Thanks! As always, a great unbiased review. I feel that it's a "You get what you pay for" crawler.

@RCTNT

Жыл бұрын

Quite right. Thanks for the support!

@Noizy-Boy

Жыл бұрын

@RC-TNT Anytime! Your channel and this hobby have really helped me with my Bi-polar condition. You are such a positive person! 💛 Keep up the good work!

@RCTNT

Жыл бұрын

Thanks for letting me know it's been helpful. I appreciate it very much. Be well.

I got one of these used for $40. Most of the drivetrain parts are interchangeable with the redcat gen7, so I was able to put metal lockers and transmission gears. All it needed to run was a new driveshaft, redcat everest 10 was a direct bolt on. Not a bad truck for the price.

@RCTNT

Жыл бұрын

Good to know! Thanks

@IowaBudgetRCBashers

Жыл бұрын

I thought it looked like a gen7 clone

@BudgetRC_Channel

Жыл бұрын

@@IowaBudgetRCBashers it basically is. HSP is who manufactures the Gen 7 for Redcat, and most of the parts on the Gen 7 were unchanged from previous HSP designs. These parts have been around for years. Rather than buy Redcat parts, you can get most of them much cheaper by looking up the HSP part number. For the metal lockers, look up "hsp 180009". The Gen 7 Pro front CVD axles should work on this truck too, which will help improve steering.

@barceloni1984

10 ай бұрын

​@@IowaBudgetRCBashersdifferent chassis rails. And a lot of minor differences to things, but any parts that would need replaced to keep it going can be found in a redcat gen 7 or Everest 10

I really enjoy your videos, glad i stumbled onto it. Cheers!!

@RCTNT

Жыл бұрын

Glad you like them! Thanks and welcome :)

My first RC car was a HSP, a 1/10th buggy 4x4, I bashed the heaven out of it, plastics are sturdy and held their shape but super flexible

@RCTNT

6 ай бұрын

Awesome. Even cheaper RC's are amazing for what you pay these days. That's great 😊

The HSP Boxer and Exceed Max Volt are Great for the Money , They are like the Remo Hobby 1093st , Thanks for Reviewing !

@RCTNT

Жыл бұрын

No worries and thanks for the extra info - that's how I learn about some of these more obscure vehicles! Cheers :)

It certainly has a very similar look with regards the chassis to the FTX Outback 2/ 3

I look forward to the improvements 👍👍👍

That’s me guys!!!

Another great video mate. I had been curious about this one for a while now, I have several HSP bashers and nitro cars in my collection and all have been a lacking a little in the quality department and have spent more time on the shelf than being driven because they seem to cut cost's in a lot of the wrong places. It's a shame, because some of them could be really good entry level cars if, like you said, they spent that little bit more money when producing them. I just haven't been able to justify the time and money finding compatible parts and fixing the issues they have when I've got a lot nicer stuff from Axial, FMS, Team associated and Traxxas for not a huge amount more (Being a pensioner I usually hold off until I see them on sale for at least 40-50% off) and all those brands have way better/much more readily available aftermarket parts

@RCTNT

Жыл бұрын

Understandable. I think there is a path to greatness for most of these cheaper models. I'm hoping it isn't a long and expensive path for this model in particular. If it isn't raining again today, I'm hoping to find out!

Great episode! Just found your channel love it 👏👏👏

@RCTNT

9 ай бұрын

Heh thank you and welcome 😊

From what I remember, HSP, RGT and FTX all have similar cars, depending where in the world you are. There was a really nice car they made a couple of years ago, called the Pangolin. That's was very similar to the FTX Mauler, but had 4ws, straight from the box. The controller is also the same as the older FTX models, and the tread on the tyres appears to be the same as the Mauler. The steering issue is exactly the same as the Mauler, and you'll get a few more degrees by shaving down the steering stops. The Remo Hobby Axial Honcho and Deadbolt clones were really good, and the chassis's were again, very similar to the HSP, RGT and FTX cars. And the Paso is an awesome little car!! Just received the Hyrax clone tyres and put them on a set of alloy beadlocks, and it made such a difference. Good to see some of the cheaper models getting some exposure. 👍🏻

@Molekulasti

Жыл бұрын

HSP is an OEM of all these cheapies. FTX is just peddling cheap chinese stuff with a premium. It's just not worth it to try and save pennies on these things. After couple of chinese off brands and spending too much time and money to make them usable I realised that Traxxas/Arrma/Element price is more than justified. These cars are trash.

@RCTNT

Жыл бұрын

The Paso is great, yes. I believe we did a video on that, but by a different name.

@RCTNT

Жыл бұрын

I think you're right there, yeah.

@roblowrie1969

Жыл бұрын

@@RCTNT the RGT136100, if I remember correctly. 👍🏻

Thats definitely a rebranded RGT 136100. I had one and gave it to a buddy. Servo stripped out instantly and replacement ones stalled all the time. Replaced the ESC with a used 1060 I had sitting around and added weighted beadlocks with knockoff super swampers then it was a formidable crawler. ESC fixed the stall issue and the aftermarket servos gave me much more steering angle. Front diff stripped out twice where the driveshaft went in. Finally found a Redcat all metal diff that fit perfectly.

@RCTNT

Жыл бұрын

It's similar to the 136100 V2, but not identical. We have got a review of that here on the channel and it actually crawled better than this thing! I'll have to compare them side by side next video, thanks for the info.

@FeralRC

Жыл бұрын

@@RCTNT had me fooled! I actually looked back at my order from Banggood and the title is "HSP RGT 136100." Of course the titles are commonly jibberish. Mine was a Defender body that was nearly the same shape and size as that Jeep body. I'll have to look back at your review.

@RCTNT

Жыл бұрын

You've got me wanting to take a closer look at both together, too. For sure they're similar, but there are differences. The steering is mechanically inhibited on this one, for example, while the 136100 has more throw without needing to cut plastic or change screw locations, etc. I'll look closely at em both anyway. Interesting!

@techspeedrc

Жыл бұрын

RGT is a brand owned by HSP. They used to use RGT as their high spec race brand about 10 years ago, after pulling out of the racing market they repurposed the brand for their crawler range.

@RCTNT

Жыл бұрын

Thanks for the info, I did not know that!

Thank you

The biggest selling crawlers in the UK are the FTX Outback range, which are mainly rebranded HSP/RGT crawlers. Easy to see why when they are a third for the price of a RTR TRX4. For something cheap that performs well try and find the FS Racing crawler, also known as the Reely Free Men. It bears a more than passing resemblance to an SCX10II, which might be because FS Racing is an OEM manufacturer for Axial and Arrma.

@RCTNT

Жыл бұрын

You're a well of info. Thank you for this! I'll look into it.

Reminds me like a bigger version of the 13860* RGT but without the charming size and body. Rather than [only] a pinion, I'd go straight for a 5-slot highest turns motor I could slap in it.

@RCTNT

Жыл бұрын

I may have to do that anyway, depending on motor shaft size and what pinions I have here!

Cheap prices doesn't necessarily mean cheap performance, most of the price of our trucks comes from developpement and advertising costs ... however you have to be more carefulll and choose wisely. A few years ago, here in Europe we could get a rebranded SCX10.2 for half the price of Axial's (also sold in other parts of the world under RCX and.another brand I can't remember yet) ... sure there were some cost-cuttings, like "philips" screw that were pretty prone to rust, and metal shielded bearings (though still better than unprotected bearings), rebranded WP1040, a different Cherokee body and maybe a few holes here and there that weren't exactly were they were supposed to be on the rails ... but it performed as well as a SCX10.2 and you could even upgrade it with the same hop-ups (except axles covers, they used larger bearings for the diff). Unfortunately it phased out last year, now it's only available with portals ... yes, AR44 with portals without the wider stance associated with portals, with a G500 body, for less than US$250 ... and for $120 more you can even get it as an updated 6x6 UMG10 (full length chassis rails, 2-part 3rd driveshaft, rear inner-fenders acting more or less as brace) with portals and lets face it, a realist but pretty ugly body (search for Bureko 6x6 but you've been warned) ... both with a 4-ch radio with one on-off-on and lighting ... Sure the portal gears from the RTRs are filmsy, maybe they broke a bit more than others portal gears, but hardened ones are available for cheap and with little work, you can even use gears for Capra.

@Andrew_Red

Жыл бұрын

that's the Reely Freeman 10.2 rebrand. I have one and it's still going well :)

@TuxStang

Жыл бұрын

@@Andrew_Red yep, best bang for the buck ever ... too bad they dropped it for the 2.0 with its portals.

Great video man. Looking at those axles those look to me exactly like a redcat E10. Try those steering hacks out like chub screw moved to backside of the axle. Those helped a lot with my e10. Transmission looks like redcat also

@LibraryMercenary

Жыл бұрын

It is largely redcat. The Gen7 portal axles are a direct fit. With that kit (including spur and pinion) and a better TX/RX it is a perfectly serviceable crawler.

@RCTNT

Жыл бұрын

Thanks guys, helpful info.

@techspeedrc

Жыл бұрын

HSP is the oem manufacturer that made the E10 and Gen7 cars for Redcat, as well as many other Redcat cars. So the same steering fixes for the Redcat works for the HSP Boxer. Cut the stops off the steering knuckles, countersink the screws holding the C hubs on the axles and put a bend in the steering link to clear the diff.

@RCTNT

Жыл бұрын

Thanks, good info. I fixed it yesterday and will show what I've done next video :) They're fine axles from a strength perspective, but yes that steering design was pretty woeful!

the axles on this thing are similar if not the same exact ones on the redcat Everest10.

The turning radius ruled this one out for me I ain't making gates with that lol

@RCTNT

11 ай бұрын

Truth.

It is certainly getting harder and harder to tell where to draw that line. Sometimes the Chinese brands are incredibly cheap and seem too good to be true. I often look at the Chinese market prices on Taobao as my guide. If you see the prices of Cross-RC trucks in China for example, that is a good guide. It is amazing how low the prices are on those but even accounting for the price of shipping they are still a great deal. My cheapest buys to date have been a FeiYue buggy and a HengGuan truck. In both cases I was prepared for the worst but my expectations were exceeded. I have also been looking recently at the Austar AXX4 which seems to be a great product for the price.

@RCTNT

Жыл бұрын

Agreed on all points. The choices made with components make all the difference. If they'd gone with lower gearing and a different front axle I think this would have been a different video!

Well, to make this one a normal rig you will need to spend some money. So I'd recommend to add that money and buy some RGT or FMS model

The steering can be increased by the front adjustable axis, you adjust for the wheels open. The first thing you can do is change this poor wheels and tires 😁. This chassis is very light weight, you can add more weight on wheels and chassis. Motor and a small pinion will be a good one upgrade. Basically it’s a SCX10 one (maybe two) clone, and the upgrades needle will be the same.

@RCTNT

Жыл бұрын

I'm with you on the weight and wheels but not on the comparison to scx10. It might look similar but it really isn't. The steering in particular is so much worse. I overhauled the rig yesterday, so l'll share how I fixed everything soon. I'm itching to see how well it goes now it's been modified!

Well we are definitely spoiled with how good most RC grade Crawlers are. I think this RC is worth the $ for the right person. Who that person is is questionable it’s to fast for a kid & not worth putting to much $ into it. I bet the right beginner would have a blast with it. That’s why I like your channel you review a wide range of RC’s. I don’t believe I’ve seen anything on the New Gen 9 hopefully you’ll test it. No pun intended I’m kind of on the rocks with buying it.

@RCTNT

Жыл бұрын

I have the Gen 9 here finally It's raining now but I'll be testing it as soon as I have a clear day here :)

Well. That was unexpectedly disappointing. Seems like it didn't even perform as well as the RGT EX136100 RC4 V2, which to my untrained eye seems very similar. I see other commenters saw the same similarities. One would expect them to perform similarly as well.... and here we are. NOPE. With your clear and honest review in hand, I can't see any justification to get this if the EX136100 RC4 V2 is still available. That one costs less and can do more. No brainer. Makes me glad we already have the EX136100 for the kids. Probably going to have to get several more as we keep adding kids to the herd. Anyway, another stellar video as always. Thank you for the excellent work, it has once again been a genuine pleasure to share your thoughts and experiences. See you on the next one.

@RCTNT

Жыл бұрын

Heh, thank you. Glad it was helpful. (Out of interest, while I was modding this for the next video, I tried fitting the sliders you made for the 136100 V2 but the holes didn't align).

@elduderinolebowski5411

Жыл бұрын

@@RCTNT yeah there's a slight bend required, if I remember right, made possible by them being TPU. I'll take a picture of ours and send it to you.

@elduderinolebowski5411

Жыл бұрын

@@RCTNT What's kind of funny is, untill you said this, I had totally forgotten about that. I put those on there so long ago, and haven't looked at them since I put them on (they just work, nothing to look at), that I forgot the holes are a little bit off. I will fix that in the model files and send those to you.

@RCTNT

Жыл бұрын

Holes don't line up with the HSP - not a complaint at all about your work! Just noting it isn't the same as the 136100 V2 :)

@elduderinolebowski5411

Жыл бұрын

@@RCTNT OH! I thought you had noticed the slight misalignment on the 136100V2. Because, there is one, and I forgot about it. But yeah, I guess that's another point of just how different the two of these actually are, despite the obvious similarities.

I'd be very interested in your opinion of the HB r1001, I was able to get it for $235 on sale. So far it has been impressive, all metal gears aside from spur, can be upgraded to have open/locked diff control like a trx4.

@RCTNT

8 ай бұрын

From a feature perspective, it's a trx4 sport clone with 2021 Bronco body, 2 speed and light kit. IP theft notwithstanding, it looks like great value. Interesting.

@keldonator

8 ай бұрын

@@RCTNT I've found some parts are interchangeable but not all. It's biggest flaw is the motor mount when using an aftermarket motor is loose, easily remedied but still.

@RCTNT

8 ай бұрын

Comes with the territory of a cloned model, I expect.

I have a hsp as whell, but with h2 body, have put shock keyes as well 120mm Shock absorbers on mine, so have exactly the same ground clearance as the original, but with much more flex, i really love mine :D

@RCTNT

Жыл бұрын

Hey that's cool, I'm glad you're enjoying it! I got my axle replacements right here so it'll drive again soon.

@RatBoraFTW

Жыл бұрын

@@RCTNT Thinking about upgrading my axels, but what suits these hsp? :D omg please film when it is whole again :D sry for my bad english xD, using translator 😇

@RCTNT

Жыл бұрын

I didn't notice you were using translation. Excellent. Axles that fit the Redcat Gen7 should fit this, but there is no guarantee. I just bought the original ones again, for now.

@RatBoraFTW

Жыл бұрын

@@RCTNT Okey😀, too bad I scrapped my gen 7 Pro :/, otherwise I would have had portal axels :/. Original axels work to 😀😀

@RCTNT

Жыл бұрын

It's probably happier on straight axles anyway. Better center of gravity!

I kinda want the PG4 dually kit... so nice.

@RCTNT

Жыл бұрын

Oh boy, yeah! I missed that when I bought this. Would have definitely gotten that instead. What a beauty!

Where and how do you think the "bing brands" RC models are made? In the same place as that one, also the materials are similar. Cheap doesn't means bad same as expensive doesn't means good. The design is what makes the difference, sometimes... But most fanboys can't see beyond those too facts.

@RCTNT

Жыл бұрын

That's a decent approximation of the subtext of this video, nicely summarised. Design choices are key and in this case, we found out that performance can be hampered by budget-driven compromise. Thankfully, fixing the thing for better performance doesn't have to be expensive. I'm looking forward to the next video in this series, as I've made the changes already and now need to test them. Looking forward to seeing what difference is delivered by some cuts, holes and parts. Indeed, that's not a bad idea for a video: RC brand genealogy and family tree. Thanks for the idea, I think that could be quite interesting. Cheers

I can’t find em for sale in the us but I want one

@RCTNT

Жыл бұрын

I just sunk 4 hours into it today. Looking forward to testing it on the 6 problems again tomorrow. I reckon we'll get a few out now. That said, you're not missing a lot with this one. It's cheap but any other cheap one for similar money is probably similar in performance.

I would like to see RGT EX86100PRO V2 (ROCK CRUISER PRO V2 KIT) review from you.

@RCTNT

Жыл бұрын

A few have asked for that one now. It's on the list!

A redcat gen 7 pro would be a better starter rig for sure

@RCTNT

Жыл бұрын

Absolutely, yes.

tested the bugget crawler at the rough trail.. fair enough..

@RCTNT

3 ай бұрын

They all get tested the same. That's how we find their strengths and weaknesses.

@arwana692

3 ай бұрын

@@RCTNT good point

🖐😁 Nice sharing my friend 👏 👍

@RCTNT

Жыл бұрын

Thank you 🙂

Yep, smaller pinion gear, sought out steering, & maybe decent oil adjustable shocks, I noticed shocks were not adjustable, & maybe just change front axle for steering,tyres are ok 😉 😁👍, my reely freeman crawler, covert scx10ii, 😝😝 is awesome, I only paid £180 for it ,I have put smaller pinion gear 13t 48dp on 17 turn 540 motor ,which never given any problems from new, put in original scx10ii back diff, & original scx10ii transmission,which go in perfectly ,17.5 kg servo hd one, she now running with ftx geo/ rgt desert fox wheels n tyres, awesome , crawls over anything, 😉 😁👍 oh & original scx10ii slips clutch lol 😁👍, shocks too, original ones greeked alot,irritating 😱😱🤣🤣

@RCTNT

Жыл бұрын

Sounds pretty nicely sorted :)

Hey mate of topic question do you know much about tanks? Heng long in particular

@RCTNT

Жыл бұрын

I don't, sorry! Never had one. Have heard of that brand but that's about it!

@blitzrc4713

Жыл бұрын

@@RCTNT there great fun super scale got mine for 240 AUD whereas a tamiya is thousands I mucked up rewiring the remote and blew it up having trouble getting the gun working again I recommend trying one! Pity this crawler didn't hit the mark love the cheap underdog RC s

@RCTNT

Жыл бұрын

I see, that's interesting. My wallet is giving you the side eye but I'm glad you mentioned it, I'll have a look at them :)

@blitzrc4713

Жыл бұрын

@@RCTNT worth the smiles for the miles my friend also fun as a builder because they have model details. I have a challenger 2.british /Australian tank

Redcat Gen 7 would give a it run for its money in the poor steering stakes.

@RCTNT

Жыл бұрын

Really? I hadn't realised how bad that was. And what an improvement the Gen8 must have seemed.

Can you do a review of the cheap enduro se utron

@RCTNT

Жыл бұрын

Planning on it, once it's available here, yep

@mauriciodelvalle4648

Жыл бұрын

@@RCTNT great thanks.. maybe compare that with the knightrunner.. I'm not sure if you have it...

@RCTNT

Жыл бұрын

Will do, yep! Review: kzread.info/dash/bejne/l4BpqtGvmte2hNI.html Upgrades: kzread.info/dash/bejne/dKSEq69yn7fOacY.html

I enjoy modding vheap crawlers

@RCTNT

Жыл бұрын

Me too :) I've just uploaded the next video for this rig, it'll publish early July.

What's your video any different any hundred other videos out there on this truck?

@RCTNT

6 ай бұрын

My video is every bit as special as your thoughtful comment here - it's your take on things. Just like this video is mine. And, since I'm a nationally-ranked competitive driver in this class of vehicle, hopefully my opinions have some utility for people. And also of course, my obstacle course here, the '6-Problems', is something that I've used to test most crawlers on the market. So now my channel gives you a useful idea of capability compared to most others from the big brands. So here, you can see what it's like on the rocks compared to all the others. I bought this with my own money so opinions about the car are hopefully as unbiased as possible. That's the aim - even for sponsored videos on the channel, my condition of accepting a car for review is that I'll give my full and honest opinion. That's not negotiable. That's why my video is different to any hundreds of others out there on this truck - not that I'm aware of any of them. I make a point of not watching other reviews as I want my thoughts to be fresh and genuine. Hope it was helpful, that's the goal. Cheers

I'm not enjoying today's rc activities. Gotta wait til payday to order my first crawler. Grabbing an scx10.3

@RCTNT

11 ай бұрын

Solid choice, you'll love it.

Neat

I would put bigger tires on it and make it a monster truck

@RCTNT

Жыл бұрын

That would definitely snap those cheesy front axles faster than I managed in the next video! Fun tho!

Is this the new version of the Gen 7? Lol

@RCTNT

Жыл бұрын

I'm just learning from a few of you guys today how much this apparently resembles that car! I hadn't realised. Fixing the steering now. Much better already, thankfully!

@Daithlee

Жыл бұрын

@RC-TNT Yeah, as soon as you got to talking about the price point, my ears perked up...as soon as you said the steering was bad, I saw a redcat in disguise. To be fair, after some work, my Gen7 Pro is a mountain goat.

@RCTNT

Жыл бұрын

Gotcha! I guess most crawlers can be made to perform, though the effort and money required varies! I reckon I'll have this thing purring without too much pain - hopefully!

Oh no i definitely pass to expensive for cheap stuff 😢

@RCTNT

3 ай бұрын

Cheap isn't always cheap, this is true!

@arni7810

3 ай бұрын

@@RCTNT lol not even the doors open..

@RCTNT

3 ай бұрын

They usually don't, on polycarbonate bodies, even expensive ones.

@arni7810

3 ай бұрын

@@RCTNT ok

OLD Flysky controller.

@RCTNT

Жыл бұрын

Yes indeed. Very.

I got one and with a few mods it's a really good trail truck

@RCTNT

Жыл бұрын

I can believe it. I've done my upgrades now amd filmed the follow up. It's a lot more capable!

@jameswisecarver

Жыл бұрын

@@RCTNT anxious to see it!!

@RCTNT

Жыл бұрын

I have a few videos scheduled ahead of it. Editing now. Will probably publish early July, FYI. Thanks for your support!

Nice Review my Friend! For €$180/200 maybe more €$ 250/270 and a RGT EX86010 is a lot better?

@RCTNT

Жыл бұрын

I can't speak to the performance of the EX86010 as I haven't tested it, but it does look like a much higher quality machine, yes!

@pandacrawler6x6

Жыл бұрын

@@RCTNT Is almost the same Chassis of the RGT EX86110 you already test but in a more short (only a little) wheelbase.

@RCTNT

Жыл бұрын

Yes, it looks very similar. That being the case I'd expect it's quite good!

@pandacrawler6x6

Жыл бұрын

@@RCTNT Yhap, a very capable and Cheap RC, i have one (well is my Wife RC) and from start shows a very capable and Fun RC and after a simple mods and up-grades (Wheels brass and Tires) start to challenging the TRX6 HéHéHé!!!

@RCTNT

Жыл бұрын

That's a big claim! I might have to look at one of these and see for myself!