It’s all in the Name….

West Coast River Outlaws takes on another project with just enough time to have it ready for the first annual Hot Boat River Party with Crawdad’s on the River. This 18’ Outlaw isn’t just packing any typical Oldsmobile… Make sure to subscribe to stay updated!

Пікірлер: 35

  • @ronschwolsky1626
    @ronschwolsky1626 Жыл бұрын

    Your girl needs to put down her phone and enjoy the ride!

  • @crushednutts8934
    @crushednutts8934 Жыл бұрын

    Always wanted a boat like this when I lived in central Ca. Now live in Wisconsin on a five mile long lake and still want one just to shake this place up. Like most mornings here the water is like a mirror. Go Fast!

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    Grab one and rip that water! There’s gotta be one in the area for sale by you

  • @boatlover2296
    @boatlover2296 Жыл бұрын

    I see you brought your personal floatation devices😂😂

  • @FastLoudPhotography
    @FastLoudPhotography Жыл бұрын

    Dude. I don't even own a boat, but I love your videos!

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    Thanks dude! You’ve been a huge role model in this!

  • @dougbrooks7681
    @dougbrooks7681 Жыл бұрын

    Been there ,done the had a 1979 Eliminator 19 ft Sprint 468 big block 80 mph all day long 👍

  • @tommywaters2654
    @tommywaters265411 ай бұрын

    Very nice ride for a boat

  • @njwlandscape
    @njwlandscape11 ай бұрын

    Nice to see an olds runner. Mine made good power but always milkshaked the oil. Even with a pressure regulator.

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    10 ай бұрын

    This one actually was starting to do the same and we have a pressure regulator as well. There’s a small valve on the back of the intake on this boat that manages the water flow going to the headers. This is in addition to the Bassett tee valve. We cut a slight amount of water back from going into the headers and it solved the problem

  • @salmartinez9214
    @salmartinez9214 Жыл бұрын

    Awesome videos

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    Thank you sir!

  • @hoopaholicstickum
    @hoopaholicstickumАй бұрын

    DUDE!!!!! You need to take advantage, and show more of your partner in your videos…. Jus sayin’… 😎

  • @videocruzer
    @videocruzer11 ай бұрын

    The install sheet that I got when i had to do work on my boat told me to use the bowl sealer around the bowl before you seat the transom plate to the haul, and seal the transom seal bead at the same time. pro jet boat guy told me the same thing as the install instructions as well.

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    10 ай бұрын

    There’s several ways to go about installing a transom cover. The kit will usually come with a base gasket and a big o-ring that goes around the bowl. A simple bead of silicone does a great job and doesn’t make removing the cover later difficult.

  • @pollycat1294
    @pollycat1294 Жыл бұрын

    got a 74 sleekcraft named murphys law. 383 sbc 450 hp runes good!

  • @walkingman9171
    @walkingman917112 күн бұрын

    I don't know why you need silicon, A new Oring and Gasket works fine for me and how the factory did it.

  • @LivingOnCash
    @LivingOnCash10 ай бұрын

    Man, I'd have a hard time putting that nasty transom cover back on like that. Ideally, would have had it bead blasted and powder coated or painted but you probably didn't have time or customer didn't want to wait. I think I'd at least scuffed it up and rattled canned it white. Nice boat though.

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    7 ай бұрын

    That's exactly why we didn't worry about the look of the cover. Earlier this year we pulled everything back apart and had the pump powder coated.

  • @frankeckert4901
    @frankeckert4901 Жыл бұрын

    Uhhhh Tiffany...............Olds What?

  • @BackyardBeeKeepingNuevo
    @BackyardBeeKeepingNuevo11 ай бұрын

    Getting the silicone out was the worst part of working on our jet boats.

  • @jklivin2007
    @jklivin2007 Жыл бұрын

    …..what happened to the BLUE transom cover?

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    The old transom cover hung below the bottom of the boat. Noticed it when we pulled her off. So we put the white one on. Fits like it should now. If your transom cover is hanging below the boat, it’s a lip that can catch water and cause a bad day on the water. Ask me how I know hahahah.

  • @mikeludwig7286
    @mikeludwig7286 Жыл бұрын

    That silicone only last about 3 years?🍀

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    If it’s done right from the start and the boat is put away dry and covered, it may even last longer than that! Lol

  • @98sohc281
    @98sohc281 Жыл бұрын

    Why did you change the transom cover from blue to white? Can you not drill out the original blue cover? Also how did you mount the manual diverter handle? Just curious. Dope tech video. Beautiful boat also. Keep up the great content.

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    Thank you for the compliments! The old transom cover hung down below the bottom of the boat and we weren’t comfortable with that. So we put a new cover on and drilled it out. Better fitment. The diverter handle simply screws down into the subfloor with stainless screws. Some boats don’t have a subfloor, so in that case you would want to use a stringer mounted diverter handle.

  • @richarddunn6292
    @richarddunn6292 Жыл бұрын

    There's a better theme song .for y'all.called outlaw from the band the scream .album let it scream

  • @doccyclopz
    @doccyclopz Жыл бұрын

    What's the Hull make/model ?

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    18ft Outlaw Jet

  • @leonp8746

    @leonp8746

    Жыл бұрын

    How you post an outlaw without posting mine.. SMH lol Gorgeous boat

  • @westcoastriveroutlaws

    @westcoastriveroutlaws

    Жыл бұрын

    @@leonp8746 we’ve got the crawdads event video being made up right now don’t you worry haha 🤘🤘

  • @doccyclopz

    @doccyclopz

    Жыл бұрын

    What years the hull? Are they still being made?

  • @mattbrown9484

    @mattbrown9484

    10 ай бұрын

    We’re those Sunkist at one time? My dad had a Sunkist back in ‘79 or so exactly like that except 460 ford and different color scheme. Loved that thing.​@@westcoastriveroutlaws

  • @mccashmallett7443
    @mccashmallett7443 Жыл бұрын

    like