Not MPPT! I was wondering how it was so cheap on Amazon. Thanks for telling us. Greetings from sunny Jamaica.

What is the hole to the left of inputs? Another output for 9v?

Mine is stuck in night mode, its a LITTLE cloudy but it should be charging. What to do?

How do you change the float charge and max bulk charge setting for this controller?

Very good PWM, very good for the price, you have all The adjustmants you need, i have now a very good real MPPT, but that One was very good.

hello i want to ask why is this mppt when the weather is night the mppt reads on the screen it is working what is the cause please tell me

The battery has a smiley face, I'm sold...😄

Sir, why my mppt solar charge controller they have sign like a moon under the arrow from the pv sign.

Mine keeps shutting down. I connect inverter straight to battery and it's holding the charge for few minutes, but won't do it through charge controller. I tested the output amp it's like 5amps, so 10amp output controller should be able to handle 5amp. I'm trying to run slow cooker at low power and the controller shuts down. And my load auto is always off not sure why?

I lost the manual for mine, thanks so much for that :)

What PV OFF means in the beginning of this video?

can i put on the load my computer that has 600 watts powersupply and the battery im using is 100AH 12volts gel type?

Eu comprei um não esta reconhecendo 12 vts o que eu faço

hello I saw your video and I wondered having purchased the same solar charging regulator could you tell me what diameter you used in connecting the wires between the battery and the regulator I would be grateful .Ps you put the fuses between the battery and the regulator ? bye bye

Please explain how to turn on pulse settings

Mine it has moon error,I have been struggling for two weeks.how to fix this.

Can you use to charge a lifep04 battery?

Good day sir,,,,i have a question about the solar controller like this,i would like to know if it can be used with gel type battery,and where it is set to b1,b2,b3 pls reply god blesss

I had one of these for over a year. Works great when battery type is set right. It finally crapped out. So I bought another to hold me over until i get an actual real mppt. This new replacement sucks. Will not give me more than 2 amps from the panels. Normally id be at 11amps. And does not charge my batteries fully. So these are a hit or miss. First one was awesome...second junk. Just the push i need to upgrade.

What is the timer ⏲️ on screen

Can u charge l12v ithium ion batts with it?

I got similar, open it up, and most of the transistors did not touch the back steel plate for cooling. Added some thermal paste and bended the transistors for the good contact. Removed the rattling metal piece inside, that got my attention at the first place.

@kylechesterlerado1397

2 жыл бұрын

How's your item now? Do you think it'll last longer because of the adjustments you did?

Can I Hook this up to a " LITHIUM PHOSPHATE BATTERY " . Thank You for your Help

Nice review thank you

What is maximum input voltage from panel?

I use the load side and it work quite nice and it have a low voltage protection embedded in so quite nice for the price

Can it handle Solar Modules with 40V ?

Mine is NOT SHOWING THE INPUT AMPS OF MY SOLAR PANEL . MINE IS 250 WATTS PANEL . " THERE IS NO INPUT AMPS FROM MY SOLAR PANEL ".. CAN YOU PLEASE HELP ME . Thank You 🙏

Great job!!

Did you try the port that it is telling you that the part where the solar is is also the solar input as wind input to is trying to let you know that that both of them are the input is the is the solar and the wind generator

Hi, thanks for video!. I've got a similar unit. 50A. How do you set it so it continues to charge from the solar panel when it get to the 12.4 mark (under load)? Mine is allowing my batteries(2) to run past the 12.1v mark. i have recharged them now several times past 12.4 v ( 50%). This instructions don't give any info.As well, what is the setting to allow the proper incoming wattage from the solar panel? I have two batteries hooked together. (pos to pos, neg to neg). batteries are: 12V 100Ah AGM Sealed Lead Acid - UB121000. Solar panels are two 160w Newpowa panels.

@temp911Luke

2 жыл бұрын

12.10V is 50% not 12.4V

How many watts can this handle I have 1 25watt panel and I'm looking into getting more of them just want to know how many more I can use I have room for probably about 20-30 of these 25watt panels and I won't be buying them all at one time cost is a big thing but it's been a 2 year project so far building this camper

Question from South Africa: We have an old 6 x 12 V North Star 172 Ah battery system ( 1032 Ah) driven by 8 x 120 W solar panels (960 W) via a 20 A charge controller that was recently replaced by a 100 Ah charge controller as depicted above. 220 V power is generated through one 1000 W MSW inverter and interchangeable (by swopping the plugs) with two 800 modified sine-wave inverters depending on the load requirements. Recently the circuit breaker between the solar panels and the charge controller has tripped continuously when the five partitioned indicator shows full charge filling all five blocks. Can anyone advise how to rectify this problem please? Have been told it could be a short on the panels, the system being too old (20 years operating till now) to the charge controller being the wrong application.

@noahriding5780

9 ай бұрын

If you have 8 100 watt solar panels you have to separate them into smaller strings of panels. Meaning put only a certain amount of panels on one wire. Then put the others on another wire. The reason for this is that 10 guage wire is only sized for 30 amps of power. (As an indicator, do you see heat damage on your wire? ) Well... if you do the math you are probably double the allotted amps on your 10 guage wire. 10 guage wire is standard for solar power. So that means your wire is getting really hot and sending concentrated power into your circuit breakers. That's probably what is tripping them. 10 guage wire is basically only about 4 panels. 4 panels is bouncing around 6 amps to 8 amps of power PER EACH solar panel. And that calculation is based on a 100 watt panel. You said yours are 120 watt panels, which means add about 20%... you are probably way over the limit. And what can happen is that if you have too much power going through the wire, it will go up and try to fry/burn the solar charge controller, or it will trip the circuit breaker. You may have to have 2 strings of wires from the panels. And that might cause you to need a second charge controller also because most charge controllers only have 1 slot for wires incoming. OR you could upgrade the wire guage to something that can handle higher amps. Your 20 amp charge controller... there was no way it would have been able to do 8 solar panels. Think Ohms law... 120 watts in 12 volts that's 10 amps... or 100 watts with 12 volts is 8 amps... 8 x 4 =32... that's even kind of pushing it with 4 panels per set of wires. You could look up how many amps a THICKER guage of wire can hold. Supposedly 6 guage wire can be between 40 and 55 amps that it can carry. But I don't know if all makers won't cheat on wire strength and quality, etc.

I really didn’t get what I needed from this sadly

I have used this for many years.. I have to replace them once a year. They stop working. I notice that the backplate can get very hot. Now I bought a 100 amp rated . The Moffet shorted I had a 20 amp load. Causing extreme heat on the positive cable connected from the solar panel to the controller wire started to burn. Even if you buy a 100 amp controller mine failed at a 20amp current draw. I have switched to a more expensive one with bigger heat sink

@ronaldd.1355

7 ай бұрын

May I know what was the 20amp load??? I had a cheap 12v solar charger (the common blue and black charger) stated to be 60amp and I plugged a water pump 15amp (180w) to the load and it burned with plenty of smoke, it only ran for 3 to 4 seconds. Dunno why.

@paulzden6870

7 ай бұрын

Hi is there a setting for acid or gell batteries on there ?

Is it good?

I have one. It does the pwm function alright but as a charger is not good for lead acid batteries. No multiphase charging (another lie) just charges at a fixed voltage.

Hey RRM, you showed me more about that controller than any of the 50 or so videos I've watched. Thanks for your time! Just wondering, since I've never really looked into it, but... Have you ever thought about hooking anything up to your load? Liked and subbed!👍

Where is the amps?

EGADS! I see you touch the buttons and the whole board and buttons moves. definitely some quality control issues. I bought a considerably more expensive Renogy Wanderer. It is an MPPT, I have verified it mathematically with my oscilloscope input and output against the bluetooth app.

I installed two in my battery Bank for my two 450 watt panels, they run my 5000 BTu AC in my camper...

That is funny! just as I searched MPPT controller on Amazon this thing shows up in drowes... And cheap, but not as cheap as the cheap PWM controllers. So glad I found this! I have a couple of smallish panels with (the chinese cheap and even cheaper PWM controllers) and they do a nice job charging.. but thought I had a look at a MPPT controller that I maybe could use for future projects, maybe with older panels and stuff... and this is awesome! I thought as much, it's not an MPPT controller! Really thanks! It's just another "skin" on there standard PWM stuff... (which works though)...

What controler im need for x2 panel 310 w how many amper controler im need :)

@pinoytechniko6925

2 жыл бұрын

Go for a 20 or 40 ampere Mppt . Connect the panels in series in a 12 volts system. If you go 24 volts system you may parallel or series your panels.

I think am lucky because my is working properly

How much is the input voltage from panels .. 24 or 36 v ? Cs i have my panels in 36 will they work with that to accu 12volt

@realreviewsmedia2801

3 жыл бұрын

That's a question that i really don't know how to answer. My system is 12V but this works with 24V as well.

@danahorton1202

3 жыл бұрын

they are 12/24 volt only

@ericvl7430

3 жыл бұрын

This charge controller can take 36 volts max from panels. Meaning 4 Solar panels in parallel. Mine is working good its exactly the same. But 100 Amp and 24 volt battery system.

@emiel1976ep

3 жыл бұрын

@@ericvl7430 so you can put in 24v and charge a 12v battery with it?

@ericvl7430

3 жыл бұрын

@@emiel1976ep yes , connect 12 volt battery first a then your PV aray with max 36 volt.

thinking of using it to run a psu with it 🤔🤔

I would never spend a cent for a product with false labeling.

@MikePowlas

2 жыл бұрын

Then you can buy this one because that's not false labeling.

How many watts solar panel system do you have? thnx

how do you know which is or is not a MPPT controller.. Beginners are easily duped. What do you suggest.

@doverun

Жыл бұрын

Exactly what I wanted him to mention, but I think MPPT have dC to DC conversation so it will have an inductor in it and not only transistors.

the one i have i gave up on it crazy thane going to get me a midnite Kid or get a MPPT Touch screen

Misleading heading. How to programme it. Ask me to teach you

can this charge lithuim batteries?

@Myname-gn4kw

2 жыл бұрын

same question, but some told me can if bms present, but never tried

Price?

I bought one of these and it is Garbage. I can't even set the thing to the cutoff voltage. I have other simple controllers that work the same way but this thing seems fixated on charging a single battery to 24V. I recommend people avoid this style unit.

@nightlightabcd

3 жыл бұрын

All portable solar controllers are made in China and I recommend that people don't buy any of them! They are all defective! I have ordered 2 blue and 1 of the orange ones and all were defective!

@southkerr6267

2 жыл бұрын

@@nightlightabcd same here the orange is doing something I think. But the piece of dog shit is that 19a Harbor Frieght nonsense

@MikePowlas

2 жыл бұрын

@@nightlightabcd All are defected that is so not true.

@panabanana3973

2 жыл бұрын

They're fantastic as back up Or tiny stationary set ups

@msach4277

Ай бұрын

No problem with mine after 4 years.. it is outside sheilded and controls battery to my electric fenc e

Battery low or full ..how can I understand?

@JustScottPaid

4 ай бұрын

When you push the left button (menu) it will show you the level of charge (percentage ) you have left on your battery.

@user-lf8bj4di7f

4 ай бұрын

My device show only level not percentage..what can i understand full or low level​@StandYourGroundUSA

Can i connect my inverteren to the load

@nightlightabcd

3 жыл бұрын

Your converter is the load!

@jenbrazell7301

2 жыл бұрын

My solar pannel said hook battery up to the controller then hook inverter to the battery.the other side i dont know to use it for

@crpth1

2 жыл бұрын

NEVER connect high loads to the "load"! That "load" port is made for small loads, like LED's, or relay(s)... All controlled by the internal timer or the manual On/Off function. Use it properly. Keep in mind that inverters and any other higher loads, should ALWAYS be connected directly to the battery! Cheers

I bought the 100A model because the price was just too good. When I purchased it I knew that it was not a true MPTT and had head it was a good PWM. Unfortunately, the instructions are lacking. The instructions don't even mention what b01, b02, or b03 are even though it is an important setting. (B01 = Gel; B02 = AGM.; B03 =lead acid flooded) I set it up for 12V, flooded lead acid. The controller charged the battery at 14.7 V, which would apparently be the correct charge voltage. However, soon my batter started to boil over because the controller kept charging it at 14.7. So, I had to adjust the float voltage down to 12.6 to stop the battery from boiling over. So, I have to wait and see what happens now.

@realreviewsmedia2801

3 жыл бұрын

oh yikes, i will have to check mine. Thanks for the info

@taoforadacasinha9422

3 жыл бұрын

Yeah. It occurs the same with me. I have a 30 A of the same model, and after fully charging my battery at 14,6V, for 2 hours, I've got to drop manually the charger controller PV OFF button, to limit it on 13,8 V, on floating stage, to avoid booling my battery. Unfortunatelly this charger controller does not do this operation automatically.

@MehdiDogan

2 жыл бұрын

aynısından ben de aldım. benim cihazda b1 b2 b3 b4 var. kutuda birşey yazmıyor. bunlar ne olabilir 4 tane akü tipi. hangisi hangisinin acaba.

@MehdiDogan

2 жыл бұрын

@@realreviewsmedia2801 aynısından ben de aldım. benim cihazda b1 b2 b3 b4 var. kutuda birşey yazmıyor. bunlar ne olabilir 4 tane akü tipi. hangisi hangisinin acaba.

@panabanana3973

2 жыл бұрын

No, bo1 is agm

The Amazon description states this is an MPPT charge controller that is superior to PWM. Knowing its not MPPT (Chinese Co using the letters as a secondary "brand name" vs the actual MPPT technology. Nor only is the Co's that resale this product lying, so is Amazon. How tricky! My instructions discuss downloading an app. When attempting to download it I got big scary warnings that it could be "harmful". I'll stick with the manual only for now.

I had one of those. It blew up with 5A!

@kevintewey1157

2 жыл бұрын

I believe I just saw mine frying at 40 A max

@ZephodBeeblebrox

2 жыл бұрын

@@kevintewey1157 Two 10W panels and a 15W panel were way too much for mine. That's a theoretical 3.5A but if the panels were perfectly aligned on a perfect day I'd probably get 5A.

@kevintewey1157

2 жыл бұрын

@@ZephodBeeblebrox they made it without heatsink and fan and the first one I had that burnt-out had a trace without solder I'm not going to use The Load-Out I'm just going to use the battery for my inverter

@ZephodBeeblebrox

2 жыл бұрын

@@kevintewey1157 The load-out can be used BUT I'd recommend using it to power a relay. That way you still get the cut off on low voltage but your're not relying too much on Chinese electronics.

@kevintewey1157

2 жыл бұрын

@@ZephodBeeblebrox that's a great idea thank you Relay

So glad I watched. I had one being delivered tomorrow and I immediately canceled and bought one for $100.

@doverun

Жыл бұрын

I was hoping he mentioned how he found out it's not an MPPT.

These inexpensive $30 to $40 Chinese charge controllers are known to not last very long, not have battery temperature compensation, and not have multi-stage battery charging. If you don't have much invested into your battery, then maybe they're worth a chance. There's another brand that's inexpensive much more durable, and capable. Although it is still made in China, or Taiwan. The brand is called EP ever. I would put that brand close to the American and European charge controllers which are very much more expensive.

@realreviewsmedia2801

3 жыл бұрын

Good information. Thanks for the thoughtful comment, and i might check those out!

Well if it wasn't for the commercial interruptions they be no content at all!

"1.9 Amps currently", that made me chuckle 🤣

@realreviewsmedia2801

3 жыл бұрын

I am fully aware that 1.9 amps is next to nothing lol. It was heavy overcast and it was winter.

@InclusiveDriving

3 жыл бұрын

@@realreviewsmedia2801 I'm not chuckling at 1.9 Amps. I'm chuckling at the word "currently" when described electrical current.

@Maven401

3 жыл бұрын

Like a bad pun

"I'm getting 1.9Amps....currently"........haha...no pun intended All kidding aside can you please let us know when it fails so we get an idea how long they do last.

@realreviewsmedia2801

3 жыл бұрын

I will definitely do that. so far it has been a great little device. I upgraded for a bit, but went back to this one because the new one wouldnt work. oh... pun intended LOL

@nightlightabcd

3 жыл бұрын

I have had three of the MPPT controllers, they were all defective when you get them! Notice here even, when he went to change the settings, up/down, nothing changed and he seems to not to even notice!

@clixium

2 жыл бұрын

@@nightlightabcd you need to hold 1st button for 2 or 3 seconds to enter the settings, then it should work

3 more days I've got left to put up with this stupid controller before I get a better one ! I had it given me .. it does work but in a scary fashion !! I don't recommend it at all !!! Victron mppt or anything victron ya can't go wrong ...

MPPT that’s not MPPT … evil 🦹

Don’t use this controler, the P neg connection will very easily heat up and get fire!

@MikePowlas

2 жыл бұрын

Just because yours may have malfunction don't mean others will. it is a great charge controller

Rest dive

this is a fake device, it gives the battery all the voltage from the panel.

А где перевод,на русском нет никакой инфы.

hahaha thanks for your video

Mppt is the name of the company lol

Terrible mine smoked at 40 A

fake mppt ... that is pwm only

Company name is MPPT SOLAR. 😂

I’ve been trying for a week to set up this controller and I’ve had no luck it’s fucked up. I’m throwing it away I have no idea how to set the parameters what setting I should be in jack shit. The instruction manual sucks. 0 stars

this not mppt

I have had three such Chinese controllers! 2 blue and i orange and none of them work! If you get instructions, they are worthless because they are not about the controller you have! The instructions show 6 displays, of which only 3 are about your controller! Also, the up/down buttons don't work, so you can't change the settings! All three of them were defective! Apparently, all controllers are made in China and they don't work! The controllers are the wink link in a portable solar system system, and if the controller don't work, you have nothing! Did you not notice that when you pushed the up/down buttons to change the settings, it didn't change anything!

am going to use this exact same controller with a massive 415watt ja solar panel in my next video www.youtube.com/@gatecrasher1970/videos

Still selling years later obvious rubbish ,FALSE ADVERTISING .Should not be allowed to sell at all should be jailed for false advertising FEEL THE LOVE FILBZ

i think this mppt is fake

Lol definitely not mppt and 100a lol

"it's. Good controller '"??? It's very dangerous dangerous scam illegal product!!! Risk of fire!!! For you is normal have 6mmq terminal for 100A? For you in this shit can pass 100A???

Misleading? Fraudulent.

I had one it piece of crap

Fake MPPT

@MikePowlas

2 жыл бұрын

They don't claim that it is A MPPT controller.

Total rubbish. Avoid.

Not a good charge controller people bought this from Walmart 100 amp specifications but after running around 30 amps to it it smoked it's burned up it's no good it ain't worth a crap please don't buy this crap and don't listen to this guy telling you that it's good