I have a feeling this guys channels is about to explode with popularity. Its nice to know if i go back to 40k, i can do so at a fraction of the cost and that money doesn't go to GW. Absolute win.

@SimplyWarhammer

3 ай бұрын

Haha let's hope so 🙈 my short sub 5 min videos as standard aren't what youtube want though but I'm enjoying it 😁 thanks again

@angryeric2961

3 ай бұрын

@@SimplyWarhammer I think current events are in your favor. While I have you here, thanks for uploading all this great information. Your going to help alot of people

@SimplyWarhammer

3 ай бұрын

I love the hobby and enjoy the channel so I'm keeping going lol 😁

always been tempted for 3d printing for HH, defo seems worth it over FW prices!

@SimplyWarhammer

4 ай бұрын

It really is ! And you can get all the upgrade options abd wargear 😁

As an avid printer for 2 years now i fully recommend it, if you dont count the printer price you can play warhammer on a 70-90% discount depending on the army Also i can recommend Sunlu abs like resin especially if you play an army with more fragile models like necrons or daemons its way more sturdy than the standard stuff (and actually cheaper then the anycubic resin i started on)

@SimplyWarhammer

4 ай бұрын

Thanks for the recommendation I'll definitely check it out 😁👍

@robclarke1098

4 ай бұрын

They have recently released a water washable ABS resin and it is really good. It is my go-to resin now.

@SimplyWarhammer

4 ай бұрын

oh wow nice 😁 whats the brand ??

@robclarke1098

4 ай бұрын

@@SimplyWarhammer Sunlu or Jayo (Jayo is just rebranded Sunlu resin. You can pick it up for 40.99 for 2 litres from everyone's favourite online shop and TV streaming service....

@robclarke1098

4 ай бұрын

Both Sunlu and Jayo (which is just Sunlu rebranded) are manufacturing it. @@SimplyWarhammer

I am so glad that i found your channel, wholesome and really easy content to digest as a newbie to the hobby - keep it up buddy!

@SimplyWarhammer

4 ай бұрын

Thanks very much 😊😁 that's what I aim for ❤️

Thanks so much for this video! I’ve been considering getting into 3D printing for 40k. This answers a lot of questions I’ve had. Keep up the great work, Good Sir!

@SimplyWarhammer

4 ай бұрын

Thanks very much and glad you liked it 😊😁

Love the idea of 3D printing, not so much the space it takes up in my already cramped one bed flat in London haha! Congrats on 9K subs!!

@SimplyWarhammer

4 ай бұрын

Thanks and tbh I manage on the top of a desk in my landing upstairs lol managed to do it without specific ventilation too 👍

@calvinpearson4619

4 ай бұрын

@@SimplyWarhammer Perfect! With that information my GF will totally sign off on it now 😂

@SimplyWarhammer

3 ай бұрын

I have another video about it specifically too, everything I've learned to date 😁

The Elegoo ABS 2+ resin is nice and durable, and I've snapped so many official GW models it's a non-issue for me. Awesome video, and lots of proxy ideas!

@SimplyWarhammer

Ай бұрын

Thanks very much 😊😁 amd thanks for the advice, I'll check it out 👍

Great video! I have considered it for some time now, so it was nice with some solid perspectives 👍

@SimplyWarhammer

4 ай бұрын

Cool thanks, also checkout my video about all the key things I've learned in printing too 😁

Great content, I’m so glad you keep pounding out videos ❤ 3D printing is a bit too much for me, but maybe one day…

@SimplyWarhammer

4 ай бұрын

Thanks very much 😊 I was sceptical of doing it but couldn't imaging not having one now lol... needed a new rhino for my Sisters and printed one last night 😁

“Thin or spikey” *cries in tyranid

@SimplyWarhammer

Ай бұрын

Haha I know 🙈

My brother has a resin 3D printer, I'm having him print me some bits so I can maximize some of my Tyranids boxes and do some kitbashes. That experiment is most likely what will help me decide to get into 3DWH40K. Fingers crossed for the give away!

@SimplyWarhammer

4 ай бұрын

That's the best way to do it, have someone go through the pain and mess of owning a printer haha 😁

This really helped me when it came to if I wanna 3d print or buy from shops

@SimplyWarhammer

18 күн бұрын

Ace, thanks for commenting 😊

Congratulations on the subscriber milestone. As someone who doesn't play games competitively neither WYSIWYG nor official models are ever really a consideration for me, and I find assembly of modern GW kits to be obnoxious to the point of off-putting due to unnecessarily cut up parts designed to counter recasters. I've got piles of kits that I just don't have the willpower to endure assembling just to make a monopose model that will be repeated 4+ times in an army. 3d prints frequently come with no or minimal assembly making a much more enjoyable experience for me. in short GW are driving me away from their models (which are no better sculpts than many 3d prints) to the 3D printing market with their pricing and kit design.

@SimplyWarhammer

4 ай бұрын

Yes, I didn't really discuss the point much that 3D prints do often come with minimal assembly making them much quicker to get on the table ! The thought of building 18 bloodcrushers from GW fills me with dread lol

Congratulations on the growth of your channel! I love me some dwarfs, but I'm not a big fan of what GW did with the Leagues of Votann models, so my first 3D printed army will be proxy space dwarfs. Wish me luck!

@SimplyWarhammer

4 ай бұрын

That's a great idea, proxy space dwarfs 😃 and good luck 😁

Great video and congrats on the milestone 👍

@SimplyWarhammer

4 ай бұрын

Cheers 😊😁

I'm half way through painting a 50/50 mix of printed and GW Tyranids. Just wish there was water washable high strength resin I knocked a knight off of my desk and every delicate detail was destroyed.

@SimplyWarhammer

4 ай бұрын

It's soul destroying when a print mini drops ! In another comment though someone recommended a water washable tough resin !! 😃

Thanks for the honest look. I've always avoided 3D printing due to space and fumes.

@SimplyWarhammer

4 ай бұрын

I've managed to due it in a rubbish space and kept the smell to a minimum tbh 👍 it is possible 😁

3D printing has always seemed cool to me, but I prefer myself to do lil kitbashes here and there instead!

@SimplyWarhammer

4 ай бұрын

Kitbashing is great fun, and I've found printing some bits to help really good too 👍

The quality of your prints look so good! Very nice job!

@SimplyWarhammer

4 ай бұрын

Thanks, my print do turn out fantastic 😀 I can't take credit it's the printer though lol

@ADapperDuck

4 ай бұрын

@@SimplyWarhammer hahaha good point, either way I'm jealous lol!

@SimplyWarhammer

3 ай бұрын

It is a hobby all in itself mind !

Love it dude printing is same for me I have certain gw stuff and will always support them but also Enjoy printing and changing armies up whenever I want

@SimplyWarhammer

4 ай бұрын

Yer exactly hehe 😁

Love the mechanical Tyranids. Have to pring that myself. Maybe with sturdy resin the Zoantrophes might not break so easy

@SimplyWarhammer

4 ай бұрын

That's were I went wrong but learned now I need to invest more in my resin 😁

Good video. I am not planning on pronting myself, but it's nice to have the perspective

@SimplyWarhammer

4 ай бұрын

Cheers, I've loved it so far lol

Was just starting to talk myself out of buying a printer. Now I must rethink again. Thanks! 😉

@SimplyWarhammer

4 ай бұрын

Haha sorry 🙈 although they are great 😁

If i had the time for another aspect of the hobby i would love to start 3d printing, its just the research and learning time that has kept me away so far. If i was in the market for some forgeword stuff though it would probably sway me! Those prices are eyewatering!

@SimplyWarhammer

4 ай бұрын

I thought I didn't have time then took the plunge and loved it 😁 check my other video out about all the things I've learned hehe 😉

Good advice regarding delicate models, I'll keep my Necrons legit but I do like those C'tan models

@SimplyWarhammer

28 күн бұрын

Thanks and have fun with it 😁 Necrons in plastic are so much easier to build with plastic glue and not worry about breaking when dry brushing, don't see the point in resin minis for them 👍

I would have never got into 40k if not for the 3D printing. I really enjoy the hobby now

@SimplyWarhammer

4 ай бұрын

Thats really cool

I’ve not tried 3d printing but it’s an obvious tool and definitely something to make use of occasionally. Wise words from you in terms of picking where it’s most appropriate

@SimplyWarhammer

4 ай бұрын

Super useful tool as you say even if you don't print whole minis or armies 👍

This helped thanks I was and still am on the fence about weather or not to get a printer or buy the custodies army box

@SimplyWarhammer

3 ай бұрын

Glad it helps... its a hobby in itself but its fun and once comfortable its hassle free

I only just started playing tabletop warhammer! So far I’ve only got the introductory and starter sets. Any suggestions on what to get next?

@SimplyWarhammer

4 ай бұрын

I'd suggest go with whatever faction and models you like the look of / idea of. Starting off get things that bring you joy then you are more like to paint and play them. What type of game play do you like, shooty? Punchy? Fast? Bit of everything? Do you like the poster boys Space Marines, do you want to be a goodie or daddy, or do you like aliens and monsters? 😊

3d printing always me to supplement my collection and get models I would never but normally.

@SimplyWarhammer

2 ай бұрын

It does ! Although give me more painting for to do... I have a full White Scars printed army for Horus Heresy to paint now 🙈 lol

At the rate I build and paint, and with the ammount of backlog I have, I wouldnt need to 3d print anything for years. Actually, I do want to 3d print some bits because I do a lot of restoring used and broken minis. Is there a really tiny super easy to use super cheap thing I could get for that? Or would I be better off just getting stuff printed for a fee by my lgs?

@SimplyWarhammer

4 ай бұрын

I've done a video about not 3d printing, the idea to get someone to do it for you lol... if you know someone just ask them and lob a little money their way.... I've done that for a channel member before 😅 I think there are small printers but not that good but you can get entry level ones that are ace. Still < £300 all in to get going

water washable is incredibly brittle. After years I made the switch to ABS-like now that IPA is down in price again. I would suggest for prints with fiddly bits, just undercure them in the cleanup step but don't waste any time getting them primed. Cure as much as you can until the part starts to give resistance to moving. Once they're sealed in a layer of primer you're not really touching the resin at that point. Just don't eat the things and use care before they're primed.

@SimplyWarhammer

4 ай бұрын

Thanks very much, nice tips 👍

I got me a Mars and it has been a banger. Throwing out an occasional pop-culture model here and there has been a joy. My favorite being a certain frozen food truck to go with my buggies.

@SimplyWarhammer

4 ай бұрын

haha cool 😁 its hard to find a bad printer these days !

I've just started 3d printing as of this week, mainly for terrain and kitbashing. I'm going to start looking at printing models soon but I've already got the mother of all painting backlogs!!

@SimplyWarhammer

4 ай бұрын

Haha that's a problem with doing a lot of printing it just builds a bigger painting backlog lol... I've all my dwarfs to paint but I've made a start 😅

@SimplyWarhammer

3 ай бұрын

You've done the giveaway 😁🥳🙌 woo hoo congrats

@TrickysFlyingBurrito

3 ай бұрын

@@SimplyWarhammer Ha ha I never win anything, cheers dude! Just seen the vid.

@SimplyWarhammer

3 ай бұрын

If you can email me then we can chat about what you want and I'll put you in touch with the commission painter and you can sort how you want it painted 😁 You can get my email from the about section of my channel page 👍

@TrickysFlyingBurrito

3 ай бұрын

@@SimplyWarhammer Cheers bud, just done!

It would be perfect for customizing existing kits for me. I realy want to make a Salamander all Primaris successor chapter. I could print out scale tabards and anvils for iron halos!

@SimplyWarhammer

4 ай бұрын

Yer definitely, loads of customisations possible 😁

I can never find files for 40k, but I do enjoy several proxy figure armies.

@SimplyWarhammer

4 ай бұрын

You should search on Telegram 😉

Interestingly enough for me. I still haven't covered my costs in savings by 3D printing before you would consider any labor time or working with hazard chemicals. Granted if you have free time in life in abundance you certainly don't have to put labor into the equation. Most of my FW prints were FW models that got culled in 10th but there are still a few things that I have that are playable. The best use is for models that are excessive on a per unit basis AdMech & guard walkers. Beasts of Nurgle & this type. I find I haven't cut my spending on Warhammer as much as I hoped from 3D printing. I also find 3D prints break easier but once you can print them replacement cost isn't bad but they are far less durable in general. Maybe there are resins that would fix that, I haven't gone that far down the path of resolution of easily broken 3D printed models. GW grey plastic really does hold up well to drops and accidents compared to other mediums. The working with hazardous chemicals that you don't want to breathe or touch is no small element. I have a local gamer who had to give up 3D printing to developing or having severe reaction to being around resin. 99% isopropyl is also a substance to be considered about storing from flammability. It does make a home owner a bit of a chemist as far as increased risks and potential issues. My conclusion is a cheap decent quality 3D printer will probably pay out especially if you are not short on the time involved in printing. which the time isn't really a big factor when things are printing correctly. I went for a more expensive larger higher quality printer because at the end of the day I wanted to try it out and not be short on the quality level I want. I learned after the fact a cheaper 4K would probably have done fine for most things I ended up printing.

@SimplyWarhammer

4 ай бұрын

I haven't even thought about recouping the cost 🙈 haha having too much fun... but I need to investigate better resins, as you say GW plastic survives bad handling. I chose water washable resin which is a bit better but you do become a chemist and have a responsibility to not flush old resin ! I'm lucky I haven't had any reactions to it yet

I have just finished printing my dwarf army from the same creator and they are fantastic quality. Their Orcs and Goblins range is also excellent.

@SimplyWarhammer

4 ай бұрын

haha sweet 😁 they are great and I"m sure I'll get draw into other factions lol

Great video! Where are the best sites to get the STL files?

@SimplyWarhammer

3 ай бұрын

Get the Telegram app, search and join groups 👍

I like your broad view on 3D prints. It's often just YES or NOO

@SimplyWarhammer

3 ай бұрын

Thanks very much 😊

Great video. My 3d printer had been a god send for my necron army. Most of my force is printed

@SimplyWarhammer

4 ай бұрын

Nice lol, I'd have thought they'd be spindley and breakable... have you done something as big as monolith ?

Once I have space its one of the first things I want to invest in, specifically for bits. One of the hardest things about kitbashing and converting is finding the right bits (and at a decent prize). Sometimes it just feels bad to cut off part of a bit that is out of print, hard to find, or expensive (or all of the above!) and being able to print (and design) my own would probably make hobbying so much better. Though your comments about gribbly bits are good to know, because the last thing I want is to have to ruin my paintjobs because I keep having to reassemble the minis.

@SimplyWarhammer

4 ай бұрын

That's a great use of a printer and for small bits they can print quickly really. I'm currently building official bloodcrushers now 🙈

@aquitainedugascon4726

4 ай бұрын

@@SimplyWarhammerYeah they looked battered, real shame because the paint job looked good!

@SimplyWarhammer

3 ай бұрын

Literally every time I touched them a bit broke, its annoying! I played a tournament with them when no stock was available anywhere so that's good. The official ones I'm painting now at least will last as GW plastic is resilient

Eldar titan was non resin right? I know you lose some details but i wouldnt mind durability so ill try just non resin for oldworld dwarfs hope they ll look somehow good.

@SimplyWarhammer

4 ай бұрын

All my printing is resin, and forgeworld is resin also 👍 great quality on the detail just a little brittle

Ministry of Resin Water Washable is the best out there for miniatures. It has a lot of flex so your models are not brittle. Horns bends instead of breaking. It is not cheap but you don't have a lot of good options for water washable resins that aren't brittle.

@SimplyWarhammer

4 ай бұрын

Thanks for the recommendation, I'll definitely give it a try 😁 👍

Honestly with the ongoing GW stock issues, 3d printing is sometimes the only way to get an army you want! Old world and HH are perfect examples. Highland miniatures must be making a killing with their well-made lines. Next month is goblin month for them and I'm very interested!

@SimplyWarhammer

4 ай бұрын

I know ! They will be doing great and GW aren't competing as most things aren't available. What they do have available from AOS range has been made legends by them! HH is just as bad, most tmof the time as you say 3D printing is the only option

I buy 3D prints, but generally of the models that never seam to be in GW stock. The only time that I have brought 3D printed models when they were available from GW was the dwarf 'Iron Bolt' blood bowl team, as those models looked super cool!

@SimplyWarhammer

4 ай бұрын

Fair enough... I agree GW would do much better if they had stock 😆 who'd have thought lol

3D printing is a godsend for holes in the range. Looking at you, Old World

@SimplyWarhammer

4 ай бұрын

oh too right !! 👍 its actually a joy finding things for the gaps too

Smashing it out of the park as always. The best warhammer community about.

@SimplyWarhammer

4 ай бұрын

Thanks and we do have a great community 😊

Printed a nice tyranid army to test out and go with my old lead Eldar for my son to paint and use. GWprices were a little prohibitive, but printing made it viable.

@SimplyWarhammer

4 ай бұрын

That's ace and a great idea 😁

I'm all for the rule of cool. There are some models that just look amazing, with what people do with them.

@SimplyWarhammer

4 ай бұрын

I think most people in tournaments are happy with it too, unless you are modelling something vastly smaller than it should be 😁

@Jorden102044

4 ай бұрын

@SimplyWarhammer absolutely. I see modeling for advantage isn't the rule of cool. Luckily, in the tournaments I've been in, it's not a thing that I've seen. One of my favorite models I've seen was a fully fabricated stompa.

@SimplyWarhammer

3 ай бұрын

I personally don't even think about modelling for advantage when looking at an opponents customised or kitbashed army... defo right made size is needed though

Always been a bit meh on 3d printing. But after seeing those dwarf sculpts and how much they look like the old metal ones I love I'm tempted.

@SimplyWarhammer

4 ай бұрын

Yer some sculptors are amazing !!

GW, now push 3D printing with their actual state, so this kind of channels will got the colateral benefit, and also thanks for the video.

@SimplyWarhammer

3 ай бұрын

I agree and only hope you are right about the growth 😉 poor stock, fomo releases and legends are all reasons people choose to print more now than ever.... also the amazing quality and affordability of printers!

Great video!!

@SimplyWarhammer

4 ай бұрын

Thanks 😊 😁

might be late asking here but how bad is smell and is it loud also dose it cost a lot in power bill. i spend way to much on warhammer so i like the 3d printing idea but live in a small-ish flat so unsure if its for me

@SimplyWarhammer

3 ай бұрын

With water washable and the airfilters it's not that bad a smell. I leave it running overnight and the family and I sleep fine with the noise. I use ppe like mask and gloves when I'm handling directly with the lid off, it really isn't a problem being in a small area. The things I've learned since is its worth spending on less brittle resin and hollowing big bits out saves money but at the risk of strength and you need holes for internal drainage ☺️

@drussarn

3 ай бұрын

@@SimplyWarhammer awesome, thanks for replying. I think I will get one. I've seen sales on them before so will grab one after doing a bit of research into my choices Cheers

@SimplyWarhammer

3 ай бұрын

I realised I didn't comment on power draw but I don't notice it as pay a fixed monthly direct debit anyway. You won't be unhappy with what you are unlocking for yourself 😁

@miguellopez3392

2 ай бұрын

​​​@@SimplyWarhammer ill do the rough math real quick. For a 10 hour print where 1/3 of the time is spent running the UV light, its about 20 cents of electricity at average residential prices in the US.

I use Jamg He 10k art engineering resin, it's really sturdy.

@SimplyWarhammer

3 ай бұрын

Cool ill check it out thanks 😁

Use a mix of 25-30%flex resin/ 75-70%normal. The models are just as durable if not more than GW products.

@SimplyWarhammer

3 ай бұрын

You mean mix types together? Interesting idea 🙂

@benmuir6570

3 ай бұрын

@@SimplyWarhammer Give it a go, it works like a charm.

@SimplyWarhammer

2 ай бұрын

Cheers

I think printing models is the mest moneysaver ever. I’m building a grey knights army and you can find decent 3d stls free online. Even if i don’t have a 3d printer, you can easily find some Random gal Who can print it for you! Amazing

@SimplyWarhammer

4 ай бұрын

Yer exactly, you can get someone else to print for you 😁

Liked and subscribed thanks for the great video!

@SimplyWarhammer

Ай бұрын

Thanks very much 😊😁

I have the night bringer proxy. Better scale than the gw one but brittle.

@SimplyWarhammer

4 ай бұрын

Ace but shame it brittle

I've been a patreon of Highland Miniatures for a long time and have their complete lines including a few limited Frontiers. You should find better resin to use. ABS-like resin is best for wargaming resins

@SimplyWarhammer

3 ай бұрын

Thanks I will from now ! All part of the learning process 😁

I’ll be brave enough to get a 3D printer one day, I hope. Good to hear you are having a blast.

@SimplyWarhammer

4 ай бұрын

Haha its great 😁 checkout my video about everything I've learned 😉

I print for One Page Rule and it's incredibly cost effective and I can make exactly what I want. I made firstborn blood angels with primaris size and I really enjoy it.

@SimplyWarhammer

3 ай бұрын

Exactly it works so well !

I'd love to get a 3d printer but lack the space and expertise unfortunately There some great sculpts out there for printing

@SimplyWarhammer

4 ай бұрын

I thought that too tbh, then took the plunge and never looked back lol

@jjmurph876

4 ай бұрын

@SimplyWarhammer tempted to look into it myself later this year in time for new edition of AOS

@SimplyWarhammer

4 ай бұрын

I'm happy to pass on anything I've learned to help out 😁

@jjmurph876

4 ай бұрын

@SimplyWarhammer if it happens I'll be sure to ask for tips

@SimplyWarhammer

4 ай бұрын

👍

Thanks for sharing your experiance!

@SimplyWarhammer

4 ай бұрын

Thanks for watching 😁

You can just print out on card paper and fold them up. If you really want to play the game. So it's never about the game. It's about playing with the models that you can be proud of.

@SimplyWarhammer

Ай бұрын

Yer it is all about the models 👍 I think only a small part of the hobby is game focused 1st

Nice Channel 🤘 Abo set🍻 I love my 3D printer. now two pieces, an Anycubic Photon mono 4k and an X2. I think another larger model will be added this year. With the exception of a few models from the new 40k starter box, I printed all of my Tyranids myself for free thanks to Cults3d, except for the resin. The latest model is a Warlord Titan. Scaled a little smaller because I couldn't get parts 1-1 onto my printing plate of the X2. is it worth printing? I'll lean out a little and definitely say YES I completely understand that Games Workshop is now getting a bit thick about it, but personally I can't afford to put 1200 euros on the table for a Warlord Titan. my wife would kill me. I'm honest, other models from the store aren't worth the money to me either. Of course I still buy some things, but now I have a lot to print out on my hard drive. If Games Workshop or Forge World were to lower the prices a bit, that would certainly be welcomed. But now I prefer to invest 50 euros a month for the water-washable resin from Anycubic and print myself. You can get a lot of miniatures and accessories out of one bottle. and the quality is, in my opinion, really wonderful.

@SimplyWarhammer

3 ай бұрын

Agreed the quality and cost of printing is fantastic ! I've loved it alongside also paying gw for models 🤦 guess I'm silly lol 😆

Love me some 3d prints 👍 can’t get to 15k points of Nids without some proxies and replicas 😂

@SimplyWarhammer

4 ай бұрын

Haha mint 💪

I'm currently working on a fully 3D printed other than My librarian and my two dreadnoughts and my rhino for my custom grey knights army and I'm currently at 460 points if I don't include My librarian and my kaldor Drago proxy dreadnought and my rhino out of cardboard because I only play with my brother and his friends and once every great while at my LGS because the guy who owns the shop literally has a fully 3D printed 10,000 point army and they are beautiful even though they are orks. And even though my brother only pays $35 for a bottle of resin I don't know what brand he gets where the company is but I've never had a problem with the resin and I currently have a kill team of sisters of battle that all have cyber Valkyrie wings and their armor is designed to look like that and when not playing kill team I have them counting as seraphim and zephiram squads But the fact that I have a strike squad an interceptor squad and a brotherhood Terminator squad and my brother said the cost of the resin not including electricity for the printer or the curing machine that uses the UV lights or the cost of the isopropyl alcohol I've spent less than $10 for three squads of grey knights a proxy for caldor Drago and two five man squads for the sisters of battle being roughly about another $3 so I've spent 13.00 on 26 miniatures and I cannot count My librarian because that is actually a dark Angels Terminator that I repainted

@SimplyWarhammer

Ай бұрын

That's brilliant, it's ace how cheap it is and nice work finding a resin that isn't too brittle for you. Jealous of your group and local shop that don't worry about the models, the rule of cool wins 😁 nice 💪

I like the idea of printing my own stuff with all the variation and some of the scenery is amazing but honestly I'm far too lazy, I'd buy it all and then not bother :-)

@SimplyWarhammer

4 ай бұрын

Haha fair enough 😅

@AlabamaShrimp

4 ай бұрын

@@SimplyWarhammer that said there's all those tiny bits missing from my old hammer I could make... Maybe one day.

@SimplyWarhammer

4 ай бұрын

Lol that would be perfect if you can get scaling right 😉

I support rule of cool for models. what about printing terrain ?

@SimplyWarhammer

4 ай бұрын

I'm going to have to get myself an FDM printer then I'll definitely be doing terrain too 😁

Where are you getting these stls from?

@SimplyWarhammer

2 ай бұрын

Email me through the about the channel link and I'll let you know 😊

@BeardedHokage188

2 ай бұрын

@@SimplyWarhammer email sent!

@SimplyWarhammer

2 ай бұрын

💪 I just can't share details on YT 🙈

My beautiful Abaddon

@SimplyWarhammer

4 ай бұрын

haha I had to add an extra pic of the cloak 😍

@theAntix101

4 ай бұрын

😍

@SimplyWarhammer

4 ай бұрын

😁

I 3d print my terrain and gaming features. Haven't tried models yet.

@SimplyWarhammer

4 ай бұрын

I haven't tried terrain yet, I might get an fdm printer for that though 😁

@bdgarrett81

4 ай бұрын

@SimplyWarhammer I use PLA. Tons of open license materials in thingiverse for printing. Just pulled a bunch of drums and crates off the printer this afternoon.

@SimplyWarhammer

3 ай бұрын

Yer I need a better resin !

Awesome video.

@SimplyWarhammer

4 ай бұрын

Cheers 😁😊

sunlu water washable abs like resin, give it a try

@SimplyWarhammer

Ай бұрын

Thanks I'll have to give it a go 😁 wish I'd know this before printing a full Dwarf Old World army lol

ace 👍 thanks

@SimplyWarhammer

4 ай бұрын

My pleasure 😁

3D printing allows for more "kitbashing" and making your army more unique

@SimplyWarhammer

4 ай бұрын

Yer it's perfect for that too 😁

Where are you at man? I’d love to play a game

@SimplyWarhammer

2 ай бұрын

I'm in Cheshire UK and always after some games 😁

@catman-hi5cn

2 ай бұрын

@@SimplyWarhammer ah man, America myself. Tzeentch has done it again

@SimplyWarhammer

2 ай бұрын

Typical 🤦

How much printer costed ?

@SimplyWarhammer

3 ай бұрын

The elegoo saturn 3 ultra is currently £450 on Amazon. But seems like there's a Saturn 4 out now too !

@ServTech1337

3 ай бұрын

@@SimplyWarhammer yeah i just found out, im trying to build my printing setup ( one fdm, one resin) and im deciding between saturn 3 ultra or mars 4 ultra + neptun 4 max ^^

@SimplyWarhammer

2 ай бұрын

All depends how big a build plate you want and what other features each gives you, I'm sure they all print excellently

Kick Winter's butt.

@SimplyWarhammer

4 ай бұрын

Haha how did you know I'm taking my White Scars to Winters 🤣 thanks, I'll try to lol

Just a heads up that you will very likely get your channel nuked if you show your scanned stl models on screen. Soooo many channels have gone this way, they hate people knowing you can bypass their predatory pricing model. GW lawyer army is actually insane, for no other product have I had such difficulty trying to find pirated files. Navigating discords and telegrams, getting grilled by mods like some kind of terrorist to prove I'm not a mole 😂😂😂

@SimplyWarhammer

25 күн бұрын

Thanks for the heads up!! Eek 😬

GW just raises prices again. $265 for the new genestealers battle force?? get real. buy a 3D printer.

@SimplyWarhammer

Ай бұрын

I know ! another price rise 😬 they need to stop milking the existing player base and encourage more players by being cheaper As you say at high prices it pushes people to print models

Nice

@SimplyWarhammer

4 ай бұрын

😁 👍

Ain't nobody got space for that 😅

@SimplyWarhammer

4 ай бұрын

Haha my house is rammed full of warhammer 🙈

@chrisg8321

4 ай бұрын

@@SimplyWarhammer Kinda same, our spare room is mostly warhammer. Drives my wife nuts.

@SimplyWarhammer

3 ай бұрын

Yep mines the same lol thank god for the really useful storage solutions though 😅

Our group has been playing for 20+ years together. We're all retired IT guys who've spent literally thousands of dollars each buying models. We recently purchased 2 3D printers after Warhammer and GW decided to rewrite the lore to conform to their woke narrative. We'll not only print our own models, but design them too. Everyone has a custom built campaign map, so there's no need to go to shops or tournaments anymore. We're just going to go our own way.

@SimplyWarhammer

2 ай бұрын

It so easy and good quality nor to print isn't it !

Love the vids mate, hope I win 👍

@SimplyWarhammer

4 ай бұрын

Thanks and good luck 😁

You're a fool if you don't invest in a 3d printer. Not only for saving money, but GW constantly runs out of stock. Resin is never out of stock. The models you can print look much better also than those designed by GW.

@SimplyWarhammer

2 ай бұрын

It is super useful but it's a hobby in itself and can see why people are scared off. I think the more you spend on equipment the easier it is !

Anything that takes money away from games workshop is 100% worth it!

@SimplyWarhammer

12 күн бұрын

Lol 🙈

As an Australian 40K enjoyer , 3d printed armies are really the only realistic way of enjoying the hobby . The model prices here are atrocious. The new kroot box is is nearly 240 pounds here

@SimplyWarhammer

4 ай бұрын

That is awful !! I think it's cheaper for me to buy here with 20% independent retailer discounts and post it you than you buy there ! Joke

Nah. Use OPR. Dump 40k. They hate you.

@SimplyWarhammer

23 күн бұрын

I enjoy GW games too much to abandon them unfortunately but I understand why lots do 👍

well me yes if did it i F it up i know it not if works like a toaster then yes but do not but like find copanys that do it well hare in PA yes a butch of girl guard like get off of ESTY and yes tanks to like get off the 3D stuff just spent $350 on two lamen rus one knight and 10 boring guard ho did a sigghth and mad em out oven back clay and lots bits just got give new teeth sharks teeth with be it see as post new

@SimplyWarhammer

4 ай бұрын

Lol well having a printer allows you to print all those ideas you might have and just pay resin costa which are really cheap per model ! Watching my vid about what I've learned will help if you ever got into it 😁

Short anser : yes Long answer: yeeeeeeeeeeeeees absolutely

@SimplyWarhammer

4 ай бұрын

haha 😂

@CuteAssTiger

4 ай бұрын

@@SimplyWarhammer I wouldn't have gotten into the hobby if I didn't have a printer