So far so good, I have found a few problems but nothing too scary for the price, if you are interested in one let me know, I got the hook up.

@donanderson5520

Жыл бұрын

I'm interested just waiting on your final review

@RightNowPowderCoating

Жыл бұрын

@@donanderson5520 Should be up Sunday!

@RightNowPowderCoating

Жыл бұрын

@Steven Chant Should have final review up Sunday.

@greatwhitenorth9159

Жыл бұрын

Definitely Interested, not sure how to msg you directly though?

@RightNowPowderCoating

Жыл бұрын

@@greatwhitenorth9159 you can email me, dan@rightnowpowdercoating.com

Hy! A long Time ago i see Your videos. I have the Same machine,And this is my first machine. Im happy with your first impressions, and wait for the full video! At europe every day they are going to more favourite. Thanks for the videos! I learn a lot about them! 😊

Best of the world. Electron is the best decision in terms of price and performance. It sells all over the world, leaving many of its competitors behind. The most important thing is customer satisfaction. After the sale, the interest continues.

With the last setting you can adjust the brightness of the finished coating.

Best for Best!

@nrcardoso86

Жыл бұрын

Uso o vosso produto á cerca de meio ano e estou satisfeito. Muito parecido com a gema. No início estava com dúvidas mas foi uma boa escolha para o orçamento que tínhamos

Thanks for sharing , It looked like the powder fog was a little wider than normal , is that was that what you were mentioning with the PSI? Do they not offer end cone tips that can grab more focus and less wasted powder?

@RightNowPowderCoating

Жыл бұрын

It does come with a cone tip also. You can also turn air down to control powder cloud. I like to spray fast, don't care as much about wasted powder.

Eu uso Electron na minha linha automática e gosto. Os criadores da Electron são antigos engenheiros da gema se não estou errado.

I'm watching this closely Dan think of buy one waiting for the full week of use review

@RightNowPowderCoating

Жыл бұрын

I dont think you are alone! Hope by Sunday, we have 2 full shifts on it now and want to finish out the week!

I have the EZ 50 powder coating gun with the cup attachment on the bottom of the gun it goes up to 80 KV and I’m having some issues with getting full coverage on some things. Since I can’t adjust microamps what’s the best way of getting the best coverage on things. My ground is an 8 foot grounding rod right outside my spray booth. And I attach the ground to the actual piece itself instead of on the cart or my parts hang. Any advice would be much appreciate it love your videos I learn a lot from your videos. Keep up the awesome videos

@RightNowPowderCoating

Жыл бұрын

I dont know those guns and with out much info on parts it's hard to say. Maybe drop ur kv and see how it does. Can also play with gun to part distance.

@tomwhitt4621

Жыл бұрын

@@RightNowPowderCoating thank you

@stridracing9446

Жыл бұрын

@@tomwhitt4621 8 foot grounding rod is not enough if you dont have very wet ground. If you have put the rod through the floor of your buildning it does not give good ground unless you put a good deal of water down the hole. You also need to connect your ground cable from your gun to the same ground you use for your parts. The gun you use I doubt give you the actual output as the numbers you set. kV is not interesting unless you can adjust uA (microamps). By only changing kV you dont do much difference for how the powder will apply to your parts. Your gun is more of a toy than a actual powdercoating gun. But to get the most out of your gun you must ensure good ground for parts and gun, they must share the same ground for best performance.

Hey Dan, long time subscriber and valiant weekend warrior. How much $,$$$ do one of these cost? Specifics appreciated. For me, barebones model with no features or extras. I highly suspect this grade equipment is way in over my head. 😞 how will i ever get started powder coating at home? I don't think the stupid little eastwood PCS250 will achieve what I've long been preparing for, which is the 3 tone rim finish as well as primer and clear coat making for 5 coats. You've answered my questions before, but now I'm slightly older (23) and have more money at my disposal. When i called greensolv and they helped me crunch the numbers and conclude it would be thousands (5-10K) of dollars for the chemical plus a tank and heat element, etc etc, i became perpetually discouraged, but my hope is not all lost yet.

@RightNowPowderCoating

Жыл бұрын

Hey, we have a few options, please email me at info@powderfinishingequipment.com and I will get you more info and prices.

This is very good timing for me, however I am Canadian. There isn't a whole lot of great options available around me aside from of ordering directly from the manufacturer. Or an EastWood for $260 in the city lol. I am more than okay with paying more for a quality product though. I fully expect it would cost an arm and both legs for shipping, as all things do here lol

@RightNowPowderCoating

Жыл бұрын

Not sure to Canada, we are selling them for 3500 usd and can ship direct to you. You can email me at dan@rightnowpowdercoating.com for more info.

@RightNowPowderCoating

Жыл бұрын

Sounds like 3500 will be final cost delivered, thats with shipping and customs.

@NoblePineapples

Жыл бұрын

@@RightNowPowderCoating Oh my god that is a lot less than I expected, but it is fantastic to hear. Thank you so much! Am also waiting for the final review from your guys as well but I'm thinking likely sometime in the near future I will be reaching out. Just need to sort out the other important stuff as well lol.

@RightNowPowderCoating

Жыл бұрын

@@NoblePineapples There are a lot of people waiting haha, its nuts how many messages and emails I have got about waiting for the final review. should be up sunday.

👍

show the guts of the control box

Does it have powerboost like the opti pro B, 110kv

@RightNowPowderCoating

Жыл бұрын

It does not, to be honest though I dont ever use the power boost on my opti pros

How do I go about getting a price and getting one ordered

@RightNowPowderCoating

Жыл бұрын

Email me at dan@rightnowpowdercoating.com

How is their customer service and warranty/service repair?

@RightNowPowderCoating

Жыл бұрын

They offer 2 year warranty and tell me they are avail 24/7 via whatsapp. Since they are not set up here it's best to have spare parts in hand. They are testing the market and if it goes well we might team with them to support the USA.

@Wilford100

Жыл бұрын

Fantastic, unbeatable! All thought we don’t have many issues. Over 400 sold by us

@rjthomasindyusa

Жыл бұрын

@@Wilford100 Do you sell them stateside? Parts?

Did you stop doing wheels?

@RightNowPowderCoating

Жыл бұрын

Nope, we still do them.

Would have to be something special to move me away from my wagner sprint

Man...Eastwood powder coat gun I've used just as good, don't need all of this... its putting me to sleep

@24dodgecummins1

Жыл бұрын

Diy or pcs1000?

your link to EZ50 doesn't work,just tried to see price

@RightNowPowderCoating

Жыл бұрын

Yeah those are old I probably need to check em all

made in Gina

@loczero7727

5 ай бұрын

made in turkey

Why don't you help a brother out and send me that gun you no longer use, I would really appreciate the help.

That looks much more expensive than the Eastwood or Harbor Freight models. Maybe label your video with the intended purpose......commercial use or something.