8:47 - "That area hasn't been touched in years." I know how it feels...

@colinleder5683

4 жыл бұрын

Maybe I can help 🥺 👉🏼👈🏼

@MrRedstoner

4 жыл бұрын

@@colinleder5683 Hey there cowboy, mind the social distancing will you

@JKA-TML

4 жыл бұрын

Colin Leder *COMMENCE DOCKING*

@calebfleming1607

4 жыл бұрын

@@JKA-TML took me a minute to remember what that is. Gave me a good laugh

@allthingsmotor1073

4 жыл бұрын

@@colinleder5683 Chinese finger torture for the win

FYI: there is a recall on harbor freight jack stands. Edit: certain model #s. To all saying thanks, you are welcome.

@omarpadilla8033

4 жыл бұрын

just what i thought when a saw him under the car

@BenDunlop

4 жыл бұрын

Fuark...

@SpartanOfLuxon

4 жыл бұрын

I was about to comment. I have those same jacks, they aren't the recalled versions.

@Wpjgdmtu

4 жыл бұрын

Thank you. I have some and will be checking them against the recall.

@corgi5542

4 жыл бұрын

I have some and didn't know. Thanks!

I guess Zach just forgot to mention it, that this change also works the other way around. If you start experiencing vibration over time, mostly through the seats while even sitting still at the light in neutral, it's almost certain your mounts are shot to bits. It gets worse if they are oil filled or hydraulic ones. They progressively worsen. Changing them with new brings back the comfort. And always change them all at the same time, don't try to cheap out by just changing one - this will really bite you in the ass. It's like changing the brake calipers only on one side of the car.

Great fix. And great note about avoiding cross-threading. I've found the best way to ensure thread match is to set up the fastener as if I'm ready to tighten (with forward pressure), slowly turn in the direction of loosen until I feel the click, and then turn to tighten. Most nuts & bolts can be blind-aligned this way with little hassle.

This is definitely my favorite series on Donut and it's so helpful because Zach always does projects and upgrades that are doable and realistic for the average person. The idea of low-key, inexpensive but impactful mods to cars is right up my alley.

@herejust4cars723

4 жыл бұрын

It's inspiring!

@harrypotty5643

4 жыл бұрын

So true also cars that people own not some mall crawler overpriced crap

@joshuafallet5690

4 жыл бұрын

Yeah it's very informative and down to earth.

@zoerhoden2490

4 жыл бұрын

Same bro he doesnt do the flashy mods he does stuff that help put t make the car stronger i fucks with that

@harrypotty5643

4 жыл бұрын

@@zoerhoden2490 Yes making a vehicle better probly all things the engineers wished they could have added but constrained by mass production.

8:29 "These should last the life of the car." Every part will last the life of the car, if you're reckless enough. :)

@jacobbenns6090

4 жыл бұрын

Never wish for a lifetime supply of anything from a genie....

@mybackhurts7020

4 жыл бұрын

I don’t think I’ve ever taken back a lifetime warranty part

@aidanlorimer5413

4 жыл бұрын

okay you right

@LXIXTurner

4 жыл бұрын

Lol most parts have to be replaced after time

@faloolalisboa6377

4 жыл бұрын

@@jacobbenns6090 why?

" Today we replace low key easy to install parts " Lifts the engine out

@JamesLee-xk6dk

Жыл бұрын

Right. Lmao.

@WarriorOfEden3033

Жыл бұрын

Had to do the same thing to install my headers but you won't have to deal with broken studs I hope 🤣

The "is it worth it?" Series teaches a lot of things I honestly wouldn't have thought of, like this video, I didn't realize everything engine mounts can effect

Yoo I love this series. Hopefully whenever I get a project car I can look back at these videos for help. You guys are awesome!

@trevorflanagan4873

4 жыл бұрын

Yeah, this series is awesome!

@Donut

4 жыл бұрын

We'll be here!

@pad0965

4 жыл бұрын

Same bro

@irwinbonilla-guerra4196

4 жыл бұрын

Definitely hope these guys and these videos are around for a long time.

@LegendStormcrow

4 жыл бұрын

A few years back I passed a project up for engine twerking. I means she danced everywhere. Wonder if this was the issue.

Hey Zach loving the series. Just a heads up have you heard about the recall on those Harbor Freight jack stands? Might want to take a look just in case your set is affected. Stay safe and keep bringing us awesome content!

@Donut

4 жыл бұрын

we checked! they're good! i hope!

@krkhans

4 жыл бұрын

haha literally hit ctrl+F Harbor Freight to see if someone mentioned that. Good lookin out!

@romanmarmalyukov4428

4 жыл бұрын

Engine mounts changed my Fiesta ST for the better. Good upgrade, and good video 👍

@pickcameron

4 жыл бұрын

Well I sure didn’t!! Thanks for the heads up

@ShadowSpark0039

4 жыл бұрын

I bought mine from jegs.

Favorite series Favorite person Favorite car is how I'd explained money pit

@jensonwaggoner1761

3 жыл бұрын

exactly

@MadLadMartyMcFly85

3 жыл бұрын

Where has bart gone? I like science garage

@LoklinNord

3 жыл бұрын

Favorite waifu too of I'd have to guess?

@MadLadMartyMcFly85

3 жыл бұрын

@@LoklinNord what?

@LoklinNord

3 жыл бұрын

@@MadLadMartyMcFly85 it's an anime thing

You know the camera guy is into his cameras when a socket gets yeeted and he checks the lens in 0.8s

@AisuruMirai

2 жыл бұрын

um, you know a camera guy is "into his cameras" when _he's a camera guy._

Favorite show on donut so far- when can we expect an episode where the miata gets new brakes?

@tallonmetroids271

4 жыл бұрын

Was just thinking about that.

@alexholst6503

4 жыл бұрын

Wilwood kit with a variable proportioning valve would be sweet

@ThatStolenZ33

4 жыл бұрын

Mybe a turbo kit?!?!?

@Kessoku

4 жыл бұрын

a carbon ceramic one.

@kungpow8062

4 жыл бұрын

@@ThatStolenZ33 Turbos are expensive jobs and from what I've heard the miata doesnt take to them well.

Pros: Your car's engine will not vibrate. Cons: The rest of your car will.

@mountaindew267

4 жыл бұрын

Exactly! I replaced all 3 of mine and as soon as I started her up I thought I f*cked up. But the NVH went way down after a short break-in period. Can confirm shifts feel way better.

@olifilipe

4 жыл бұрын

Khalsa 1699 you beat me to it. Once I replaced all the old rubber on my car with polyurethane bushes and engine mounts. Took me 5 minutes to order stock engine mounts again. The suspension bushes were totally fine.

@jclark1693

4 жыл бұрын

A buddy of mine has an S13 with a hard mounted engine, it’s rough. Very “race car.” I actually have mounts I haven’t installed in my own Miata yet, after hearing about people going back to stock after using the poly mounts I got the Mazda Speed performance version. Essentially stock rubber mounts, but slightly stiffer. Sounds perfect to me.

@andregross7420

4 жыл бұрын

Depends on the engine, the engine style, and if theres vibration compensation like a balance shaft. I have solid UHMW mounts in my e30 with an inline 6, and I cant tell any difference. Doesnt move any and because its a naturally balanced engine, its super smooth.

@kadeemisgone6647

4 жыл бұрын

This is so bad for a 3 cyl. Car hahaha

6:05 "How hard can it be" _Famous last words._

This series is hands down a great way of showing you how to take care of your ride and learning alot of what's in your ride to make it work in the first place....good stuff, straight up 👌

When he said. “BHA WAAAAAAON”. I FELT THAT

@kennethkruse9267

4 жыл бұрын

Anmol, the period goes inside of the quote in American English.

@sleepyancient6655

4 жыл бұрын

@@kennethkruse9267 There's also the issue of a lack of commas, including the period that you mentioned, which shouldn't be a period. Add to that the unnecessary use of the space bar, and a superfluous and incorrect use use of all-caps outside of the quote-which should be replaced with an exclamation mark. Here's what fixing the problems looks like: 'When he said, “BHA WAAAAAAON,” I felt that!' But really, I'm just being sarcastic. The original comment, however incorrect in punctuation and grammar, was sweet. :)

@timmynoshoe8404

3 жыл бұрын

@@kennethkruse9267 and real english too ;))

@broidk8291

9 ай бұрын

@@kennethkruse9267only if you are quoting the end of a sentence. the period would go outside as that was the end of the actual sentence

This is it. This is mid car. The perfect vehicle with all the middle priced mods.

@johnnyloveee

4 жыл бұрын

Legendary Cantaloupe I thought the same thing

@rorybrookes

4 жыл бұрын

Miata Is Always The Answer

@Treyence

4 жыл бұрын

I’ve always wanted a miata even during the winter seasons but I can never get past the fact that if you get hit your most likely dead

@MinecraftPro97k

4 жыл бұрын

My sister wants a 2015 Miata.

@Gaziran_Pingo

4 жыл бұрын

Broooo...

"So that when we disconnect our engine mounts, nobody dies". *uses a Harbour Freight Jackstand*

@kylecampbell5812

3 жыл бұрын

I believe that a certain harbor freight jack and a snap on one are exactly the same just different paint

@420sx3

3 жыл бұрын

@Meme Man 😂😂😂

@deejeh9494

3 жыл бұрын

@Meme Man harbour colour parlour. "USA"? More like "SA" seeing as USA doesn't care about "U".

@SpencerLemay

3 жыл бұрын

@@deejeh9494 "harbour colour parlour" are all considered incorrect spellings in the USA. My spellcheck even underlines them red. You don't even pronounce the extra 'u' so why care? UK pronunciation of "harbour" sounds more like harbuh to me anyway.

@Tacticool_Mutton_Chops

3 жыл бұрын

@AJ Hauter Imagine being this upset because somebody made a joke about Harbour Freight.

Dude really stiff poly mounts are amazing. I had solid mounts installed on my car for a while and while it was a little rough as a daily driver, the throttle response was awesome.

This show is great, Zach! You’re a great host of a DIY-style show - knowledgeable and not afraid to get your hands dirty! Can’t wait to see what you do next

Zach: did not use treadlocker ChrisFix: *panic scream*

@williamzouroudis7816

4 жыл бұрын

This one made me smile

@moXon460

4 жыл бұрын

ChrisFix would have also painted half of the engine bay while the mounts were outside

@theuselessknight6021

4 жыл бұрын

Chris would also panic if he saw Zach throw his torque wrench on the ground - it's a precision tool after all. Also, with all the extensions he mounted on the wrench, it'll have a noticeable margin of error.

@bc5706

4 жыл бұрын

@@theuselessknight6021 In fact, the biggest culprit causing that error would be the swivel socket. It greatly reduces transmitted torque with increasing angle --> T*cos(a). If we guesstimated the angle at which he was torquing to be 45°, he would've been below required torque by about 25%.

@gboyspeed

3 жыл бұрын

Dont forget soapy water

11:43 something falls off from the trunk lol

My local store ran out of engine mounts of my toyota corona St190. It had a 2 ltr 3sfe engine with manual gearbox. So I just added polyurethane to the torn bushings and it worked. Loved the way it handled after that. No lag in engine when shifting and moving in first gear. Burn out felt awesome too.

What up Zack - Love the show! You've been an awesome addition to the Donut Team!

@Donut

4 жыл бұрын

Thanks mate!

@juliodiddo9239

4 жыл бұрын

He is, indeed. Pretty cute tho

Can we just appreciate that zach looks like an actual rom com character

@thechannelofultimatedestin4720

4 жыл бұрын

He's the laid back approachable guy that teaches the uptight career woman how to slow down and enjoy life, and maybe, how to love.

I love this channel and I'm a huge fan of all the series, but Money Pit is MY FAVORITE. Zach is such a great addition to the team. Keep up the great work!

I have learned so much watching Money Pit . Zack explains every thing so well . Gives me so many new goals . Thanks Zack. Great work car is looking good.

10:31 *casually yeets torque wrench on the ground*

@creativegta

4 жыл бұрын

Dude I felt that when he threw it.

@mackjones7688

4 жыл бұрын

Guys! It'll be okay. He borrowed that torque wrench from a friend.

@anarchyamp

4 жыл бұрын

😂

@jasonlafountaine9168

4 жыл бұрын

I flinched when I saw that, I swear I could feel my grandpa swatting the back of my head😂

@benstake5490

4 жыл бұрын

Doesn't matter anyway because he wasnt close to being accurate with that my extensions anyway

Me cleaning my spark plug with 1dollar sandpaper: MONEY PIT

@ShortArmStrongArm

4 жыл бұрын

Spark plug:$2.95

@702johnny

4 жыл бұрын

Wire brush it instead. Brass brush. Then hit it with some brake or carb cleaner. Then if you have it, some compressed air. Good as new. Lol.

@savagesock3598

4 жыл бұрын

@@702johnny buy a new set....

@Plur307

4 жыл бұрын

@@702johnny Time is also worth money. I would rather spend a couple bucks on a new plug than do all that just to have a mediocre used plug that is still worn.

@shona5512

4 жыл бұрын

@@Plur307 It probably takes less time to clean one than it does to get to the store to buy new ones.

You know what I love? This channel!!! So legit and unbiased. Keep it real bro!!

Nobody: Teachers before they draw something: 5:23

Now I'm wondering when the brakes are coming up

@bingcringing

4 жыл бұрын

Me too

Now you’re going to be able to put down all 70 hp to the wheels

@angelgjr1999

4 жыл бұрын

Lol true

@ben10nnery

4 жыл бұрын

Mo powa baby!

@mackjones7688

4 жыл бұрын

That's a lot of power for a go kart.

@trixnhoez2964

4 жыл бұрын

@@mackjones7688 no it's not, it's not even much HP for a motorbike lmao

@InsanitySkullZ

4 жыл бұрын

@@trixnhoez2964 that's a ton of power for a motorbike, go cart, or a shopping trolley like a Miata

im using this series to determine what parts to buy of my 1990 1.6 miata. its been great help

Literally the day after I watch this my friend calls me and says “so my right engine mount is busted...” Love this content!

Innovative Engine Mounts 💯 Currently running the softest version (60A) with 420whp and I think it's a perfect balance between NVH and performance.

@Donut

4 жыл бұрын

I was worried the 75s were gonna be too harsh, but they're really not bad at all! Bet the 60s are pretty great

@TheCarPassionChannel

4 жыл бұрын

@@Donut I tested both the 75's and 60's, and also a set of AWR 70's. I like the 60's the best, possibly because the exhaust is decently loud on my car already. I think just the design of the Innovative mounts is great so even the 75's aren't too harsh.

@nathanfrase9687

4 жыл бұрын

I’m running 70 durometer AWR mounts one my 92 NA. Did the same mounts on my NB2 when I had it. Motor mounts are 100% worth the price

@flameninja00

4 жыл бұрын

I have a set of SuperMiata hybrid mounts waiting to go on. One is a pretty stiff SuperMiata mount, the other is a Mazda Competition mount

@nathanfrase9687

4 жыл бұрын

Drew Bond if you’re on stock mounts you’ll find a wild difference once they’re on. Biggest things you’ll notice is more direct shifts and throttle response. Just like in this video my stock mounts were to totally torn in half

I've been binging all these episodes once a week. They give me major inspiration for my 96M edition Miata.

@Donut

4 жыл бұрын

ooh M edition!

@suprastevio2264

4 жыл бұрын

Such a dope car man...

@lugia021

4 жыл бұрын

@@suprastevio2264 she's a lovely thing. Such a big upgrade from my '91 and '93 that I had previously

We appreciare you a lot too! You give us so many great, inexpensive, and effective ideas that practically anyone could do with a bit of determination.

Money pit series is hands down already my favorite on the channel, love the content, can’t wait to see where it goes!

"You never thought to change your engine mounts" _laughs in first gen Mazda 3_

@ThatMazdaGuy

4 жыл бұрын

I've got a first gen and a third gen 3 and I still love my first gen more. Granted it's got quite a bit of work (and 88 durometer mounts) but it's just so much more direct than the third gen

@jessemartin2698

4 жыл бұрын

+1, RMM was one of the first mods and made it so much funner to drive and kinda made it feel like more of a racecar than it really is. got a first gen 2.3 5door

@Raam371

4 жыл бұрын

my 08 speed 3 just had a pmm blow, but my reg 2008 3 is fine luckily

@Alex_bkr10

4 жыл бұрын

Laughs in 1995 lexus sc400

@panzerveps

4 жыл бұрын

reminds me that the transmission mount on my Jetta is shot....

This series in 4 months: how to engine swap your car at home

I have a red 1989 Mazda Miata N/A and most of it is stock so this series is what will get me through the summer. So helpful and entertaining

Loves this series thank you so much I got a Miata a little less than a year ago 97’ so this is extremely helpful

5:00 That "oh sh!t" look we all have when we knowingly do something stupid and don't expect the outcome lol

10:00 "Sa-weet" just gonna drop that calibrated torque wrench on the ground.

@fastbicyclerider7300

4 жыл бұрын

Liam Mulcahy lol

@facemcshooty3046

4 жыл бұрын

Also torquing with a uniwiggle

@sirwarrior

4 жыл бұрын

@@facemcshooty3046 and a 3ft extension

@benfillman4049

4 жыл бұрын

@@facemcshooty3046 I'm not super well versed in mechanical stuff what's the problem with doing that?

@NotStephenColbert

4 жыл бұрын

@@benfillman4049 You could throw the timing out of wack in it as well as damage small parts in it, but he did not really toss it down too hard. He also set it down on that AstroTurf or whatever he has in his garage so I doubt any damage occurred, and the timing is surely fine. He seems to know what he is doing. haha I think people are just nitpicking like they always do.

I literally was trying to decide engine mounts for my mazdaspeed and after watching, I went with the Innovative mounts; they installed just as easy and slick as they did on Zach's Miata.

Those are nice-looking mounts and 75 durometer sounds just about perfect for a performance engine mount. Just enough flex to not rattle themselves apart. Slick install. Gonna remember some of your tricks when I do mine.

This is I believe the best show you guys have done since hi low. It is very informative and Zach is a very good host. Makes me want to start a project car.

This is quickly becoming one of my favorite series.

You;re so right about the change of feeling. I concedentally had to swap 2 of the 3 engine mounts in my car a few weeks ago. It's 20 years old and i got oil all over the mounts because i;m an idiot. I got the new ones in and it feels so much tighter i'm amazed it can feel like that. The mounts were already off when i got it so i never experienced it like that. Even the cluth and shifter feel more precise.

This is an awesome series I just got a 1990 Toyota Supra turbo as a first car and I am learning a lot of what to do with it and keep it perfect

Love the show Zach I think it’s my favorite on donut While the Miata is obviously a race car I still want it to be comfortable 😂😂 Thank u so much Zach and all of the donut crew that heart means a lot to me thank u for making my day love u guys ♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️

@THENOOBISYOU

4 жыл бұрын

@scottbatchelder2879

4 жыл бұрын

Sorry I like up to speed

@S42069

4 жыл бұрын

Zach is the prettiest, but James will always be the best.

LMAO WHEN HE THREW THE TORQUE WRENCH 😂💔

Just bought a set of engine mounts for my 04 CR-V a d I am super excited for them to arrive

This is the kind of builds i love, slowly progressing and doing mods that are worth it and quality parts

I JUST bought a car yesterday that needs new engine mounts. I had no idea what that project would entail, but after watching this video I feel a little better about my knowledge. Keep up the good work and thanks for providing guidance for us novice at-home mechanics!

No one: Never anyone ever in the world: SO LIT MOBILE JUST SENT ME THIS WIRELESS BATTERY PACK

@Wpjgdmtu

4 жыл бұрын

Gotten this ad 80% of the time over last 3 days. Guy wears a nice watch, must be legit.

@RichEdwards

4 жыл бұрын

*_Finger gun points at questionable product_*

@jamescantagallo179

4 жыл бұрын

I see your Wireless battery pack, and raise you: Hey Guys, so Bespoke Post just sent me this box...

@iplaysdrums

4 жыл бұрын

@@RichEdwards I don't know why the finger gun pointing bugs me so much but IT BUGS ME SO MUCH

@garrettwight1027

4 жыл бұрын

Omg I know that and "you're not a dish!" From Dr. Squatch ;(

Thanks for the demo man that was a big difference .

Your bolts lined up so much easier than mine. I have an 01. Using stock mounts I had to detach the bracket from block on drivers side. Bolted the mount to frame on drivers side. Lower engine until passenger side was lined up, then make tiny adjustments w/ jack until I could get engine to line up on drivers side and bolt bracket to block. Big improvement, I went with the mazda comp mounts.

The fact that donut still shows appreciation to their subs after 3 mil shows how humble the car community is.

This man is living the Dream! Hopefully we can all post our project cars to somewhere so we can show off what Zach taught us

@c4onmylip

4 жыл бұрын

Post it on the Donut reddit page, you might even get a shoutout on one of the shows for it.

@KiranPatel-fk1pg

4 жыл бұрын

Living the dream?

So glad to see your doing bushings they are one of the most overlooked mods but for cost of performance they are great. I might reccomend a press and a prothane kit for the rest

Well love to see a money pit episode about transmission mounts or even a episode suspension bushings or even about body mounts

*IMORTANT* there was a big recall announced on harbor freight jack stands yesterday. So if you or anyone you know has them, TAKE IT BACK

@disrailigammons5144

4 жыл бұрын

I think its only on the newer jack stands not the older ones from years ago. But I could be wrong.

@aphex412w

4 жыл бұрын

3 ton from dec 2012 to March 2020 6 ton from June 2013 to November 2019 item numbers 56371, 61196 or 61197

@peejaywheeler5945

4 жыл бұрын

3 and 6 ton models were affected: images.harborfreight.com/hftweb/recalls/Jack-Stand-Recall-56371_61196_61197.pdf

@kevinswenson3345

4 жыл бұрын

He ain't lifting an f350 here.. pretty sure he's fine lifting a miata with any harbor freight jack stands, plus it's only for the "paw" to fail, the stand will still hold the vehicle.

i’m 3000% using these tips for my AE86 build this is my favorite Donut show!! love this Zach!!

i love the fact that they do each improvement as its own video so that you could do one of these mods on your own car and have a great idea of what to do

I picked up a 1990 right before this series started and have been slowly nursing it back into good shape. This is a really great practical mod series!

@roddydykes7053

Жыл бұрын

How’s it doing now?

I love this series, it's really the thing that has truly inspired me to start saving for my own project car!

Brooo, this series is flipping amazing. It's really helping me with quarantine. Thanks, man.

5:00 I swear almost everyone has done this and somehow not hit themselves in the face lol

Great video, always informative and entertaining! Only thing that triggered me was the soft top clamps being in the open position as you drive. ;) Donut rocks!

*Throws down torque wrench* 😒

@davechristian7775

4 жыл бұрын

cringed

@nite82hawk

4 жыл бұрын

Better get that thing to metrology ASAP!

@mariohernandez126

4 жыл бұрын

Torque wrench that’s been dropped can’t be trusted

@onlinepaymoney

4 жыл бұрын

@@mariohernandez126 they also don't work with extensions

@nandernugget

4 жыл бұрын

@@onlinepaymoney they work, they just aren't as precise as they could be.

This is by far my favorite Donut show, I'm excited to learn something new every Wednesday! Keep it up Zach!

Hey I watch theses videos every time you post them thanks you’re helping a lot with my vw golf mk4 project

Gotta love the nail holding in the handle to the floor jack👌🏼

Yes, I look forward to this show every Wednesday! Keep up the great work Zack!

1:00. What?? That was smooth!

@SATCHELVI

4 жыл бұрын

af

5:48 so genius. ILY Zach!

I just rebuilt the entire front end of my car, need to replace the rear motor mount and the front strut tower brace. Super fun project, learned alot, took about 4 days now I'm just waiting for a chance to adjust the suspension to the right ride height and dampening and I'll be set. The PMM alone made a noticable difference as the oem one was totally shot

Here's me looking into them left night and boom! Donut media helps out 😁

This is such a good series. Host + concept + production value = home run

Slowly learning about car stuff while nearing in to buy my own project car... this is hell'a educational, Thanks Zach!

Thanks for everything you guys do! I love it!

Dude how you made this so fun and interesting I'll never know. 10/10

The way he threw the torque wrench on the ground, hurted my soul.

@CookJunkie

3 жыл бұрын

Kiss accuracy good bye 😂😂😂

@jadelees9005

3 жыл бұрын

You don’t even need to use it really

@CookJunkie

3 жыл бұрын

@@jadelees9005 you do. You could potentially over Torque it or under Torque it. Don't take my word for it. Research. Learn. kzread.info/dash/bejne/nYir0qNrqa2eYdI.html

@christophersoto5237

3 жыл бұрын

Hurt*

@jadelees9005

3 жыл бұрын

CookJunkie nah not really. If you’re skilled enough you can just feel how tight it should be.

My friend just got a miata when this show started so it's been cool to see all the stuff we can do to his Miata to make it handle and feel better

Great vid for hilow season 2 def use the frs/brz/86 platform

I think you actually tore the old engine mounts apart when you jacked it up. I did the same thing on my car by mistake and had to get new ones😅. You were supposed to shake it around a little as you jack it up to loosen the mounts then they come out easy, but oh well haha. Great video👍

This Series in just one week has helped me like crazy, BUT I think I may have done something stupid... I need advice (critical help) because I just got a 1989 Alfa Romeo Quadrifoglio (Spider) and honestly the only thing keeping me motivated is how easy you guys have made me understand little by little the functionality of every single thing working in my car (at least what I need to know to some extent) So Hopefully I can learn enough to show you guys little by little the progress you've helped build.

@normalnon-spyperson

Жыл бұрын

It’s been 2 years. Update?

@crypt9268

Жыл бұрын

@@normalnon-spyperson he didn’t even say what he needed help with

@bikeislife8405

11 ай бұрын

Do you still have the car?

I love the nail through the harbor freight jack handle, been there before.

Just replaced the engine mounts on my 92 BMW 525i, replaced with stock OEM but the old ones were 28 years old and it feels so much better than it did before. (Plus one of the mounts was sheared in half XD). Might get some Polly or Solids in the future though when i start actually upgrading the car for performance rather than replacing all the old stuff.

Money pit is my favorite show from donut. Keep it up Zach

Love this series Zach and also when season 2 of HiLow?

this is just my favorite show in Donut, love from Mexico

The rear mount on my transverse V6 took me like all day. I envy the joy and ease of this

Zach you’re a great host. Hope your there for the next season of hi low (you should do a lancer evo)

@chinkilagabombo4056

4 жыл бұрын

yesyesyesyes

at 11:45 there was something on the back of the car that fell off

@funnyzoneboy8259

4 жыл бұрын

It was just black on the road

@MrMathoks

4 жыл бұрын

Nope! Just music and road markings.

@bloodraven2o1o

4 жыл бұрын

@@MrMathoks No, look at the trunk

@crab9980

4 жыл бұрын

no hes right look at the top of the trunk

@trtcommunity9248

4 жыл бұрын

Very observant.

I'm running Innovative mounts in my project and I'm happy with them!

Saving every one of these videos!!! Keep them coming