It's worse than I thought...once again (building a Tiny House)

this week I am facing my water damage problems with my tiny house aaaand I am taking a very cool trip to New York City to work with Tyler Hays and Tom Sachs
visit my shop:
www.laurakampf.shop
If you like what i do you can support me at
/ laurakampf
Camera: Felix Schelhasse
Editor: Felix Schelhasse
For more Infos visit
www.laurakampf.com
/ laura_kampf
/ laurakampfofficial
The brands and friends I work with
www.festool.de
www.festool.co.uk
www.leatherman.com/de_DE/home
www.lincolnelectric.com
www.pferd.com
www.pica-marker.com/en

Пікірлер: 911

  • @kouyopoto
    @kouyopoto Жыл бұрын

    Hey Laura, I'm an architect with a lot of experience on insulation and renovation, and I also helped my little brother build three tiny houses. A small advice : you should definitely consider installing a vapor barrier between the interior finish and the insulation, and get a good ventilation system. You're concerned about the water from outside, but the water from inside can soon become really problematic in such a small space : vapor from inside will go through the interior walls, then through the insulation, and be stopped by the rain barrier, with no way to escape. Also a good thing would be a barrier (i think it's called tarp in english) between the wood and the metal structure underneath, to prevent any rottening

  • @LewHarriman

    @LewHarriman

    Жыл бұрын

    But notice that she used one of those very nice, high-quality, rather expensive vapor-open air barrier membranes on the outdoor side of the insulation-NOT a vapor barrier. With that membrane, vapor can pass through and "dry to the outside". The risk of excessive moisture accumulation in her insulation is much less-perhaps even zero, given that little or no cooking or washing is going on inside. (But excellent reminder that an airtight enclosure needs ventilation! A small Panasonic wall-mounted ERV would do quite nicely. They're pretty quiet.)

  • @pile_of_kyle

    @pile_of_kyle

    Жыл бұрын

    @@LewHarriman Just curious: what's the difference between a ventilation system (ERV?) and a dehumidifier?

  • @biobuu4118

    @biobuu4118

    Жыл бұрын

    @@pile_of_kyle ventilation system extract and renew air from outside, dehumidifier will capture humidity from air and fill a bucket of water

  • @astranger448

    @astranger448

    Жыл бұрын

    @@LewHarriman Yep, noticed the same thing, because I used a similar material in my build ages ago. All that was needed was to let the whole thing dry out, can't make youtube content with 'waiting for stuff to dry' tho ;-). I also very much agree with your point about ventilation, especially with the 'real' fire for heating, CO is a killer.

  • @astranger448

    @astranger448

    Жыл бұрын

    @@pile_of_kyle Energy Recovery Ventilation, letting the smell out while keeping the heat in.

  • @KnitsFromTheVoid
    @KnitsFromTheVoid Жыл бұрын

    Strategy 1: start a pleasant lil tiny house project so that you have a positive experience and a break from the never-ending work on the big house. Strategy 2: start a horror-show of a tiny house project so that going back to working on the big house will feel pleasant and easy.

  • @FreakyNotje
    @FreakyNotje Жыл бұрын

    Close the holes in the floor with some perforated steel, otherwise mice will love the insulated nesting area in your floor. I know this from own experience.

  • @gallerytwentyeight

    @gallerytwentyeight

    Жыл бұрын

    YES. If there is the TINIEST hole.....mice WILL find it. It's their job. Laura's dog, will, of course be going bananas.

  • @manfredschmalbach9023

    @manfredschmalbach9023

    Жыл бұрын

    And then, it still might become a yellow-jacket paradise.

  • @pollyb.4648

    @pollyb.4648

    Жыл бұрын

    Yes, I thought she meant inspection holes from inside!

  • @yao_barna
    @yao_barna Жыл бұрын

    In Argentina we have a say that goes something like "no calm sea made an expert sailor". Keep going on! 💪💪💪

  • @sherriek3476

    @sherriek3476

    Жыл бұрын

    I love that saying .so true and beautiful

  • @discoj7112
    @discoj7112 Жыл бұрын

    At least there aren't any ants!

  • @EmilySmucker
    @EmilySmucker Жыл бұрын

    Did anyone else hear "life jacket" and immediately think Laura's special jacket was going to keep you afloat if you ever fell into water? Because I sure did 😆

  • @NailahRoberts

    @NailahRoberts

    Жыл бұрын

    Yeap 😂

  • @SuperBigCamel

    @SuperBigCamel

    Жыл бұрын

    Jep

  • @Boo-Stein

    @Boo-Stein

    Жыл бұрын

    Yes, I was going to say the same thing 👍🏻

  • @missglenellen

    @missglenellen

    Жыл бұрын

    Yes, I too was thinking, why does she need a life jacket (if it’s only water damage 😉 )

  • @MrBigMalT

    @MrBigMalT

    Жыл бұрын

    I thought oh god, the water damage is worse than we thought…. Laura needs a life jacket 😅

  • @Aysha470
    @Aysha470 Жыл бұрын

    There has been a series of mistakes that led to this outcome and potentially a few more: As many have pointed out, the exterior should have been finished and sealed properly, starting from the ceiling, before you started working on the interior, and given the weather forecast for heavy rainfalls, it should have been constructed under the cover of your workshop. The framing boards you used were not treated or pressure-treated, and were set directly on a metal surface with rust. Overtime, this will lead to condensation and rust be accumulated and absorbed by the framing and the seams of the plywood basis on the platform, which can lead to the development of fungi and pests such as termites and ants. The inspection holes drilled under the basis were left unattended for at least a few days, which can be enough time for the interior to be populated with insects or mice. The fastening of the frame onto the platform does not seem to be structurally sufficient for the structure to be able to withhold the acceleration forces it will be inevitably subjected to when moving the house from place to place. It needs to be fastened with proper construction graded screws and bolts without drilling holes on the frame with Forstner bits, as this adversely impacts the structural integrity of the beams. Neither the flue hole on the wall above the stove, nor the windows seem to have been properly insulated and sealed against water with appropriate sealants. In addition, the flue cap which is inevitably exposed to the rain did not have the proper shape to stop the wind-driven rain from entering the pipe. There are flue caps that are especially designed to block the wind-driven rain.

  • @nbasse

    @nbasse

    Жыл бұрын

    This really needs to reach Laura!

  • @bzuidgeest

    @bzuidgeest

    Жыл бұрын

    I don't think this house is meant to move around a lot. Just rolling it in place. The other stuff yes, but learning is part of it. Though the lessons can be expensive.

  • @lisahodges8299

    @lisahodges8299

    Жыл бұрын

    Try not to be too judgemental, Laura needed to get a roof over her head. It is to be hoped Laura will read this and give us the happy ending she deserves. Birdy

  • @joelsels8986

    @joelsels8986

    Жыл бұрын

    Don’t forget the vapourbarriors! It’s also absolutely needed in the inside between de finishing and the wooden structure. That way damp in the air doesn’t get behind the finishing in the insulation. It’s also good for later not to see the lumber appear as darker spots on your wall

  • @blacksquirrel4008

    @blacksquirrel4008

    Жыл бұрын

    Yeah, I’m unsubscribing, watching her make obvious mistakes leading to these avoidable disasters every week is not worth the stress.

  • @bluechang08
    @bluechang08 Жыл бұрын

    Surely the best solution was to get the building watertight before starting the internal aspects as you're opening yourself up to having to undo and redo all of the work when a problem occurs. The roof should be sorted now, whilst the leaking issues are being sorted to ensure no further leaks occurs in future.

  • @deannam1981

    @deannam1981

    Жыл бұрын

    yep. this is why houses get finished on the outside before the inside is started. button up the outside and get it weather proof, then do the inside. the house must not be level if all the water is flowing to that one side. level it on big wood blocks and that will make it easier to build. did they square the walls before they did the walls? i also think the windows are all going to crack once this thing moves because they didn't do anything to secure the walls from moving.

  • @insu_na

    @insu_na

    Жыл бұрын

    @@deannam1981 there's a reason why Fachwerk uses diagonals

  • @db-ws9yn

    @db-ws9yn

    Жыл бұрын

    Yup, nothing about building a tiny house is new or mysterious, and there are industry standards for construction for a reason. One of the most basic concepts is to get the shell weather-tight before spending any effort on the interior. There is no reason to do this project without knowing the construction basics since they are so well-tested and documented. Doing even a little research and appreciating how others do things (and their knowledge) would keep errors like these and those at the other house from happening.

  • @uytteb

    @uytteb

    Жыл бұрын

    @@db-ws9yn If I'm not mistaken, she was waiting for a delivery to finish the roof and the siding. Not wise to start working on the inside in the meantime, but there is the time constraint issue. Also, she did have a kind of canopy/tent structure to cover the trailer, but there's probably only so much that can do. Finally, your tone of voice comes across as a bit arrogant, even though your comments are surely meant to be constructive.

  • @stephanieonlife3657

    @stephanieonlife3657

    Жыл бұрын

    I agree

  • @anderseb
    @anderseb Жыл бұрын

    You need to use a dehumidifier and some heat to make sure that everything is dry before you start building again.

  • @donnacrozier3327
    @donnacrozier3327 Жыл бұрын

    I have got my mum into your channel and she’s now a big fan. She went through the highs and lows with you on the big house. She loves your positive attitude, your pure joy for making things and the way you bounce back after setbacks. My mum fell and broke her hip last week, she’s back home and we watched the latest videos together on the little house. She is upset on your behalf about the water damage, but wishing you all the best for the repair. Mum is also a HUGE fan of Felix , working with someone helps and you two are so funny and entertaining. Thanks for indirectly helping with my mum’s recovery and her mood.

  • @laurakampf

    @laurakampf

    Жыл бұрын

    Tell her I wish her a fast recovery ❤️

  • @Anna.Maria.Muller

    @Anna.Maria.Muller

    Жыл бұрын

    @@laurakampf Dido to all Donna said. You are a refreshing part of my day.

  • @katejudson8907

    @katejudson8907

    Жыл бұрын

    @@laurakampf hey, I commented recently and a spammy looking profile tried to get me to chat on telegram. Just thought you might need to know this. Love your channel and hate to think you have to deal with zombie shit like that ❣️

  • @AlannaCoca_

    @AlannaCoca_

    Жыл бұрын

    @@katejudson8907 Same!

  • @jeffmay1024
    @jeffmay1024 Жыл бұрын

    My opinion is whether it’s damp or wet you can still get mold.

  • @greenknitter

    @greenknitter

    Жыл бұрын

    As an Irish person living in the dampest most humid country in Europe I agree. Dampness is just a step below and mold will quickly take hold if not tackled with adequate ventilation and breathable materials.

  • @DavidL-ii7yn
    @DavidL-ii7yn Жыл бұрын

    The short-term leakage is one thing, but longer term, think about exhalation from a person and cooking. It's a lot of water a day! If you seal a building tight for energy efficiency, you can easily create a situation where the moisture can't be removed. I accidentally created this situation in an structure I built and over-sealed... over time the water became inches deep.

  • @4819632011
    @4819632011 Жыл бұрын

    #1 rule of building, make sure your structure is dried in before doing the pretty stuff.

  • @jelsner5077
    @jelsner5077 Жыл бұрын

    When you rebuild, you must get a finished roof on before insulating and finishing the interior. Follow the logical order so you don't have to redo past work.

  • @73Ferret

    @73Ferret

    Жыл бұрын

    Yeah, its a shame there.seemed to be such a panic going on that obviously affected the normally impeccable logic! Hopefully lesson learned.

  • @vennic

    @vennic

    Жыл бұрын

    Honestly when I saw them building it I thought they were just going to park it in the shop until they were done with the exterior

  • @timesmasquerade2012

    @timesmasquerade2012

    Жыл бұрын

    Bull’s Eye.

  • @cdoublejj

    @cdoublejj

    Жыл бұрын

    yeah i don't mean to hate and i really like this series AND I DO GET SHE HAS A GRAND ROOF BUT, i feel like it was one of those derpy send it yoloy and hope for the best plans waiting for the grand roof to be put on later in bad weather. we all make mistakes but at least people get to see the importance of a finished foor ASAP. also at least it wasn't worse requiring a full demo.

  • @dignan17

    @dignan17

    Жыл бұрын

    Indeed. I was so perplexed by this. She says her take-away is to not build houses in the winter when it's rainy. Homes are built all over the world during rainy seasons. New homes sit with their framing exposed to the weather all the time. But they get closed in and aired out in the right order so the interior can be completed in a house that can't get wet again. I'm getting nervous for how she completes her big house now. I really hope she doesn't repeat this mistake. Finish the outside first!!!

  • @davidsaxby5400
    @davidsaxby5400 Жыл бұрын

    I admire Felix. He has become a great friend and support for Laura and his humour often turns bad situations into bearable ones.

  • @rc31802
    @rc31802 Жыл бұрын

    Oh no. I'm so glad you found all of this. As others have said, it is educational.

  • @thomass7880
    @thomass7880 Жыл бұрын

    Hey Laura, you can check the waterproofnes of the house with your smoke machine, you Fire it in the House and can she any leaks from the Outside.

  • @TheCatlady63
    @TheCatlady63 Жыл бұрын

    surely its better to stop the water ingress then sort the inside????

  • @NinaThoren
    @NinaThoren Жыл бұрын

    Looking on the bright side, this has now turned into a very educational series for everyone thinking of building a tiny house (I'm one of them!) and what to do when problems arise. Hope it only goes up from here on out

  • @greenknitter

    @greenknitter

    Жыл бұрын

    Or what not to do so you won't have problems in the first place...such as not building out the interior before you have a watertight building.

  • @NinaThoren

    @NinaThoren

    Жыл бұрын

    @@greenknitter Yes, very true and should maybe have kept it under the roofing too (If it was under the open sky during the storm)

  • @patriciaharkin1571
    @patriciaharkin1571 Жыл бұрын

    Oh Laura, I felt physically sick when I saw that water damage. Thank God you seem to have such a sunny disposition, you assess, plan and fix, all the while with a smile. I wish you nothing but the best in all your ventures.

  • @inMuro

    @inMuro

    Жыл бұрын

    this is such a sunny comment in the big sea of bad tempered advisors. Thanks for saying exactly what I was thinking! Go Laura

  • @xtreamchance
    @xtreamchance Жыл бұрын

    Hindsight is 20/20, but if one had to build in similar circumstances, the rule, I've been told is... Build water/snow tight walls and roof, with working gutters if the Tiny House must be outside, before building anything interior. Once exceptionally sure that the outer shell is water/snow tight, then proceed to insulate and finish the inside. I was told this by old men who have had experience with such things. I would probably have been told the same thing by old women as well, but I didn't ask any. Better process next time.

  • @Preske
    @Preske Жыл бұрын

    it's probably going to be easier to start everything over. check all the walls and ceilings. And get your Tiny House inside or something, where it's completely save from the weather. Or Harry is going to win :D

  • @bzuidgeest

    @bzuidgeest

    Жыл бұрын

    But needed, even without opening everything up, eventually it is going to dry out. As long as the leaks are fixed.

  • @BakerGlare

    @BakerGlare

    Жыл бұрын

    Harry must not win! Harry darf einfach nicht gewinnen!!

  • @Varadiio

    @Varadiio

    Жыл бұрын

    Seriously! Her shop was designed for vehicles. Get that house inside!

  • @BakerGlare

    @BakerGlare

    Жыл бұрын

    @@Varadiio I don't actually think there's enough room inside. Pretty sure the wood storage loft/mezzanine is too low to accomodate for it, for starters :/ Would be great content if she could put it inside and go absolutely ham on it, though!

  • @recoveringsoul755

    @recoveringsoul755

    Жыл бұрын

    Yes, needs to get it indoors to completely dry out, put a secure waterproof roof on it, before doing the inside

  • @EvaWaffel
    @EvaWaffel Жыл бұрын

    Großen Respekt zu deinem Umgang mit dem Wasserschaden! Als angehende Tischlerin finde ich die Idee der Jacke total super, allerdings befürchte ich mal stark das die ganzen Späne und der Dreck ja nicht automatisch von der Innenseite dann verschwinden. Sauber aussehen aber sich die ganze Zeit kratzen ist aber sicherlich auch ein Look ;D

  • @michellebyrom6551

    @michellebyrom6551

    Жыл бұрын

    The work side of the jacket needs to have a very smooth finish to allow dust and shavings to be brushed and shaken off easily.

  • @kayerin5749

    @kayerin5749

    Жыл бұрын

    Ich dachte auch, dass die Arbeitsseite "nicht anhaftend" sein sollte, mit anderen Worten, Sie könnten sie abbürsten, bevor Sie sie von innen nach außen wenden

  • @RoamingAdhocrat
    @RoamingAdhocrat Жыл бұрын

    this channel is a rollercoaster :(

  • @keithspencersr.6806
    @keithspencersr.6806 Жыл бұрын

    I was surprised that you and crew didn’t complete the outer structure, best wishes no more surprises.

  • @lootwijk
    @lootwijk Жыл бұрын

    My goodness, this episode is such a wild ride. The first half is nearly heartbreaking but I *have* to keep watching. And then it turns around and we go to Santa’s magical gosh darn super studio. I am, well, exhaustedly happy.

  • @jamespoyner3795
    @jamespoyner3795 Жыл бұрын

    Hi Laura, Here in Canada, we when building a house, any house after the sheeting is on the frame and the exterior wrap is put on, we make sure the absolute next thing is the finished roof to keep the elements out. Next, the interior insulation and a poly vapour barrier goes up on the walls and the ceiling. I would suggest you mix up some laundry bleach and water in a spray bottle and spray that on where mould is growing then allow it all to dry before buttoning it all up again the bleach will kill the the mould. Also there is an air circulation system on the market used in a lot of tiny houses, by Lunos. Good luck!

  • @ScissorsAndSmiles
    @ScissorsAndSmiles Жыл бұрын

    Ich muss hier mal sagen, dass du echt meinen Respekt hast, wie du mit den Setbacks umgehst. Die Wasserschäden hätten mich so frustriert, dass ich erstmal gar nichts mehr gemacht hätte. Du dagegen packst es sofort an. Admirable! Hoffe aber trotzdem für dich, dass es nach dem Trocknen dann ohne weitere Hindernisse weitergehen kann. Sehr cooles Jackenprojekt. Can’t wait for that!

  • @officer_baitlyn

    @officer_baitlyn

    Жыл бұрын

    Geld haben hilft, Zeit haben hilft, daraus content machen können hilft :^)

  • @LittleDergon
    @LittleDergon Жыл бұрын

    One of the best things about my favourite jacket is that the main pockets have zippers! This means I feel safe having my card holder, phone etc in my pocket when I'm in town and no one can easily pinch it. Also having a chest pocket or arm pocket large enough for a train ticket is very handy 👍 just some ideas to help your jacket be the best it can be

  • @claudiahoffmann4491
    @claudiahoffmann4491 Жыл бұрын

    Die Jacke wird sicher absolut fantastisch. so schön zu sehen, wieviel Kreativität, Zeit und Liebe dain verwobeb sein wird. Total cooles Gefängnisfenster!

  • @bd4166
    @bd4166 Жыл бұрын

    So excited for the jacket! Those looms are so interesting.

  • @ps-3435
    @ps-3435 Жыл бұрын

    There is also a structural problems that caused the floor to be so wet. The whole house is build on top of plywood that has plastic film on it and the wall is built in a way that the floor forms a lip to the outside of the wall and the moisture barrier also ends above the floor all this makes possibly for the water get in the insulation. It would be good to have a gap between plywood and insulation and outer membrane should continue below the floor in a way that there would be no lip.

  • @paulroth1060

    @paulroth1060

    Жыл бұрын

    important point!!! i think this will be a problem in the future. not only now, trying to dry the floor. what would you do? extra ventilation/ insulation layer underneath the already existing floor? there will naturally be water on the bottom of these structural plywood boards in the winter, with cold air rising up to the heated house…

  • @Meluforever

    @Meluforever

    Жыл бұрын

    It's not plastic film, it's a waterproof but breathable geotextile I think. But indeed, the walls should protrude from the floor (and ideally the wall insulation should not be in contact with the floor insulation too, I think). And also a vapour barrier is missing between the interior wall and the insulation, which will prevent the humidity due to breathing and cooking from accumulating in the insulation...

  • @paulroth1060

    @paulroth1060

    Жыл бұрын

    @@Meluforever two things: 1.) i agree with your assessment about the walls, but all things considering, and keeping in mind that its not actually a real long-term house we are talking about, i don't think that a vapor barrier is absolutely necessary. it actually makes the more sense to have mostly open system, if your outside layer allows vapor to go to the outside. i work a lot with the kind of insulation in the video, and you would be surprised how much %moisture is actually just fine (tested and approved by the manufacturer). there is just some salt in the wood fibre (hindering some degree of mold i think), which doesn't create fumes though, apart from that it is essentially pure wood fibre, (and sometimes something which is essentially PUR-glue, but mostly not even that). the insulation can hold humidity (almost without loosing its insulation qualities) and return return it to the environment. more so in the winter, when you have heating in the inside and around 0 degrees celsius or below 0 outside... but if its just soaking wet, we are talking about a different issue, of course 2.) the plywood just seems to have a regular plastic coating. in any case, the thing wich makes the plywood airtight/resistent towards vapor is the glue. the thing i'm not sure about though is, if it will even matter. as long as Laura manages to dry out the entire floor/inside to a point, where any new vapor only "wants" to go up anyways, everything should be okay. moisture on the outside layer of the plywood, eating at the glue layers will be long term problem though, if it stays like it is... but probably not in the short term. and this would only be a problem for winter/fall

  • @ps-3435

    @ps-3435

    Жыл бұрын

    @@Meluforever Plywood below the floor has a plastic film. the plywood on the walls do not have plastic film. Floor insulation should not touch the plywood with film there should be a gap and possibility for air to circulate. Even better solution would be if the floor structure had been constructed in a way that it could breathe to outside air.

  • @ps-3435

    @ps-3435

    Жыл бұрын

    @@paulroth1060 It think current structure could work as longs as there is not going to be any water that can get in to the floor insulation. but there is always the risk. I would rise the floor at least 20mm in way that insulation do not touch directly to the plywood and arrange ventilation between plywood and insulation.

  • @Lynnrazz
    @Lynnrazz Жыл бұрын

    Oh Laura... your positive attitude in the face of adversity is simply inspiring...!!! 💚

  • @kayerin5749
    @kayerin5749 Жыл бұрын

    I'm not going to lie, I put off looking at this video all day! Oh no, not ANOTHER disaster! And yet, to my credit, and far more to Laura's, I did watch, and learned, on an even deeper level, that if you want excellent results you must keep coming back and doing what has to be done, doing it as long as it takes, and NEVER. GIVING. UP. This is almost a strange ethos in our modern world where fast and cheap are common. It is people like Laura and her friends who remind us and are the beacons of quality workmanship. I'm excited for the jacket! I loved seeing other people as focused as Laura on quality and creating.

  • @helensarkisian7491
    @helensarkisian7491 Жыл бұрын

    As you slowly came to realize with the big house, when there is damage, it is best practice to gut the whole thing, fix the skeleton, seal the skin (roof and sides), then - and only then - you can have the fun of finishing the interior. I know, it’s a bitch, but tame the shrew to have a good life. As Jane of See Jane Drill - “seejanedrill”, says: You Can Do This! 🌺

  • @spamanator666
    @spamanator666 Жыл бұрын

    That outside "house wrap" is also not water proof, so that did not help things if it was super windy and raining at same time.

  • @eric_the_egggremlin
    @eric_the_egggremlin Жыл бұрын

    I don't know anything about carpentry, metalwork, building, etc, but by gd I am a Fiber Fiend and I GOTTA know more about Mr. Hays and the mill he works with. Also the fact that their machines are so old they use punch cards is so charming and delightful!! I'm glad you're getting a jacket you can feel good wearing! (I worry about things rubbing off on clothes underneath the jacket and staining the nice side when you turn it around again, but that's just me)

  • @ViktorSarge
    @ViktorSarge Жыл бұрын

    I'm thinking this experience is a decent argument for having everything with the big house double checked by professionals every step of the way. Also the big industrial dehumidifiers are awesome and can probably be rented. We had water damage in an apartment one and I wouldn't close anything up before running one of them for a week or two.

  • @f3600
    @f3600 Жыл бұрын

    You are learning right now... i know its painfull but that the way to go ! I'll be rooting for you along the way !

  • @Gandellion
    @Gandellion Жыл бұрын

    Okay, weatherproofing is the first thing that needs doing after the house is dry

  • @tullgutten

    @tullgutten

    Жыл бұрын

    Needs to be done before it is dry as will only get wet again and again uintill she learns that it needs to be waterproofed first 🤣

  • @TrevorHigginsDustysqueak
    @TrevorHigginsDustysqueak Жыл бұрын

    Those looms are so stunning! I would get a Laura jacket in a heartbeat.

  • @schallundrauch07
    @schallundrauch07 Жыл бұрын

    Moin. Was mir etwas Sorgen macht ist, daß ich nirgends eine Dampfsperre sehe. Hast Du Dir Gedanken um den Taupunkt gemacht? Wenn Du darin wohnst und die Luftfeuchtigkeit von innen an die Dämmung kommt und in dieser kondensiert wird Dir die Dämmung absaufen ...

  • @JAloja-um8nn
    @JAloja-um8nn Жыл бұрын

    So many comments trying to give advice on water damage and tiny houses... I just wanted to say: RESPECT! This must have been sooo frustrating. You seem even more frustrated than after every single setback with Liselotte... no wonder! It takes a lot to wipe that smile off Laura's face! My respect for pushing through and always seeing the bright side!

  • @fdbvjhldkg
    @fdbvjhldkg Жыл бұрын

    I am so happy to see you dealing with the water damage properly. So many people just let it dry out, but don't remove the water damaged materials. If it has been wet for 24 hours or more then mould has started growing, whether you can see it or not. Getting it dry as soon as possible is critical. Mould is the most toxic substance on the planet. My house was also damaged in a storm. After fighting an insurance company for five years the house had to be demolished it was so bad, and I have not worked since due to CIRS (mould illness). We need to educate as many people as possible. My Barrister told me that mould will be the asbestos of this century. !

  • @Ardna53
    @Ardna53 Жыл бұрын

    A dehumidifier is an amazing piece of equipment! It will pull moisture out of everything ! I live in Florida so we know about moisture! In the US you can rent them❤

  • @richardnault9493
    @richardnault9493 Жыл бұрын

    I can't tell you how much I admire your positive attitude Laura. If I had encountered this situation, I would have lit a match and said good bye to this tiny soggy mess, being that wet it probably would not have burned !!!! I hope that you will have positive results finishing this project.

  • @handyandy5929
    @handyandy5929 Жыл бұрын

    SO COOL you gave a shout out to hard working people making original things, much like yourself. As for the water issues, take it as a lesson and feel blessed it isn’t the house. This too shall pass.

  • @ekidenbuilds
    @ekidenbuilds Жыл бұрын

    This jacket idea is the most awesomest thing, and I will buy it the minute it comes out ❤❤

  • @wb8517
    @wb8517 Жыл бұрын

    The jacket project looks fun. Every part of it. Tiny house.... I was worried when you started finishing the inside before buttoning up the outside - and this is exactly why. I'm sure you will get it all ironed out, but super frustrating to have to rip out and redo things. Love your positive attitude.

  • @davebauerart
    @davebauerart Жыл бұрын

    Taking it apart and drying everything is the best choice, glad you were able to take those steps so the tiny house can be the best. Thanks for sharing Tyler Hays and M. Crow workshop that is wonderful to see someone so dedicated to quality materials.

  • @janetd4862
    @janetd4862 Жыл бұрын

    I love that you’re going to get a jacket made. His studio is awesome. I think I know how to do a lot of things, but he knows weaving, textiles, sewing, painting, pottery….wow. I feel like I know nothing in comparison.

  • @lutzherbst6885
    @lutzherbst6885 Жыл бұрын

    Oh mann, das war ja ein Schock zu Beginn des Videos. Aber ihr habt super reagiert, nicht lange aufregen sondern machen. Das fand ich super!

  • @fuchsfarben
    @fuchsfarben Жыл бұрын

    The problem I see with a reversible jacket is that all the sawdust and dirt you mentioned is just going to end up on the inside and the shirt you wear underneath. So you'd have to clean yourself up before reversing it, which goes against the quick-and-easy-method you want. I don't know if that is what you are looking for, if you don't mind that, forget I said anything :) I do hope you'll have pockets that can be accessed from both sides, would be cool to not have to rearrange stuff :D I'm surprised though that, at this point, you don't just have an extra jacket somewhere in your shop that is for switching up your work coat.

  • @RickMunday
    @RickMunday Жыл бұрын

    It's been said below, but worth reiterating - you dry up the outside of the house before you do any internal work. It's obvious to some, but not to others. And it's the reason why there are standards for construction. A $10 book will save you thousands of dollars in mistakes. Not singling you out, Laura. And this is the perfect thing to turn into a teaching moment.

  • @FlorianHorsch
    @FlorianHorsch Жыл бұрын

    The second half of the video made up big time for all the pain and empathy I felt for Laura in the first half. #dearsantaiwantoneofthesejackets

  • @tomanicodin
    @tomanicodin Жыл бұрын

    Surprisingly? Ofc he wants!!! You are the perfect inspiration for a work jacket!

  • @artheaded1
    @artheaded1 Жыл бұрын

    Condolences on having to rip up nearly the entire floor. Your trip to Philly & NY looks like it was just what you needed to balance things out. Very excited to see how your coat design develops, and to learn that an artist like Tyler Hays exists!! Next time you're in the Philly/NY part of the world, feel free to drop by and spend a night on my couch in New Jersey :)

  • @Liofa73
    @Liofa73 Жыл бұрын

    I think you need insulation under the truck too, maybe a spray foam. The large flow of cold air underneath the trailer will cause any moisture inside to accumulate in the porous insulation. With the fire heating such a small space, more moisture from your breath and cooking will be able to be stored in the hot air. When the room cools, it'll all precipitate out and leave you will a lot more damp. An electric heater that can be easily controlled would be better. You may also need some vents in the bottom of the trailer to stop the insulation getting wet.

  • @Meluforever

    @Meluforever

    Жыл бұрын

    She insulated under the truck, but maybe not enough. And certainly no spray foam, which is totally anti-ecological, an horror for the environment...

  • @danielegger6460

    @danielegger6460

    Жыл бұрын

    Indeed ventilation is the key here. You can't just air-proof the insulation and hope for the best, temperature and humidity differences will ensure that all moisture will be trapped inside the insulation (even without a leak). What you want to do is put a damp barrier between all insulation and the inside and have airflow around the insulation from the outside (which could double duty as a drainage in case you really have a leak somewhere). Since hot air goes up and cold air sinks to the bottom you usually don't have any massive temperature losses by making the floor insulation breathable, but yeah, putting a copper or stainless stell mesh or hole sheet in there is probably a good idea to keep rodents and wasps (or hornets) out, they do eat away insulation in no time and breed in there. It's also a common misconception that hot summer days are a good choice to build something like that; heat carries humidity a lot better than cold air so typical summer days in Europe are very damp (even a lot worse in large parts of Asia, though), so you're starting your build with damp material to begin with...

  • @DrTurtleBee
    @DrTurtleBee Жыл бұрын

    Roof first. Then dry in (outside/windows). Then interior. Glad it can be salvaged though and sorry you have to re-do stuff. Cool fabric factory too!

  • @AudreyII-
    @AudreyII- Жыл бұрын

    Condolences. Sounds like a total rebuild. It sucks but you have our support.

  • @justinguinyard4466
    @justinguinyard4466 Жыл бұрын

    I've learned so much watching your channel over the years so thanks for sharing. Can't wait for the jacket to finish development; another great idea!

  • @enriquegarciacota3914
    @enriquegarciacota3914 Жыл бұрын

    I really appreciate that you show what goes well and what goes wrong as well. What is the lesson here? Do the roof/outside before the interior next time?

  • @user-xn9ms1wy2c
    @user-xn9ms1wy2c Жыл бұрын

    Thank you Laura! I admire your tenacity!

  • @SergA7
    @SergA7 Жыл бұрын

    Sorry to be annoying but Laura, PLEASE, always wear safety glasses! Always! I'm speaking from experience, so I unfortunately know what I'm talking about... Other than that, thank you for your videos and keep it up! I can't wait to see the project finished! 💪

  • @donaldwindland
    @donaldwindland Жыл бұрын

    The benefits of spray foam insulation seem to becoming more apparent. More water tightness, and less wind penetration seems to be advantageous given your current situation. Also, addressing the water and air tightness from the outside, with the exterior sheeting products might have saved a bit of work and not needing a wrapper around the outside. Additionally, building inside an enclosed garage until the exterior is fully buttoned up seems to be good advice.

  • @DeerheartStudioArts
    @DeerheartStudioArts Жыл бұрын

    Can’t wait to see the finished jacket! Great colabs with highly creative peers. thanks, Laura!🦌💌❤️💪✌️

  • @theonetrueanthonylong1843
    @theonetrueanthonylong1843 Жыл бұрын

    I love the spotlight you did with Tyler Hays and your journey through the world of textiles and showing off the textile mill. That was SUPER COOL!!!

  • @lawrence5117
    @lawrence5117 Жыл бұрын

    Well it wasn't as bad as I had feared. I hope you get the problem sorted and look forward to further progress. Just try to take things a little slower and anticipate any future gremlins. Thanks

  • @ct5625
    @ct5625 Жыл бұрын

    I haven't watched it all and I might be stating the obvious, but have you confirmed it definitely is all from the roof and not wicking up from bottom? I see you have a wooden lip around the base of the outside, the water could be coming in through a wicking process from the outside and then being pulled up into the insulation. Water is attracted to dry. It doesn't matter if you have the walls covered in waterproofing, the wood under the walls will pull that water through into the inside. Maybe you have thought of this and maybe I'm just preaching to the teachers, but I just don't want you to do all of this again just to discover that it's the wood around the base of the outside walls pulling all that water inside.

  • @timspoor
    @timspoor Жыл бұрын

    Laura, respect to you and your team for dealing with the setbacks and overcoming them! Don't let the haters stop you. Love your videos and the way you work together with Felix and the others

  • @jonr6680
    @jonr6680 Жыл бұрын

    Can imagine your frustration, so sorry about this news. Hard decisions too but going backwards to ensure damage is stopped is the best one, short pain for long gain.

  • @christophburghardt115
    @christophburghardt115 Жыл бұрын

    You have to think about a drain for the floor anyway. If you spill water the moisture must have a chance to escape.

  • @refusedone
    @refusedone Жыл бұрын

    Everyone who thinks they know better & have a right to criticize from their phone while they sit on the couch…realize that this is about experimenting, learning, growing & having fun…Laura’s indomitable spirit & joyful nature is why I’m here…Thank you for sharing all the victories & setbacks with such joy & determination!

  • @Vincent-kl9jy

    @Vincent-kl9jy

    Жыл бұрын

    Constructive criticism isn't a bad thing.

  • @samanthajohnson3368
    @samanthajohnson3368 Жыл бұрын

    I love your energy and your positive attitude towards things even when thing go wrong. Its all a big learning curve and we learn from our mistakes and do better because of them. I'm excited to see what happens with the jacket and the journey of your tiny home. Great videos.

  • @crisrose9707
    @crisrose9707 Жыл бұрын

    The only thought I have design wise for your reversible jacked is a 2nd inner liner that keeps your under clothes clean and covers the work side of the jacket when you are wearing it inside out. Imagine you get oil or paint on your work jacket - No problem, its my work jacket - you turn it inside out to go and see friends, get home, take off your jacket and realise your shirt (that you wore a jacket to protect) is now covered with paint and oil... A thin 2nd layer of lining that you flip out before turning the jacket inside out would be awesome and could even be made of a waterproof material to make both jackets waterproof!

  • @pauljena9859
    @pauljena9859 Жыл бұрын

    It cracks me up when I see a new video from Laura. Here’s another example of trying to put out content to keep the money flowing. She’s got to quit putting the cart before the horse, follow proper building techniques instead of just doing stuff to make it look good. I’m a fan of her channel, at first I thought it was about building things but it turns out to be a comedy show. Thanks for the many laughs. Laura, next time, consult with someone who knows what their doing. Take this as a lesson and try to do better in the future. 😂😂😂

  • @LittleDergon
    @LittleDergon Жыл бұрын

    I hope that you have done good research into water insulation and good roofing to put into practice not only on little, but Lotte as well! ❤️

  • @dougidoug
    @dougidoug Жыл бұрын

    Your positivity is so amazing no matter what happens. Keep smiling

  • @IQzminus2
    @IQzminus2 Жыл бұрын

    I would suggest to buy / borrow / rent a dehumidifier and a moisture meter. The moisture meter both will be useful to be able to tell what is and isn’t dry, and give a certainly in that. And is quite a small and cheap tool. And also helpful like being able to tell if you have water damage / problem with moisture coming in and where, without tearing up the floor or drilling inspection holes. I would also suggest to consider adding a slight overhang to the design of the final roof. This doesn’t have much to do with the floor. But it should make a big difference in helping minimise the risk of future water damage. Good luck in the future with the build!

  • @GreyDevil
    @GreyDevil Жыл бұрын

    The jacket sounds like a really interesting project, though looking at the process i can imagine the end price for finalized jacket would be in the premium category. But secretly hoping its the kind of thing i can one day afford to buy :) Also i'm sorry you're dealing with water damage in the tiny home, in hindsight its easy to figure out what could've been done differently or better but at least what you're doing now is putting an honest effort to fix whats wrong. Though i definitely would've used one of those large room dehumidifier to speed up the drying and to avoid mold from happening.

  • @Ardna53

    @Ardna53

    Жыл бұрын

    A dehumidifier?

  • @GreyDevil

    @GreyDevil

    Жыл бұрын

    @@Ardna53 Fixed it :) it was early in the morning and did not question my choice on appliance

  • @Ardna53

    @Ardna53

    Жыл бұрын

    @@GreyDevil love your channel!!!!!

  • @tree_carcass_mangler
    @tree_carcass_mangler Жыл бұрын

    Wow, I hope you get all this sorted out...and get everything up to speed in a logical sequence (and that's all I'm going to say about that). Thanks for sharing this journey! Thumbs up.

  • @Erpty05
    @Erpty05 Жыл бұрын

    Everything you do and everyone you meet along the way is relentlessly inspiring!!

  • @beverlyw56
    @beverlyw56 Жыл бұрын

    You are so positive and confident in such a travisty. Wishing you the best. I enjoy your videos.

  • @SparkHomeschool
    @SparkHomeschool Жыл бұрын

    Makers coming together to make something new together is one of my very favorite things. I’m so sorry about the water troubles 😞 Wishing you no more delays from here on out! Thank you for the video ❤

  • @jonathancook4022
    @jonathancook4022 Жыл бұрын

    I hope you learn from this experience. As someone who lives in the Lake District (cumbria, UK) and has worked in the highlands of Scotland, both really wet and humid places, I have found it essential to finish the exterior of a building and then (if possible) wait for a rainstorm to ensure the building is indeed waterproof first before installing the interior. In your rush and persuit of a place to live you have only added more stress, cost and delays when this could have all been avoided with a bit of patience and some planning. I hope you don't make the same mistake with the big house renovation.

  • @joansmith3492
    @joansmith3492 Жыл бұрын

    Talk about learning the hard way!!!

  • @linw7320
    @linw7320 Жыл бұрын

    A fun & exciting collaboration, Good timing. Congrats 👏

  • @whazee
    @whazee Жыл бұрын

    😬🤞 I really hope that's the last of your problems on the tiny house! ❤

  • @pablomax9376
    @pablomax9376 Жыл бұрын

    Sorry to hear about the damage. It looks that you learned an important lesson though. Ensure a water tight and sealed exterior before messing around with the inside. Especially with wood construction!

  • @samanthageiger5851
    @samanthageiger5851 Жыл бұрын

    What an awesome people, Tyler, Pat and Laura! Seems to me the spirit of making or building is in the discovery of what we like, what works, what’s interesting. Sometimes it’s discovering things went wonky and keeping going. Glorious that we have the capacity to learn some of the steps in that process that we’d usually not have access too. Unless they’d like me to get them some coffee! Gratitude for sharing it. ♥️ Cheers

  • @stevenoltay
    @stevenoltay Жыл бұрын

    The best part of all this is your attitude about it.. it’s not the end of the world, obviously costly time wise and replacing the insulation can’t be cheap but immediately cracking on without hesitation is lovely to see.

  • @SimonSaysJohnsen
    @SimonSaysJohnsen Жыл бұрын

    Your spirit is the key element - not water - for these projects. You guys are awesome!

  • @lcapplewood
    @lcapplewood Жыл бұрын

    I love the jacket idea! I can't wait to see! I work for outside a lot so it would be handy.

  • @Julia-zj2ch
    @Julia-zj2ch Жыл бұрын

    Oh Laura. The water damage is very painful. You will make it right, you always do. Your jacket will be awesome! As a hand weaver myself it was lots of fun to see those old looms in the mill.

  • @drhender6943
    @drhender6943 Жыл бұрын

    The vest that Tyler is wearing is just soooo cool!

  • @CesareTomasini
    @CesareTomasini Жыл бұрын

    Protect the lower inspection holes with a iron mesh, to avoid mouses and other small animals to make nest into your floor

  • @geoffersmaher
    @geoffersmaher Жыл бұрын

    Don't listen to the keyboard builders on here. Everyone makes mistakes and I'm sure half of them haven't even built a structure like this. Keep on inspiring and keep up the great work

  • @egbluesuede1220
    @egbluesuede1220 Жыл бұрын

    Inspiring how you handled this setback. I look forward to updates like a favorite TV show you get hooked on! And now I'm equally excited to see how the clothing collab works out too!

  • @lms4778
    @lms4778 Жыл бұрын

    Fascinatingly episode! Problem solving, without being crushed. And enjoyable window into textiles; thank you very much!!

  • @mariroseblumbump6106
    @mariroseblumbump6106 Жыл бұрын

    I also suffer from wanting to just keep going and getting it done. This is one of the possible consequences ….. These few corrective comments are appropriate….