Sure, this is correct solution! ))) You only can have easeer assembly, at last step, if you use ring with longest brass rods(put it in side rings holes), but generally - you solved this puzzle correct. Thanks for this video, I enjoyed it very much! I Like your engineering way in solving.

@Mr.Puzzle

11 ай бұрын

In my opinion one of the best puzzles you created yet. Very creative! 😊👍

@vincentbanksjr.7509

11 ай бұрын

I agree great puzzle and great solve

@davidorourke3630

11 ай бұрын

That is a very clever puzzle👏👏👏

@currentlypooping

11 ай бұрын

That's a very cool packing puzzle, quite different than any others that I have seen :D

@timjagoe9378

11 ай бұрын

Generally?

There was a hint in de directions by stating nothing would fall off when shaken, was implying there should be parts not around the shaft in the solution. Also the name Cluster was suggesting there would be groups of items together. But all in all, a very challenging puzzle and well made!

The twist at the end of your solution was one of the first ideas I had, and I knew you were onto it as soon as I saw you link the two pieces together like that. But I really liked how there was more to it than just that one gimmick as it gives more options to think of and try out. Really neat puzzle!

That GENUINE enthusiasm and utter JOY in tehr 'ahah' moment and following solve was infectious! What a wonderful puzzle!

Clever! It's so nice to see a puzzle that's not just a test of patience or dexterity, but a genuine enigma. A vital part of this one's appeal is that the nature of the solution is itself puzzling. That's a rare thing. Bravo!

That one is MADNESS and I love it. I'm always a fan of any puzzles where the scratch paper comes out. Brings back fond memories of those old "hidden maze" puzzles with the graph paper lol

Finally after all the years of watching I spotted the solution before Mr Puzzle.. As soon as it came apart I figured the solution had to be in the pins and holes otherwise there was no need for them to be there and then I saw it.. I must have looked like an idiot screaming at the laptop screen hang them out on the pins.. I don't ever expect to do this again so you can put on my tombstone "Just once he beat Mr Puzzle to the finish line, he can now rest in peace" ..

@EngineerBrunS

11 ай бұрын

))))

@Mr.Puzzle

11 ай бұрын

🤣 Would have loved to see you watching the video!

I had it figured out as soon as it was taken apart to be honest its super easy to see the trick it's made to make you look at it in the wrong way and not see what's right in front of you.

The puzzle relies on expectations. The puzzler thinks the main shaft must go through the holes, as they fit together. And so, due to expectations, the puzzler does not see that there is no requirement to meet expectations. Brilliant!

This solution made me smile. I love it.

Never seen him so excited to solve a puzzle ☺

very unusual, having them stick out was actually my first thought when watching this. when opening up the caps though, i wondered if i was wrong, but the measurements seemed to give no other option

I have no idea how long it would've taken me to realize the solution. Great puzzle!

I solved this in under 4 seconds. As soon as I noticed the three holes on each ring I knew this is how to put it together.

I’m quite partial to an odd puzzle but this one would have my hair turning grey 😂😂

This reminds me of why a lot of puzzles have a list of rules you generally can’t do. It’s nice when you can intentionally break those ones from time to time.

@ObsessiveGeek

9 ай бұрын

No rules were broken

@pepperonipizza8200

9 ай бұрын

@@ObsessiveGeek That's the point

@ObsessiveGeek

9 ай бұрын

@@pepperonipizza8200 So it’s a bad thing that this has a very specific rule?

I dont know why but I thought of the solution as soon as he started opening the puzzle. Usually the puzzles look hard, but this one seamed easy for me.

loved the solution to this one and it's very nice looking, too!

I already love this puzzle

l think l would take note of each piece as l disassembled it, choosing an A, B or C side, documenting each attribute, either raised, indented or hollow and marking the position w an A, B or C. still, an unusually made packing puzzle as it's more 3D than a flat frame.

Thinking outside of the box. Reminds me of taskmaster. Haha

I love the shiny metal machined ones like this. Very pretty.

This was brilliant😂

Not thinking outside the box, but outside the cilinder 😜👍👍 thanks again

@Mr.Puzzle

11 ай бұрын

🤣👍

I suspected that was the solution when I saw those pins sticking out. 😊

It is the first time I knew the solution before Mr.Puzzle. :)

@Mr.Puzzle

11 ай бұрын

Well done! 👍

This is why we need to bring "creative thinking" back into the schools or even into our everyday lives. Most people only think on the surface and are cognitively limited when it comes to problem solving. It's like linear thinking vs. multi-dimensional thinking.

Beautiful looking puzzle...Thanks for the upload!

Not trying to brag, that's where my brain went straight away. I never thought about the other things.

I knew I smelled a math story problem, ( or whatever they're called nowadays) lurking in the intro! I cant wait to see the solution!

Other solutions include Duct-taping the rings to the side and a Hydraulic Press. :P

Dear Mr. Puzzle, I've been a long time fan and still love your work! Being from Chicago I have to say "You gotta upgrade to Inch man"!! This "Bit-ta-batá-boo" millimeter is slowing ya down! LOL great job man!

Seems like a puzzle for expert puzzlers/engineers to me. I loved that Mr Puzzle enjoyed it, but it's probably not for the rest of us!

@grgapitic5768

11 ай бұрын

I saw solution immediately when I saw pins. I'm the worst puzzler and I don't like or do puzzles. Probably valid.

OUTSTANDING!

Such a unique puzzle! It's refreshing to see new ideas implemented in cool ways

Well done. Honestly I thought the center shaft would come apart so it could be extended and all the rings would fit within the line of the new length.

@thomaslyon2112

10 ай бұрын

Yep I had the same idea

Love this one!

Hope we make it to 1 million

That is right i watch a nother guy do the puzzle just like you did an he sent a picture to the maker and he said that is right. That is the right way.

Great puzzle, side thinking to solve it; that is what i like most, puzzles that makes me think ... i was too nervious most of the time of the video because i was seeing that (multiple parts at same level, so must be out and not centered) ... till i saw you finding that solution. Great video and great to see you trying to real solve it in live video (other videos of other youtubers looks too false since they try the puzzle out of camera prior to record the video); it is a honor to see you really trying by first time the puzzles. 😊 ❤

@Mr.Puzzle

11 ай бұрын

Thanks for your feedback and noticing this. It can be hard to solve sole puzzles in one sitting when you try it for the first time. You never know in the beginning where you finally end up. ⌚😊

That's cool, I saw that mistake and had the same thought at that very moment. Hehe

Superb!

Nice machining.

....need to think outside the cylinder (sneaky)

Very good!

Awesome puzzle.

BRAVO!

I expected it exactly like that as soon as you took it apart Those pins are so obvious

Wow! I don't think I would have ever got that.

I had the right idea pretty much instantly... 😃

I knew it !! First thing i thought when seeing the parts x)

Fun!

You make the impossible possible- amazing outside the box thinking. Fantastic puzzle and solving by the way.

@Mr.Puzzle

11 ай бұрын

Thanks! 😁

I can understand you wanting to contact the constructor. Because, I don't think you can shrink that diameter (and make it thin like the photo). The photo on the right is just to make it seem impossible. That's why the rules say "all parts must fit below the line," or something. So, I can understand you calling, because I imagine it's going to be the same width (diameter) but short and stout . On to the video now . Good job, Mr Puzzle and puzzle Constructor(s) . 😂 OH, @1:22

@Mr.Puzzle

11 ай бұрын

😁👍

Makes sense why in the instructions it said parts can’t fall off when turning or shaking the puzzle

I got this one in the first few seconds, the pins were the clue (I’m not a frequent puzzler so maybe just good luck)

Wow

Cool

Hey! Someone else who still prefers real vernier calipers! No dial, no batteries!

@Mr.Puzzle

11 ай бұрын

👌

The pieces must not move.

Beautiful puzzle. Too bad these are usually waaaay out of my price bracket for entertainment :D

Again an wonderful puzzle of mr puzzle you mind and you have a succes ideas.Well done🎉🎉🎉 i hope to to have 100 million subscribers some day .

@Mr.Puzzle

11 ай бұрын

1 million would be also OK 😇

Another wonderful long-form puzzle vid! Great stuff, Mr. P, and I hope you and yours are well! -D (12th Like!) EDIT Upon a 3rd viewing, this elegant puzzle was shockingly difficult! This is one of my favorite videos by Mr. Puzzle, hands down. Whoa!

@Mr.Puzzle

11 ай бұрын

Thanks, yes all good! Hope the same on your side!

@michaelgillespie1206

11 ай бұрын

I sure wasn't seeing the solution.

SOLUTION... Take the 2 ends off and open each end so that you have 4 parts with threads like a nut. thread on the threaded cap (nut) first on one side followed by the threaded ring (nut), tighten with pin rings. repeat on other side. untighten the center bolt witch is actually 2 bolts and a threaded spacer! extend center bolts with spacer. put back together... "VOILA" easy peasy. I solved this in 5 seconds or less just by watching a freezed frame. Everyone just has to see outside the box. Slow your thinking down. It also helps to dumb things down sometimes...

Use the hole from both sides... 😳

I knew it!

Cool video. The very first thing i thought when I saw the holes in the discs was a solution like this, with protruding pieces. I mean really, there couldn't be any other way to fit them, and those holes gave some hint 😊. But i don't know, is this the correct solution?

I have a feeling that piece extends.... I was wrong. :)

@Eidolon1andOnly

11 ай бұрын

The central shaft?

@groowanderer

11 ай бұрын

Good guess, though bud

@definitelynotanAIchatbot

11 ай бұрын

​@@groowandererDon't patronize him.

So, I'm not going to watch the solution or read the comments. I just need a clue. I've figured that there is space in both end caps to fit a ring in each one and still screw together. But after that I still can't get all the rest of the pieces below the line. It seems impossible!

@Mr.Puzzle

11 ай бұрын

Clue: Why to waste brass on this puzzle?

The most obvious puzzle I've seen for ages.!

40 Minuten für eine Lösung gebraucht, die ich direkt am Anfang gesehen habe. Bitter

Great solve! Is there any way I could get a list of your music titles from past and present? Such nice, easy listening sounds, wouldn't mind listening to them while I am at work.

@Mr.Puzzle

11 ай бұрын

I don't have it but will check on epidemicsound if I can print my playlist

Just spin it

Nope. As an engineer myself as you are Mr Puzzle, I hate that solution. Thinking outside the box at the highest level though. I think if feels like it breaks the rules.

@Mr.Puzzle

11 ай бұрын

Hehe, yes. It's like "on the edge" of the rules! 😁

@JayGee6996

11 ай бұрын

As an engineer you need to understand the rules of engagement with puzzles, the solution is usually in the grey zone where we don’t like to operate 😜

Not to brag, but I saw the solution early in the video. OK, I'm bragging. ;-)

@Mr.Puzzle

11 ай бұрын

Well done! 👍

I knew as I began watching that this would be as much a RIDDLE as it is a puzzle, and I was right! I got frustrated with your repeated use of the word 'impossible', as I knew the maker would not send you something that had no possible solution. But I also knew your outside-the-box thinking would kick in & get you there.

@Mr.Puzzle

11 ай бұрын

First time solves can be hard! Just talking and no scripting. Considering it being impossible is just an impression of getting frustrated. 😅

I wouldn't pay $220 dollars for that puzzle.

That's hot!

Whoah, nice. That was genuinely clever. That was cool

Arrrg…site won’t load

Honestly does not feel a right solution (even if saw in the comments the creator itself confirmed it is...) in the instruction it says all pieces should be in a fixed state and not move. So to me it imply that for the "protruding" rings, where you have only 1 pin engaged they could still rotate... So at least there should be a solution with at least 2 pins engaged per parts to really say they are fixed... Also... you have now 1 row of protruding rings. You could easily have more lines of protruding rings (at least two will surely fit), so you do not need to disassemble the top and bottom piece anymore...

Meh

It's "From Ukraine". You wouldn't say "from the Canada" or "from the Germany", would you? Slava Ukraini. Slava Heroyam. \|/

Its not a pleasant solution. It has gaps. Its not correct.

It's not "The Ukraine". It's just Ukraine. You don't say we're visit the England or the India or the Russia. You also don't say "The Ukraine". It's only "Ukraine". It's from Ukraine.

Wrong solution

@syjwg

11 ай бұрын

I had this sort of a solution in mind when I saw all of the pieces. Don't know if it's wrong.

There's a high pitching sound in the music. Please avoid this the next time. It's annoying

Why do you repeat yourself?

Cool