Is Titan 13 overhyped? | T13 unboxing and review!
Фильм және анимация
Yep
Discord: / discord
TikTok: www.tiktok.com/@that_stikbot_...
Insta: thatstikbotinst...
Twitter: x.com/goosehamlin?
Creator code: GooseHamlin
Klee’s video: • Lucky13 & Dummy13 (Tit...
Chuzzle’s video: • T13 Vs Stikbot - An in...
Dummy 13: www.printables.com/model/5931...
T13 website: titan13toy.com/
T13 account: www.tiktok.com/@titan13toyus?...
Music used: stardust speedway
||VIDEO CHAPTERS||
0:00 Unboxing/Initial thoughts
0:54 Overview
1:51 Review
7:03 Where to buy
7:52 Closing thoughts/Outro
#stikbot #t13 #animation #lego #toy #nostalgia #stopmotion
Пікірлер: 568
*TWO MISTAKES I MADE* First, the hip joint was supposed to be that way, it’s not broken 😭 It didn’t affect my opinion in anyway but it’s a mistake I made nonetheless. Second, there is a staff attached to the sword and guns. I assumed it was part of the support so I threw it away 😅 Some instructions or indication of it being an accessory would’ve been nice…
@bendyzillathechaosindorapt8359
3 ай бұрын
Ok
@Yourmomiscoolat3am
3 ай бұрын
Lol
@lucaskimp6264
3 ай бұрын
E
@Rover_27
3 ай бұрын
E
@razorwave95
3 ай бұрын
mine didn't even come with a staff at all plus idk if I went on the wrong website or something but there were only seven colours available
thank you for knowing the fact that the titan 13 is just a blatent theft of the free dummy 13 model found online most creators are so oblivious to do their actual research but you did. im def following your channel and videos now
@GooseHamlin
3 ай бұрын
I don’t support those people, but I’m glad soozafone was able to license Titan 13
@cringehat3r
3 ай бұрын
@@GooseHamlin yes but it’s still stupid they called it titan 13
@skittlesmm1128
3 ай бұрын
@@cringehat3ri agree
@JrJ422
3 ай бұрын
Soozafone makes fantastic models
@JrJ422
3 ай бұрын
Soozafone made 3 other 13 that take between 1 to 3 hours to print they are the easy 13 lucky 13 mini13
Wanna know what’s sad? This is not even the original creators work. It’s just someone stole it. In fact this is all over the Internet and it doesn’t belong to him.
@arandomkidwc7388
24 күн бұрын
NAH Fr?
@KarosYT
20 күн бұрын
Yeah the model its called dummy 13@@arandomkidwc7388
@hoenam4045
6 күн бұрын
@@arandomkidwc7388Yes absolutely, most of the ones selling online where I live are from china and they're selling it for like less than a dollar per figure
@TUFT180
5 күн бұрын
Its dropshipping
@MaskMan1Official
4 күн бұрын
Yes but the original designer said you could sell it and do whatever you want with it,
... 8:45 That's what's so hype about it. It was a random guy that designed it on his free time. If you had a 3D printer... You could print one yourself. For "free" basically. That's exactly what's so cool about it!
I'm gonna tell you rn, I have a 3d printer. I make and sell other figures from soozafone, and sell them to kids at school for 5-7 dollars with accessories. There are tons or fan made extras online for Titan 13. That is so overpriced. 10-15 would really be a fair price with shipping and production.
@AlphaWucharia
3 ай бұрын
Do you sell online or mail them to ppl cause I would buy one off of you because the t 13 seems pretty cool but I don't want to pay 20 dollars for it
@Daniel-cr7vx
3 ай бұрын
Honestly I already thought it was $10-$15 to start with but $20 is crazy
@crowmage61
3 ай бұрын
@@AlphaWucharia it's 20g of filament. So production price 0.80$
@EFM_95
2 ай бұрын
@@crowmage61plus the price of electrical energy
@outzymes3636
2 ай бұрын
i got 5 of these for 10 bucks, 15 for one is highway robbery 😭😭😭
Watching this before my power goes out from bad weather!
@GooseHamlin
3 ай бұрын
I hope it doesn’t go out…
@speedbird1529
3 ай бұрын
Mine went out :(
@darleneschuler6399
2 ай бұрын
@@speedbird1529 how if its out then how did you comment?
@Bluebotsb
2 ай бұрын
@@darleneschuler6399maybe he did it after it went out??
@cheeesyyrat
Ай бұрын
@@darleneschuler6399sometimes people have back up batteries for internet or lights after light go out
Imo, there is no contest in the first place. A T13 is a more flexible, posable action figure for more complex scenes, but a stikbot seems more as a goofy but still amazingly posable (now I'm wondering if this is a word). It just really depends on your style.
@X-Stopmotions
3 ай бұрын
Watch his video it’s gives more reasons why stickbots are better
@josephkashompa2450
3 ай бұрын
i agree, if you want really detailed stuff print/buy a dummy13. stikbots have their own style and charm.
@GreenChimken
3 ай бұрын
@SpiderDudeStopmotions I'm not saying stikbots are better. They have two different charms. This is like saying is an apple or an orange is better. Maybe you got confused in it because he said he prefers stikbots himself
@X-Stopmotions
3 ай бұрын
@@GreenChimkenthat wasn’t why I commented that but I read your comment wrong sorry
@IronShorts950
3 ай бұрын
@@josephkashompa2450or a action figure
We're did you get this?
Where do u get it
Where did you get it
Where is the best website i can buy a t13 i want the best quality where do I buy one with the best quality
I was wondering if i should buy 5 for my sibbling and i abd i am seeing reviews
How did you get it?
idc if stickbots are better i just wanna use toys that are fun to play with
Which website?
1:41 the hip piece is normally apart like that so you can remove the top of the hip for more posabillity
Mine came in a silver package and the other ones are in bag I lost the leg
Yo bro what site is that i want to buy
Is it possible to buy it on Temu in the Philippines or can you only buy it from Usa?
@JamesMatthewalfaro
26 күн бұрын
Yes
The big appeal of action figures for me is that I can pose my favorite characters from movies, comics, etc. so why would I want to buy a basic unappealing action figure for 25$ ??
@GooseHamlin
3 ай бұрын
Exactly
@qubek533
3 ай бұрын
When I look at it, the t13 figure looks like a tool for artists. I can't name a single action figure made for specific character to represent biomechanics as realistically as t13. None of them move like that probs, because they're mostly made for display or toying with, t13 is for posing. If you want to draw a position and need such figure, you can pose it and draw a character of your choosing, these figures have amazing representation of how human limbs work and you can make beautiful poses, just look at the thumbnail and a bunch of them in the video, you can also just display them in some absolute fire poses. But wait, did you say $25?!?!?! I am NOT overpaying for a reference for my drawings like that, especially considering they're 3d print quality💀
@Bumblebee421
Ай бұрын
Facts
@TarçinCAT
Ай бұрын
But JUST GIT A KIT ONEthat one is only 2 bucks
If these are 3D printed then is there an original print file somewhere?
@GooseHamlin
2 ай бұрын
Description
So, you can print this with other techniques, making the textures better, you can save costs if you 3d print them locally with someone in your city who does 3d prints you could save money. But now if you see the possibility of this model is phenomenal, way better than wooden mannequins for drawings
how big is it
This might be a bit out there, but I'd love to see you review a 30MM Alto figure, they're actually quite good for animations.
That rod piece is actually a bow staff if you didn't know
its not broken the hip joint if you push down on it will lock back together i have one its a bit odd but it works okay
Bro I order the n13 and it was HORRIBLE I felt so much pain building it my fingers were red but when I was finished it was completely falling a part……..
Nah I got mine for 5 euros i mean they arent that expensive they're nice but mine didnt come with that AK and the halo blade and the swords WERE LIKE SO SMALL. IT WAS EVEN UGLIER THAN A DAGGER. But I still got sticks which look like katanas ig.. But I still liked it for 5 euros ig. It was everywhere not even 10 euros how is yours like 25 dollars. Dollars and Euros dont have so much different am I right?
It’s crazy how the Jada Toys Chester Cheetah figure and the Street Fighter figures are the same price.
If T13 uses 100% of his power would you lose?
I got my Lucky 13 too day for 3 Euro. Ngl it was fun assembling them and they are quite good ngl. At least for me I love them
This can be use for posing practice on sketching.
also i cant put them together cuz of the body (i got them from amazon cuz i dont have a 3D printer
From personal experience parts like the head hands left leg usually popped off more often than the other parts although this could just be an issue of moving it too fast or just buying a bad bot
Im getting mine from amazon.... Is that bad? Will it detonate in my hands?!
@bluefoxgalaxy6057
Ай бұрын
Yes
Honestly i think just making it from a 3d printer is cheaper that's not to mention you could print it from abs and weld the layer lines plus if the parts break you can make new ones
The annoying thing is when it's broken during delivery, they're like, "No biggey, you can just plop it on.) Which is just unprofessional, also they're basically thieves. Also good video, and great channel 👍
I couldn’t find someone actually saying how it poses
I guess the good joints thing is not for mine because mine is so stiff and can barely bend lol I must’ve bought it from a scam thing
I didn’t get one in the box. I got one in a white bubble wrap Ish bag. It’s like whenever a bag or like an envelope had a baby with bubble wrap. By the way I really love it. I got the white one off an AK and yeah, it’s quite nice.
I think the most interesting part about the t-13 is that it’s very clearly made by someone who knows action figures and what makes them good, they’re just held back by being relatively small and relying on 3D printing. I’m sure if they had a higher budget to upgrade the delivery and overall “feel” of them, this would be on level with best AXN or even marvel legends
Bruh I spent $325 on T13 but I haven’t got anything it been 4 months and I got no refund
The TikTok resellers that stole this design from soozafone are probably printing these hastily and without much quality control, so printing it yourself and dialing in the right settings, filament and speed would probably result in a much nicer feeling figure. I'm planning on printing one of these to use as a drawing reference, the poseability is sick
The product from what I can tell is fine, but with the obnoxious, a little misleading, and somewhat harsh ads with that ai voice that will forever make me feel a little pissed off everytime I hear it, you’d think they would at least be marvel legends level quality or something like that, especially at the price. And combined that with the quality control and supposed “rumors” about the people in charge, this is something I don’t think will get much “real” attention from people who actually think about what their looking at. But that’s just me
*Three mistakes, it’s called a dummy 13, the people who advertise it as a “literally anything” 13 are just reselling it. (They also don’t give credit to the OG creator)
@user-sy1bu4ui2o
3 ай бұрын
#Dummy13
@GooseHamlin
3 ай бұрын
Nah two mistakes, watch up to 7:03
Yesterday I bought 2 figures PLUS Shipping from Shopee for RM10.05 and it's not from the Original maker. I'll just have to wait and see how the quality feels like once it arrives😂
Do they only sell it on US?
@Yesiamsirionix
2 ай бұрын
Im from Sri Lanka and i just looked up on Daraz and they have it. Try withdifferent names on different online stores youll find it I WANT ONE CAUSE THEY ARE DAMN COOL and maybe i can use them as reference for drawing. !
The T13’s remind me of Samuel Hayden from doom
Mine hasn’t come in a month 😭
I just could not focus on the video because of the optimus prime in the back. Is it official or third party? But from the parts of the video I seen, I cant see myself buying T13.
@tigerom2827
3 ай бұрын
I think it’s yolopark rise of the beasts Prime
@GooseHamlin
3 ай бұрын
It’s the yolopark Optimus from RotB, it doesn’t transform, but it’s amazingly accurate and has great poseability
@gub_gub18
3 ай бұрын
Ah thanks bud
By the way, 10 out of 10 would recommend I got it on a certain day I forgot and it said it’ll come on on Saturday, but I got it on Thursday. Very good job to the people who were shipping it.
I found one that was 2 figures (white one and red/black demon looking one) for only 12 dollars. This was way too much, especially since I also got red for 12. I got three figures for the same price, like wtf
If u want a another one get the T13 black character because u can have a good( crystal prism) and bad (t13 black)
I own a 3D printer and it is not suppose to be sticky or hard. if its oil is weird because of the texture it is a PLA.
Your packaging was better than mine and it was built already but mine was able to remove easy.
I could probably make a nearly identical model of a t13 even though I have no experience with making models
The sorso part the arms and legs become really loose after a few days
I got my t13 from Amazon for 8.99 and it came the next day after it was ordered and its really good I love it a lot and I know it didn't help the creator but I mean it's cheaper and its the same thing
25$ for a 3d printed action figure is an ok price it’s literally like one of those wooden sketching figure but more joints. I would say it’s ok but personally I like klikbots, stikbots, mega contrux halo and gundam more.
@SaunteringMellows
Ай бұрын
i absolutely adore mega construx halo and Gunplas.
In my opinion stickybones and yes it’s called stickybones are better because it has articulation for all of its fingers and it’s really flexible and I mean really flexible and it’s hands and feet have huge magnets on it so you can stick it to any magnetic surface big enough to hold it
The DUMMY 13 model is not overrated, but TITAN 13 is.
When you said that it’s always the on sale it’s actually not like a month or 2 ago I wanted one and looked at the price and it was significantly higher than the sale price so just wanted to put that out there.
You use scissors or some type of pliers to get the accessories off
Pretty fun to pose And they do know how to make plastic,stikbots rstronger
Bro I love your channel
@GooseHamlin
3 ай бұрын
Merci
Now I can’t wait to make mine
@Batboy_Gaming10
Ай бұрын
I need more filament
My stepdad had a 3-D printer, and I can say that the things it made weren't oily
I don't actually own a t13 but I just own one from a reseller and it's way more smoother and for some reason doesn't include a 13 on the chest and for some reason had a different arsenal of weapons. I do feel bad I'm not supporting the original creator so I'll just pay him once I get the chance
@Kaiju_Turtle
3 ай бұрын
It probably feels different because they used different material to print it. But the original creator is selling the model for free though.
@alingamingd_oldname
3 ай бұрын
@@Kaiju_Turtle yeah you're right, and I only got them cause I don't have a 3d printer
Hey just letting you know their is a staff their you just have to cut the supports off
@GooseHamlin
3 ай бұрын
Instructions or some indication of that would be great
Where did you get yours from
Do you have to build it?
@GooseHamlin
3 ай бұрын
Watch the first like 10 seconds of the video
i paid like 3 bucks on amazon for a pre built copy for 3 bucks im happy for stop motion
Tbh concept of these figures kinda cool but it would be better if they were cheaper and more reliable in terms of materials
I think the accessories were packed on a sprue tree like model kits
What is the difference between All of thos 3d printed t13
But it’s quit good at articulation just not being stuck together isn’t good
Me who has built a 1 Foot tall Mecha out of legos fully articulated and actually has more joints than the T13 because it has posable fingers. _🗣️‼️🔥_
i am planning to get one and i have a dilema what color should i get it
@Animationator1
2 ай бұрын
Red and Blanc aka heavy metal
t13🤝Lego🤝stickbot don't fight,why can't we just be friend?
1:48 the one you holding the fat stick is another weapon tho
Can you pls look at stickybones figures?
@GooseHamlin
2 ай бұрын
I have seen them before yes
@anniemontgomery5784
2 ай бұрын
Could you make a video on them?
@GooseHamlin
2 ай бұрын
Broke
An energy blade thingy????????
@GooseHamlin
3 ай бұрын
I couldn’t remember the exact name but that’s basically what it is
Im buying them online from ali express but if i do get a 3d printer this will be fun to make
Fun fact that big stick with the stuff attached to it, it can be used as a staff yw btw I love ur stikbot videos it might inspire me to get back into stikbots so tysm
@GooseHamlin
3 ай бұрын
I threw that away 😭
@Shizzle_VR
3 ай бұрын
@@GooseHamlin Nooooooo
@Shizzle_VR
3 ай бұрын
@@GooseHamlin i mean if u do get another one just remember my wise words
@Shizzle_VR
3 ай бұрын
@@GooseHamlin also just to let you know that im such big fan
Got mine from eBay. Had to assemble it myself. Watching a KZread assembly video, it took me about an hour. The pelvic joints kinda sucked. Keeps popping apart with minor handling. Wish mine was pre assembled. Where did you buy yours?
why cant klick bot and stck bots and titan 13 stop this war?
@BORIS67887
3 ай бұрын
Сause t3 is shat🤮
@literally_sillyy
3 ай бұрын
the "war" is just so the people behind T13 get better marketing.
You should have got 2 so you could review the interchangeable parts
Does it really matter if it better than stikbot how bout both t13 stikbots are better
Tbh if im picking T13 or stickbots I'd pick both tbh cuz one like is the og and one is the morder Version
2:01 I want one now, THEY HAVE HALO WEAPONS
Huh didn’t know this was licensed by Soozafone. That’s actually neat cause I thought they were just stolen from them and marketed like it’s own thing. I’m with ya I would love a better printed version.
I literally found the same action figure on Alibaba express for about $.50 I’m pretty sure all this guy did was add T13 To the marking and stuff and sell it for 25 bucks
T13 and stikbots are like the same but T13 is much bigger
I also have one every color crystal prism is my most favorite 🎉
Not gonna lie I got a non official one from Temu but it is really good quality and didn’t have half the problems of this one that claims to be the ‘original’
I got 3 on Amazon for like $25 so I got the same price but for three of them Amazon makes everything better and it’s good quality but people can like it for different reasons or they don’t have to like it in my opinion I like it I also like stick bots too they’re both unique and different ways. It makes me like them for different reasons.
@GooseHamlin
3 ай бұрын
Those weren’t official
@Fat_gus_gaming
3 ай бұрын
I bought 21 for 23 bucks dude and it's worth it it's real and everything I can show you guys the website
@Poo_Number2
7 күн бұрын
@@GooseHamlin None of them are official there all stolen exept for the origonal
You know you forgot the staff as an accessory
Bro you got lucky I had to build mine and there were barely any weapons
Hear me out. We 3D Print A giant Stikbot.
Isn't T13's stolen from amazon or somethin? Explains how the quality is made.
@GooseHamlin
3 ай бұрын
I explain the situation in the video