Request a quote from Artisan Electrics here - app.openquote.net/company/artisanelectrics

@homesteadingkosher1005

10 ай бұрын

03:50 it would be a ''gland'' or ''grommet'' to put the data cable through 😆 .... the pi and fan are an interesting and unexpected inclusion, thanks for highlighting!

@artisanelectrics

10 ай бұрын

@@homesteadingkosher1005 new product launch coming on Monday it’s a massive upgrade! Stay tuned for our video 8pm 🕗

This man changes his ev chargers faster than some people change their socks.

@hjeffwallace

3 жыл бұрын

We have 2 EV’s. For 7 years, we have just used the portable EVSE’s that came with the cars. Just a regular 120 volt outlet.

@davidl5546

2 жыл бұрын

@@hjeffwallace this is interesting, that you used the charger that came with the car for so long. I was thinking whether that was feasible since the charger is very low power if I am not mistaken, and charging times will be in the double digit hours?

@Tore_Lund

2 жыл бұрын

@@hjeffwallace Me too, and I park in the street and have the cable out my second floor window!

@arumup5805

2 жыл бұрын

😂

I've had one for about 5 weeks and the quality is great, it was good to see the internals.

That was a really good, informative video. Compare that to the first review you did and it just shows how much time and effort you put into these videos. Keep up the great work!

@artisanelectrics

3 жыл бұрын

Thanks a lot!

Just think somewhere Cory is wrestling with loft insulation 😆.

@lonewolfgeoff

3 жыл бұрын

so right! 😂😂😊

@cjmillsnun

3 жыл бұрын

Nah. He's busy with a can of pringles...

Good to see you scoring the amour wire with a junior hacksaw and then wanging them free - just as I was taught 50+ years ago! If you are using a brass compression gland then just 'wind' the inner sheath at a slight angle in the direction of the 'twist' and the taper part then just slides in. Easy. I used to be able to do these with my eyes shut, I did so many!

Nice design... Cool LED RBG color.. Great simple installed. Thumb up!! Cheer!

Loved the cable tie bag tip. I’m a telecoms installer. Done this for 30 years …. So many noobs slice the top of bag… 😜

i can confirm the reactivness of the support team to all the querys i had before ordering one and modifying my order on the run

I actually build these in my work place, it's so good to see them working and doing such a good job

@metube9541

2 жыл бұрын

DM me if you can do a cash deal on the qt. wink, wink

@nimihazzan26

2 жыл бұрын

That’s so cool, what company do you work for

That looks like a nice unit and would consider fitting one of these..great vid!

I like the idea of rejecting heat, I had this idea long time ago which I mentioned in comments on one of your videos.

Thank you so much for sharing such latest and need of the hour knoweldge.

Another great video, thank you, if all goes well I should have one installed soon.

Be good to see a comparison table of all chargers showing, cost, features and ease of use. Don't know where this compares with the Zapi which I would have thought was your preference

@myenergi

2 жыл бұрын

We are currently pulling this together as it's been requested a few times and there are quite a few differences.

A thousand holes later on the wall of Jordans house.... Interesting engineering using a Pi. Allows for a heck of a lot of possibilities. As an instrumentation guy I I had a chuckle at your comment of a little gadget connector block. I've now ordered an ergostrip.

I’d recommend not placing those grub screws on the paving slabs under your work area, particularly when near pebbles. One inadvertent flick with the cable and those screws could disappear instantly and be very hard to find. I speak from experience. I temporarily store small components in a dedicated screw cap container to keep the safe and easy to find later when required.

Your videos are always factual and informative, this morning it was going to be Zappi all the way but after watching this it will be Hypervolt! Thanks for taking the time to post this :-)

@artisanelectrics

3 жыл бұрын

Thanks I’m glad you enjoyed the video

Do you have a link to the extra long bit holder on your drill?

Good video. I'm looking for an alternative to a Zappi as they are currently on a long back order. My worry, is whether Hypervolt customer service will decrease as demand for their product increases ?

Genuinely interested in buying one, and I need to have an EV charger installed. However, I'll wait for a review that isn't a sponsored advert.

@hypervoltev

3 жыл бұрын

Hmm, in a completely impartial view, this is a pretty solid product and we'd love to help you get one! Just heard it from a friend..

@simonnzd

3 жыл бұрын

Try the Wallbox which also has a raspberry pi computer and an excellent app

@Lewis_Standing

3 жыл бұрын

It's supposed to be declared isn't it if its an ad. Maybe he just got it free from them for this ad. To be fair it does look as good as a zappi and cheaper.

@m1geo

3 жыл бұрын

@@Lewis_Standing it is declared on his video, but not to KZread.

@inarawlinson6107

2 жыл бұрын

@@simonnzd be

Awesome bit of kit! Although will take something special to beat the Zappi! On an off note do you have a link for your safety glasses ?

Jordan, I'd love for you to review a Smappee charger soon. Been installing this brand for a few months now and it can do a lot more than this one (and looks much neater). Keep up the good work. Really like the channel.

@artisanelectrics

3 жыл бұрын

I'll check it out!

Interesting video. Looks a real neat product. 👍🏻👍🏻👍🏻

Hi, when you were charging you left the cable coiled round the charger, I was told by my installer not to do this! I’ve got an Anderson with the 8.5m cable and unravelling the whole lot when I park the car close is a PITA. Do I need to or can I leave the excess wrapped around the charger like you. Many thanks

Nothing worse than dropping cable ties? I’m sure dropping a box of ferrules is worse 🤣

@Jay369

3 жыл бұрын

Or a kick in the nuts.

@captainbackflash

3 жыл бұрын

Dipping a cookie in your tea and loosing half of it in the liquid. Just happened to me!

@acelectricalsecurity

3 жыл бұрын

Try a mixed box of 3000 wood screws while walking across a road, very embarrassing 😂

@muzikman2008

3 жыл бұрын

I dropped my big screw box of assorted screws, beautifully sorted, onto a graveled driveway of a customer, about 3000 screws all needed retrieving from in between the gravel 🤢 I was not impressed, and the customer parks their car there.. Luckily i had a strong magnet...tip of the day lol.

Great video. Morning all. Probably a question that’s been raised and asked before, but is there any safety reason why the charging cable cannot just be left neatly wrapped around the unit, facing down. So basically it’s not held within the holster?

Great video - thanks. That tip about cutting the bag of cable ties in the middle had me facepalming. The number of times I've picked up cable ties off the floor.....

Are there any concerns about having the charger cable dangling rather than plugged into a holder like the Zappi does? Thinking of things like sea air corrosion etc, as we live 1 road back from the seafront in Blackpool so get the prevailing westerly winds blowing in off the Irish Sea. Although the front of the house is facing away from the sea, the windows do still get covered in sea spray during stormy weather.

Question please, do you rate the charger better than the zappi 2? About to get my first charger installed.... Thanks Pete

@hypervoltev

3 жыл бұрын

If it helps, we certainly do!

@phyonics

3 жыл бұрын

I have a zappie 2 and it's great.

Nice install! Wouldn't mind seeing an infra-red test on that Pi's processor. Awsome bit of kit tho!

WOW! a raspberry pi inside?! 😳 BRILLIANT! love rpi's! whack in sd, connect keyb/mouse/hdmi, plug in... BOOM! one fully working mini pc! the whole thing looks ace! loads of them going in methinks!

@MrSnookerballs

3 жыл бұрын

yes and the slower the customer services will take to answer.

Just about to buy a zappi! That is a nice charger . Not fastening the lid of a screw carrier box is a lot funnier.

I'm on my 2nd Raspberry Pi (Pi 4, w/8GB Ram) , I hope yours holds up well, since it is a dedicated use it should, mine not so much...great vid...peace

Great vlog, not an electrician so didn’t understand most of the terminology but very interesting.

The cable-tie tip was great actually. I of course have cable-ties pouring out of the bag.

Another great vid..👍

I've been telling people that tie-wrap trick for years, so so handy!

So good to hear that someone is producing a charger that isn’t hassle. I'm on my second BMW/Mini charger in 6 months but both have given constant error messages and BMW support has been very poor. The Mini Cooper S Electric is brilliant but it’s ruined by its charger.

@hypervoltev

3 жыл бұрын

We'd love to help you out, please get in touch!

@chriswheatley8222

3 жыл бұрын

@@hypervoltev It’s really kind of you to offer help but it looks like I'm saddled with the BMW charger until they either refund or sort it. It’s so annoying that I come home, plug it in and usually get an error message. Eventually it goes and starts to charge, sometimes half an hour later. I've asked BMW for somebody who really knows their stuff to come out but instead they fob me off to the installer. It’s such a shame because we love the Mini Electric, it's so much fun. I live in France, not sure if you’re over here yet ?

Does the charging cable really just hang in mid-air? The dock on the Zappi looks much neater!

@artisanelectrics

3 жыл бұрын

They come with a dock you can fix to the wall but I didn’t want to have it in my case

Nice stuff, easy fix 👍

I'm currently stuck between two chargers either the above hypervolt or the Zappi. We are also having solar and battery installed next month so would want the charger to integrate with both of these. Which would be your recommendation. Many thanks Ross....

Jordan, can you please add a link for the armoured / exterior data cable you use please. Thank you.

My only concern with tethered cables is what happens if there is an issue with the cable itself? I have not had many problems with my home charger over the past four years though it has been upgraded but i have gone through two cables.

I like the fact that there is a pi in there! It would be interesting to modify it so that you control it instead of Hypervolt. Hardwired Ethernet is great too!

La estética del cargador hypervolt esta muy bonito! buen video.

@hypervoltev

3 жыл бұрын

Muchas gracias Keis! Para nosotros es algo muy importante!

Hi, what size of EV ultra cable would you recommend for this charger?

Them hypervolts looks really decorative very interesting but will it be a game changer like zappi chargers

@hypervoltev

3 жыл бұрын

Unbiased view: YES!

@ashleyrawes6253

3 жыл бұрын

@@hypervoltev 👌🏻 You have my vote! It might be time to change my current charger!

@THLighting989

3 жыл бұрын

Good idea

@dti-21

3 жыл бұрын

@@hypervoltev Is it ocpp 1.6 compliant?

@hypervoltev

3 жыл бұрын

​@@dti-21 No, the world's most terrible protocol. We use fully proprietary, to allow for sub 50 millisecond connectivity to our devices. When you watch Jordan update LED Brightness, image that actually goes over AWS. Hypervolt offers everything you need, dashboards, apps, fleet support etc.

Great vid. Quick tech question - can you connect the CT clamp to the consumer tail in the CCU rather than run it to the meter cabinet? Assuming only one CCU in the property of course. Thanks!

@artisanelectrics

2 жыл бұрын

Yeah you can, we do it that way quite often

Sorry Jordan I'm with others who say you should attach a wooden mounting board on the wall if you're going to fit many more. Renting or not respect the wall please. Love the videos and keep 'em coming. Regards Col.

@iainkay3630

3 жыл бұрын

He did say in an earlier video that he had permission to be doing it on the rental.

Because of artisan electrics decided to get one installed. I love it

when you did the alexa bit my alexa said it wasnt sure lol

Any options for the mains cable to be routed behind the unit? So all cables are hidden.

great video and totally agree that customer service is King

Great review mate 👏😎

Its the return of the Swiss cheese brick wall, with new additional holes! You are going to have to get a mason to fix all those holes at some point so the house doesn't fall down! 😁😁👍 I am surprised that they don't have heat sinks on the Pi as it can get very hot as well. Here in Texas we have to have them on ones that are outside to keep them from having issues.

That Wall is going to need a RSJ when Jordan's finished with it 🔨

Watched the entire video...even when located in the U.S. GREAT personable presentation!

Great charger and great video, thanks Jordan!! I'd be playing with the LEDs all day! 😂 How many chargers can you fit to your wall before the bricks crumble away? Maybe you should be in the guiness book of records for the most amount of different chargers fitted to one wall over a period of time.... 😂

Great video, very informative! Seriously considering a hypervolt for my home charging, but I do want to install solar panels and a battery in the near future (especially with the current energy price hike!). What’s your opinion on how easy it would be to set up a solar and battery setup at home with a hypervolt? Is it simple enough or would taking the hit on a Zappi be a better option? Love the hypervolt but need to consider future-proofing. Cheers!

@artisanelectrics

2 жыл бұрын

Thanks! Solar integration is already part of the Hypervolt system now so that will work fine!

@grantjones2232

2 жыл бұрын

@@artisanelectrics What about a battery to store the solar energy or the off peak energy on with Intelligent Octopus for example? I’ve heard a Hypervolt might struggle with this?

@myenergi

2 жыл бұрын

@@grantjones2232 We’d be happy to run you through our feature set and products. 🙏🏼

@manickbarry

2 жыл бұрын

Just had my Zappi installed and couldn’t be happier works great with battery and solar

Love the channel Jordan but why don't you fit a wood patress to that poor wall looks like an aero !!!

@lonewolfgeoff

3 жыл бұрын

mmm brick and mortar flavoured aero... yummy! 😂😂😂

Can cable entry be at the rear of the unit so that cables are not visible?

"Is this the future of electric charging?" No. For three reasons: 1) Any external appliance that needs a fan (with its entry and exit holes, what with insects, dust and other problems), is doomed to failure; 2) Any external appliance that uses an off-the-shelf Raspberry Pi (not designed for the external environment), is doomed to failure; 3) Any OS-driven device (like the Raspberry Pi) is a security nightmare, able to be easily hacked. And with WiFi doubly so... All right, with #3 above there are many (many) mitigations which would ameliorate this. But so many vendors use an out-of-the-box distro with no thought to security that I fear they've done the same thing. And even if they try, the attempt is often a Band-Aid rather than a proper security solution. I'll also say: if they're new, they don't have many customers, so of course their customer service is responsive. Wait until they get a million customers... Finally: I, personally, simply cannot use this charger. My charge point is two floors below me in the underground car space for my apartment. It gets zero Internet. It certainly can't connect to my home Internet with WiFi or hardwired Ethernet, and it's a cellphone blackspot. All of your touted advanced features are useless (much as I'd love to run a rave down there?) Oh, and if it makes sparks it's either high voltage or (very) high current. Low voltage cannot spark unless the current is abnormally high (in which case the metal itself is melting...)

@alexflav23

3 жыл бұрын

Correct, but missing the point, and naturally so, because you get to witness a product at a moment in time. Integrated computing takes longer to deliver, users don't care though. Pis are not there to last, fans are not there to last, they are there to prove a point. On the customer service, we shall see what we do with a million more users. Otherwise all negatives here are not long term features, in fact they are melting before our very eyes. Only the good stuff remains!

@johnadriaan8561

3 жыл бұрын

@@alexflav23 Cool! So that means that you'll be replacing all of your installed first gen chargers, for free, when your next generation product that solves these issues is released? Unlike Jordan, most people install a car charger for years, if not decades. A long-term product that uses items that are "not there to last" is doomed to failure.

@hypervoltev

3 жыл бұрын

​ @John Adriaan Everything we put out is comfortably tested to last 5 years, even with such "non ideal" components. In our whole career of many thousands of chargers, do you know we have only ever replaced one that actually failed? And that was because of a loose connector on a part we buy off the shelf. Sure there's room for much better, but it doesn't mean things are flimsy, they are in fact some of the best around by a country mile. There are other products even further along their vertical integration cycle no doubt(1 or 2 of them), but that won't be true for very long!

Looks like a great product, is there a monthly Subscription? Also Web says “Tariff/scheduled charging mode”, you didn’t mention this. Is this connection to energy provider like Octopus Energy?

@hypervoltev

3 жыл бұрын

Nope, just the product! And yes, you can add your energy tariff and select settings from your energy provider.

How does it compare to the zappi? Does the overvoltage have a ct for solar also like the zappi. I like to be able to monitor my charge rate and have the ability to programme to only charge from solar. Also if you have solar does the unit deduct the cost of the solar supply or does it simply just give a charge value not taking into account solar supply?

Hey Jordan. Get video and nice looking product. At 17:50 you mention setting your tariff rate. I am struggling with chargers that allow a schedule to be set for time of day charging say Octopus Go from 00:30 to 04:30 but only allow one tariff to be entered 5p for this time. However if charged outside this time can only refer to the lower rate even if the rate is 15p. It’s will give an inaccurate indication of charging costs albeit kWh might be correct. Does this charger or others around know allow rates to be applied to different schedules?

@hypervoltev

3 жыл бұрын

Yes @KeithWilson, you can set the rate based on a time of day you'd like to use for it, and you can set as many rates as you like! Soon we will release automated support for Octopus Go, which means you no longer need to do anything.

Blue and white was traditionally line one in POTS (Plain Old Telephone System), so good choice!

I'd be worried about there being a Raspberry Pi inside. Using an off the shelf commercial board gives the appearance of a prototype rather than a full blown commercial one. The Pi already has known overheating issues in regular use let alone in an outdoor unit. The other problem is using an SD card for the operating system. The SD card will wear out and in less than 5 years I would expect there to be a surge of failures related to that. Speaking as a professional firmware consultant I would have recommended using the industrial compute module 3 or 4 or, even better, to use something like a Beaglebone derived design that can be integrated directly onto the main board and use higher temperature spec components.

@sundog486

2 жыл бұрын

Yes I agree with what you've said and it lowers the credibility of the channel. Still his electrical work seems good, though that is not my area of expertise.

@patdbean

10 ай бұрын

​@@sundog486even as pi one (2012) has a 700mhz 32bit CPU. More than enough processing power to run an EV charger. And that is probably a pi 3 or 4

How do you know when it’s done..? Seems the red light should be on when charging then turn to green when done

I know this is a year down the line but my Zappi has failed, annoyingly 6 months after the warranty ended. My energi don’t want to know. In terms of installing, if I got one of these, given I have a Zappi in place at the moment is it safe to assume that fitting a hypervolt would be easier? I’m guessing that all the gubbins for the Zappi already being in place would help?

This thing sounds like a really bad idea... that RasPi has a rather high base power consumption already (somewhere around 10W), so the fan will have to run even in our colder climates, which costs money, is a huge invitation for moisture buildup and for insects/ants/.. nesting inside. For an outdoors device you'd normally want IP54 or better. This thing will need cleaning out and checking for corrosion several times a year (except if you want to replace it regularly..) But hey, it's got a ton of LEDs, so it has to be good.. (and I'm not even getting started about this being cloud connected and the vendor having access to my charging data and possibly others, since the RasPi becomes a regular part of your home network and can be used and abused for anything) Also, an EV charger should not need OTA capability, as there are no regular changes to the charging standards. Updating the firmware on a charger should be a once-every-few-years thing if it doesn't work right when you buy a new car, but that's all. Doing those updates manually via bluetooth is perfectly fine. This thing has a lot of shiny but useless features on its advertising brochure, but fails at the most basic requirements.

@hypervoltev

3 жыл бұрын

Appreciate your comments! We are IP54 rated, and now going for full IP66 in our next version. Baseline consumption is a lot less than 10W fortunately, and there is no moisture build up or space for insects or ants to get in as you say. Firmware updates should never be manual, that's something we'll defend to our grave and one of the biggest problems with other products. OTA is quite crucial actually. It fortunately fails at none of the basic requirements at all, but granted it's hard to please everyone!

@ThePrawlin

3 жыл бұрын

@@hypervoltev I wouldn’t touch an EVSE with auto pushed OTA updates with a ten foot barge pole!....... Who wants suddenly changing behaviour without any warning or my express permission. OTA stream of new bugs provided for free. No way to revert back when it all goes tits up with an update. And please don’t tell me your software is so good it has no bugs..... All software ever produced has bugs. Thats a fact. Also, the fan is not a good feature, it’s negative and a downright liability. The fact that a fan is needed in such a device is indicative of a less than optimal design. The internal dissipation should be so minuscule such that a fan and/or case ventilation is simply not required. The only significant product heating should be when mounted in direct sun and/or high ambient. The components and design should be able to withstand that and maintain reliability in a well designed product. Peter.

Is the cooling fan sucking or blowing? It looks like it's sucking cold air in from the top and blowing it out of the bottom, which doesn't sound ideal what with hot air rising :)

Which ultra EV cable would you recommend for this type of application?

So how much was a total cost in charge

Hi I’m just about to buy a bmw i3s - best charger in your opinion ?. BP pulse is the charger bmw is linked with . Any advice would be appreciated Cheers ian

Your cable nipple is actually a grommet - we old timers used a lot of 'em back in the 1970s 😀

It needs a plug park. And a better way of storing the cord like a compact retractible air hose/extension cord like they have in workshops. Also if the plug was dropped in some dirt or got wet you would want some spray cleaner and a micro fiber cloth to clean it. These would be nice to be at hand in the unit, and could also be sold as consumables for extra revenue and would fit into the wasted space in the housing.

How did this pass IP54 rating? Water spray can clearly ingress into the fan.

@rogerjamespaul5528

2 жыл бұрын

Good point. It should be in doors or enclosed inside a water proof panel with a filtered venting conduit running down the wall for the fan.

Could I use an telephone alarm cable for the signal wire instead of a cate5

9:00 Need something like that. Got 25A main circuit braker and main consumption delinquents are the electric stove, washing mashine, my sons game PC and my Smart Fortwo 451 electric drive. Every time I charge my car and some of the to other appliances is turned on circuit braker makes it's duty.

Hi Jordan, another great video. Shame it doesn't have RCD.

If I already have an ev charger installed, could I get a local spark to swap out my old one for one of these or could I do it myself. I’ve got an EO pro mini 2 with earthing rods.

@MrPhillipgraham

3 жыл бұрын

Please don't do this yourself!

It’s like Blackpool illuminations 😃 I live in Blackpool, love your channel

@artisanelectrics

3 жыл бұрын

😆👍

Is this just for the UK market? or do they have a USA version, or is this an International model for compatible models anywhere?

Looks ace. Can I apply for the OZEV grant if I buy one of these and have it fitted buy an electrician?

It's not the only charger with a PI, the EO mini pro 2 has some kind of PI (I think it's a Pi Zero W). Think there's a couple others that do as well.

Looks like a great charger. What can actually be done with the Rpi by the home owner? Improvements feedback to the product team: have the charge cable finish winding at the top and have a neat position to place the socket. E.g. closer to Andersen A2 design. Also, why not have the house total load setting as a software feature rather than the rotor knob inside

@hayleyxyz

Жыл бұрын

I'd prefer to have physical ways to change settings on the charger. If you do it via app etc., the device will basically end up useless if the company that makes the charger goes bust, or they just choose to not maintain the software after a couple of years.

Great video but all I need from a charger is to charge my car when I want it to do so. The last thing I would want is loads of lights to attract those who might decide the cable is worth pinching

@artisanelectrics

3 жыл бұрын

You can turn the lights off in the app if you want to

Hi there, I’ve been viewing some of your videos relating to domestic EV Charge Points as I am considering purchasing a Tesla Model 3. I am on a tight budget and so I was wondering which charge point you would recommend between a TESLA Gen 3 (£449) or any of the others that you have tested, like the HyperVolt? I’d appreciate your perspective on this.

If the vents are on top, won't this be really a thing with rain/accodantly washing it with a garden hose?🤔

To add to other comment: don’t make your wall look like swiss 🧀 cheese . Maybe add a wood or other decorative panel to wall, and ev chargers to panel, as you can change it or remove it later on. Brilliant! 😆

Er Jordan I think you'll find every EVCP has some computing power inside. It's just properly integrated instead of using a hobbyist computer board, not even using the RPi compute module which is actually designed to be incorporated into other equipment. There is no reason for anything inside an EVCP to get hot enough to need a fan. All the stupid lights tell you everything you need to know - 100% wank. Are you sure it doesn't have internal AC RCD protection? Seems odd that it would have DC and not AC.

@eric4709

3 жыл бұрын

And not only that -a cooling FAN - bound to go wrong , why oh why introduce a mechanical cooling device ? In my experience - installing a cooling fan in a device like this is an after thought.

@therealscags

3 жыл бұрын

@@eric4709 hmm, I wonder why laptops have fans. That too must have been an afterthought.

@hypervoltev

3 жыл бұрын

@mikeselectricstuff On the LEDs your feedback couldn’t be more wrong if you tried, never underestimate the importance of a good clear UX. As an expert user you understand things a bit too well, but for most people it’s simplicity that wins. On the Pi, happy to report it’s going away very fast, a great way to provide wonderful benefits while integrated computing becomes reality.

@hypervoltev

3 жыл бұрын

@@eric4709 Fan adds perfect circular ventilation and keeps things happy for our Middle East customers. It’s true that we never turn it on for this country, and better yet it will get removed in our next iteration!

@hypervoltev

3 жыл бұрын

@mikeselectricstuff The pi is not the thing to focus on really. The fact that every other charger requires 25 buttons for a firmware upgrade is the real caveat! So while you are technically right, in terms of user experience for our users that don’t want to care about details, it’s worth seeing things a bit more holistically. Do people care about what kind of computing they get, or do they care about an effortless experience?

Big brother is watching you... What happens if they go bust does it work without the app? It does look good though and RPI always a bonus

@benedwards9426

3 жыл бұрын

The charger will function just fine irrespective of whether it has any connectivity or not.

The Hypervolt says faster charging? I cannot see anything about how may kW eg 7.2, 11kw, 22kw? If it is 7.2kw that is standard charging for single phase domestic bit some domestic have 3 phase

lol! Your enthusiasm for leds is a bad as mine, I too love a good led display. Zappi still leads the field in terms of ease of installation in my opinion, no need for an external RCD. Also, rear or bottom cable entry options.

@hypervoltev

3 жыл бұрын

Internal RCD being released in just under 2 months fortunately, removing the last interesting thing Zappi does that we don’t yet. No worries, on it!

@cbcdesign001

3 жыл бұрын

@@hypervoltev That's great, the easier they are to install the better. I like your display by the way, I am as sucker for RGB lighting.

@hypervoltev

3 жыл бұрын

@@cbcdesign001 You will be pleased to know the LEDs are also vastly improving in the next product iteration to much higher density!

@heladas90

3 жыл бұрын

Check out the Sync EV

@mickbitchum4664

3 жыл бұрын

@@hypervoltev I prefer them without internal A-type RCDs! Then if cables are buried in the wall you don't have two RCDs in-line.

Hello 👋 really great insulation i am new to the channel and all your videos are really helpful as in September this year i will be starting my new journey on becoming an electrician starting level 2 diploma in electrical installation i really cant wait to get started. I would like to come to a few of your installs. can I give you a little tip you should have blank out your number plate on your car as you never know who will get your details.

Dose it work with the octopus agile tariff? so you can say only charge when the price is below x pence?

@bcjf01

3 жыл бұрын

Going to guess NO as there is no reply !!

Which makes would you recommend, Hypervolt or Zappi?

Another excellent video.

Is there a Hypervolt IPO coming up soon? ;) Love the glowing review.

@hypervoltev

3 жыл бұрын

2030! Hold on tight, we're on it!

@ZephenHD

3 жыл бұрын

@@hypervoltev Oh hey guys! Keep me updated! 😂