iSpring Under Sink Reverse Osmosis Filtration System Complete Installation RCC7AK 6-Stage RO System
Time to do another RO system install. This time I chose the iSpring 6-stage Reverse Osmosis filtration system. It had good reviews on Amazon and the replacement filters were relatively inexpensive. I go through the manual and demostrate step-by-step how to install this RO system. I think the directions are pretty clear straight forward, which made this a pretty easy install.
_____________________________________________
Affiliate Links --- As an Amazon Associate I earn from qualifying purchases.
iSpring RCC7AK - amzn.to/3TpUGrL
1 Year Filter Supply - amzn.to/3LCkjir
2 Year filter Supply - amzn.to/3tJtFmb
3 Year Filter Supply - amzn.to/3DiyV3j
O-ring Silicone Grease - amzn.to/48QScXP
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
_____________________________________________
0:00 Start
1:00 Parts included in the system
1:56 Tools you will need
2:25 Step 1 - Installing the Fedd Water Adapter
4:28 Step 2 - Installing the RO faucet
6:16 Step 3 - Installing the Drain Saddle
7:47 Step 4 - Installing the Vertical Filters: Stages 1, 2, and 3
9:50 Step 5 - Installing the Tank Shut-Off Valve
10:53 Step 6 - Installing the Reverse Osmosis Membrane
13:00 Step 7 - Tubing Hook Up
16:05 Leak Stop Valve Installation
17:46 Step 8 - System StartUp
Пікірлер: 204
Used this video to install my RCC7AK in June of 2024 and it worked perfectly. Don’t bother with any other videos.
@TheFixitShed
16 күн бұрын
Thank you!
Clear, concise, & to the point. Excellent demonstration. Walked me through the whole process. Other videos must be using older models because they did not match up with the system I have but yours was spot on. Thank you!
@TheFixitShed
10 ай бұрын
Glad it was helpful! Thanks!
Thanks for guiding me during installation, this really help me more than the manufacturer video. Steps were really easy to follow.
@TheFixitShed
Жыл бұрын
Glad it helped!
This was a big help and very well done. I had a little leak at first and fixed it easily by reinstalling the tubing. But I forgot that the shut off valve was activated by the leak 2 hours later as I checked to see if the tank was full. I made a by pass line without hooking up the stop leak and water flowed normally. Thanks for your helpful video, looking forward to the replacement video.
@TheFixitShed
2 жыл бұрын
Thanks! I really appreciate your comment. I am glad you found the video helpful. I have uploaded the 6 month filter change video. It went live a week or two ago, I think. Enjoy!
@ninabanks2555
2 жыл бұрын
@@TheFixitShed Thank you for uploading the filter change video. Looking forward to viewing it and saving it for the next time we have to do a filter change. I wrote the date down we installed under the sink on the sticker provided by the system. Your video's sure made it much easier to view and put this together for us. Nina and Philip, Fla. Thank You.
Dude you’re the best. Got it done in an hour. Had to replace my old cold water line and shut off valve in the process but this guide was amazing. Definitely subscribed thanks again 🔥
@TheFixitShed
Жыл бұрын
Thanks, I am glad you found it useful. Congrats on your success!
Dude, great video. Actually sowing everything in a good timely manner!
@TheFixitShed
Жыл бұрын
Glad it was helpful!
Fantastic tutorial. Thank you, brother. I was using a different filter system but most of this was still applicable & really useful!
@TheFixitShed
Жыл бұрын
Glad it helped! Thanks for the awesome comment
Went through 8 other videos with conflicting information, yours was right on the money thank you sir you earned a like, comment and a sub!🎉
@TheFixitShed
11 ай бұрын
Awesome, Glad it helped! thank you!
Great Video - bought the ispring specifically because of how good this install video was. Thank you for your help, clear instructions and good video placement. Cheers
@TheFixitShed
4 ай бұрын
Glad it helped!
This video is far better than the official isprings video
@TheFixitShed
6 ай бұрын
I am glad you liked it. Thanks!
Great video. Just finished the install, thanks again!
@TheFixitShed
2 жыл бұрын
Glad it helped!
Really helpful video! Took me an hour and a half and everything seems to be working perfectly. Thanks!
@TheFixitShed
5 ай бұрын
Glad it helped!
This was a lifesaver for me!! Thank you so much for the video
@TheFixitShed
Ай бұрын
Glad it helped!
PERFECT tutorial! Thanks for making my installation easy.
@TheFixitShed
11 ай бұрын
Glad it helped!
Well done installation video! I appreciate it very much.
@TheFixitShed
2 жыл бұрын
You are welcome!
This was awesome and made my install so easy. Thank you for doing this
@TheFixitShed
11 ай бұрын
Glad it helped!
Excellent job. On mine, the "pressure" of holding tank was slightly low, used bicycle tire pump to increase pressure to recommended guideline. Wished I had seen your video prior to installing mine... I HATE directions. Thank you sir!!
@TheFixitShed
Жыл бұрын
Thanks! Glad you liked it
Super helpful! Thanks for making this vid.
@TheFixitShed
Жыл бұрын
Glad it was helpful!
Thanks for the video. Much better than the manufacturer’s. Great editing as well.
@TheFixitShed
9 ай бұрын
Thanks, I am glad the video was helpful.
Thank you man.. just installed mine watching this video because i hate to read instructions lol 😂 thank you 👍
@TheFixitShed
Жыл бұрын
Glad you found it helpful!
Hi there This was the easiest installation video I have seen so far Ty
@TheFixitShed
11 ай бұрын
I am glad you liked it! Thanks!
Hi there - just dropping by to say thank you. This is one of the BEST install videos I could find on KZread for this series of RO system. Do you have a video on when/how to change different stages of filters, and test water quality etc? Thanks again, and keep up the great work!
@TheFixitShed
2 жыл бұрын
Awesome, thank you! I haven't done a filter chang, yet, but will post a video as soon as I do. We have a local water testing lab, so I just pick up bottles from them, give them samples and they send me the results.
@manishgv
2 жыл бұрын
@@TheFixitShed Got it, thanks!
That was very well explained 👏 Thanks
@TheFixitShed
Жыл бұрын
Thank you! Glad you liked it
Great installation video. I like the end part where you show how to flush the system and letting the carbon out until the water runs clear. when its time to replace the filters I will follow your way . I found the water that came out of the RO system tasted awful. RO takes out all the minerals and we are used to drinking water that has minerals, especially if you drink spring water. I found this company Vitev and they have the Remin Ph or Remin CA filters which you put at the end of the system and it adds all the minerals you need to have great tasting water. I use the CA because I don't want to put the my water to high in PH. It also replaces the filter that comes after the membrane and that also gives you more pressure at the tap. Check it out. totally worth it.
@TheFixitShed
10 ай бұрын
Thanks you!
Saved our asses , thanks man
Best installation video!!! Thank you so much for the amazing explanations and great video angles. If you're looking for a video for this filter, look no more...save your time and watch this one!! Thank you man! 🙌
@TheFixitShed
2 жыл бұрын
Wow, thanks! Your comment made my day!
@loupakisathleticcenter9667
2 жыл бұрын
Could you please help me the leak protection... I understand one side goes to the red but what connects to the Grey? Also our water is cloudy, any suggestions? I filled and emptied tank 3x
@TheFixitShed
2 жыл бұрын
@@loupakisathleticcenter9667 The red line is the supply line that delivers water from the FEED WATER ADAPTER to the RO system. You will cut this line in the middle somewhere and insert the leak stop valve. So the red line will go from the FEED WATER ADAPTER to the LEAK STOP VALVE, and then the red line will come out of the other side of the LEAK STOP VALVE and go to the RO system. The cloudy water is probably just air bubbles. If you let the water sit in a glass for a minute it should clear up. If it doesn't, I would contact iSpring and ask them.
@loupakisathleticcenter9667
2 жыл бұрын
@@TheFixitShed You rock!!! Thank you man! Your channel is priceless!! 💯
Thank you so much uploading this video, i was really confuse to assemble when i cleaning all parts of filter , after assembal was wrong when i c this video
@TheFixitShed
3 ай бұрын
Glad it helped
Great video ❤👍
@TheFixitShed
4 ай бұрын
Thank you
It is very helpful!
@TheFixitShed
Жыл бұрын
Glad you liked it. Thanks!
I have this same system in my house. Works well, Best investment to date.
@TheFixitShed
20 күн бұрын
Glad it is working out for you! I am happy with mine as well.
Great video. It made installing my system a breeze. You really need to tighten those vertical filters. Luckily the leak detection uses standard compressed tissue disks and it works very well.
@TheFixitShed
9 ай бұрын
Glad it helped
Great video - Thank you!
@TheFixitShed
4 ай бұрын
Glad you liked it!
This is what I springs video should look like. Way better video for sure.
@TheFixitShed
5 ай бұрын
Thank you! I am glad you liked it.
Great video thanks. I’m having an issue with a vibration in the red supply line right at the stop leak detector after replacing my filters (didn’t do it before) Any suggestions? Thanks.
@TheFixitShed
2 жыл бұрын
Thanks! I would probably disconnect the red lines and the leak detector and make sure there isn't some debris stuck in there.
very informative. much appreciate Sir
@TheFixitShed
Жыл бұрын
Thank you! Glad you liked it
Amazing!! Thank you
@TheFixitShed
7 ай бұрын
You are welcome
Amazing. Saved me $500.
@TheFixitShed
Жыл бұрын
Gald the video helped!
Great video man. By chance would you know if a hose could be T'ed off into a refrigerator? Would love to have filtered water coming out of my fridge as well.
@TheFixitShed
Жыл бұрын
Yes, you can splice into the waterline into the faucet.
Hi! Thanks a lot for the video, very well explained, installation was super easy :) If I go on vacation for a month and I shut off the water supply, do I need do to anything specific when I come back, like draining the tank or that is not necessary ?
@TheFixitShed
Жыл бұрын
Glad it helped! Do you have to? Not really. Running for a few minutes until it reduces to a trickle would drain the tank, and resupply it with fresh water. It wouldn't hurt.
Great video, did you install the locking clips onto the tubing at the drain saddle?
@TheFixitShed
Жыл бұрын
Sure doesn't look like it on the video, I'll check next time I am down there. It probably isn't critical. That is not a pressurized line, so you don't really have to worry about leaks coming from it. If you have a clip to put in there, I would put one in there, though.
Great video Fixit Shed, How is your experience using this RO water filtration system and would you recommend this over any other RO products?
@TheFixitShed
2 жыл бұрын
I installed it 6 months ago and haven't had any issues with it. I just did the 6 month filter change and will be posting that video on Wednesday. The only other RO system I am familiar with is AOSmith which I also made vidoes about. I chose the iSpring because the filters are less expensive. I haven't had any problems with AOSmith, but other people have posted that they have had leaks from the filter sumps.
Thanks man
@TheFixitShed
Жыл бұрын
You're welcome!
Great video! Just installed a system identical. Wish I had watched this first. Has anyone had any failures with these push quick connects? Just curious because I am not familiar with them.
@TheFixitShed
Жыл бұрын
I am sure they have. If you have any issues, you just want to make sure the cuts on the ends of the hoses are as clean and square as possible. A jagged or angled cut can cause a leak in the connectors.
Thank you for this video. Question though... Does the cold water have to be turned off to drain the tank or can I leave that on and it will eventually start trickling more slowly? (30 min in water still strong)
@TheFixitShed
11 ай бұрын
If you are 30 minutes on and it is still going strong, that doesn't seem right to me. The tank only holds 1 gallon. Once that is empty, it should flow at the rate the RO membrane will allow, which is just a trickle.
Great video. I have a old house with a metal drain pipe. Would it still be possible to install this RO system?
@TheFixitShed
11 күн бұрын
Thanks! As long as the diameter of the pipe is the same, so that the drain saddle fits, it should be fine.
Fantastic video man thank you for making it easy.
@TheFixitShed
11 ай бұрын
Glad it helped!
Our system was put in in 2004. They have made a few changes since then. The safety clips the clear sediment filter case. The leak preventer system. Cutting the drain line at a 45 will keep the line from being restricted if it was push in to far. We have the 5 filter system. What pressure should the tank be empty, and when it is full?
@TheFixitShed
8 ай бұрын
They only specify 5-7 lbs when the tank is empty. Pressure when the tank is full can vary, I believe.
Thank you my friends is it helpful.
@TheFixitShed
Жыл бұрын
Glad to hear that
This is a great vid !!! Just one question of anyone knows ?? How do I install a line to the fridge for ice and water?? Thank you in advance
@TheFixitShed
Жыл бұрын
Thanks! I don't have specifics, like what parts you need, but you can splice into the line going to the faucet and run a line to the fridge.
The most important step that I want to add to your video, is that you want to maintain a sterile environment. During the time of which you are adding the filters and putting the tubing together, you want to avoid introducing unwanted bacteria that can grow in colonies inside your system. So I try to breathe through my nose not talking too much, and in addition keep hand sanitizer nearby, avoiding touching the internals too much.
Hello, if I didn’t flush the 3 stages does it ruin the filters? I just connected it and ran the flush through the system. I forgot the part at video 18:20
@TheFixitShed
2 жыл бұрын
I don't think you ruined anything. Probably some of the carbon dust from the filters went to the RO membrane. Probably a tiny reduction in efficiency for the membrane.
Thank you so much for this video! I bought this system but don't even have the tools yet, hence why I'm watching your video! In your case, your RO faucet could be fitted into the existing hole in your sink set. If I don't have a hole, can I just drill it with any regular drill for drilling into PVC pipes (that I will go buy)? Also, at 6:50, you drilled into the vertical part of the drain pipe. I had seen other vids that said to drill the hole on the horizontal part to prevent dripping sounds; was there a reason you chose the vertical part? And would the horizontal part of your drain pipe been sufficiently long to drill a hole there if you wanted?
@TheFixitShed
9 ай бұрын
Any drill is fine for drilling a hole. But make sure you are using a drill bit for metal. (If you use a bit for wood, it will dull very quickly.) The reason I drilled into the vertical part is because that is what the directions said to do. You could probably drill into the top of the horizontal part, but the base of the sink might make that difficult.
@CityscapesTheBook
9 ай бұрын
@@TheFixitShed Thank you so, so much for a quick reply! I'll note that when I buy the bit!
What if my drain pipe was made of copper? Can I drill a hole in copper the same way? I have a titanium coated 1/4 inch bit that I’m gonna use. Install the saddle the same way but is it a good idea?
@TheFixitShed
24 күн бұрын
It shouldn't matter as long as it is the same diameter pipe so that the saddle fits. I don't remember the size of the drill bit , but make sure that is the correct size so that the hose going in there is a snug fit. Otherwise, it may leak a little.
Thanks 👍
@TheFixitShed
Жыл бұрын
Welcome
noticed your reverse osmosis membrane was sticking out a bit and not sitting fully flush inside the canister before you closed the lid, is that fine?
@TheFixitShed
4 ай бұрын
yes. I believe that was fully seated, but if not, screwing the cap on will take care of it.
Hi, I just installed a system like this, 7 stage, and notices that the water flow was clearly reduced when getting water from the fridge. Before it was a direct line and it had pretty good pressure, after the filtration system the flow was drastically reduced. Is this normal or did I do something wrong? Great video, btw
@TheFixitShed
Жыл бұрын
Thank you! probably normal. My RO runs pretty slowly compared to my regular faucet.
At 11:56, is that a sticker on the RO membrane? Doesn't get removed? Also the hole for the faucet opening is 1/2" correct? Thanks for the detailed installation video btw.
@TheFixitShed
2 жыл бұрын
That area on the filter shouldn't get water around it. They encourage you to not touch the membrane cartridge, so I would just leave it alone. If you have to drill a hole, it should be 1/2". I used the hole for the sprayer, which is quite a bit bigger than that, and it is working just fine. Thanks!
@ScissorAward
8 ай бұрын
I wondered the same thing
Dude, Excellent step-by-step details. I really appreciate it. do we really need the RO system with a pump? my water flow is good.
@TheFixitShed
Жыл бұрын
I am not sure that I understand the question. The RO filters the water and stores it in the pressure tank. The RO process is slow so you need the tank to save up the filtered water so that it comes out quickly when you want it. If you don't have the tank the water flow would be restricted by the filters and would just come out of the faucet as a trickle regardless of your water pressure in the rest of the house. I hope that answered it.
@sabai005
Жыл бұрын
@@TheFixitShed Sorry I should have been more clear on my question, thanks for your response, I was asking do I need to purchase a system with a pump? but I purchased RCC7AK 6 after seeing your video and followed your instructions to install it on my own, It's working perfectly good without a motor pump. thanks a lot for your step-by-step instructions. You really did an excellent video here. I really appreciate it.
@TheFixitShed
Жыл бұрын
@@sabai005 Thank you! I am glad it helped. Sorry I messed up on the question, but glad you sorted it out. I actually didn't realize you could get the RO system with its own pump. I'll have to check that out.
By the way, had another Q - I had a leak at the yellow quick-connect on top of the pressurized water tank. Tried reconnecting, inserting it all the way in etc, but did not stop the leak. Finally, I cut the yellow hose about an inch down, put a lil vaseline on hose, stuck it back all the way into the quick-connect, and now the leak the gone. However, in that process, I ended up opening the tank's cap, and all the pressurized water literally splashed up the ceiling! Does this mean I need to check/re-pressurize the tank (up to ~10psi?), or is that normal, and let it be? The pressure at the outlet faucet seems okay - but not too fast.
@TheFixitShed
2 жыл бұрын
It could be that the end of the yellow line had an imperfection, and making another cut was the right solution. If water came out of the tank, then when you reconnect everything, it should repressurize and be fine. If you let AIR out, then you would need to put air back in.
@manishgv
2 жыл бұрын
@@TheFixitShed Didn't let the air out, just the water came out (pressurized). Cool, will leave it alone then :) Drilling the hole in the granite was a ***** ! I hit the steel corner plate of the sink under the granite... and it took some work and lot of patience to get through. But, so happy it is all done and working great now :)
@TheFixitShed
2 жыл бұрын
Drilling through the granite is no joke. Congrats on your successful install!!
can I ask a question? Why does the water come out cloudy, and if it is normal, how long does this process last? thank you
@TheFixitShed
Жыл бұрын
Most likely it is just air bubbles. If you let the water sit for a minute, it should clear up. It seems to happen when water pressure is higher. I have low water pressure so it comes out clear. Slowly, but clear. My friends have higher water pressure (like a fire hose) and theirs comes out cloudy, but a minute later it is clear.
When the tank is filled, do you turn the tank shut off valve back off?
@TheFixitShed
2 ай бұрын
No, leave it open.
Question: Under normal operating conditions, how much water is actually sent to the drain in this system? Let's say you plug the system in, open the inlet valve, let the system fill and don't use any water (like in a "away from home" scenario), how much water will actually be sent to the drain ? I’m considering an installation in which I collect the waste water for cleaning / plant watering but wonder how much water this would actually mean. Thanks
@TheFixitShed
4 ай бұрын
This is a really good question, and I have no idea. It would be an interesting experiment. I like your idea of using the waste water, rather than it just going down the drain.
Good video, just be careful about too many wraps of Teflon tape, fitting could pop off under pressure if not enough thread bite. I also flushed the other carbon filter as well. Surprised at how much carbon comes out. Could plug other filters or membrane.
@TheFixitShed
Жыл бұрын
Good tip!
What no Teflon tape? Okay, I saw that you used it on the tank. Just wondering why not on all fittings?
@TheFixitShed
Жыл бұрын
I have only ever used teflon tape on threaded fittings. I am not sure how well it would work on the other connection. In fact, I could see it making the connections more likely to leak.
One question does the storage tank has to be air up ? Or add air to equal amount of water pressure in the house?
@TheFixitShed
Жыл бұрын
The storage tank pressure should be arounf 5-7 lbs (You may want to check with iSpring to double check that range, but it is close). You have to check the pressure when there is no water in the tank. Over inflating will damage it. Adding more pressure to the tank does not increase the pressure coming out of the faucet.
@willrobinson9575
Жыл бұрын
The tank comes pressurised.
Is it normal to hear water dripping into the drain saddle. It seems to be on and off all day
@TheFixitShed
2 жыл бұрын
Yes, it is normal. The system uses water to wash away the contaminants caught by the filter. Then it passes through the waste line to the drain.
Usually drain is put above garbage disposal drain, right?
@TheFixitShed
Жыл бұрын
I would, if you can
Hi I just bought the same system and i expect to receive it in a couple days. Did you receive results from lab test? How is the taste of water before and after installation? Here in europe this filter cost around 400€, so i hope i did a good purchase 😄
@TheFixitShed
Жыл бұрын
My water tasted fine before and after installation. My problem was lead in the water. We did have it tested before and after installation, and don't actuallt remeber the numbers, but before it was high and after the installation it was at an acceptable level. Sorry for being vague.
I just replace all the filters, but I can’t get the water to come out of the tank, the valve is open. Thanks
@TheFixitShed
6 ай бұрын
If you opened all of the valves you closed to change the filters, the only other thing I can think of is the stage 2 filter. It is directional, and if you installed it upside down, that could be an issue. I have a video on replacing the filters here: kzread.info/dash/bejne/Z4J51MxxlaS6qKg.htmlsi=8-y6RrsetTDM68te
I wanna get this but I'm Renting right now and was wondering if I ever need to plug up the drain hole. What would I do?
@TheFixitShed
Жыл бұрын
If you want to fixt it, you could replace the piece of pipe. Its not terribly expensive. If you just want to plug it, off the top of my head, I would cut a small piece from a pvc pipe (maybe 1" by 1"), use plumbers putty between the patch and the pipe with the hole and put a hose clamp around it.
@eyang7
Жыл бұрын
@@TheFixitShed thx for responding. One more question, how has your system holding up? Has it been filtering well? Would you still recommend it? TIA
@TheFixitShed
Жыл бұрын
Yes. I haven't had any problems with it, and replacement filters cost less than the AO Smith system I got at Lowes.
I flushed my unit like the instructions said but I still have some white flecks floating. Is this normal or will it clear up?
@TheFixitShed
Жыл бұрын
Is it specks in the water ot air bubbles? I have a friend who gets a lot of air bublles. If you let it sit for a minute, it clears up. If it is white particles, that should not be.
@ryanmeyo68
Жыл бұрын
@@TheFixitShed looks more like white particles. I flushed the system for a second time and now it’s just air bubbles. Great video! Helped a lot 👍🏻👍🏻
I think you did this as demonstration? Because you didn't have Teflon on while assembling the water source connector
@TheFixitShed
Жыл бұрын
You can use teflon tape if you want, but there is a rubber seal inside the fitting. The teflon is not neccessary.
Im having problems withe the osmosis filter, the water wont come out from the filter, I removed it to check if the pressure was good and it is, I pushed the osmosis filter to the end of the tube but it's not coming out, do you have any idea? Thanks for the vid
@TheFixitShed
2 ай бұрын
Was this a new install? Were you replacing the RO Filter? Was it working and then stopped?
@greylp88
2 ай бұрын
It's a new install and I've just checked and the water It's doesn't even getting into the tank
@TheFixitShed
2 ай бұрын
@@greylp88 Did it fill the 3 big filter sumps?
@greylp88
2 ай бұрын
@TheFixitShed yes it does, and actually I added more pressure into the tank till 40 psi but nothing, actually I asked for a replacement and they send it but it's happening the same
@TheFixitShed
2 ай бұрын
@@greylp88 If you disconnect the water inlet from the RO filter, as I shoed in the video to flush the carbon out from the new filters, does water come out?
What happens if you accidentally touch the plastic tip on the reverse osmosis filter.
@opithecool
Жыл бұрын
I didn't realize it went further into the housing for the RO MEMBRANE container and had to touch it momentarily. Will that cause a bacterial build up or something?
@TheFixitShed
Жыл бұрын
Probably not a big deal. You could sterilize it with some bleach and then flush the system for 24 hours if you wanted to be sure.
I need replace all the filters, what do I need to buy?
@TheFixitShed
Жыл бұрын
If you have the RCC7AK 6 stage system, I don't see where you can buy just a single set of filters. you can buy this one year set amzn.to/3cnpnLl, but it doesn't come with the RO membrane. You can buy that separately here amzn.to/3Kn9u4i
@willrobinson9575
Жыл бұрын
Call Isprings if you need help. They are very helpful.
No need to fill air into the tank?
@TheFixitShed
2 ай бұрын
Probably not, but not a bad idea to check.when you check the air pressure, the tank has to be empty. When it is empty, the air pressure should be 5-7 psi.
Hi any body can help me i change all the filter but still the water no good I check the water still not good the give me 46 % the water no good I don't know what to do i have the machine to check the water
@TheFixitShed
3 ай бұрын
I am not sure what the 46% reading is you are getting. If you are still getting bad water, something isn't hooked up properly. Hard to tell what it is from here, but go back over it and make sure everything it hooked up with the proper flow direction.
How much water will go as waste in this system
@TheFixitShed
4 ай бұрын
I really don't know. It uses some to keep the filter clean, but it goes directly to the drain. I haven't ever measured it.
So... what is the tank for? What does it do?
@TheFixitShed
2 жыл бұрын
RO filtration is a slow process, so the tank holds filtered water so that there is some available when you need it, and you don't have to wait 5 minutes for it to fill a glass of water.
@WebGuyTV
2 жыл бұрын
@@TheFixitShed OK, that makes sense. Thanks for the reply. You've had this installed for 7 months now... any regrets? any additional info?
@TheFixitShed
2 жыл бұрын
@@WebGuyTV The replacement filters are a little pricey. Other than that, it has been ok. I have seen a bunch of review online with complaints of leaking, but I haven't had any. I installed on at my son's place and opted to go with iSpring. It had good reviews, and the replacement filters are a little less expensive. I have done a couple of videos on that system as well. If you haven't bought a system yet, I would check them out as well.
@WebGuyTV
2 жыл бұрын
@@TheFixitShed Awesome. Thanks, brother.
@TheFixitShed
2 жыл бұрын
@@WebGuyTV oops! This is the iSpring. AO Smith is the one with the pricey filters and leaky reviews. Sorry about that
My reverse osmosis cap does screw back🤦
why didnt they get a chrome faucet?
@TheFixitShed
Ай бұрын
that would have been a nice option
Did any of you skip installing the Leak Stop Vale? Asking for a friend.
@TheFixitShed
2 жыл бұрын
Someone I know real well skipped it. It hasn't been a problem for him so far.
@gruvergoods6430
2 жыл бұрын
@@TheFixitShed Hahaha thanks for the video. 👍
@raymondcarter9810
11 ай бұрын
Asking for a friend, he says 😂
Nice video. Papered Instructions are incomplete.
@TheFixitShed
2 ай бұрын
Thank you!
Apparently I’m doing something wrong. It’s all hooked up and it’s still not working.
@TheFixitShed
Жыл бұрын
Hard to say without more info. I highly recommend contacting iSpring for tech support. If you go to their website (123filter.com), the contact info is there (phone, text, fax...). Or open a ticket at the top of the page.
when the hose that goes to the drain stops releasing water
@TheFixitShed
Ай бұрын
I would start with removing the hose, and trying to clear any obstruction with compressed air.
How you going to fix anything with a Black and decker drill. 😂 Jk that's for the video.
@TheFixitShed
Жыл бұрын
LOL
No easy steps here , rather install this immediately when moving into newly building apartment.
Those are channel locks not pliers 😂
@TheFixitShed
10 ай бұрын
LOL
Saved our asses , thanks man
@TheFixitShed
Жыл бұрын
Glad the video helped!