Amen bub!! Too many people out here running down everyone else who can't put as much money in their builds as they can. We aren't all blessed with a silver spoon in our mouths. I drive a semi and have raised my family to appreciate what they have and never run down the next man for what he doesn't. I've walked away from several people for that very reason and some of them I thought were friends of mine. They need to remember that the man you step on today may be the one that picks you up tomorrow!🤠👍

@SquarebodyStuff

2 жыл бұрын

Well said.

@grumpygrant4537

Жыл бұрын

Amen brother. Ive got a hand me down 78 type lt Camaro with a305 sbc. Love that car to death. Sucks not having as much power as I want but it’s what I got and I own it 👍

@SquarebodyStuff

Жыл бұрын

Put a good intake, headers and cam in it and have a blast. Or keep it as is and enjoy it just the same.

@thisisyourcaptainspeaking2259

7 ай бұрын

My factory unmolested '81 in a g-body runs like a fine watch, no complaints!

@user-wu2yi2fu7h

6 ай бұрын

I have buddy with a short bed chevy 305. Ede cam intake 500 carb headers and 390 gears. Not a race truck at all but a super fun trk to cruise around in burns tires sounds great

The 305 is definitely a bomb-proof engine. It's not my favorite, but there's nothing wrong with getting more performance with what you have.

@CrazyWillie01

Жыл бұрын

Here here Ma Man

@SteveoGregg

9 ай бұрын

Absolutely!!🍺

Had a G20 shorty with the L03 (TBI) 5.0 and the 700R4. Wasn't gonna win any races but I found her to have more than enough power to move that 6000 pound van around. My van had a towing package complete with the trans cooler and it did a great job towing. When I got her, the motor needed some serious love, so I changed fluids, gave a tune up and put seafoam through it. Even though it was mostly stock(I put a dual exhaust and larger open air intake from K&N) that little bit of love really woke her up. I've driven all sorts of vehicles(all the different size step vans, modern vans and pickups, straight trucks with 8 to 13 litre motors, and even city transit buses) and not once was I ever disappointed with how she ran or her performance. I miss that van....

305 is a good engine. In the 80s a friend of mine had one in a 1987 Monte SS and other mods (cam or chip) of the existing engine that made it a tire roaster. It was previously owned (before bought) by somebody who was part of a Monte Carlo club and the car ripped. We do not know what the mods we're but it ran excellent.

Mr, I have never had the privilege of watching your KZread channel before,. But I just cought your 305 video. And I absolutely appreciate your your spirit. It doesn't matter if it's a John Deere or a Kenworth, Fun is fun , get out your tool box and get it to run. I have a 305 that I rebuilt about 26 years ago and it's never let me down or left me walking. Why a 305 ? Well I guess I wanted to be different from all the guys that were building 350s,. And I had gotten it for free and it was still a good running engine that did not smoke or knock. Being that it was free it allowed me a few extra dollars to use for parts. It is bored.030 and has 10.25:1 compression and.450 lift crane cam along with a Edelbrock four barrel and intake, and long tube headers. And I'm running a 700R4 behind it In my 1977 long bed , I never had it dyno tested or anything, but I'd say it's got about 300hp and around 350ft tq. And that is plenty enough to put a smile on my face and tow or haul what ever I need it for. Tim from Wisconsin.

@SquarebodyStuff

Жыл бұрын

Thanks for tuning in Tim. I hope you enjoy the channel

Rebuilding one right now. New rod, main and cam bearings, xe268h Comp cam, new .550 lift valve springs, double roller timing chain, new push rods, roller tip rockers, shorty headers, Holley dual plane intake, 650 Holley, msd ignition.

Pretty much any small block chevy can run well. Get your compression up in the 9's. Then add a lil bit bigger cam, headers, duals, good intake & 4 barrel. Get the dizzy setup right and have fun 👍👍 Stick shift helps too 😊

My grandpa who was a professional dirt late model racer and race engine builder, always said “ The best way to make a 305 run better is to pull it out and put a 350/355/358 or put the 383 stroker in it with a 400 crank” gramps called the 305 “cheap power” my dad said he always hated those 305’s but he gave one to my dad when he was younger and now my father and I are gonna pull it out the astro van and do it up. I know my grandpa will be laughing at us is heaven.

I am here in n.e.ohio and a widow.My boo had a 305 in it and now a decent 350.If built right the 305 can be a good engine.

Your “rant” just earned my subscription sir, common sense to me! Great video thanks!

@SquarebodyStuff

3 ай бұрын

Thanks

1992 Camaro with a 305/5 speed. World SR Torquer heads, comp xr 264hr-12 cam, Hooker headers and Magnflow exhaust. Edelbrock intake and runners. 13.24 @ 104.7. Not bad for the little engine that "couldn't"!!

@deathpunches

Жыл бұрын

I had a 305/5speed 91 Camaro and honestly that was a hot car

@shootermcgavin2819

Ай бұрын

Agreed. 305 can make great power. I had a 91 camaro. Typical teal colored Ttop RS package that used to be common. With the LO3, 700R4 and the 273 geared rear end the car had great gas mileage on the freeway

I had a 305 in my 84 3/4 ton with a granny 4 speed with a aftermarket cam in it. I was told it was a 350 when I bought the truck. And it ran great, even raced a built 70 chevelle way back when. Sure my truck wasn’t built to race. But I street raced it, my truck had a reputation as a fast truck. Not even knowing it was a built 305. I would build a stroke 305 in a heartbeat with some good 601 HO heads.

@dustinvines5017

Жыл бұрын

I've had a 84 c10 for about 4 or 5 years it sat up for a year or 2 cause I didn't have the money to fix er up but now I do and just found out it's a 305 and not a 350 like I was told.

@SquarebodyStuff

Жыл бұрын

Nothing wrong with that. Still plenty of fun can be had with a 305.

Not much of a mechanic beyond oil changes, brake pads and spark plugs, but slowly getting into it so I can take better care of my 41 year old C10 with its original 305 and 3 speed automatic. Just amazes me these components can last so many decades and still work. Bought the truck for $900 hoping it would last a summer while I remodeled a home and then I'd sell it for scrap value. That was 11 years ago and she keeps running and running. Good video, learned a lot.

My 84 gmc c15 has been my favorite truck I have owned, 305 with a quadrajet, 5/7 drop runs and drives so smooth. My daughter's favorite ride to take to kindergarten!

I have a 4.8 with aftermarket heads on it and a tune it does surprisingly well. Most people wouldn't hop up a 4.8 in much the same way. I love that little LS it's survived 16 years of my torture.

I’ m personally going to build my 305 as my 86 TransAm is all original matching numbers. The 305 HO was a reasonable quick car for the time . And even bone stock could hit 140+ . Out of the box back when I got it.

@catsaregovernmentspies

8 ай бұрын

I had an 86 T/A with the tuned port 305. It would lay posi marks all day bone stock.

@irocitZ

6 ай бұрын

I think I'm gonna do the same, I have a #s matching 84 Z28 with the L69 H.O. 4 barrel engine. It runs great, it may not win every race but at a car show that's a different story. It actually does better than I ever expected, I've had faster cars. Big block Chevelles, all three 4th gens, 66 Nova that had a 4.88 gear as well as some other cars that were all faster than my current car. I like my current car for what it is, it's a good crusier that's more reliable than everything I used to own. It has more creature comforts like A/C and t tops, I'm not out drag racing all the time like I used to, in my area there's red light and speed cameras everywhere as well as speed bumps on many streets. For now, I'm sticking with the 305.

@trillrifaxegrindor4411

6 ай бұрын

there wasnt any 86 305 h/o's bro....discontinued becuase of fuel boiling

I put a edelbrock performer and 600 holley on my 85pickup with a 305 and I was very impressed with the power gains. Yes the 305 responds well with bolt ons.

@jakeschneider5491

Жыл бұрын

How did it affect your mpg?

@joe-hp4nk

Жыл бұрын

@@jakeschneider5491 I didn't check, but it seemed like the mileage was better.

@kkd8334

Жыл бұрын

Can you add a link

@SquarebodyStuff

Жыл бұрын

A link to what?

I love it when you say don't trash talk let them down had that happen to me when I said I wanted to put a 305 in a ford ranger well its in and almost ready to go

Good stuff! Here’s my personal opinion, I prefer 350s by a long shot. However, I’ve owned a carb swapped 305 swb OBS with a 5 speed and small rv cam. Talk about a fun truck! It had more torque with that rv cam than my other 350 tbi 5 speed swb OBS. I also just recently cam swapped a 305 that, unbeknownst to me, had a bad cam lobe when I bought it. That 305 is in a Camaro and has longtubes and 416 heads. That sucker seriously surprised me! Puts me back in the seat good. Overall I’d prefer a 350 but the 305s are still fun to mess with.

Just wanna say thank you SS! I'll be honest with you. I'm just dipping my toes into the water. I know a little bit about engines but I'm not a professional. I got a heck of a deal on a camaro with a built 305 and the stock engine along with it. But I really appreciate you stepping up for us little guys who don't have a lot of information to make more power. All I have is a 315 on 350 vortec heads rolling rockers and efi block. Other than that I feel personally attacked and bullied online because I needed a running car and the 87 iroc was a dream come true. The man is giving me a box truck full of spare parts and I hope to see good things come from this setup. So again, thank you so much for using your platform and making me feel like I belong.

@SquarebodyStuff

6 ай бұрын

Absolutely nothing wrong with hot rodding a 305.

Only vette to get the 305 was the 1980 California emissions package.

I loved my 305. Roller block, Flat tops, vortec heads, lt4 hot cam, long tubes, knock off copy of a performer rpm, and a 650 Holley. Made 340hp at the crank and was a blast in that little Vega.

@MasterWitchDoctor

Жыл бұрын

wrong cam buddy, the 305 heads are designed to flow max between .400 and .450 lift. With 1.5 ratio rockers your LT4 hotcam is .492 lift and only cost you hp above .450 due to parasitic stress on the crank. Another reason its wrong is because the lobe separation angle is wrong for a 305. The proven formula for determining the correct LSA is 128 - (cubic inches / number of cylinders / intake valve size x .91) = 128 - (305 / 8 / 1.84 x .91) = 109.14470, yours in 112 which is costing you hp and torque just in the overlap alone. Using this formula you will never have to guess as to what works and what doesnt. I used it when I had the cam in my NHRA K/SA Monte Carlo SS ground and on Eddie Carlisle's dyno my L69 makes 427 hp @ 6700 rpm with unported heads, stock intake, and Rochester carb with 9.5:1 compression and VP C10 fuel. FYI my custom ground cam has .403 lift intake .415 lift exhaust (stock numbers) which is right in spec with the flow numbers of the 081 centerbolt heads (the best non vortec 305 heads). So you ask how fast is my K Stock Monte Carlo? It runs a consistent 11.60s @ 118 mph and has put more cars on the trailer than I care to remember. This is a car that the weight factor is 3286 lbs with my driver so its not on a diet like most of the not stock classes.

@radster8760

Жыл бұрын

@MasterWitchDoctor I built my entire engine for less than $650. I may have not used the optimal parts but I had no complaints. It did its job and still does in my son's s10. Been dead reliable and has enough oomph to roast the tires til they blow.

@MasterWitchDoctor

Жыл бұрын

@@radster8760 you dont need to spend a ton of money unless youre competing in an NRHA sanctioned class like Stock Eliminator or Super Stock. And in the blink of an eye theyll come tear you down and check everything if any of the whiners cry because they got put on a trailer by a 305.

@radster8760

Жыл бұрын

@MasterWitchDoctor I never ran sanctioned races. Just at my local 1/8th mile track. Best of 8.50 with bad suspension and street tires.

@MasterWitchDoctor

Жыл бұрын

@@radster8760 with a 305?

And good video, really appreciate the part at the end talking about the current gatekeeping in the car community. People are really ruining what we used to have with forums and full build guides with pictures everyone trying to help each other, that stuff is disappearing nowadays.

@SquarebodyStuff

Жыл бұрын

Thanks.

Thank you for the rant! This day and age has become remarks made on electronic communications. Don't loose the thought that there is a person flesh and blood you are talking to. They may not have the resources or disposable income that some do. Bea good shepherd.

Been a gearhead since a youngin. My grandpa showed me and I showed my kid. He's 19 now and I see he payed more attention than I thought. Didnt have the internet as a teen so always asked and listened to the old guys. Yeah the smartass comment stuff sucks if you ever want to ask something. Well checking out repair manuals from the library to fix your car doesn't seem so bad

When I was 18 (32 now) I got an 83/84 Square with 185k miles on it. 305 with a 700R. I drove the piss out of that truck for several years, eventually ending up with over 235k miles on it. Started smoking a bit on startup and burning a little oil near the end, but still fired right up and ran fine. I pulled it and threw a 350 bored .30 over in it and am very happy. If you can get a 305 for cheap, take it. Never gonna be a high performance motor, but they run like tops, and are hard to kill. Great motor for young guys looking for their first vehicle.

@workingmansrestorations7071

2 жыл бұрын

I get one for $100... Came with ram horn manifolds, extra bell housing, new 2 barrel carb... I was happy to have it to have laying around for a spare

@jamesmichael3998

2 жыл бұрын

My 98 sierra 305 has 276,000 on the clock and is as dependable as you could ever want. Cheers from Jacksonville Florida 🌞

I really like the 305 great engines for many projects. 4 barrel cam aluminum intake and headers will really wake them up factory cams really had the power potential of the 305 cut down. You have a great channel enjoy watching Thank You.

@SquarebodyStuff

2 жыл бұрын

Thanks

Had a 305 out of a wreck z28 4bbl aluminum intake factory. Did put a cam in it!

Yes! Preach it! I also get frustrated by those who put others down if they don’t have a 20K build. I appreciate you speaking up.

I have six 305’s that I spent maybe $200 on total. I’m working with what I have. It’s a V8. However, I’m running ethanol only that I will make myself.

Your words at the end of the video are what we need more of. I've always enjoyed cars shows and hanging at the drag strip where everyone will help you out.

@SquarebodyStuff

Жыл бұрын

Thanks

10:35 This message is something many need to hear and be supportive of, particularly with rodders and builders. Wrench turning, especially with the younger generation, fewer and fewer are doing their own builds. The best teacher is experience and some helpful info could save inexperienced folks lots of time and grief.

@MasterWitchDoctor

Жыл бұрын

I did that and Chad shot his mouth off to me so I deleted all my responses and unsubbed him.

@SquarebodyStuff

Жыл бұрын

All I did was accepted your challenge to a race.

@MasterWitchDoctor

Жыл бұрын

@@SquarebodyStuff these are 100% class legal cars

@MasterWitchDoctor

Жыл бұрын

@@SquarebodyStuff If I remember correctly you said a proven fact that David Vizard has used for 30+ years to win multiple races was "theoretical" and doesnt work in the real world. Then you told me to post videos, get 500 subs and meet you at the No Name Nationals. The What? Who is the race sponsor? Like Ill ever post a video on here and get subs. My home track is Gainesville Florida and local track is Memphis. You want a race you better bring something faster than squeaky (a lot faster) because my K/SA is my slowest car. Meet me in Memphis (a real track) and bring your wallet and Ill bring my Monte Carlo SS and my SS/J Super Stock Chevy II and show you what a mid 8 second car runs like at 160+ mph.

@ryanwing6671

Жыл бұрын

@@MasterWitchDoctor wow sweet pea calm down a bit, it sounds like you got your thong twisted up. I’m sure wherever you are from, you are a pretty big deal, and if so forgive me for not caring. But I think chad was trying to get you to make videos so you could show the world just how much knowledge you gained from sniffing David Vizards cheeks. Then bring one of those sweet 8 second hot rods out to show the world just how big your pecker is 😂. But I get it bein a keyboard warrior is tough and all. You got a real image to upkeep. I get it. I really do. And I tell ya , I think you could walk right over ole squeaky with your “Purpose Built sUpEr sToCkEr🤪. I would hope so. But if ya didn’t I would just laugh and laugh at you some more. Hell most of our street cars run mid 7’s in the 1/4 where I’m from, so fellas like yourself aren’t really on our radar. In conclusion you seem like a nice fella I’d like to line up with and put ya over my knee. So if ya ever do feel like bustin out one of those sweet super stockers 😂😂😂 tap a guy on the shoulder 😏

I had a nice little 283 in a car back in the 90s Heads, mild cam, intake, good exhaust. That engine ran very strong.

@ivanmitchell3876

Жыл бұрын

had 283 prior 2 the 305.loved both.👍👍

Good video, appreciate the time taken on this topic. In the years i have lurked/posted in squarebody forums or anything having to do with a 305, i have heard a ton of negativity towards it. So seeing this was refreshing. I have a 305 HO in my 87 R10 mated to a 700r4 and with a few upgrades here and there, its been really fun to drive over the years. I do plan on LS swapping for a 6.0l iron block, but thats a ways away. Thanks again for the video!

Thank you for this vid. Im a beginner, at 51, just bought my first hot rod. 84 z28 305h.o. Definitely on a budget, and not trying to race it. Its a rare auto form conversion, so i want to keep the motor original, with a mild build. Keeping my 305 and keeping it simple is my path. Its all about smiles per gallon! Great to know this info, and great to know that people are sharing knowledge.

@user-wu2yi2fu7h

6 ай бұрын

Roller tip rockers headers and a decent cam is very cheap and can wake it up. You can have alot fun in that 84. I too am older I turned 50 in Oct. Finally getting start building toys again with grown kids and grand kids things are always on a budget.

I appreciate your positive attitude! I took a junkyard 305 and put it in my squarebody, it has made a fine replacement for the lowly six cylinder that was original to that truck.

Great information Man thanks for the good news

83 k5 Lg4 305 re ring and bearings 601 heads port match and porting 929 cam cast intake and long tube Headers single 3 inch exhaust 4.10 gears f+R. Tires 33x12.5r15 700r4 np241 good torque and mpg

Thank you understanding the low budget people!

@SquarebodyStuff

11 ай бұрын

I am a low budget people. I try to have fun as cheap as I can.

I fixed the the 305 in my elcamino cause I'm not trying to be a speed demon. As a trucker I've seen so many people with big engines and can't drive to save their lives

Love the hat. Thank you for encouraging the lower budget guys. I found a running 305 for a hundred bucks and decided to do my very first, low risk, engine rebuild

@SquarebodyStuff

4 ай бұрын

Thanks, it's one of my favorite hats.

If it's what you got and you just want to bolt up a few add-ons they're really fun motors. Don't always need to be pushing crazy numbers or huge displacement. My favorite memories are driving an old monte ss with one and not once was I displeased. Great video!

@jakeschneider5491

Жыл бұрын

What’s some good add one that don’t affect mpg?

Just picked up a 305/200r4 from a 87 Monte Carlo SS. 65k miles for $400 fan to slip yolk. He was LS swapping it. So I got a great deal to get my car driving and he's doing his thing. Nice when everyone's doing the best they can with what they have.

Thanks for the rant… we all need honest, polite help when we are first starting something new to us !!!!

I enjoy watching and listening to you.... Hello from Denmark :)

@SquarebodyStuff

Ай бұрын

Thanks. I appreciate that.

I just pulled my 305 from my 46 Plymouth to rebuild. Drivers side was slightly smoking. I gave it to the machine shop. I’ll give you an update when I get it back. I’m going stock as it’s my daily.

Ive got a 68k 305 83 firebird with: (lg4) intake headers 1.6 roller rockers 2.5 exhaust (single) weight reduced. 5 speed. and its a burn out machine! glad to see people posting videos about this motor.

Good tips for the 305 small block … I liked your comment about people don’t have to put other ideas down!! Good job with the positive message!!

@SquarebodyStuff

Жыл бұрын

Thanks

buddy i sure like your attitude about helping people out instead of putting people down

I got a 1988 chevy g10 sportvan with a 305 TBI that I am doing a carb conversion on. I got edelbrock intake and carb and am picking up a set of 416s heads. Thanks for the knowledge brother and God bless you

Great video……I love the end….. don’t put a man down, if you got nothing good just move on…..I have a 305 that blew a head gasket, it has 99,890 miles on it….came out of an 86 c10 I owned years ago…..I replaced it with a newly built 350 3970010 from a 72 c10 and to be honest ….not much difference …..couldn’t tell just riding around, the 350 did a lil better when you put your foot into the fan, but, not enough to make me do it again……im going to put the 305 in something one day, for now she sitting in my garage on a stand here in Alabama, I took the heads off and filled the cylinders up with some oil put heads back on it…plugs still in it….one day she will be back on the road.

The main problem with the 305 engine is too many people are trying to use a 350 style cam in it (112 to 114 LCA). The heads on the 305 were horrible. People need to look for a cam that has 108 to 110 LCA, and a decent set of heads for them, stock heads were the worst.

Great content and thanks for your insights

if you build a 305 and a 350 with the same aftermarket parts, both has the same grind cam for instance, you will get more power above stock than you would get with a 305 stock. so same parts but more power in the 350. if you do have a 305, drive hell out of it and if you can wear it out, put a 350 in

I liked your video twice cause of what you were sayin. I forgot i liked it once already lol

This is helpful I'm currently pepping my 305 up...I've added double hump heads 488 lift cam aluminum intake and headers hoping to make a little power

Hello From Estonia!I have a 305,it’s cool little motor runs good. I’ve but bigger cam,intake,headers ang new igniton in it…makes me smile every time i drive it…and there always be some guys saying “nice boad ancor”

Great video! A set of 601 or 416 heads, RV cam, aftermarket aluminum 4 barrel intake, and a set of long tube headers will really wake up a 305. And still get decent gas mileage.

@SquarebodyStuff

2 жыл бұрын

Don't say that too loud. You might offend some of the master engine builders on Facebook. 😅🤣😅

@workingmansrestorations7071

2 жыл бұрын

I had a suburban that ended up being a 305... That thing got Awsome fuel mileage

@mikewillett5076

Жыл бұрын

So just like any other small block Chevy.

@mikewillett5076

Жыл бұрын

@@workingmansrestorations7071 . I always picture a 305 wheezing hard when pushing a 5000+ pound "pre SUV" but glad it ran great for you.

Your channel is dope and i appreciate you putting these videos together. Trying to figure out what to do with my 305 in my 86 monte.

@SquarebodyStuff

Жыл бұрын

Thanks

New to your channel I have a 85 Scottsdale with a 305 I am very well pleased with the little engine it was my first v8 I've owned it since 2009 I have only watched one video of yours it was about the 305 it seems like u have a very nice channel love the old Square body's

FACTS RUN WHAT YOU BRUNG DONT CARE IF ITS A SINGLE CYLINDER LAWN MOWER LETS GET IT

To get more power out of your 305 just turn the air cleaner lid upside down

@michaelmccotter4293

Жыл бұрын

They make a cheap bowl shaped air cleaner spacer for under the air cleaner.Jegs sells it. Called air cleaner enhancer. Up to 10 HP gains they say. I put it on my tbi 305 and it definitely helps it breath! Cheers!!!

Outstanding good sir!! Love your soap box moment because I’m one of those tryin to learn. Great explanation. An idea I would like to see is a comparison/discussion between the 305, 307 and 302 motors. Keep up the good work!

@SquarebodyStuff

2 жыл бұрын

Thanks. Small displacement comparison would be a good conversion. Although the 302, in my opinion, is in a different class.

Formula - - 1987 Caprice 305 roller, put it in 1982 Firebird, no smog gear, Rochester 4BBL adjusted as lean as was still drive-able - - 28 MPG and 15.3 quarter mile.

Hey Chad, first time viewing your video on 305 I've found it to be informative and simply narrated looking forward for more info as regards to this topic. T.l.A

As a disabled veteran I only get around $500 a month and I lost my job due to my PTSD. So for us who only have a 305 there is no way I can just go out and drop a fat dime to get the power. I'll have to take my time and work with what I have. Thank you for the info. I think how quiet she is that will be the first thing she will get. Keep up with the good video.

@SquarebodyStuff

2 жыл бұрын

You'll be surprised on the potential.

@francoisfigeac4942

2 жыл бұрын

@@SquarebodyStuff sweet time will tell. My dad's old truck. Runs fantastic but lack in power.

@themysterycook7320

Жыл бұрын

you are expected to live on $500/month? as a military vet? thats DEPLORABLE!!

@user-wu2yi2fu7h

6 ай бұрын

First off thank you for your service Sir. The next thing is toys are never truly finished so one part at a time has worked for me. I have had the big 468 builds also the 1000 dollar 5.0. Builds at the end of the day it was all fun. Gears seem to always make the biggest difference.

Great video 👍 I’ve built many 305’s and yes you can do a lot with them, more than what people give them credit for.. for as helping someone, I build and document here on KZread play by play and explain what you can do different that works for you, when someone ask a question I’m at the age where I’ll give you best answers, I don’t compete anymore and will help someone with the old school engine, I got one on the way now for a guy in his twenties, he will know some old timers tricks time I’m done with him (it will be documented for anyone else that’s wants to know), I currently now just buy, do some conversion on the squarebody show and sell.. A lot of channels out there will not reply to one’s questions like it’s a big secret, I mentor a lot of builds, questions every day. I looked on KZread to find a channel that dose play by play from start to finish, they only show a lot of what they did not the how, Im documenting the one I got now from when I got it play by play to the show in 4 months..I really enjoy your content, not many of us left that will help someone if they ask about something. I’m a long time follower of your channel, I just don’t comment much 😀.. keep the content coming, really enjoy it and Thanks for sharing with us 👍

@SquarebodyStuff

2 жыл бұрын

Thanks. We appreciate what you are doing.

@avilaa64

2 жыл бұрын

Dad, has a 86 caprice with a 305 engine setting at the shop for a very long time, Im planning on working on it as a start to work on my skills and become more knowledgeable on automotive mechanic

Really good video In particular I really like your views on people starting out Agree with you totally Great attitude, well done

@SquarebodyStuff

2 жыл бұрын

Thanks.

Great video. I have a 1986 Trans Am that I bought in 1990, it has the original 305 with 145,000 miles on it. Over the years I have thought about putting a 350 or 383 in it, but I would have to buy a crate engine (since I cannot build my own) plus I would also have to get another transmission & rear end to handle the extra horsepower, because they are also original, plus shop fees to do all the work, would lead to a lot of money. So that’s why I am looking for ideas to add more power to what I have.

I’d sooner build the 307… can be found just as cheap or free.. however.. it’s a bigger bore. If the 305 has better heads, like 416’s, drop those on the 307. Everything else bolts on. Food for thought.

I have zero experience with the 305. The only interactions I have with them is with people telling me how awful they are. I often wonder how much of their opinion is made up of actual experience vs anecdotal information (ideas just parroted from "the forums"). Hot Rodding feels like it has become very high-end and exclusive. You get the feel that if you're not doing a 1000HP LS/Coyote swap you're not doing anything. The whole idea of hot rodding was to make it better. I blame the litany of car shows available these days. They've done a good job of piquing interests, but they've also skewed people' perceptions. Kinda like trying to buy old cars. Now everybody thinks their old rusty junker is worth tons of money regardless of what it is.

@ivanmitchell3876

Жыл бұрын

the people that misinformed you...🤔 awful hunh.?

@thisisyourcaptainspeaking2259

7 ай бұрын

305 is fantastic for a daily driver and you can tow with it. I'd spring to rebuild one, new pistons, overbore, but it will not blow the doors off a 350/383, love the smaller bore for what it is, a trouble-free runner that's smooth as silk and taken decent care of, will outlast you.

Ijist got done watching a guy put a ebay turbo kit with two pop off valve. They had stock head and a mild cam 700 cfm quadrate they got 515 hp and 550 ft lbs of torque the turbo kit cost only $800.00 . So that a lot of bang for the buck out of a 305 .

Keep preaching. U should be a speaker to people lol. Well said

@SquarebodyStuff

2 жыл бұрын

Thanks. I try not to get on my soap box very often. But sometimes I have to get It off my chest.

I love that people hate the 305. That means piles and piles of dirt cheap engines for me on Marketplace.

Think about it like this. If you go by them too fast they can't see how good you look.

Both my chevy 305 motors have turbocharger, the 83 Caprice has a HX35 turbo, 77 Firebird HX40, both RV camshaft, dual intake manifold, homemade turbocharger piping....the key too make them live with non forged pistons is gapping piston ring for boost. I perfer water injection cooling misting over a intercooler. 77 Pontiac 416 heads are ported plus both have 1.6 rocker arm on the intake side.

@SquarebodyStuff

2 жыл бұрын

Awesome

Love it! I have the most hated L03 tbi in my ‘89 firebird. It only has 35k on the clock and it sat for some time. Im going to refresh and run that with better heads intake and exhaust, shift kit and better gears!!!

@chrisstrande5878

2 жыл бұрын

TBI's are so reliable, great mpg The only thing I see wrong with a 305 is they are cam eaters and the valve seals.

I have had several 305s and I currently drive a 79 c10 long bed 305 and I love it. I am planning to cam it and. Quadrajet swap it.

I'm eagerly awaiting my 305's return from the machine shop ... lost an oil pressure sensor while my son had it , pumped all the oil out on the ground then almost seized . And still made it almost all the 177.5 miles back home . I figgered since it was going to have to be rebuilt why not improve it some . So it's getting a .030 overbore with flat tops for a c/r of around 9.5-9.75:1 ("h" code motor), heads got a 3 angle valve seat job to go with the Elgin e-922-p cam - .444/288° intake and .466/298° exhaust with 112° lobe separation . It's also getting an Edelbrock Performer with a 600 or 650 Holley on top , exhausting thru a set of small/long tube headers , 2" exhaust tube with Thrush Hush muffs . Backing up the motor will be a 700R4 with a shift kit and a 3.42:1 gear set in the rear axle . It has 2.73's right now , I expect great things from this combo when I finish it . I hope it idles fairly smooth , my objective is "sleeper" ...

@SquarebodyStuff

2 жыл бұрын

Sounds like a solid build. That cam should idle good. Smooth with a little lump and plenty of vacuum.

Yeah the 305 will wake up with boost and respond very well; the thicker head gasket between the cylinders make it better resistant to being blown, also the rotating assembly crank rods and pistons are lighter 👍🐎

Good video and like the channel, well said comments also. Keep it up, I look forward to what you are doing.

@SquarebodyStuff

2 жыл бұрын

Thanks.

Hope you don't mind my comment? Many years ago I talked to an individual with a four-wheel drive Chevy. Around the 1985. He kept everything stock put an RV cam in and he was pretty impressed with the difference! Just saying!

@SquarebodyStuff

7 ай бұрын

I appreciate the comments. Nothing wrong with a good 305. I just finished building a 339 stroker out of one here on my channel.

I wish Chevy would bring back the 302.

If you put 350 heads on a 305, you will have a low compression 305 with potential valve to block interference issues. If you can find a set (since they no longer make them), get a set of World Products S/R Torquer 305 heads. 1.94/1.5 valves with 58cc chambers and great flow ... these heads with a Holley 650, a Bow Tie LT-1 intake, a good RV cam (say, 220~ duration at .050, 110 LSA, .46 lift etc), you can easily make 300HP with one. I've built a few 305s over the years, and sometimes to show up the 'get a 350' crowd. Just remember, a 305 is still a Small Block Chevrolet, and responds to mods the way any Small Block Chevrolet will. BTW, Mortec is an excellent site.

WE just build a 305 as a learn how to build an engine motor. It was a lot of fun. It came with our truck and it sounds pretty good. Turned out to be a fun build and fun to learn on. Ours is running in a 1963 Chevy c10 with a 3 on the tree. WE aint trying to go fast haha

Well said! There seems to be a prevelent attitude nowadays that unless you have a 500 horsepower plus engine ,you're nothing! I remember back in my day, it was only the wealthy kids or heck, even the wealthy adults that had extremely high horsepower motors. The fun was being able to build budget motors and cars that could beat them. I grew up in the early 80s. I can tell you it was a blast beating brand new Mustang gts and camaros that their Daddy bought them. Lol! Im personally proud of the fact that i grew up having to work for everything i have. Im a lot older now and can afford to buy fast cars, and i have. However, if im being brutally honest, the most fun I've had in cars was with cars i actually built or modified. Nothing takes the joy out of a car more than having to worry about the warranty. Anyways, just my two cents...

@SquarebodyStuff

5 ай бұрын

I agree 100%

I have several 267 small block Chevys 3 1/2 inch bore with a 3.48 stroke uses crank casting number 3932442 I have engine block casting number 471511 and 14016376 which is a dual dipstick block I presently have a 267 in my 1980 Chevy Malibu with a 5-speed with a 229 rear axle ratio and it turns 2000 RPM 75 mph in Montana where a resident the speed limit is 85 on the freeway and I have a roller cam out of a 95 Chevy Caprice 350 Lt1 or the 263 4.3 L V8 L99 which has a 418 intake and a 430 exhaust and its and it's on 111 lobe center cam identification number 600 or 779 and I Advanced the cam 6° with an Offenhauser dual Port 360 a set of Edelbrock headers which are no longer manufactured manifold with a Quadrajet I really like this 305 video you produced because I like doing weird stuff that nobody does oftentimes people will come by and say is that 350 or 3:05 no it's a 267 RPO L 39 49 state federal engine 1979 to 82 Chevrolet produced in the even put it in other variants of GM G bodies and also a B bodies

@SquarebodyStuff

6 ай бұрын

I just got done building a 339 stroker out of a 305 if you like different. kzread.info/dash/bejne/ZYiLj5ZskcKslLA.html

@jonpaulschafer1871

6 ай бұрын

@@SquarebodyStuff where is your video of it I'd like to see that thank you so much for your comments of encouragement

@SquarebodyStuff

6 ай бұрын

I added a link to the dyno video in the last comment

@jonpaulschafer1871

6 ай бұрын

Thank you

we never got the 305 here in Australia. we did get the 307, 327 and 350 though. sadly, in australia we never got any big block vehicles officially by the large manufacturers here. they exist, but private imports. sadly, here in Australia ALL, ALL CAR Manufacturing stopped here 5 years ago and will likely never return..we also got mopar 273, 381, 340 and 360 . and ford 302 and 351 w and C..

I have a 305 in my 79 monte and fitech injection feels awesome on the 305 with headers and intake

Thanks for this video and I totally agree with your rant at the end 🤘

@SquarebodyStuff

Жыл бұрын

Thank you.

well... I'm doubling up I got a 305 V6 in my GMC, and soon ill have a 305 V8 in my ‘62 triumph TR4. So... Funfunfun

I have a 1982 pontiac trans am with a 305 crossfire fuel injection. All original still runs good. Heck this car still has its original mufflers. And yes he is all decked out to look like kitt from classic knight rider.

305s always hold a place in my shop. They're cheap, infinite aftermarket being an SBC, absolute tanks, and just fun. As much as I've leaned into LS builds recently my favorite build is that cheap teenage hotrod build. And really theres nothing more smile inducing than a $100 305 pull with a thumpr, long tubes, and a holley dialed up to about 1000rpm idle just chopping and spittin' like a full tilt track car.

@SquarebodyStuff

4 ай бұрын

Yup

I fully agree with you about hot rodding in general. Not everyone has a $10 000 dollar budget for the engine.

@rodneyhopper22

Жыл бұрын

You can buy a three fifty Chevy motor in a crate brand new for about a grand

@billskalicky5400

Жыл бұрын

@@rodneyhopper22 maybe you could in 1985.

@henrysmith8012

2 ай бұрын

They make good brim beds.

My old 305 is 25 years old! Still kicking! Only 200k!

I daily drive a 2002 Sierra 4.8 V8 with 3.42 gears. Great on fuel economy and reliable. I considered doing a 5.3 or 6.0 swap, but the 4.8 fits my needs better since I don't have a heavy foot. Now I'm looking at a 80's C10 305 so I'm doing some research. The C10 I just want as a cruiser since my dad had one when I was a kid. You're video helped give me some piece of mind. Thank you!

@SquarebodyStuff

Жыл бұрын

305's. Are great cruisers.

Its been a while, great video!

@SquarebodyStuff

8 ай бұрын

Yes it has, good to hear from you again

Love the last part!!!!!!

I love the 305 good little engine I did one up put a set of vortec 305 heads and an lt1 factory cam ran great and as far as I know still running great buddy of mine needed the engine for his dad's truck so we took it out of my s10 and put it in his dad's square body

@mikef-gi2dg

2 жыл бұрын

That vortec head combo should be the hot ticket, I'll be doing it on mine real soon. And it's all factory parts to boot.

Power Nation just did one and it makes close to 600 Hp and 570 Tq even Eric Holdener did one so yes I would say that the 305 is a daily sleeper also the Olds 307.

@SquarebodyStuff

10 ай бұрын

I've been working on a stroker 305. It should be pretty interesting to see what it makes.