I drove a 6.8 bus from Oregon to Guatemala, and it tackled all the hills, and the elevation changes with zero issues. never gave me any problem

@K-Effect

Жыл бұрын

You never want a bus to quit on you going through the planes/desserts Mexico

@imnotusingmyrealname4566

Жыл бұрын

Wow what a trip. Would love to do something like that one day.

@michaelthomas7408

Жыл бұрын

I drove a 6.8 bus too all the way to Costa Rica! Never gave me issues

@Muscleupsanddangles

8 ай бұрын

How many stops for gas😂

@theroofer3181

5 ай бұрын

@@Muscleupsanddangles No one stops for gas, they pull the gas station with them! :)

2003 Excursion with a V10 that is about to turn over 250,000 miles. Still idles so smooth that I often think it has died at stoplights. 👍

@benjaminmenken5693

9 ай бұрын

Same, I have a f250 200k. The idle on the v10 is smooth as silk. If I have the music up it's impossible to tell it's running unless I look at the rpm gauge. Only problem I have with the v10 is oil consumption. I have to put a quart in every 2k if I tow a lot, if I baby it maybe every 3k

@snowjammma

8 ай бұрын

At 12 mpg that would of been 20,833 rounded gallon of gas

@BrianBourgeois-

5 ай бұрын

Parents had a limited with the same setup. Excellent vehicle.

@tonychavez2083

4 ай бұрын

These triton 2V non cam phaser motors like conventional 10W40 oil. We use it in all our high mileage motors and they do great. Don’t use that 5W20 crap.

@lilweezy110

Ай бұрын

@@snowjammmayes but as a man that runs his own service truck I’d pay for gas over time in the shop anyday. My truck in the shop means I’m losing money not making money

I am sad that Ford never stuck the V10 in the Mustang with a high cam lobe and 10:1 compression

@conner5611

Жыл бұрын

It'd be cool but its to big of a motor to fit in the car hell even the new 5.0l leaves barely any room.

@imnotusingmyrealname4566

Жыл бұрын

10:1? That's pathetically low for a naturally aspirated engine. For example Mazda's naturally aspirated 2.5L has 14:1 and the turbo has 10.5:1, so still higher than that.

@PaulRudd1941

Жыл бұрын

@@imnotusingmyrealname4566 yeah sure but this thing would have been transplanted around 2005. You're thinking modern engines, not contemporary 2005 compression ratios.

@Iowa599

Жыл бұрын

Or put it in the GT… (like GT40, not the Mustang GT)

@imnotusingmyrealname4566

Жыл бұрын

@@PaulRudd1941 True, engine technology definitely advanced quite a bit since then.😅

US mechanic here. I live in a rural area with lots of ford trucks. The V10 is very reliable where I live, the engine itself is detuned compared to a 5.4 V8. It doesn't blow head gaskets, it doesn't blow exhaust gaskets or crack exhaust manifolds. The spark plugs might get stuck, but I never see V10 Fords in the shop. Not one in over a year.

@alb12345672

Жыл бұрын

6.2L is better though. Have one in my F150! Love to drive it!

@wildcoyote34

Жыл бұрын

must be because they are all in the junk yard ,, the bodies on the trucks fall apart after 10 years too ,,i never did figure out how ford managed to make a truck that rattled so much ,,i've owned 2 of these trucks and even the one i bought that was next to new by the time it had 40K miles it had body rattles and all manner of weird noises like a truck with a million miles .my 50 year old semi truck doesn't rattle and clunk like that piece of crap ford truck did ,,i have a 2019 F350 that so far isn't following that trend

@Sephiroth5200

Жыл бұрын

@@wildcoyote34 The bodies rust out really bad here in Michigan. I know of 4 V10 F-250s here in town and the owners never have engine problems. Everything else around the engine? Problems. Just never the V10.

@wildcoyote34

Жыл бұрын

@@Sephiroth5200 i've had 1 V10 and 2 5.4 trucks and all of them had issues at some point ,, my 00 V10 had the infamous sparkplug problem , and after 90K miles ate it's timing chain guides ,, i never had the 5.4 blow a head gasket but timing chains had them repeatedly ,, spark plugs repeatedly ,,and the nonstop burned out ignition coils ,, the v10 despite having the same coils never burned one out ,,the whole truck however fell apart before the engine or transmission failed ,,the farmer i sold it to in 05 is still driving it today.. it's had most of the body replaced and last time i talked to him he still hadn't had any more engine problems besides the timing chains ,,and the usual mileage related issues like alternators , water pumps and oil leaks ,,and i have yet to see a vehicle of any brand that never had those issues

@The_Fat_Turtle

Жыл бұрын

I've got a 2010 E450 bus with the older 2V 6.8L specifically because they were just a little more reliable than the 3V versions. Ford kept these around just for the bus and rv manufacturers due to how solid they are. It drinks gas but I feel way more comfortable with it up here in Northern Canada than the 6.0L diesel.

If you do a search here on KZread you'll find a couple of guys who have made their own 4-valve heads for the Triton V10 by hacking up some 5.4 4-valve heads from the Aviator/Navigator and welding them together. The goal is 700+hp N/A with 13:1 compression and 8,000rpm redline.

@andyharman3022

Жыл бұрын

Things like that have been going on for decades. Even Chrysler's first prototype V10's were welded up from hacked-up 360 blocks. But don't expect durability from aluminum heads that have been welded together. The heat treat has been ruined, and the material made soft and weak. Any attempt to heat treat back to the original condition will cause warpage, making the head useless.

@dustinontaiyabbi5608

Жыл бұрын

@@andyharman3022 it's gonna be used for a car nothing heavy, and they are doing everything they can to minimize any risks. I've been following them for a while they are taking their time and are doing just about everything right.

@Hawk7886

Жыл бұрын

@@dustinontaiyabbi5608 you don't think vehicles eclipsing a ton and a half are heavy?

@dustinontaiyabbi5608

Жыл бұрын

@@Hawk7886 3000lbs is pretty average for a vehicle. The c4 corvettes are tiny and are still just over 3k lbs

@CoyoteFTW

Жыл бұрын

@@andyharman3022 - that V10 was most complicated turd ever conceived awful design this Ford V10 was mass produced very reliable not a useless relic like the engine you mentioned

They were durable enough that Winnebago used them in some pretty large and heavy RV's and they did fine! In E series vans we routinely saw 280-300K miles with no issues other than occasional chain guides.

@brianb-p6586

4 ай бұрын

They were in every Ford F53/F5D motorhome stripped chassis for over two decades, and for half of that time there were no other brands of Class A motorhome chassis in North America so every brand of gas Class A - not just Winnebago - had one. Chassis gross vehicle weight rating was up to 26,000 pounds.

The most exotic vehicle I've ever ridden in was the V10 Blue Bird school bus that took me to and from high school 😅

@fastinradfordable

Жыл бұрын

That’s what she said

I have 2 of these trucks and it is crazy how no matter what you tow behind it , whether empty or loaded, you get the same 10mpg. I have both a service truck and an excursion.

@adamguzzo94

Жыл бұрын

I get 12-13 with a 20 year old 3/4 ton with 10k on the back.. 10 unloaded is rediculus and why nobody runs these things anymore other than kids who wanna say they've got a V10 like a Lambo and die hard Ford guys.

@jonathonrossebo1783

Жыл бұрын

I guess they don't struggle much.

@TheChrisgralnic

Жыл бұрын

@@adamguzzo94 They are available in big numbers , modular , and reliable . 10 MPG when you consider that the entire truck is 11,500 lbs is not that bad . Also people who run V10 usually charge their customers for fuel . Haulers , mechanics , serviceman . Fuel costs are part of the deal.

@_..-.._..-.._

11 ай бұрын

@@adamguzzo94I don’t believe you get 13 with 10k on the back. No way in hell with gasoline.

@HammerWrench

9 ай бұрын

My 01 Excursion 4x4 gets 15mpg on the highway at 65mph. Tuner, Y pipe, no cat helps a lot. 214k miles.

These are the best sounding engines I have ever heard. I remember when they debuted in the 97 Econoline Vans, my high school baseball team rented one for an out of state tournament, and I couldn't believe how that engine screamed. It sounded like an exotic car

I had one of these V10's, as well as a 460. Absolutely loved them.

4:52 All jokes aside, for an unmodified 12 window bus that thing RIPPED out of that turn

I daily a 2V V10, I absolutely love my F250. Couldn’t ask for a more reliable truck

My dad bought a 2000s f250 V10 the only brand new vehicle he ever bought. And pulled a big rv on many trips, the biggest one was over a month on the road. I won't forget sleeping to the cool engine sound. Awesome video!

Thank you VisioRacer! Really happy the clip of Excursion howling out of the tunnel was included! Love that one!

Ford: you just have to torque the plugs every 50k. Owners: I refuse to do regular maintenance! That’s ridiculous to expect of me! Spark plug number 7 at 100k: adiós ✌️

I have a 2006 F250 V10 with a 6 speed manual and it's a beast of a truck.

@BrownBomber92181

11 ай бұрын

Sweet! I'd love to have one with the ZF-6

my work has an old ford superduty worktruck with the triton v10 in it, it does all it needs to but it blows my mind seeing where people drove busses with them in it with no issues. i will absolutely admit though that the truck at my work has something like 300,000 miles so it could do with a looking into the internals due to the hard life it had there well before i got there.....but i will say, EVEN WITH it being high mileage and honestly abused its whole life, that dang thing is an absolute trooper if i ever did know one. i just wish i had the chance to drive it when it was newer.

I remember seeing that engine mostly on Econoline/E-Series vans than in the trucks, as in my country the vans were a grey-import while the trucks had locally-produced versions and Diesel engines were used more often than gassers.

@dustinontaiyabbi5608

Жыл бұрын

Most of them found in trucks were commercial truck and cab/chassis trucks. My 04 was a cab/chassis and was bought new by a plumbing company. Still pulling fantastic and will hit 250k miles at the end of the month and it's never been cracked open

As a mechanic ive found the 5.4 2v 03+ and the v10 03+ to be extremely reliable engines. 03 was the cylinder head revisement. They all got 9 thread heads and they no longer blew out lol. They would go well into the 350k mile range if maintained. Timing tensioners !! And guides are the only weak link of these engines but we're talking 180k+ before that becomes a threat . I built a 65 mustang coup with a 5.4 2v 9 thread heads i ported , je forged pistons .010 over and mmr forged rods mmr hurricane pump and opg with comp cams s2 came. Home ported my heads and 180 degree exhaust. Gen 1 lightning intake and homemade mid plate for a gt500 supercharged pattern. Vmp gen 3r blower on 18lbs of boost. Made 618 WHP and 781 torque 😂. 2v engines are truly underated AF. Unbelievably reliable engines. Ford did an incredible job with those ... The 3V lol... Well not so much

@rvarsigfusson6163

7 ай бұрын

Nice info on 5.4 and the year of change to better engine..... but I like better the 5.0.

I got 595,000 miles out of my 2002 E450 v10 box truck. 543,000 out of the transmission. Traded it in at 673,000. Not bad for a gas engine going all out most of the time.

I had a Ford 250 with a Triton V10 in it. I think like 2004 2005. I'm old is what this comment is making me realize. Anyway, the only problems I ever had with that truck was when we had to sit in traffic idling it love to overheat. But it could haul a shit ton of weight both in the bed as well as the trailer I pulled and it was effortless. So as long as you didn't ever have to get stuck in traffic, you were all set

@Flies2FLL

Жыл бұрын

If it overheats sitting in traffic then you probably have an air flow issue. That shouldn't happen....

@AA-tb4ff

Жыл бұрын

@@Flies2FLL your right i bet something was up with the fan clutch

@Whats.thissa

Жыл бұрын

Or clogged thermostat or worn water pump impeller from rust and scale wears down the blades on the impeller.🤗🤔😁

@AA-tb4ff

Жыл бұрын

@@Whats.thissa nope fan clutch. if it was any of that other stuff you said it wouldn’t just overheat in traffic sitting. It would overheat all the time. Boom mic drop

@michaelfrench3396

Жыл бұрын

@@Flies2FLL I haven't had it in years. It didn't do it all the time. If it was someone in Philly though, she didn't live traffic

your English has come a very long way these last couple years I gotta say congrats man I didn't realize how much you improved till I clicked a slightly older video and realized I just got used to ur voice

I remember this V10 from the RV's I drove on US roads. This engine was able to accelerate the 7.5 metric ton camper to 60 mph in just 10 seconds.

@mrwhiteinca

Жыл бұрын

Yup

@Assimilator1

Жыл бұрын

That's nuts! 😁

@ThunderBassistJay

Жыл бұрын

​@@Assimilator1 Yes it is, but it comes in handy when traveling through the Rocky Mountains with a stacked fridge, baggage, 100 gallons of water, 50 gallons of gas and some 50 gallons of waste water added to the weight. 😁

@Burden-THE

Жыл бұрын

I've never seen an unloaded short frame f450 do 0-60 in 10 seconds

@flooredford9350

Жыл бұрын

@@Burden-THE we had an old v10 box van with a long rear overhang at my old job with like 5.13 gears that would do smokey burnouts, and if you bounced it up, carry a wheely for 30 feet or more. the v10s have some ass to them. not buying the 10 sec 0-60 either though.

I may be a freak but I have had the 4.6,5.4 and now have a v10. Never have I had a spark plug issue with any of them. The 5.4 cleared 400000 miles and spun a bearing. Still drove it into my shop.

It’s great to hear that these are actually decent engines. I always wondered. Lovely video as always 👍

@davefellhoelter1343

Жыл бұрын

I think they SUCK! spitting plugs, guzzle fuel! pain in the butt! the 460 SUCKed! MORE! fuel.

@wildcoyote34

Жыл бұрын

@@davefellhoelter1343 actually the 460 was much more fuel efficient than the V10 ,, i've owned trucks with both engines ,,and my 460 powered 86 F350 would get 13mpg when not towing and if i drove smart it would get 9 towing my 35ft 5th wheel camper ,, my 99 F-350 i had in 2008 wouldn't get over 11 at any time and pulling the same camper got worse mileage than my peterbilt 379,it's got a 3408B cat 18 liter engine and gets 5.8 mpg towing 50,000 pounds,,,a chevy 454 can get better mileage than the V10 too ,,i ditched all my fords in favor of something easy and cheap to fix an chevy C3500 with a 454 with a carburetor

@davefellhoelter1343

Жыл бұрын

@@wildcoyote34 me too. never had any 460 get better than 8 mpg empty and level. all my V10's got about the same mpg but better power curve, smoother! While LARGER and Heavy

@wildcoyote34

Жыл бұрын

@@davefellhoelter1343 the V10 wasn't bad where power was concerned i just hated it's liking to wind up to the moon , it had just as much pulling power as the 460 ,, the 360 was just like any other big block V8 it produced all it's power below 3500 rpms they weren't built to be fuel efficient ,,, the term NOT A FUEL EFFICIENT VEHICLE was coined to describe any truck with a big block V8 ,the V10 truck i had never broke 6 while towing it would get 10 or so on a long trip where i wasn't towing and i kept the speed under 70 ,,my 460 would average 13 in the same circumstances doing highway cruising at 68 or so ,,my 83 GMC C3500 i have now has a well tuned 454 that makes just shy of 400 horsepower and it averages about 10 when not towing and never goes below 8 and it'll tow my 18,000 pound 5th wheel without breaking a sweat at 70 on the interstate

@davefellhoelter1343

Жыл бұрын

@@wildcoyote34 this is WHY I now own GM's and Toyota's Now days? Had every kinda truck that drives to a work site from the early 80's to now, some mine some others. The best in my stables was a Mopar 318 and 360, second best GM 5.7 or the 8.1 ford 350 about the same with triton. LEAST Fav! is GM 454, Ford V10 or 460 I Could Not Wait to get rid of them! will never own another no matter the deal. had about 6 GM 4.7's over the years, that a decent engine.

I still see plenty of them around so they must be relatively reliable, and they sound so good

Love the vid . . . Is great as always

Im officially jealous i nevwr heard any school buses in Canada with this Engine. It sounds so good!

Seems like the guys that got a good one, really liked them. If you got a bad one, there wasn't a lot good to say about the truck. I always enjoyed hearing them. Great video as always!

@danielcortez8309

Жыл бұрын

I got a bad one. A 2006 F250. At 160,000 mile it developed a knock. Main bearing failure. After having the engine rebuilt, many times it would not start. Replaced the engine management computer. After that, frequently, it would misfire badly. Replaced the plugs and a number of coils. Problems continued with not starting and misfiring. I finally sold it with 180,000 miles.

@Burden-THE

Жыл бұрын

I was pleasured with swapping the 4th engine replacement after only 110000 miles. The 3rd was missing 5 rods when I had to work on it. Terrible service trucks!

@adamguzzo94

Жыл бұрын

Triton never made anything good. Just shit and sightly less shitty shit. These are just shit lol along with the 5.4s. literally no reason to drive one of these dumpsters anymore

very cool episode! :)

My mom had a 2000 Excursion with the 6.8. The only problems it had were it went through coils here and there so we kept a couple in the glove box just in case. It also needed a quart of oil once a month. It had almost 400k miles on it before we got rid of it.

@BrianBourgeois-

7 ай бұрын

The coils kept going out because either y’all were using aftermarket coils or the spark plugs were over gapped and over stressing the coils.

My brother had an '03 Ford F250 with the V10 and it sounded awesome with a Magnaflow exhaust

great video!

Imagine if ford crammed one into the crown vic

My '99 F-350 V-10 with a short exhaust sounded great, you'd swear it was spinning well over 6k even tho it never got that high.

I worked for uhaul 07 to 08 'they had those in just about every Ford 'it was familiar to work on resembles the regular 4.6

Absolutely bullet proof work engines

They were used in a lot of standby generators as well

I've drove a RV and a shuttle bus with the triton v10 and they really make you think you're driving a much smaller vehicle

I have an 03 Excursion with the v10. 154,000 miles and still runs perfect.

UPS package cars on the Ford F59 chassis used this engine up until late 21. I had five in my old fleet, and have one in my current fleet. Absolute beast of an engine. In nearly five years with the first fleet, the only real issues I had was a batch of counterfeit spark plugs, one broken exhaust valve spring, and one at 160k that started having excessive valvetrain noise and misfires. I replaced just the one valve spring, and it was still running fine when I left. The other engine got replaced. The new Ford cars have the 7.3, and while it has more power, the howl of that V10 just can't be beaten. Especially when I "forgot" to put the exhaust back together after replacing the transmission, and "accidentally" went for a test drive with it wide open. Ooops.

I have a 2022 e450 rv fully loaded up and tow a 19' fiberglass boat up Snoqualmie pass at 70mph no problem. It screams up that mountain!

427 V10 Mustang YES PLEASE! another great episode thank you visioracer

It was badass. And a decent amount of Rv's and Postal vans used them and technically still use them

Be an absolute blast to throw one in a Panther platform sedan!

@Build it Yourself has a series on fabricating four valve Dohc heads for this engine. It’s almost done and the whole series is very interesting

@dotlaj

Жыл бұрын

Deboss garage is putting one in a mustang.

@wckdvnmproductions

Жыл бұрын

@@dotlaj the regular SOHC variants have been put in mustangs before but they are rather lacking in aftermarket support so you can't make big power on them sadly. That's why it is uncommon to see them last long as the 4.6 4v and 5.0 are more widely embraced. Hell even the 5.4 4v gets over looked for the same reasons as the V10

a buddy of mine living in canada drove those for work and he said they are the happiest at 3k rpm.

Those engines are very uncommon where I live. It's great to get some information on them. 👍

@adamguzzo94

Жыл бұрын

Your lucky. There all over the place here and you can get one cheap because their giant piles of shit... Useless gas sucking turds

I have had my 2002 F250 4x4 V10 since it was new. Let me just say it is the only Ford I have ever owned. In 188,000 miles it has never failed me. Mine is a work truck usually pulling a loaded trailer or our camper. I change plugs and coils every 60,000 miles and full synthetic oil every 3000 miles. It still looks good and runs great!! So yes the Ford V10 is an excellent engine!!!

The Triton V10 and Ford 460 are among my top favorite engines. The sound of the V10 is my favorite albeit with it being a high RPM engine and a screamer at that, although the low end torque of its predecessor is what makes me favor the 460 slightly more. Both are gas hogs but you can’t beat the sound and power of these engines. I only wish they would have shoehorned the V10 in cars like the limited production Mercury Marauders and mustangs, as this would have certainly made the engine and said cars more competitive versus the weaker 5.4 and 4.6 engines. I’m certain if Ford had learned from the flaws of the 2006 5.4’s implementations and added a correctly functioning VVT system and later direct injection in the 2010’s for vastly improved fuel mileage, the V10 would’ve been an uncontrollable monster that would still be made even today. Nonetheless amazing job on these videos and well done.

@crankychris2

2 ай бұрын

The V-10 6.8 engine was axed for the Marauder because of a gas guzzler tax. Prototype Mercs ran low 14's and trapped 102-105 mph with a 450 hp HO 6.8L. The low torque 5.0 Mach 1 engine proved unsuitable for this heavy car and it was quickly discontinued. Panthers deserved a better end, but that's why Ford is failing.

If the 4.6 L V8 is a "small block", then the 5.4 L and 6.8 L can't be "big block" (as claimed at 1:57), because they share the same bore spacing. The terms "small block" and "big block" don't just refer to displacement. The Ford Modular engine family has a bore spacing of 100 mm, making it a small-block engine design. The deck height does vary (227 mm for the 4.6 L versus 256 mm for the 5.4 L, for instance), but they're all still small-blocks.

ViscioRacer, next do the Ford 300 Inline 6 from the 60's to the late 90's. Sorry I missed your take on the triton V10 it's very satisfying to hear 10 cylinders roll. But take away 4 for a next engine for the take on the inline 6.

Brother, love your videos. The 10 cyl has mixed reviews here but I can tell you they take a beating. The old 460s are fantastic and in the 69-71 Lincoln they were on par with anything Detroit had aside from the ls6 and hemi

@tcmtech7515

Жыл бұрын

Saddly emissions compliance is what neutered them so bad they became worthless. In the end, most were putting out half their capable HP at half their capable fuel mileage in the name of saving the planet/maximizing government taxation theft through excessive fuel consumption.

@peterchristlieb

Жыл бұрын

@@tcmtech7515 Imagine what a 6.9l Benz would have been without pollution control and had it lived long enough to get the 4 speed transmission

@tcmtech7515

Жыл бұрын

@@peterchristlieb Theres all sorts of old-school engines that would walk all over today's high-tech stuff in terms of power, fuel efficiency and durability if it wasn't for emissions compliance.

@peterchristlieb

Жыл бұрын

@@tcmtech7515 absolutely, I’ve said for years, if you put the same brains, hot ignition and fuel injection the LS has on a square port 427 Chevrolet, you’d see 700hp naturally aspirated motors on pump gas

@tcmtech7515

Жыл бұрын

@@peterchristlieb Yep. I used to hang around with the first tech motorheads that were experimenting with that stuff when it first came out and it was amazing what they could do with modern electronics on old-school engines. Some basic head work, a good treatable towing cam or mild performance cam, and a properly designed EFI system were easily able to do 1 HP per cubic inch and walk all over its emissions-compliant twin on power and fuel mileage at the same time and be absolutely bulletproof on any major brand and model of engine back then. What was interesting to me was the guys who had the exhaust gas analyzers claimed they could do all that and stay well within emissions compliance numbers on pump gas too with nothing more than a good catalytic converter. The having to have shit power and fuel mileage to be emissions compliant was just a scam to get the government more tax revenue in any way possible.

At work, we have a great condition example of this engine in a Ford F450 flat deck dually with a manual gearbox. Despite being made in the year 2000, it has less than 30,000kms on it. I LOVE driving that thing.

My work had a Ford F-250 with the V10 engine. I only drove it briefly before we discovered the frame was starting to rust out on it and it was sold off. The best way I can describe it was fun to drive and smooth as butter, but it was incredibly thirsty. The sound of the engine always sounded a bit unusual to me, maybe because I was so used to hearing V8 engines. It had virtually no engine vibrations and was smooth as glass. It had decent power and sounded awesome when under a load. It wasn’t a perfect however. The biggest problem we had was abysmal fuel consumption. It was pretty bad on gas. We’d have to fill up quite frequently and it was costing a lot of money to run it. Sometimes we would rather use the V8 trucks just because it wasn’t so harsh on gas when towing and the power was similar to the V10 anyway. The engine had some problems with the spark plugs as all tritons do. None of them popped out but a few of the plugs were being held in by like 2 threads and the threads were totally mangled. We later had a blown head gasket after the engine overheated when the lower radiator hose blew off. We had to deck the cylinder heads which turned into rebuilding the top end of the engine. Since the cylinder heads were off, we decked the cylinder heads to make them flat and modified the heads by machining our own steel spark plug inserts. We made it so we could use normal spark plugs instead of the crappy two piece spark plugs Ford wanted to use. We pressed the steel inserts into the heads by baking the cylinder head in an oven and using liquid nitrogen on the steel spark plug inserts we machined. It wasn’t easy but it actually worked. We also replaced the exhaust studs because half of them snapped off during disassembly. And after some new head gaskets and new timing chains and some prayers, the engine was running like new. It was a winter project for the crew. But it wasn’t a few years later that we noticed the frame was rusting out pretty bad and we deemed as being unsafe to use. One of the employees bought it from the company and is planning some crazy project with the engine. I really don’t miss that engine since the diesel engines we use now are way more fuel efficient and more powerful.

The EMS service I worked for used Ford ambulances, mixed diesels and V10s. I deployed for “Hurricane” Florence in 2018 aboard one with a V10 that had a bad lifter that was so loud that I thought a pushrod was going to poke a hole though the hood! Surprisingly, it made it to and from the deployment area without incident!

@jeffmiller3150

Жыл бұрын

It doesn't have any pushrods!🤷

@jjeckerm06

Жыл бұрын

@@jeffmiller3150 “ACKSHUALLY”

My Friend has a 2001 F250 with the 6.8 l v10 over 200 000kms , no problems or issues, it is a truck with a truck motor , do not except fuel mileage like an economy car, his truck is rated for 11 mpg while the 5.4 l. V8 is rated for in a similar truck f250 two wheel drive , 13 mpg with the v8, the best part of the v10 he finds the engine can easy pull his trailers a camper , a boat & a utility trailer easily with having the engine work hard like the v8 version of the same truck. Only issue he had was the exhaust bolts. Which we replaced on both sides in his driveway on a weekend, and the bolts are still holding, after at least 5 years.

A friend of mine owns a fleet of V10s. He swears by them and no more diesels. Stainless steel manifold studs are your friend.

Good video. I have one and had a blown head gasket so I got a remanufactured one from Ford. It’s been good.

I had my own mobile fleet repair service for 40 years, I did a lot of diesel work and gas also and there is so many problems with the diesels in the last 10 years and the extreme cost of diesel fuel and maintenance cost I suggested to my household moving customer to get an F 700 moving truck with the V10 triton. These trucks run mostly local and generally only get 10 to 12 thousand miles a year use, even though they get a little less fuel economy the overall operational costs are a lot cheaper plus they are a lot cheaper to buy, sometimes as much as 15 to 20 thousand dollars cheaper. They have had it 2 years and are happy so far.

The only problem with it is that it was based on the 5.4 and so prone to a few of the things the 5.4 was like the spark plug. A lot of the modular engines are good. With the 4.6 you just torque the spark plugs to the correct spec once and they only come out if you dont realize theres a torque spec. A 4.6 derived 5.8 could have been as unkillable as the 4.6 if done right.

@BrownBomber92181

11 ай бұрын

Its based off of the 5.4, but the V-10 can take much more abuse and has proven to last much longer. Thats because it runs so smooth with no vibrations thanks to the split pin crank that allows for 72° firing and a balance shaft.

we a had a triton v10 f250 super duty for awhile, thing got 6.5 mpg and we took it from SE ohio to myrtle beach SC hauling a 30 foot camper. it was a 12 hour drive due to fuel stops and an hour nap because we left at 9 at night

I want one. No theirs not a ton of after market off-shelf parts for this motor, but if you peak around on YT and the internetz abroad, you'll find some unique builds utilizing this V10, and the latest from an up and coming channel here on YT where these guys have invested a ton of R&D on converting a stock SOHC to a DOHC to mimic the mule motors Ford had in their black ops development back in the late 90's/early 00's for their re-release Cobra that never became more than an auto show piece. Note* as far as the issues described, the modular V8's also shared some of these design flaws.

Have a triton in my 32 foot motor coach,,,ITS AWESOME ,!

Must be 18° crank pin offset for a 90° V10 and not 28° right?

There’s a team of young engineers that made the svt v10 come to life.

@everrybody

7 ай бұрын

"Build it Yourself" youtube channel engine is running now even

If I remember correctly these are used to power center pivot irrigation units in the Midwest.

@ryanwiese5280

Жыл бұрын

They use whatever they can get cheap. I've seen a huge variety of them and setups. Someone had a 500 cadillac running the irrigation pumps.

I see the V10 frequently on gen sets, and I consider it a new engine to the game even though it's been in use for probably 15yrs. Time will tell if it becomes as loved as the 300-6(lsg649) and 2.3-4(lsg423) engines are in this field. I'm not a fan of the 4.2 v6 they used to replace the 300 but it seems to work ok, I haven't seen many issues in those.

@_..-.._..-.._

11 ай бұрын

The 4.2 was decent, not a workhorse like the 4.9, but it was based on the ford 3.8 v6 that was a copy of GM’s 3800

I have seen the V10’s powering propane fueled household generators! That would take a 800 gal in ground tank to run the generator for a month, in an all electric home, with 3,600 sq Ft. On the coast of Massachusetts in Feb. !

I’ve got a v10 Ford Excursion. Love my v10s.

awesome engines, I just did a cam in one. Those tritons are so easy to work on, in a pickup anyways

@fastinradfordable

Жыл бұрын

Maybe you misunderstand the word…. ‘Easy…’

@780brando

Жыл бұрын

@@fastinradfordable well alot easier than most new vehicles

@Burden-THE

Жыл бұрын

I would love to hear an aggressive cam in the 6.8!

I can't say i like one of the big 3 cause all of them have some really sweet cars and trucks that are awesome.

3:11 triton version 10 would have been great with dual overhead cams and variable valve timing

Theres a guy with a Fox chassis 6.8 running with bike carb itbs. He put down 344whp, 420,ft/lbs to the tire with stock 2v heads cams and exhaust manifolds. Very stout low revvers that sound crazy with true duals.

@adamguzzo94

Жыл бұрын

What a turd...

@madmod

Жыл бұрын

@@adamguzzo94 🤡

They sound nice but i am amazed they still make such massive fuel guzzling gas engines!

I have two e 350 v10 vans and they both tow 10000+ lbs excavators without hesitation, only downside is the gas consumption but reliability, power and simplicity of this motor is impressive.

F-250 owner here. The 2v v-10 with PI heads is super reliable. In 2019 went from the 2000 super-duty CC to a nee 2019 alumaduty CCLB with the 6.2. Both are amazing trucks. The old V-10 is relegated to taking trash to the dump and the 6.2 tows the 10,000 lb trailers now. The 6.2 has more power and is one to two mpg more efficient across the board.

I love my 6.8 2v. Its a very Strong engine even at 230k miles. I have a 8500lbs travel trailer that i tow regularly with it. I've towed the same trailer with my sister's '19 Ram with the 6.4 v8 and it's just more comfortable with the v10. It cruises and doesn't require alot of throttle input. The 6.4 is too high strung wants to do 80 and suck fuel. Hill climbs with the v10 are uneventful. Gear it down let pull at 3500rpms. The v8s scream up the hills at 5 and 6k. I wish the v10 would've stuck around to get VVT and higher flowing heads, etc. These were the gas equivalent of diesels of the same period.

These are very good engines. Super reliable, easy to work on, and good power for the displacement. The biggest drawback is the fuel economy, you get 10mpg no matter what. Also the 2 valve versions had spark plug issues, but we don't talk about that.

@adamguzzo94

Жыл бұрын

Their underpowered as fuck for a 6.8 liter V10 what are you talking about? And they sucked fuel on top of it. These things are useless

@Mighty-Quinn

Жыл бұрын

@@adamguzzo94 The 6.4 diesel makes 350hp and 650 lb/ft of torque at 2000 rpm. The late model of 7.3 Powerstroke (2002-2003) made 275hp and 525 lb/ft of torque at 2800 and 1600 rpm, respectively. The 6.8 V10 makes 350hp at 4000rpm, and 460 lb/ft of torque at 3000 rpm. The late model 460 V8 made 250hp and 400 lb/ft of torque, at around 4400 and 2600 rpm, respectively. The new 7.3 "Godzilla" V8 has power outputs listed at 430hp and 475lb/ft of torque, at 5500 and 4000 rpm, respectively. Now yes, this is diesel vs gas, I know that. My point here is that for the displacement, fuel type, and rpm range, the V10 is not bad on power. Does it suck fuel? Oh yeah, no doubt. But power for displacement is not bad at all, especially considering it's predecessor (the 460 V8) only made 250hp and 400 lb/ft of torque. Also comparing it to the 7.3 diesel (275hp and 520 lb/ft) and the new 7.3 gas (430 hp and 475 lb/ft), the V10 is still arguably better in terms of power output, given the displacement. I'll also note that the 7.3 gas has a slightly worse fuel economy rating than the V10. In reality it's probably about the same. Even the 6.0 LS from Chevy only makes 300hp at 4400rpm, and only 360 lb/ft of torque at 4000rpm. And that's a 6.0! Torque is what matters when you're pulling anyhow, especially in a pickup. And the V10 puts out. I will grant you that the 4 speed automatic transmission does not help with fuel economy or speed, but in terms of power? It's not that bad, especially compared to other engines.

@adamguzzo94

Жыл бұрын

@@Mighty-Quinn I've had over 10k on the back of my 6.0 2500 HD and it pulls it like it's barely there.. and I get about 10-13 mpg.. the power figures on these motors are nonsense.. friend lives on a dirt road and his neighbor has a 09.. talked about how bad ass it is and it will barely bust the tires loose on gravel and his is actually half way taken care of and he complains constantly about his 8-10 mpg.. I've seen it pull his construction trailer and for 450 ft pounds I could have stomped it pulling a loaded car hauler.. so either their over rated as hell or I'm putting out way more than the 350 and 375 ft pounds I though I had.. and the excursions that came with them ain't pulling shit. Could barely pull themselves without needing a direct hookup to BP

I had owned a few. I have always had good luck with them.

Same engine in Saleen as in Cobra? Got to take an 01' (?) Saleen around the block via the e-way. Cooked down the ramp and was doin' 120+ in third at under 4 grand then got off. Torque steer jumped across the lane of an impala at a green. Rookie 😃 Excursion had a supercharger they'd slap-on with a scooped hood maybe the cobra one too. I loved those bumpers.. Neighbor's daughter came to visit and parked right on the street, like almost blocking it, she wasn't close to the gravel. Anyhow.. Backed-out with that excursion and hit her intrepid and started pushing it off the road. Didn't notice till her tire popped from the quarterpanel going through it. She cried a lot. Spidered her windshield and the hood was pushing the other quaterpanel off the other side. I wasn't going slow obviously, but not fast either. Just leaving normal. Thing was a beast. Hardly scratched the bumper.

The early 2000s were the peak of cars

Woooooo my car was in the video right at the end my Capri with an itb'd v10

I would've imagine if Fors made a 6.8L DOHC 40V Triton V10 and that thing would've made 500 HP NA.

@HammerWrench

9 ай бұрын

@buildityourself has created a 40v head for their V10 and will install it in a 2017 Continental.

@CJColvin

9 ай бұрын

@HammerWrench Awesome, where can I find that?

The dohc v10 they had in the test mule 2000 mustang was Not 427cid it was 351cid.

I once drove an F-750 moving truck with this engine in it. It looked so tiny sitting in that commercial chassis frame.

Just sold my 1099 F350 4x4 to a friend. It had over 330,000 miles on it and still didn't use more than a quart of oil between oil changes. Never added any. Just changed at 5k

There's a guy in Southeast Louisiana that has a V10 Ford Excursion, which has over 400000 miles on it

We have an E450 V10 cube van at work and I much prefer it to the E350 6.2 V8 we have. Both 5 speeds. Runs a lot smoother and quieter, maybe slower but that’s probably the weight of the van. Is it a hot rod engine? Of course not, but for getting 6 tons of vehicle and plumbing tools around, there’s not much else I prefer. A diesel would not really provide anything more, it has enough torque and I’m not racing people in a company vehicle. Haven’t tried the 7.3 yet, but I hope it’s smoother than the 6.2 when we need another van.

@mclarenCR

5 ай бұрын

a diesel engine would double the torque and gas mileage, tho

@TheLazerTank

5 ай бұрын

@@mclarenCR I'm really only considering gas motors for the vans, we have a diesel super duty for towing when we need that, but for day to day operations, the gas motors have more than enough torque for what we need them for. The gas motors are still cheaper to operate when considering maintenance and initial cost. Upgrading to an f-series cutaway would still cost more than an e-series without including the diesel motor, and Ford stopped selling the e-series with a diesel over a decade ago. That said, the video is addressing the gas V10, which is why my initial comment from 10 months ago was reflecting the benefits of that motor over the 6.2 gasser, and wondering about it's current replacement, the 7.3. I merely mentioned the diesel because I wanted to get it out there that it was beyond our needs for the vans.

@mclarenCR

4 ай бұрын

@@TheLazerTank good luck, very nice trucks dude

Gud vid 👌👍🔥

Oh, you say they fixed the plugs on the 2005+ models and then showed me THOSE plugs?? I'm a mechanic in North America and I've gotten all those plugs out of an engine (a 5.4 admittedly) and not everyone can say that. I'm only poking fun, I love your stuff

Ford built single overhead cam engines in the 60's and double overhead cam 4 valve per cylinder engines during WW2 to be used in military tanks. Ford didn't need to borrow from European or Japanese manufacturers, they already had the technology.

I have an 04 2v f350 v10 literally the most reliable vehicle ive owned. Ive put 40k+ miles when i bought it with 211k miles and it hasn't left me stranded yet And it hasnt pulled everything ive hooked it up to. It can definitely tow more than 15k on a gooseneck theres a guy here on youtube who oulled 20k of hay with his f250 v10

cheers!!

Despite this probably being the biggest gasoline powered production engine Ford made at the time, my 4.2L V6 had bigger individual cylinder displacement and probably the biggest individual cylinder displacement of any gasoline powered Ford production engine of the time. That's probably the only thing I can brag about my truck for, other than getting to shift the gears manually.

There was once a time when the spark plugs from the Ford Triton engines were the leading cause of flat tires across the country.........

@ProjectFairmont

Жыл бұрын

Yea, you would know. Except you don’t.

How about a video on Gasser HotRods ? Just asking because "Gas Guzzler" in the thumbnail of this video reminded me of that i haven't seen a good video explaining what makes a gasser a gasser.

Matthew Terry beat me to the punch! I'm surprised that Ford didn't offer a V10 mustang or some other sports model with a V10! Maybe a twin-turbo V10 in the GT???

I love my triton. V10.

I drove a box truck with the triton v10 in it at work and it had a ton of power. It was new at the time so we never had any reliability issues. That being said, it never sounded good and the copious idle time we put on it probably wasn’t great for the engine.