are you able to trigger your bonus point arm without a motor?
@7Lucas7
Жыл бұрын
Just bumping the wall
@aalokkumar6054 Жыл бұрын
Hi we are trying to figure out how to do yellow dispenser mech, can you help us in any way? With like photos or references?
@austinsus13194A
Жыл бұрын
I can’t give you any photos, but it’s just a conveyor with a little basket attached.
@jaydenmoon8867 Жыл бұрын
insane never seen something like that
@austinsus13194A
Жыл бұрын
i cant tell if ur joking or not
@jaydenmoon8867
Жыл бұрын
@@austinsus13194A im not actually
@andrewhe4981 Жыл бұрын
How did you make the shooter fast and strong enough with only one motor?
@akivanadata8214
Жыл бұрын
How i did it was i made it with 2 on the same axel
@codycodes7527 Жыл бұрын
can you use a rubber band to force the reacher unextended but just have your drive brakes stronger than the rubber band, then you can just back up if you miss
@austinsus13194A
Жыл бұрын
I changed it a bit, now it never misses
@codycodes7527
Жыл бұрын
@@austinsus13194A that works too
@shyambhagat1776 Жыл бұрын
Are u using 2nd gen parts for the yellow mechanism or is it just first gen
@austinsus13194A
Жыл бұрын
First gen
@shyambhagat1776
Жыл бұрын
@@austinsus13194A I’m struggling to attach the purple dispenser beside the double shooter Any tips
@austinsus13194A
Жыл бұрын
@@shyambhagat1776 yeah you just have to figure it out, we struggled a bit to get it to fit. Try to make your mechanism as slim as possible and also make your supports slim so you can fit it. Our purple mechanism is like right on the size limit
@NevinTheGreatOne Жыл бұрын
Great robot! What are your gear ratios?
@austinsus13194A
Жыл бұрын
shooter is 1:1, drive is 2:1, purple is 20:1, blue is 2:1, and yellow is 1:1
@Nameless65656Z Жыл бұрын
OMG!!!!🥰🥰
@beguglacat4394 Жыл бұрын
"233 is ok I guess" also why arent you driving in the drivers box
@austinsus13194A
Жыл бұрын
? i am
@beguglacat4394
Жыл бұрын
@@austinsus13194A oh wait it looks like you arent nvm
@riaankapoor6186 Жыл бұрын
That is one way to get yellown
@VBFStacking Жыл бұрын
common austin sus W
@comets_ Жыл бұрын
drops disc puts back i robot vex gods no
@russellbrebner7664 Жыл бұрын
Might wanna check if your red extension arm release goes over the grey bar when shooting. Pretty sure that is illegal to have anything break the plane of the grey bar.
@austinsus13194A
Жыл бұрын
the release does not cross into the 2 point zone but it is right above the bar. im not sure if this is legal or not and im pretty sure there is a debate about it going on right now. i havent been stopped or disqualified at any competitions, so i really dont know. only time will tell.
@exortions3079
Жыл бұрын
@@austinsus13194A apparenlty it's illegal to be over the bar as well, I got dequeued a few times b/c of it
@austinsus13194A
Жыл бұрын
@@exortions3079 my interpretation is that going over the bar is legal, but not into the 2 point zone. " Don’t cross the Fence Line until Contact. Robots may only extend over the Fence Line and 'break the plane' of the 3-dimensional area of the 2-Point Goal Zone if they are contacting the Expansion Zone." The game manual mentions "breaking the plane" of the 2 point goal zone, which is on the "scoring zone" side of the line. a piece over the bar would not "break the plane" of the 2 point zone, so i think mine is legal. hope this will clear some things up and help you win the next argument with refs.
@exortions3079
Жыл бұрын
@@austinsus13194A weird, i got dq’d by going over it,not even crossing
@austinsus13194A
Жыл бұрын
@@exortions3079 yeah the rules here are kinda fuzzy and that’s just my interpretation (I think it’s the most accurate interpretation.) next time it happens, it’s probably worth it to appeal the dq with judges and bring up that rule.
@aryamansingh3606 Жыл бұрын
flywheel >:)
@andrewfriedman6174 Жыл бұрын
Someone clearly hasnt been practicing their driving
@Xh3non
Жыл бұрын
says u
@austinsus13194A
Жыл бұрын
@@Xh3non lol that’s my old teammate we got 3rd in worlds together. he’s roasting me for missing the purple 3 times in a row
@andrewfriedman6174 Жыл бұрын
Nice robot though it looks a little chunky
@austinsus13194A
Жыл бұрын
I don’t think the weight is much of a problem, unlike in frc
@ericlai2316 Жыл бұрын
i look forward to win another world championship 16868b forever go 16868b also are you the taiwan team
@austinsus13194A
Жыл бұрын
…no im from texas
@Rovers48495A
Жыл бұрын
Lol
@emeraldsts6088 Жыл бұрын
austin bro
@jcbots984 Жыл бұрын
Lol he just said 233 is kinda okay...
@prestonchristensen2531 Жыл бұрын
nice design! could you specify where all of the motors are placed?
@austinsus13194A
Жыл бұрын
2 drive, 1 shooter, 1 purple dispenser spinner, 1 yellow dispenser carriage, 1 blue dispenser lever
@Rovers48495A Жыл бұрын
NOO WHY U POST NOW. PPL WILL THINK I COPIED WHEN I FINISHED MY ROBOT
@Rovers48495A
Жыл бұрын
Also are u going to worlds? If u r pls pair up with us
@flyingcheese22608a Жыл бұрын
Austin! Go to sleep! You have school tomorrow!
@austinsus13194A
Жыл бұрын
Haha
@flyingcheese22608a
Жыл бұрын
yes but like litterly, u cant stay up all night lol
@anirvdh Жыл бұрын
sustin aus
@codycodes7527 Жыл бұрын
omg austin sus face reveal
@Rovers48495A Жыл бұрын
Hey, we finished our intakes but the disks keep jamming :/ How do u solve that problem? Also do u have discord or something that we can talk to u easily on?
@austinsus13194A
Жыл бұрын
the disks are most likely jamming because of 2 reasons: 1. your magazine/stack tubes don't match the shape of the disk very well, meaning a disk can fall vertically and stay that way. if you are using curved plastic sheets as your stacks, then that is most likely not the problem. 2. multiple disks fall sideways into the stacks at once. to fix this, you should add blockers so the disks can't fall sideways and only 1 can go in at a time. personally, tuning these blockers takes a while to get right, but it is worth it. if you are in the ex machina discord server, i am there
@Rovers48495A
Жыл бұрын
@austinsus4716 Ok thx for the advice. I joined the server
@guru-gs4dk
Жыл бұрын
orange stilll on feild
@shyambhagat1776
Жыл бұрын
@@austinsus13194A what do you mean by blockers? Also could you post a video explaining purple dispenser
@Vex839Z Жыл бұрын
For free???
@lucasbassuk3796 Жыл бұрын
W face reveal
@Randomuser17488
Жыл бұрын
Bro watch his other videos, this isn’t really a face reveal
Пікірлер: 86
That yellow dispenser mech is the coolest thing ive seen in a while
Great job!
nice work!
Do you have tips for having the disks from blue to not jam? I tried using a plate that freely swings on an axle like yours but I can't get it to work
woah that arm is sick
I look forward to you beating us at worlds 😂
0:22 sustin toes be reql sussy
@Randomuser17488
Жыл бұрын
💀
Do you have any tips for making the yellow dispenser mechanism. My problem is that I can’t get it long enough to reach into the yellow to collect it, and fit down ways above the ground, and when I make it taller it’s to tall to get the yellow dispenser. I’m thinking that making a gap in the back of the robot and using a small gear as the bottom one for the chain will help, does it?
@austinsus13194A
Жыл бұрын
what i did is i made the disk basket for the yellow dispenser hinge, which means that it can like fold to fit when it swings into the robot. kzread.info/dash/bejne/pJ5nxZVwiMbPdJc.html if you watch this video, in the first match, the far side robot has a basket that can fold when it collects the blue dispenser. mine is like that.
@Vortex-ex6bq
Жыл бұрын
Another question, what did you do to get you shooter so strong and fast with only motor. I have to use a gear ration for mine. Is it the type of rubber bands you use?
@Randomuser17488
Жыл бұрын
@@Vortex-ex6bq me and Austin just used some random ones we found
@Vortex-ex6bq
Жыл бұрын
Do you use like an 1 by six or something like that then instead of the green windmill piece?
@landonvo3098
Жыл бұрын
@@Vortex-ex6bq They use 1 by 5s
please sir show mercey
Hey, it’s my first year in vex ( and my whole schools first year) and we had our first competition yesterday we did alright for our first competition but we still have the basic bot and it doesn’t do to good lol do you have and suggestions on how it where to modify it?
@landonvo805
Жыл бұрын
I would focus on making a quick shooter with either flywheel or puncher and focus on blue and purple dispenser mechanisms
@Randomuser17488
Жыл бұрын
Also try to make a better way to organize the disks so nothing gets stuck and everything goes smoothly (if you do a slapshooter)
@Randomuser17488
Жыл бұрын
But for both make sure you find good ways to capture the disks and a good tray to put the disks in. Remember just keep finding new ways to improve
Did you use second gen parts like the linear motion things for the conveyer belt for the yellow mechanism or is it just a basic chain and sprocket. Also nice robot.
@austinsus13194A
Жыл бұрын
It’s just a chain
@dylanfang3060
Жыл бұрын
💀
@austinsus13194A
Жыл бұрын
@@dylanfang3060 that’s what allows it to flip under the bot when it’s done
How are you able to trigger your bonus point arm without a motor?
@7Lucas7
Жыл бұрын
Just bumping the wall
Hi we are trying to figure out how to do yellow dispenser mech, can you help us in any way? With like photos or references?
@austinsus13194A
Жыл бұрын
I can’t give you any photos, but it’s just a conveyor with a little basket attached.
insane never seen something like that
@austinsus13194A
Жыл бұрын
i cant tell if ur joking or not
@jaydenmoon8867
Жыл бұрын
@@austinsus13194A im not actually
How did you make the shooter fast and strong enough with only one motor?
@akivanadata8214
Жыл бұрын
How i did it was i made it with 2 on the same axel
can you use a rubber band to force the reacher unextended but just have your drive brakes stronger than the rubber band, then you can just back up if you miss
@austinsus13194A
Жыл бұрын
I changed it a bit, now it never misses
@codycodes7527
Жыл бұрын
@@austinsus13194A that works too
Are u using 2nd gen parts for the yellow mechanism or is it just first gen
@austinsus13194A
Жыл бұрын
First gen
@shyambhagat1776
Жыл бұрын
@@austinsus13194A I’m struggling to attach the purple dispenser beside the double shooter Any tips
@austinsus13194A
Жыл бұрын
@@shyambhagat1776 yeah you just have to figure it out, we struggled a bit to get it to fit. Try to make your mechanism as slim as possible and also make your supports slim so you can fit it. Our purple mechanism is like right on the size limit
Great robot! What are your gear ratios?
@austinsus13194A
Жыл бұрын
shooter is 1:1, drive is 2:1, purple is 20:1, blue is 2:1, and yellow is 1:1
OMG!!!!🥰🥰
"233 is ok I guess" also why arent you driving in the drivers box
@austinsus13194A
Жыл бұрын
? i am
@beguglacat4394
Жыл бұрын
@@austinsus13194A oh wait it looks like you arent nvm
That is one way to get yellown
common austin sus W
drops disc puts back i robot vex gods no
Might wanna check if your red extension arm release goes over the grey bar when shooting. Pretty sure that is illegal to have anything break the plane of the grey bar.
@austinsus13194A
Жыл бұрын
the release does not cross into the 2 point zone but it is right above the bar. im not sure if this is legal or not and im pretty sure there is a debate about it going on right now. i havent been stopped or disqualified at any competitions, so i really dont know. only time will tell.
@exortions3079
Жыл бұрын
@@austinsus13194A apparenlty it's illegal to be over the bar as well, I got dequeued a few times b/c of it
@austinsus13194A
Жыл бұрын
@@exortions3079 my interpretation is that going over the bar is legal, but not into the 2 point zone. " Don’t cross the Fence Line until Contact. Robots may only extend over the Fence Line and 'break the plane' of the 3-dimensional area of the 2-Point Goal Zone if they are contacting the Expansion Zone." The game manual mentions "breaking the plane" of the 2 point goal zone, which is on the "scoring zone" side of the line. a piece over the bar would not "break the plane" of the 2 point zone, so i think mine is legal. hope this will clear some things up and help you win the next argument with refs.
@exortions3079
Жыл бұрын
@@austinsus13194A weird, i got dq’d by going over it,not even crossing
@austinsus13194A
Жыл бұрын
@@exortions3079 yeah the rules here are kinda fuzzy and that’s just my interpretation (I think it’s the most accurate interpretation.) next time it happens, it’s probably worth it to appeal the dq with judges and bring up that rule.
flywheel >:)
Someone clearly hasnt been practicing their driving
@Xh3non
Жыл бұрын
says u
@austinsus13194A
Жыл бұрын
@@Xh3non lol that’s my old teammate we got 3rd in worlds together. he’s roasting me for missing the purple 3 times in a row
Nice robot though it looks a little chunky
@austinsus13194A
Жыл бұрын
I don’t think the weight is much of a problem, unlike in frc
i look forward to win another world championship 16868b forever go 16868b also are you the taiwan team
@austinsus13194A
Жыл бұрын
…no im from texas
@Rovers48495A
Жыл бұрын
Lol
austin bro
Lol he just said 233 is kinda okay...
nice design! could you specify where all of the motors are placed?
@austinsus13194A
Жыл бұрын
2 drive, 1 shooter, 1 purple dispenser spinner, 1 yellow dispenser carriage, 1 blue dispenser lever
NOO WHY U POST NOW. PPL WILL THINK I COPIED WHEN I FINISHED MY ROBOT
@Rovers48495A
Жыл бұрын
Also are u going to worlds? If u r pls pair up with us
Austin! Go to sleep! You have school tomorrow!
@austinsus13194A
Жыл бұрын
Haha
@flyingcheese22608a
Жыл бұрын
yes but like litterly, u cant stay up all night lol
sustin aus
omg austin sus face reveal
Hey, we finished our intakes but the disks keep jamming :/ How do u solve that problem? Also do u have discord or something that we can talk to u easily on?
@austinsus13194A
Жыл бұрын
the disks are most likely jamming because of 2 reasons: 1. your magazine/stack tubes don't match the shape of the disk very well, meaning a disk can fall vertically and stay that way. if you are using curved plastic sheets as your stacks, then that is most likely not the problem. 2. multiple disks fall sideways into the stacks at once. to fix this, you should add blockers so the disks can't fall sideways and only 1 can go in at a time. personally, tuning these blockers takes a while to get right, but it is worth it. if you are in the ex machina discord server, i am there
@Rovers48495A
Жыл бұрын
@austinsus4716 Ok thx for the advice. I joined the server
@guru-gs4dk
Жыл бұрын
orange stilll on feild
@shyambhagat1776
Жыл бұрын
@@austinsus13194A what do you mean by blockers? Also could you post a video explaining purple dispenser
For free???
W face reveal
@Randomuser17488
Жыл бұрын
Bro watch his other videos, this isn’t really a face reveal
@lucasbassuk3796
Жыл бұрын
@@Randomuser17488 i know
@Randomuser17488
Жыл бұрын
@@lucasbassuk3796 oh mb then