This was one of the prettiest 600's I've seen. The owner did a super killer job. Love all the carbon and color combination. 😍

@TeamMooreMafia

Жыл бұрын

I thought the same thing!

@DukeofLeicester

Жыл бұрын

Thanks, she’s a stunner for sure. Love her more every time I look at her. Can’t get enough of the Kawi’s, although I gotta say I’d love to add a minty Gsxr-1000R to the garage.

@M16xDr0pSh0tz

Жыл бұрын

It looks stock lol

@thesolorider3446

Жыл бұрын

No😂

This is why I watch MM. To figure out what mods are worth the money. 😁

@JamieS1992

Жыл бұрын

which makes me sad that we dont really get to see 300cc videos would be nice to see what R3's do on his dyno mine does 40hp on my mechanics so wouldnt mind seeing how a few do on his

My old 2013 ZX6R made 115hp with just a Leo Vince can,after I cut out the cat and put a new piece of pipe in and then fitted a PC5 and K&N it made 121.75 hp and a gain of 10hp through the midrange. The cost was quite low.

And just like that Moore mafia put another killer on the streets. Chris has to be one of the best if not the best in the states at tuning bikes hands down my favorite rider /tuner 👌

Bought this bike 3 months ago and still going strong. Definitely a fast bike for sure! Previous owner and Chris did a great job!

Thanks again for the tune, Chris! It was a pleasure coming down to visit y’all. As for the dirty six, she’s loving the tune as much as I am! That Brock’s full exhaust makes her scream so good

@cheddardavis5818

Жыл бұрын

Did you get your tires balanced yet lol

@DukeofLeicester

Жыл бұрын

@@cheddardavis5818 Please tell me you’re being facetious.

@cbr1928

Жыл бұрын

@@cheddardavis5818 it's the chain buddy ..

@ozzyvargas2335

Жыл бұрын

Where did you get the carbon tank pad from?

@pmilluh

Жыл бұрын

Where did u get the brocks exhaust and is it a full system?

2005 zx636 I had was around 115 bhp at the wheel. It was a weapon🤘these new one sure are pretty though. Great vlog as we have come to expect from you Chris👌

nice to see a 600cc in your hands . congratulations on 100k subs. Love from Patagonia Argentina

Anyone else see that huge puff of brown smoke at 6:17??

@jorgezx6r

Жыл бұрын

Tf was thatt 😭🤣

@RapidRedRider

Жыл бұрын

No idea man, I don’t think I’ve ever seen exhaust smoke that color

Your channel is never boring 🔥

Looks like u made it to 100k congrats.. I love this channel

I got a full akra exhaust on my 2021 zx6r and every said it was overkill. Thank you for explaining in this video.

Honestly, I know this is the Bike I should have chose - my 2018 ZX10R is too much bike for the street….but I love it; and with Moore Mafia’s mail-in flash tune back in 2021.

100K subs! Congrats!! 🎉🎉

As always a banging video.

I've got to admit that this is one of the best sounding bikes I've heard on the channel and I'm watching on a Samsung 70in with surround sound! It might be a little different in person but on video this 600 sounds FUGGIN awesome!!!🏍🔥🔥🔥

@MRR-qv3bw

Жыл бұрын

Even with the out of balance tire😜

So, were a few horses left in the stable with the chain situation. I bought a new KTM 1290 SAS in the Spring and had to adjust my chain because it was waaaaay too tight in the initial setup.

Damn those 636 are hard to handle when we are on track. I hang but they be fast.

My 21 gsxr600 now tuned perfectly makes 113 hp. I’m happy. Those are good numbers My full exhaust is a black widow, I love it but maybe 2 hp

The 2021 636 ZX-6R has been my favorite for awhile now, maybe one day

@josephjoestar5444

Жыл бұрын

Why not the CRB

@bound6172

4 ай бұрын

@@josephjoestar5444cause cbr’s are boring bikes

Congrats on 100K.

Moor Mafia Team congrats on that 100K💯

Been riding 40 yrs and have had full exhaust systems on my inline fours but now have the 2022 Kawasaki z900rs cafe and I am not going to modify it for performance. Kawasaki has done a great job on the tuned exhaust and it's fast enough for me.

@796andy2

Жыл бұрын

I'd go sign the papers if they were faster , love them ! (from an old gpz guy)

Went from a Moore Mafia flash to a custom flash developed on a 636 from 2 years of road racing then a Dyno tune by the same guy ended up making 125.1 and 49.70 also was having the same issue with my chain

I can remember way back. When D&D stopped making sport bike exhaust. Engineering said it’s beyond difficult to make a better curve than the oem Course this was all pre cats and still with carbs.

Love your videos and hope to ride west to your shop one day (Charleston) but I wish you tuned KTM’s. My 21 SDR could use one!

Sounds really good!!🔥👍

mods arn't just for HP gains but ya gotta think about weight to, 15-20lbs off a 600cc through various mods is like adding HP.

Congrats for 100k. Keep the great content coming.

As the old 'marketing' slogan goes: "Sure, the Brock's full system costs more...BUT...you're worth it !! " haha I enjoyed the vid!

YESSIR wicked bike and sounds great.👍🏾🏁🏁🏁

Brah you reached 100k 🎉🎉🎉🎉🎉🎉

Might have an oval sprocket. A friend had the same issue out of a cheap Chinese front sprocket

Yet another great video, just wondering has anyone you know of played with the xjr1300 yamaha dynowork?built motor?

It looks like you will get about two or three more horsepower with a full exhaust on this bike vs a slip on or three quarter.

Cool shirt dude. I need one XL

i had that with my old chain it would actually hold the bike back some from revving all the way out

Wassup chrissss🔥🏁

I've owned several bikes from 600s all the way up to liter bikes I've had a 3 Kawis 636s and tho they aren't as fast as say a Zx10 they are very comfortable and the power very manageable making them a blast to ride to this day there is many times if the wife isn't coming out riding with me I'll leave the R1 in the garage in take off on her 636

lesson learned ;) the chain puls a few horse power hehe instant replament it is ;) slick bike :D

Great video

Great video ☺️🤩👍👍

122 out of a 600?! Outstanding!

@lametraserillos1

Жыл бұрын

636 cc and a very good engine ...

What is the system that you seen with the beat results. You can say just with the 600 class? The reason I am asking is because I am building a killer bike and want only the best parts. This is for a 2005 zx6r 636. I also have a lot of work being done to the motor to make more power as well. If you were just a little closer, I would take it to you for a tune. Who knows, I might still take it all the way out east to do it. Love your video's.

Hello brother, This maybe a stupid question 🙄 🤣 but... Can the ecu just be sent to you for the tuning or the bike is still needed for dyno hehe. I just assume you have some settings save from previous set up

Hello Chris 👋 question. When dyno tuning. From pump gas . To other fuels . Does this mean that the bike has been tune . For pump gas. As well as the other fuels. It just gets different performance hp

Went with an M4 street slayer full system on my 2019 zx6r. Went from 110hp to 117hp after the duno tune.

@fathomz

Жыл бұрын

thats sick gains

@nickn7939

8 ай бұрын

yeah i went graves full system with a tune same gen zx6r as yours, they butchered the tune from the factory and it is way too choppy to comply with euro emissions, getting a new tune is worth it just for that. I noticed more torque from 11k to 14k rpms.

@michaelwalker7696

8 ай бұрын

@nickn7939 factory tune makes the secondary throttle plates close down to 68% at around 10k rpm. So it's a dog at around then till after getting it flashed.

What year is that color scheme on the Zx6r? Love it

I would say no matter the gain the simple fact the engine can breath better will help with longevity

@nickn7939

8 ай бұрын

also the sound alone is worth it.

Would love to see you tune a Triumph Daytona 675r, might give the Kawi a run for its money

@monkmoto1887

Жыл бұрын

Might blow up on the dyno too

@clubstyleridahd4695

Жыл бұрын

@@monkmoto1887 lol

@ThisHourHas21Minutes

Жыл бұрын

@@monkmoto1887 😂

Lucky it didn't snap. had that yoght and loose spots on a mates Yam R1 chain. it snapped on me and smacked the tail section to bits and also smacked the shiats outta me on my side and a55. thank God i was wearing my riding gear.

Dude, you’re already at 100k likes 😂

Can you do a popping tune on a zx6r or it can’t be done

That's insane😎

have u done any rsv4 1100 factorys?

Hey man, is there any way I could talk to you? I would like to send my écu for my Zx6r to be flash tuned but I’m not sure if you’ll have the tune information for the mods I have on it? I will be posting a video on my other channel about all my installs and flashing the écu and stuff so I just wanted to see if we could communicate in any way. Let me know

So, when are you going to start doing European bikes? I'm not putting an exhaust on my Triumph until I can get it properly tuned.

Hey I have a question titanium clutch hardware is it a benefit

Do u recommend an alien head or a short meg for a gsxr1000 2015?

First thing I thought was "bad chain" when I heard the first pull. haha

boom! i often find myself trying to explain that once the lube leaves the pins interior area its trash...or in need of a spa session....i do still wonder why buy a 600. it's much better to ride slow on a fast bike than it is to ride fast on a slow bike....please comment.

Imo most riders put a full exhaust system just for the sound

can you tune the quick shifter speed?

This is why I let the professionals mount my tires

@DukeofLeicester

Жыл бұрын

Wasn’t a wheel balancing issue, feller.

Should do this with a r6 😢need more Yamaha love

I have a question if I was to acquire a Ducati Panigale V4 are you able to tune it for more hp tq etc. what would help? Full exhaust or will it be fine with just a muffler upgrade? Would like to know it you can flash that ECU.

@JasonDFD3S

Жыл бұрын

I would love to know as well! Chris tuned my Gsx-r 750 and I love it. I own a 2021 Panigale V4 and thinking of going with the Termi slip on. Hopefully Chris can tune it. 🙏

@anthonylove6639

Жыл бұрын

Nah man, I think there is no Italian bikes Chris can tune. It’s only Japan exports he focuses on.

I think you got something going on with your zuke 1000 I think you should attend panda spooktacular event

Is mivv exhaust good value for the money ?

Chris: Love your channel. You are an incredible racer and tuner. PLEASE say pound-feet of torque instead of foot pounds. :)

@Popsm0ke

Жыл бұрын

Lbs/ft

What’s the difference from buying a full exhaust from just getting a slip on and a Decat

What else can you do to make them faster

I put full exhaust on my 650 and mannnnn it’s loud now and way quicker.

I'd figure a better breathing exhaust would cause it to run lean .

im just curious, can you make your bike shoot flames with your ecu mod without having a full exhuast? If I just get a slip on exhuast can it still shoot flames?

@archive636

Жыл бұрын

Late reply, but no you will either need to decat/gut the stock headers or buy aftermarket headers to shoot flames.

I figure the best power mod for a Gsxr 600 is to buy the Gsxr 750 then I don't have to mod it except for a voodoo slip on exhaust and a Moore Mafia ecu flash to make it sound like very loud angry demon. Is this a good idea? 🙂

hey is brocks performance in NC

I really have a question, why do you always tune it in 5 gear??

Sharp color scheme

Chris are you going to the event at Shady Side Oct 1st?

@Popsm0ke

Жыл бұрын

What's going on at ss ?

What was that puff at 6:20.

Hey Chris I have a 2023 zx6r and it tops out at 138 can that be fixed with the flash ?

@dominiquedinkins3686

Жыл бұрын

Your bike has 3 power levels your prob in low

Have a Graves slip on on my ZX-6R... worth it to get the full exhaust?🤔

I wish he could see my 2019 ZX6R. 😂

I have a ‘05 and a ‘08 ZX10R. I have a full Akropovick on the ‘05. Any other mods you might recommend for better performance?

@bacchusthompson5834

Жыл бұрын

Do you have a Flash or Tune on the '05... Install "Block Plates", remove Secondary Throttle Blades, a good Filter, switch out the 2 middle Velocity Stacks (Long Ones) with 2 OEM short Velocity Stacks, Airbox Mod, and remove the divider inside the rubber Ram Air ducts. If you want to go further than that, install a Racing Head Gasket and have the Cams degreed... That will get you close to 170whp

@RealRickCox

Жыл бұрын

@@bacchusthompson5834 Interesting that you should mention the removal of the secondary throttle blades. I'm getting a weird error right now (error code 32) that is complaining about the secondary throttle sensor and won't let it rev past about 6500rpm. My bike has a power commander 3, but I'm suspecting something might be up with it. Can you point me to a video or place where I can buy all the mods you've suggested? I'd love to get this to do power up wheelies... it wouldn't do them even before this error started happening.

How many prizes are won ?

Nice. 😁

The useless windscreen tells me he’s a slow boy but it’s still a nice bike 👍🏽

@DukeofLeicester

Жыл бұрын

You’re right, it is useless lol. The fake carbon fiber windscreen is the one thing about the bike I couldn’t stand when I bought it. Finally got the light smoke puig coming in monday

@qck2spool942

Жыл бұрын

@@DukeofLeicester nice. I have the same bike but 2019 in grey. Love those 636’s man they make some good power. Ride safe brotha!

So far all the zx636r hover around 120hp after a tune. Don't think u need a full exhaust system. Unless u just want the looks.🤔

If I had one, my answer would be an unequivocal “no”. Straight from the factory, these bikes run 0-100 in 6 seconds flat and do the 1/4 mile in under 11. They’re blisteringly fast, faster than many earlier bikes with much more displacement and faster than most bikes period. So for me, the ~$2,000 required for a full system and tune would net me power and noise levels that are just not necessary. It already has a decent I-4 howl and it’s already fast as hell, dude. Leave it stock.

Did magic mike quit?

Watching from Antigua 🇦🇬 #268

Full exhaust on a 600 will give you 10hp but you lose down low torque which affects low speed drivability.

I put a full yoshi on my 650 ninja (21) and all I can say is wow! With stock exhaust I had to shift every 10/15 mph because the rpm’s would be so high- with this exhaust ~~> revs out waaaaay longer and I didn’t even need to re-gear it…..I’m actually very impressed.

@Kilrathal

Жыл бұрын

This literally isn’t how it works 🙈

@alexventrov6826

Жыл бұрын

lmao what in gods name are you talking about 😂😂😂

Let me tell you this. It is worth it

🏍

whats up with the bandlero car in the other garage, will you race it for content on the channel ?

Pls share ur comments on high efficiency fuel injectors with good ignition system to get more power along with good efficiency and less pollutants

@t.s.racing

Жыл бұрын

Are you serious? Wrong channel to worry about pollutants, on a damn motorcycle no less. Easy Karen.

@naveen..873

Жыл бұрын

@@t.s.racing when u r building a supercharged road bike , everything need to be in limits

I don't understand why they put So many restrictions on these bikes Why don't they give less horse power With no Restrictions

🇬🇧❤️

I tried to tell this dude that an Akropovich exhaust is not the best exhaust. He said u get what u pay for, so I bout some titanium from ticon fab my own exhaust. Bottom line same bikes same dyno same mileage, my results were +11whp +7wtq all across the graph. He was so quiet 😂😂😂😂