It's ALWAYS good to have a sparky as a really good friend, no matter what country you live in!

@crakkbone8473

2 жыл бұрын

You mean a welder?

@crakkbone8473

2 жыл бұрын

No you mean an electrician

@corinneqofhearts5069

2 жыл бұрын

@@crakkbone8473 either way you would have been correct, tbh.

His room mate is having trouble with their Subaru.

@StillIt

3 жыл бұрын

Hahahah can't work out why it's over heating!

@jttech44

3 жыл бұрын

@@StillIt It's a subie, probably just a head gasket

@scootermcgooginhime2464

3 жыл бұрын

Definitely a head gasket 😂😂

@ailkenllib

3 жыл бұрын

Great video. Love his coolant setup.

@Muza1616

3 жыл бұрын

Not surprised its a subaru

I'm sitting over here damn near drooling, hahaha! My jealousy is embarrassing! Very cool video. Great to see the whole process:-)

@StillIt

3 жыл бұрын

It's a sweet set-up man

@BeardedBored

3 жыл бұрын

@@StillIt Definitely worthy of my envy:-)

@silveraven1

3 жыл бұрын

Hahaha, Bearded..... was thinking the same thing

@silveraven1

3 жыл бұрын

So the big question is: Is Jesse getting one of these and if not why?

@stocken

3 жыл бұрын

@@StillIt Thanks for the show. I'm just like so many others here on your channel drooling over that setup. I'm trying to start a small destillery here in Sweden. So, is there any chance of you letting us know the manufacturer of the setup?

A follow-up video would be really nice. I am curious how the thing does after 2 years.

@dudetapedtoafridge3073

5 ай бұрын

Probably just fine. The agitator might ware down a little bit but that can easily be replaced for a couple hundred. There isn't much that can go wrong with stationary welded/solderd sheet metal

I'm totally new to Stilling... got my wife a still for her birthday ( yes, really for her! lol )... we didn't have a clue about any of this and so I got a cheap $260 Chinese still from Amazon because hey, I don't know if we'll even enjoy it!, purchased some turbo yeast, made a sugar wash and a few days later made our first Spirits. While not an ideal setup, it was fun and a fantastic way to become a beginner and get results that are drinkable. Love starting to go through your videos, educational and entertaining.

I like the longer, more in depth video. Great job!

Great video, would definitely be cool to do a series on still building experiences from different price points and perhaps some number 8 wire approaches as well. Good job Jesse keep em coming!👌👌

I love the look of the home built stills that people make, but I tell you what that is one sweet setup.

Lucky man indeed , let’s face it people spend many times more on jet skis , boats , motorcycles, ect it’s his hobby , very keen to see your follow up vid in the future , cheers jesse tip top work as usual 🥃👌🏼

the more local shops who "make similar product" want 4x the money... I can't blame anyone who is trying to save while still getting quality....

@alexb5766

3 жыл бұрын

Love the USA got same still with 28g boiler no oil Jacket and no electric controller for low 2k

All I can say is " I Love It " and now he has a still that every time he uses it he will get better . All so many years of enjoying it .

I built my 1st still recently after 5 months of watching Jamie and a couple others. I decided on a 35L Digiboil, a generic copper alembic dome, SS 2" column with reflux cond. and main cond. with a sight glass and digital thermometer all in tri-clamp. I added a gin basket at the top and a SS basket inside the boiler for on-fruit/grain distilling. I picked up a Brewzilla heat wrap as well. I sourced the parts from whoever had the part I wanted cheapest. Most of the 2" column parts are all from China. The SS basket is for an 8qt. Instapot. I set up the main cond. cooling to run off a hand made garden hose adapter with shut off valve for flow control. The reflux cooling is a separate 1/4" system with a pond pump in a big bucket. All together about $800. I can use it to make almost anything. I hope this helps other with build ideas.

Always enjoy watching your channel!! I have learned heaps !!!

I've been running a 30L china special for the last 6 years. It's stood up to aaaalot of use. I've averaged a run per week for those 6 years and the only failure has been a brass retaining nut that secures the pot-mounted thermometer. It simply disintegrated at about 3 years. Replaced for 50 cents. Guys, don't buy the cheapest of the Chinese products but their mid->upper range stills are a heckuva value. You can spend more on "made in XXXXX" if you need the support but don't kid yourselves. Most of the components in that gear are from the far east regardless.

@GrantMcWilliams

9 ай бұрын

"Most of the components in that gear are from the far east regardless." That is the reality. You see a lot of fear based on racial stereotypes in these threads about stuff being built in China so people buy "Made in America" or "Made in XXXX" and those are just companies selling you stuff made in China anyway. I went down a Coffee rabbit hole and spent quite a lot on espresso makers and grinders and at this point my entire setup is made in China. China has because a technological and manufacturing powerhouse, not just a country making cheap knock-offs. It will take a while for people's perceptions to catch up.

Awesome Jesse, Happened on this video and was so surprised to see my friend James showing off his new Still. He never does anything by halves. Cheers

I love it! What a beautiful still. Here in the U.S.A. we can't play like you folks. If the thing works as well is it looks...I'm really glad for the man. I just run a 30L copper pot still. I have no real drinking buddies around here so I don't require a nice still like that. Great video! Cheers!

For that pump, as long as you control it on the discharge side and have fittings that will hold 20-30 psi, you can completely stop flow and not hurt anything. Gotta be on the discharge side though, control flow on the suck side and you'll cavitate. Centrifugal pumps will just sit there and spin with the fluid, not positive displacement like and piston pump that makes a solid seal on discharge and needs relief valve like you're average garage air compressor. But bypassing the extra probably helps with cooling though. Thanks for all the videos!

Love your set up so much I built almost the same keg. First run at expected 15% bout 2 gallon. Ran perfect but at 2 gallon it was still at 60%... Thanks and be safe

I also operate a Chinese still. Not quite as spanky as that one but what I like most about it is using the boiler for mashing, fermenting and distilling. All OK for a hobby based op. No complaints about quality.

Putting together my still from Oak Stills. 26 gallon. Great quality!!! I’ve probably never been happier with a product for the money.

I also bought a 4 inch coloumn and a dephlegmator from Oak stills. All looked good but the dephlegmator sensor was put to measure the water temperature instead of measuring the steam temperature which makes it a lot harder to run properly so I had to rebuild that a bit. And also the sensor didn't have any gasket or option to add it so it was leaking quite a lot. But the craftmanship sure looks nice.

I did "cleaning" for start ups or rework on FDA food and Pharm stills and posses piping, run Tri Sodium Phosphate(TSP) at steam temps, low% to water (1tbs per gal) PH about 10 or 11. Gets rid of any oils and others used in manufacturing or shipping. Neutralize with Citric/Ascorbic or vinegar over board. Then run with your acid of choice, overboard, rinse, and ready to go! Works good on ammo cleaning too. Thanks for the info guys!

Manifold is for a pressure release valve and pressure gauge. Can be found on there EBay page

@StillIt

3 жыл бұрын

Interesting, internet detective ftw!!

@expattyNZ

3 жыл бұрын

Cheers! I will research it.

Me and a mate are going through this exact process ATM. This is bloody great!

Hi I’m new to your group. I’m happy to say I purchased the same unit 3 days before this video was published . 😀

A really good look at an area that I hope to get to in a year or so. Thanks mate.

The "Extra" 3 to 1 manifold is for a pressure gauge and a Over Pressure valve, OPV. You mount it on a 2in on the boil pot.

@iceman77706

3 жыл бұрын

We have these at the stills at work. It’s gotta be a safety manifold, usually with a pressure gauge, pressure release valve, and not sure what the third opening would be for...

@mverick160

3 жыл бұрын

@@iceman77706 The ones I saw running the third was always blocked off. In a still that has a control system youd have another gauge to the computer controller in the third one.

Definitely Want to see cheaper stills being made. Thats a huge part of the craft, making gold out of air. Making something out of what u have on hand or for as little but as practical as possible. Yes, please do more videos, maybe feature ones idea or still each month. Or a series when they come available to you to interview and then share with us. GREAT IDEA!!!

@gsekse

Жыл бұрын

Well... if you really want a cheap still, watch this: kzread.info/dash/bejne/hZqDrphpc9asabg.html

New still day is always a great day!

The gaskets in column must fitet properly and it must have a puzz for a bublle plate. Thats to avoid leaking. My one is only 50l boiler but it's works right out of a box. Good luck guys! Congratulations for a nice buy!

Wow, that all looks phenomenal!

I was looking at a similar un-jacketed still from milehigh in the US. Perfect timing for the video.

@jasonpowell8582

3 жыл бұрын

I have the 8 gallon from Mile High, excellent quality gear, good service, still way more expensive that I could have brought from China. Slight pang of buyers remorse.

@warrencourt7938

3 жыл бұрын

@@jasonpowell8582 don't have buyers remorse. From what I have read about milehigh, they are in the business of providing the best quality they can. It probably far exceeds what is needed, but you have the best. Enjoy what you have and slumber in the comfort of having something special! There are more expensive options I'm sure.

@warrencourt7938

3 жыл бұрын

I have been inspired by the still it posts, and those of Barley and Hops, Bearded and Bored too. So much so I have enrolled on a course to look at setting up a legitimate business in the UK to progress my interest to a business. Being in the same job for 15 years with all the uncertainty the last year has brought has made me think about a new avenue. Bless Jesse, George and the Bearded champ for giving me the option to progress to the next step. I may not proceed, but I'll find out what I decide soon.

You need a globe valve if you want to throttle flow, to keep the valve from washing out. I can't imagine it would be a real-world problem with low-pressure water though more of a high-pressure thing. That's what we use in oil and gas applications.

Sweet unboxing video!

enjoy watching three guys play with a great new toy

Yes I would love to see some lower end stills and how to save money we all try to save if we can. And when we can.

Awesome to see! I've just bought myself a column from the exact same company. Very impressed with their customer service. Quality isn't the best but should work well. Ended up with a 4 inch, 6 plate borosilicate glass column. Has a 20 inch packed section before the dephlegmator. Running 2x2200w elements in a cut an shut double keg boiler. Maiden voyage in less than two weeks with good old tpw. Should step my shed game up!

@StillIt

3 жыл бұрын

Oh man. That sounds epic!

@nathanielcatsicas9792

3 жыл бұрын

You got a way to share pics? Would gladly keep you updated on it brother!

@markeltom224

3 жыл бұрын

Hey Nathaniel, I just go the same one. Shoot me an email on markeltom@gmail.com - keen to know how you got on!

If its Jacketed, the more economical route is to use water in the jacket, fill above the heat elemetns, to where the lowest check valve is at. The high density steam is is more efficient than a liquid bath bain marie. Additionally its also more responsive to changes in heat adjustments.

@pero2727

3 жыл бұрын

That will create very low density steam. High density steam is what you have in powerplants where the vapor is so dense it's damn near 1kg/L You need a very high pressure vessel if you want to hold the high density steam and the fact that the still is robbing the jacket of so much heat and there is only a few kW of power to produce that steam there will never be anything other than just a very very low density steam in this setup.

@hypnopooper6252

3 жыл бұрын

I run a 150liter jacketed boiler similar to this one, trust me the jacket with enough water to keep the 2 5500 watt elements submerged with steam in the jacket is more than adequate to boil the mash in this guy's boiler. There is no need for oil or glycol, that just adds unnecessary costs to running you still. Maybe its not high pressure, but the steam itself is very dense and will boil the mash to 212F very easily.

@pero2727

3 жыл бұрын

@@hypnopooper6252 Indeed! However what you have is not high density steam. High density steam is wet steam above 10 bar of pressure. I doubt your jacket can hold even 2 bar. It most probably is vented to atmosphere.

@BrazilSaint

3 жыл бұрын

Seconded on this - my jacketed boiler works way better when not full of water. I’ve not thought about using Glycol before - I would be interested to see sone stats on how that higher boiling point impact on overall times.

It would make a kick-ass Lamp or Bong! Best use of Chinesium that I've seen!

Great Video. Very well made and i really like that you people from the trades to review!! The video came at the right time... i was thinking of buying one, seems like there is some more planning and banking to do.. ;) cheers thx

Great video makes me feel a little more confident I have a still coming from China 55 gallon they customized it for me it has a 6-in column a 6-in whiskey helmet and a 6 inch pot still so I can go between two different units it's not jacketed it does have an agitator I'm not using electric elements I'm doing propane because this will be used in West Africa. Love watching you and your adventures I've built most all of my stills myself pot still reflux still and I just completed my first vacuum still which was a real eye opener

I hope so cause I already did. bought the same column but I'm not ready for the jacketed pot yet. bought the same control box but they also offer with a PID. No customs fees in the US so no hidden fees there. Don't know if it did at the time this was shot but it clearly states on their website that the control box doesn't include any wiring from mains or to the elements so no surprises for me there. I already have a 60 amp welder circuit and am familiar with wiring the elements so I'll be good to go. Unfortunately I am not in the US at the moment so I won't be able to report on quality until May. I am encouraged by the findings of your friend Dana. Thanks this was a great video. I had seen a few reviews on other channels but none really looking in depth at the quality workmanship like yours.

@MrJhchrist

3 жыл бұрын

PID's are inherrently flawed for distilling, please do a few searches maybe on homedistiller or another reputable source. They are only promoted by people lacking a basic understanding of how distillation works. Simple power or voltage regulation works perfectly, but trying to control that process based on a thermoprobe is a massive fail.

@bookie60

3 жыл бұрын

@@MrJhchrist I have done some research on the use of PIDs. I intend to also use my controller for mashing and boiling on a separate vessel which is why I chose a PID. It is my understanding I can use it in manual mode which is basically like looking at a digital thermometer and making power adjustments with that readout as a reference. I'm not a beginner and I have mashed boiled and distilled with manual control as well as direct fire propane before. I decided I would like to try PID and if it doesn't work out as expected the price difference is minimal in the grand scheme of things and will be very easy/cheap to retrofit.

@MrJhchrist

3 жыл бұрын

@@bookie60 Right on. I think it's important to make the distinction though as "manual mode" literally has nothing to do with Proportional-Integral-Derivative control. While some PID controllers do allow for a manual power control, that is a completely different thing and any random newb reading our comments should hear that. Especially since a few very inexperienced distillers have fairly large platform on YT and also happen to sell PID controllers. Actual PID control is great for mashing, terrible for controlling a still boiler where the boiling point inherently varies from batch to batch as well as throughout every run. But by all means if a PID controller also offers power control then it can be used for boilers as well as mashing (or fermenting, or sous vide etc). Cheers

@chrishayes4006

3 жыл бұрын

I don't really give a shit how some random noob interprets my random youtube comment. I don't really think I have a burden of responsibility here. Especially when George over at barley and hops (who by the way seems to have a fairly good understanding of the basic principles of distillation) is making whole videos about how great pids are. My original comment only barely mentioned the fact that Oak Stills controller is also offered with a pid. And I only mentioned it because some people might want one and they don't list it on their website. Should have known I would get scolded by some forum dad. You know on second thought I'm gonna run in full PID mode and leave my still unattended and see if the garage blows up or if it makes pure methanol and I go blind.

Yes, I am jealous too, in the nicest of ways! But that's a big bucket of money, albeit for a very large professional bit of kit, which tends to make me think, as a few have mentioned already, that James might have some difficulty in showing that it is solely for his personal use/hobby. Finally, the "journey" that many of us take in getting to a useable, and personal, still is one that James seemed to have bypassed. Many of us prefer the "Jesse" method, i.e. buy stuff, get stuff made, discover better ways to do stuff by failing at some etc. etc. Overall, more power to you James and good luck with it all 👍 The only downside, which I must mention, is that it's a crying shame you couldn't get NZ made product(s) to fulfil your needs 🙁

Hey Jesse and James, I'm hoping you guys could do a video on how to run something like this. I've had thoughts on getting something like this as my mate from lazy dayz brewing has a bubble plate setup from oakstills also and it's a real good quality setup. Thanks for the video guys

It looks like that Tee is to add PRV and other things, something similar is under Distillation Equipment's on their website.

Y'all have the most legit shirts. Respect from an old school moonshiner in the states.

Man, those kids in China are getting pretty good with a TIG welder haha. Just playing. Great Video

That odd bit of "manifold" that you found @7:13 is part of the pressure relief valve system.

My 1,000 phone was made in China. It’s pretty nice. Better than any phones made in America

Nice video, Nice still. Looking forward to a follow up on this still.

Thanks again gentlemen for the video. So my question is can I or should I us a 50L boiler with this setup or not?

WOW from a 25L pot still to a monster, definitely invested in it now. Still looks great! Any recommendations to upgrade from a T500 without breaking the bank?

Plum brandy - sieve the seeds out first before charging the boiler, using a 6 mm sieve. Otherwise mill the fruit and make a puree for fermenting. Even with a spherical bottom kettle, the plum pits clog up a 2 inch TC port and ball valve. Nice work.

@horrorhotel1999

Жыл бұрын

Breaking up all the seeds in your plums before mashing or even distillation will definitely put you far over any threshold for cyanamide which any country considers "safe" or you'll have to end your run a LOT earlier, and even then you're kind of pushing it. There are drum based sieve machines which will remove the seeds from stone fruits without damaging them, but they are often either very big or very expensive bits of kit, sometimes both. The most compact one I could find is the robot coupe c80, but if you can't find one second-hand, it really is too expensive to buy new. A better solution is to allow for backpurging on the outlet so you can dislodge stones if they do get stuck. That way, a 2" TC port will be able to handle almost anything besides the more stubborn grappa mashes, though it does use more water and creates more backset. Depending on your strategy of elimination that might be a bigger issue than clogging though.

@GrantMcEwing

Жыл бұрын

@@horrorhotel1999 We used an apricot mill to separate out the pits. The mill works better with the varieties that have smaller pits.

Brilliant video, that kit looks as good as seven of nine does in Star Trek voyager

OMG Luv his tee shirt! - > "New Zealand Distance riders!...are we there yet?" lol 😂 another awesome video...Kia Kaha! ❤ from ChCh

@StillIt

3 жыл бұрын

Chur bro! Yeah James deserves that shirt, unlike me. Hardly know one end of a bike from the other haha

I got a column from distillex yet to use as I welded the rest of my still myself I was very impressed for what I paid

You guys are competent cobbers. If you pick up an older dehumidifier you can easily convert it to a circulating ice water source by gently bending the condenser down into the collection tub. Add some insulation, a pump, and hoses and you have a device with one third to one half of the footprint of a freezer. It is not as pretty as your still, but, usually cheap at yard sales and thrift shops. Most folks ran the appliance around the clock, then barked at the power bill. Converted, the collector is a block of ice after 20 minutes and lasts for hours so add a timer or thermal controlled on off switch and the cost of a run is minimal. I chose the thermal method.

Please do more reviews of similar built stills

Hi there. Greetings from Latvia. Been watching your videos and since then upgraded my still from 15 L to 45 L and a 2" DIY cooper collumn with reflux. My question is what is the max ABV of this still? Because i can get 87 % only with reflux and some cooper wire balls stufed into the column. Thanx fore the videos. Lots of intersting info from YOU.

I also have a still from aliexpress and it's the best one i have, distillex has the best stills and parts!

@robertfontaine3650

3 жыл бұрын

The only problem with distillex is DHL for us small buyers. 40$ parts with 90$ shipping charges.

To get that kind of still for that price, wow. If it performs as well as it looks, that'll make his distillations so much easier, more precise, and faster. He's going to absolutely love having that little pot at the drain for his specific gravity readings, since it's just another means of confirming that your distillate is coming over at the rate you want it with the separation from the parent solution that you're looking for, so you can adjust your reflux on the fly until it behaves how you like. Such a cool piece of kit for the money.

What a great lookin rig!

Could you get the end of a wet dry shop vac down to the bottom of the pot to remove stones and whatever else gets stuck on the flat bottom?

Got a 53 gallon w/6” column from mile high distilling it’s amazing

@StillIt

3 жыл бұрын

Nice

@keithfisher756

3 жыл бұрын

How much was it?

@charlesschmidtke8427

3 жыл бұрын

Tots with controller and pumps ect I’m 8500 in. But we are starting a micro distillery.

@robertfontaine3650

3 жыл бұрын

@@charlesschmidtke8427 Are the commercial controllers worth having for a hobbyiest? SCR or even PID with a soldering iron seem like enough for a tended still. Ground Fault circuit is the only part you need to buy that is expensive.

@thomasa5619

3 жыл бұрын

@@robertfontaine3650 what do you mean by “ground fault circuit”? You mean getting an electrician to install GFCI protection?

Love your channel! Quick question. Looking some 200L (52 Gal) equipment. Can you please recommend brands?

I got one and it's very nice, just want to update with fals bottom and build up a couple of sections.

I am new to the craft but I can't shake the feeling that I will always love my setup because I built it mid lockdown with what I had. I converted an urn into a still and have been tweaking it ever since for the love of it. No agitator built in but it cost around 2000 ZAR (South African Rand). But one day I might buy a beast like this.

@StillIt

3 жыл бұрын

I can totally agree with this. I still love my ccvm / pot / plate still. It really comes down to the boiler with this thing. I think beat solution is build everything else and buy a potnin a lot of ways

@lank_asif

3 жыл бұрын

@@StillIt Nothing to really respond with brov, Ii just wanted to say that you're a legend and You're channel was a huge motivator for me getting into this craft. Ii knew I could make ethanol, but you gave me the confidence to produce adequate booze lol. Genuine thanks (even though ya from the wrong side of rugby hahaha #SA) you awesome dude!!!!!

@lank_asif

3 жыл бұрын

My keyboard just fucked out. I trust you'll decipher my message. It's difficult to pretend that I screwed up "I" at least twice and somehow squeezed a "you're" in there where a "your" shoulda gone hahahaha. But then put "you" where I should've put "you're".... I give up hahaha

Is the Manifold to act as a "spirit safe" separator for distillate off the condenser? (Eg:Foreshore/Spirit cut/Feints Separation into different vessels)

I bought a still from Oak a few years ago, although a lot cheaper version. 100ltr boiler 4” x 4 plates. Also got the control box. Cheap as $1,600 USD delivered. A few issues, the controls box was way over sized, the plates leak a bit, just need tap and tighten as u go. Seeing the jacketed boiler makes me think it’s time for an upgrade! Made heaps of booze, gin, whiskey, rum. I’m the most popular bloke in my street.

For those interested, it's not listed on their website but they also sell their temperature control box with a PID.

How is still working after 4 months of use ?is it holding up? I am thinking of buying one😁

Damn!!! Sweet. DIY Guys are DIY guys anywhere in the world. I want a 200L still to do a big barrel in 1 run.

@robertfontaine3650

3 жыл бұрын

You could go with 3 gallon barrel or even a bain marie then 40 gallon brute bucket and a beer keg still will fill 3 gallons. 200l stills are always expensive and jacketed is double that.

That thing is gorgeous.

@StillIt

3 жыл бұрын

Sexy all right ;)

Thanks Jesse, another great vid. James..Congratulations! A beauty. Have you named her yet? What will be your youtube channel? Still-It-Larger?

@StillIt

3 жыл бұрын

Hahahaha too true!

Hey Jesse have you got a link to the manufacturer of the boiler?

Very creative, condenser water, cooling device. Maybe over kill with the pump but awesome set up.

This gives me a new respect for a pot still and propane stove. His setup is so much more complicated. As far as price goes, he did get a good value.

Would you be comfortable ordering a bigger and more expensive still from Oakstills, are they reliable?

mmm, chinesium. I have about 100 more Chinese shipments to go before I have all my piece parts. Love Ali but you have to be very patient. Being able to order a pallet with all the bits would be so nice. 30 gallon pot, 4" column. Those are big batches for a home brewer. Getting that jacketed pot is a big win and he might have saved money buying bits and pieces but he could have easily ended up spending more buying things twice and adding all the different shipping costs. Seems too big for a hobbyist to me but I certainly wouldn't turn it down if you sent it to me.

I’ve just done the same exercise - 50L 4 plate, 4 inch still, big whiskey head/onion, gin basket, and and and. Sitting in the box at hone waiting for me to get back and unpack it. Price was about half of what I could get for exactly the same item locally.

@StillIt

3 жыл бұрын

New toys. . . . Exciting!

@Adam-fr8ly

3 жыл бұрын

Who doesn’t love new toys!?

@silveraven1

3 жыл бұрын

This is what I’m thinking 50L not a 100L . Do you have a link you’d care to share where I can look at your still?

@Adam-fr8ly

3 жыл бұрын

@@silveraven1 Dunno how to do that here, but if you message me in FB I’ll be able show you some pics.

@robertfontaine3650

3 жыл бұрын

@@silveraven1 50 litre is a beer keg 1/2 barrel. You can buy them used for cheap. look up keggle.

Looks like they shipped him silicone gaskets and not PTFE ones. Ignoring any potential safety issues they will pick up and hold the Gin aromas and flavours so will be OK until he wants to run a neutral and then they will leach flavour back out. PTFE gaskets don't cost much more and work just as well, it just seems strange that companies still ship silicone gaskets that degrade when exposed to quite a few chemicals in the distillate. Acetone, which is in foreshots, swells silicone just at room temperature and can effect the seal, under reflux all gaskets are exposed for quite some time so something to watch out for even if you aren't concerned about using unsuitable plastics in distilling.

@jttech44

3 жыл бұрын

Yeah, even if you forget the potential for chemical leaching, you really can't forget about the fact that those gaskets will degrade over time, and if you wait to replace them until they fail, they'll fail in the middle of a run which is a whole mess, not to mention a fire hazard. Much better to use PTFE foam gaskets, they last forever, don't get pinched, and unless you're boiling fluorine, you don't have to worry about any chemical leaching.

wow...crazy...nuts!...you boys down under know how to do this! It's a mini pro distillery! Cheers!

I just put an order in with oak stills....any chance of a follow up video for how this has all worked out please?

all my boilers and copper work are Chinese made. The workmanship is excellent, and they are good to make business with.

Please make more videos with his still, james was great would be good to see more vids with him

Oak still the best just got my new 100l boiler from them,... have a great fun guys 😁

@dakkarocka

3 жыл бұрын

Just ordered a 4inch flute and an 8 gallon boiler off them. Can't wait for it to arrive.

would love one of those, haha. when are you gonna get round to an update on your Dunder pit and making some Rum with it? lol

A tiktok creator had a really good video about ethical purchasing from places like China that have bad reputations and there is a fair amount to be said but basically if your willing to do a ton of research (if your planning on being commercial that should be your standard imo) you can find manufactures everywhere that produce cheap products but pays their employees fair wages after you adjust them for purchasing power.

I'm a beer brewer so I have no idea whats going on in this video but its definitely interesting. I can tell this is a very nice setup tho

@StillIt

3 жыл бұрын

Careful mate. Keep associating with us and you may be pulled over to the dark side 🤣

@russellmcgahee942

3 жыл бұрын

You are now entering the Zone of distillers and mad scientist all. So you make beer that's good because you must make a "wort, mash, beer"; all the same thing just different names before you can distill it. This in a great hobby and I wish you well. A jar of good shine will open doors that a dollar bill cant. Bio-Clinical engineer here. I love this stuff.

How woulc a coil work vs a jacketed sitll? I imagine they would have similar results

I really need you help. I am a huge fan. Here in the Caribbean, St Lucia, I am considering purchasing a 600L non jacketed still from Oakstills. For the production of whiskey, corn based. What do you think. Jacketed or non jacketed and why? Also, their 800mm high condenser seems to be on the small side for that still capacity of 4*7k watts boiler and 8* plate 8" column. What are your thoughts?

i bought one from China and it was meant to be 3 inch bubble plate but was only 2.72 inches, can you measure the actual pipe diameter.

I worked at a distillery company for a few years, and we ordered ALL the stills from China to resell them. Several distillery brands get their tanks from China. Then, we modified them a little to make them work correctly. Most of them have held good through the years, and the ones that didn't were usually ruined over the operator. I no longer work there and have nothing to gain from it. If you're curious about running a Chinese still, they work just fine. Some tanks may require modifications to function if you buy straight from China.

So what was the extra peice of stainless for?

That manifold is that for one of those stills that go up and have two columns?

@StillIt

3 жыл бұрын

We actually talked about that. But seemed a bit weird to make it that small for a still that size. Some of the fittings didn't quite make sense either. Had us stumped haha

what still did he buy do you have a link to it ?

Great video! Unless you are building from scratch then all the component parts you are buying come from China, so buying direct is just cutting out the middle-man. Sexy piece of kit...

Please review different distillation companies to see quality, selection, cost, customer service, etc...

This is a cool video. Not sure I'm brave enough to send $6k on the seas of the internet to China, but glad to see it worked out for old mate.

@StillIt

3 жыл бұрын

I hear you dude.

Looks quality!!