Follow me on Instagam and Facebook ToolsandTrash for sneak peaks and snipbits
Жүктеу.....
Пікірлер: 109
@YesImhymn3 жыл бұрын
3:05 I can confirm that they are made in China 😂
@toolsandtrash6911
3 жыл бұрын
Thank you!
@brayancolin9377
3 жыл бұрын
A tip: you can watch series at flixzone. Been using them for watching a lot of movies these days.
@parkerzayden7689
3 жыл бұрын
@Brayan Colin Definitely, I've been watching on flixzone for since december myself :D
@YesImhymn
3 жыл бұрын
@@brayancolin9377 enough with the scam sites
@b-2466
3 жыл бұрын
@@parkerzayden7689 "for since december" 😂😂😂 GTFOHB
@balinoob18373 жыл бұрын
The Irwin looks like what's happens when you let two cousins get married...
@toolsandtrash6911
3 жыл бұрын
😂😂
@nateb4543
2 жыл бұрын
True love?
@robertgeminetti24543 жыл бұрын
I died when the banana showed up on screen 🤣
@gavinczeciuk3 жыл бұрын
I am an industrial mechanic and have both of these. I can definitely say the Irwin's are a good quality for the price. The knipex pliers wrench is top model tho
@ruzziasht349
2 жыл бұрын
Sorry, I don't believe you... Irwins are Chinese trash
@esl4058
Жыл бұрын
Completely agree. I’m an electrician and Irwin is by far my fav brand when it comes to price. Knipex are of course great but that’s like comparing a 2023 Porsche to an 87 Volvo lol.
@mikelight29653 жыл бұрын
I don’t care for tools that don’t work! I appreciate your time making tools fail!
@zylent82513 жыл бұрын
Can you do a review/comparison viseo on Gedore's pliers wrench and compare with other equivalents?
@TurboTyTy3 жыл бұрын
The milks gone sour...I don’t mess with the Irwin pliers
@toolsandtrash6911
3 жыл бұрын
Yogurt
@three-phase5623 жыл бұрын
That's an intriguing failure. At around 4:57 the teeth you pointed at have about a third of their area stripped indicating that the teeth do not mate all the way across, that would be a pretty fundamental design flaw.
@toolsandtrash6911
3 жыл бұрын
I agree they really should reach across that whole channel for better strength and durability
@lawdog5162 жыл бұрын
The banana and kiwi was hilarious bro!!!! Thanks for the morning laugh
@esl4058 Жыл бұрын
Never used either of those models but I’ve had a pair of Irwin dykes and Irwin “channel locks” that I’ve used for years. Irwin makes great stuff for the price.
@nateb45432 жыл бұрын
So if irwins are roughly $15, knipex are $45, and quality matches price; are there any comparable items that are like $25ish. Knipex set of 3 is $165 on amazon right now
@jeffreywolf5235 Жыл бұрын
That's one thing you're Knipex will never do!
@BL-yj2wp2 жыл бұрын
Knipex actually specifies the 250mm pliers wrench for up to 1 tonne (2204lbs) of jaw clamping force.
@YesImhymn3 жыл бұрын
Dam. I threw the packaging away so it’s too late to return them...If mine ever give me issues I’ll warranty them. Thanks for this video!
@samostroff9341 Жыл бұрын
Appreciate the review. Craftsman V Series pliers have the same action, have you tried those? Thanks again for the review
@mikelight29653 жыл бұрын
Nice to see ya back in business
@toolsandtrash6911
3 жыл бұрын
🤝
@brandonb81033 жыл бұрын
I have the same irwin pliers and my experience is the same as yours, with light use the teeth took a shit. I agree in this case the extra cost of knipex 100% makes sense. That design with the teeth on the side doesnt seem to hold up well. By the way i recently purchased the wiha 32948 insulated linesman pliers, and I am in love with them, but I am just a DIY who enjoys nice tools, would you be willing to test any of the wiha pliers at your job? Id love to see how they hold up in real world conditions with daily use. Also keep it up man, your reviews are the best, the guys that just show me a brand new tool, doesn't tell me shit. However seeing a bad ass maintenance mechanic beating the shit out of something and it holding up makes me feel way more confident in my purchases.
@toolsandtrash6911
3 жыл бұрын
Thanks dude! 😊 and I have a list of suggestions I will definitely look into those! I'll post a picture when I get them! 😁 I do enjoy wiha tools tho
@NightHawkWatch Жыл бұрын
I have both of these wrenches and use them both daily. I haven't had them fail on me yet. They both have their pros and cons. You must have gotten a lemon though, or torqued the wrench too hard, or both.
@powerai3 жыл бұрын
Interesting. Might be ok for home use . I will stick with knipex. I find I usually run into something that is tight or needs a little extra to break it loose. And knipex gives me that extra!
@toolsandtrash6911
3 жыл бұрын
I agree 👍💯👏
@SluSharkND3 жыл бұрын
So when you are up on a platform getting paid to turn valves off and your new, bargain pliers fail miserably at leas you can say "but they have a cool color scheme on the handle!". Seems worth it.
@toolsandtrash6911
3 жыл бұрын
My point exactly 💯
@VoiD1x
3 жыл бұрын
What job would that be, gasfitter or something industrial?
@toolsandtrash6911
2 жыл бұрын
@@VoiD1x industrial refrigeration
@MesoTroniK3 жыл бұрын
If you can get the VBW / Stahlwille pliers wrench (they are the same tool just a rebrand), I would be very interested to hear your thoughts on those. I own both them and the Knipex ones and while I don't use my tools as hard as you. I believe the VBW ones to be superior but won't know for sure unless they get pushed really hard!
@anthonyquinlan975
3 жыл бұрын
I have both I prefer using the vbw but it's just personal choice knipex opens wider on the same size tho and the handle material on vbw just falls apart.....
@toolsandtrash6911
3 жыл бұрын
I have those lined up to buy I have had these suggested several times 😊
@scotts41253 жыл бұрын
The only issue I have with my Knipex is you have to have the jaws in a precise position to adjust the jaws. I seem to have to play with them more than I would like. The Cobra's give me no issue.
@craigmonteforte14783 жыл бұрын
Many of the modern Irwin tools are being made in China and they must have a little better quality control and manufacturing specs because all the ones I’ve bought have held up quite well I am a retired Woodworker and I do almost all my own plumbing , electrical ,and mechanical work and repairs myself so I keep and use a wide assortment of tools and do prefer higher quality as a general rule as I want mine to last for many years of service
@ben60892 жыл бұрын
Buy right or buy twice
@robertsneed32 жыл бұрын
Wow, guess I'll be getting some Knipix. Thanks for sharing. #PEACE✌🏾
@jonhvac3 жыл бұрын
I thought about buying these at Lowe's but, I stopped myself. They do look wonky. Too bad they failed, it would be nice to have a Knipex alternative pliers wrench.
@toolsandtrash6911
3 жыл бұрын
Yes that's what I was hoping they would be
@b-2466
3 жыл бұрын
Lennox
@jonhvac
3 жыл бұрын
@@b-2466 Lenox is owned by the same company Stanley Black & Decker) and their pliers wrench is just larger and nickel plated.
@justwrenchit92873 жыл бұрын
Do the grips fall off? I need to know! 🤣🤣🤣
@toolsandtrash6911
3 жыл бұрын
Nope! But the button does! 🥲
@kross12612 жыл бұрын
Just looked at both off these models yesterday at mennards. The Irwins were $9 after the rebate. Couldn’t justify paying $50 more for what little I’ll use them.
@ruzziasht349
2 жыл бұрын
I bought the Knipex as I couldn't justify give my money to China
@kross1261
2 жыл бұрын
@@ruzziasht349 you do realize they’re made in Germany? Also unfortunately a lot of items in most are made in China if we like it or not.
@ruzziasht349
2 жыл бұрын
@@kross1261 My pair of Irwins said "made in China" on the packaging. Germany is well known for quality engineering, plus they're an ally.
@strangetamer69x12 Жыл бұрын
Do you know that the Irwin pliers are supposed to close without pressing the button? It’s an auto adjust feature so comparing these to the pliers wrench isn’t an apples to apples comparison. Don’t get me wrong I love my Knipex comfort grip 7.25” pliers wrenchs, but to me it looks like you don’t know about the Irwin’s auto adjust feature on these pliers. The Irwin V-jaw pliers don’t have the auto adjust feature on them & that’s probably why you would think these were supposed to behave the same way. & I don’t think Knipex has made an auto adjust pliers wrench yet, they have cobras that auto adjust but that’s it I believe.
@anthonyquinlan9753 жыл бұрын
Same kind of design as those channel lock 430 things you had before and also look like something from my kids Bob the builder tool belt....
@toolsandtrash6911
3 жыл бұрын
Yes it is similar but the channel locks don't have the auto ratchet close feature you have to press the button for them to adjust
@anthonyquinlan975
3 жыл бұрын
@@toolsandtrash6911 and they're just as shit tho.... Think I'll stick to my VBW's and knipex...
@MadMetalShop Жыл бұрын
Bro you need more subs! 🤣
@toolsandtrash6911
Жыл бұрын
😩
@MadMetalShop
Жыл бұрын
@@toolsandtrash6911 +1👍
@MadMetalShop
Жыл бұрын
@Tools and Trash ... I do mostly dumb shit but every once in a while I have something interesting 🤷♂️. Gun builds fabrication fucking off in general bs like that 😊. Stop by if you like.
@toolsandtrash6911
Жыл бұрын
@@MadMetalShop I’ll check it out tonight!
@iowafox22063 жыл бұрын
I see what you did with the banana and kiwis! Lol
@toolsandtrash6911
3 жыл бұрын
I have no idea what your talking about 😌
@mommy7978
3 жыл бұрын
@@toolsandtrash6911 right🤔
@MarzNet2562 жыл бұрын
Looks like it was made in a medieval foundry.
@disklamer2 жыл бұрын
Really the baseline criteria for a functional tool aren't that high, holding on to a fastener without disintegrating is kind of a big one though. I'll hold on to my € 1,89 sloppy adjustable wrench from the grocery store for now.
@aplaceholderbplaceholder95242 жыл бұрын
These wrenches ain't angled right to get into anywhere with a lot of force applied. I got a set of knipex but finding myself reaching for my Cresent a lot more.
@platoscavealum9022 жыл бұрын
👍 ℹ️
@MojoPup2 жыл бұрын
That's sad for an Irwin product.. Most of my Irwin tools are pretty good quality, but those look like Kmart made them.
@balinoob18373 жыл бұрын
Yeah warranty doesn't make a tool great, you don't want to be all the time going to change your tools because they break when working. The Irwin didn't look like it has a strong grip action like the knipex 10:1 ratio of the jaws
@jamier91132 жыл бұрын
yo what's with the faint chicken pic in the bottom right
@toolsandtrash6911
Жыл бұрын
😂
@dustinpomeroy88172 жыл бұрын
Haha ,it looks they didn't even try on these
@milwaukee_695 ай бұрын
Bad luck with your pliers (w/a/r) my grove locks work great.
@keldon_champion2 жыл бұрын
It's too bad they are crap, because I like the price and I like my knipex ones. Grom what I have seen no one else can get the pliers-wrench thing right it's kind of like buying locking pliers from anyone but vice grip (I know it's Irwin's) it's a waste of money
@MrFlashx13 жыл бұрын
Vice grip had a good name once
@toolsandtrash6911
3 жыл бұрын
Yes they did back when they were made in Nebraska 💪
@socal_expat18563 жыл бұрын
The only Irwin’s I own are the NWS rebrands. Pass on the crap Chinesium tools
@toolsandtrash6911
3 жыл бұрын
Yes sir
@Everythings_Adjustable3 жыл бұрын
It's a shame they didn't last
@toolsandtrash6911
3 жыл бұрын
I agree 😔
@chaseadillo883 жыл бұрын
Same thing happened to my irwin/vice grip cobra wannabees within a couple weeks. Junk junk junk.
@toolsandtrash6911
3 жыл бұрын
Yes! I had the same experience!
@FranciscoRodriguez-be6ik3 жыл бұрын
The only good thing about those irwin is the grips.
@toolsandtrash6911
3 жыл бұрын
Indeed
@larryborkstrom35803 жыл бұрын
It's a shame what happens to the name vice grips I prefer knipex over them
@toolsandtrash6911
3 жыл бұрын
So do I
@jotu1732 жыл бұрын
Simultaneously good and the SUPER -WEIRDEST tool / tools (pun intended) video I have ever seen. Never seen a banana and ?Kiwi? s incorporated in a hand tool video. It seems way to coincidental that at 3:15 a banana appears (strangely) out of no where into close range and shortly after a Kiwi is shoved into close range view until being united with a 2nd Kiwi in a phallic configuration at 4:11 and left on screen for the rest of the video. Later at 8:04 (when banana and Kiwis are disrupted) you claim you just "bruised your banana" and make sure they are back in a perfect phallic shape. Did you use the banana because you were fresh out of egg plant??? Either you are A) just plain bizarre B) trying to increase viewership through subliminal messaging OR (for whatever strange reason) C) doing your "tool" review innocently among 3 pieces of fruit that you like to keep really organized. If "C" is your answer, you might want to STRONGLY consider seeing a therapist. Either way, (in my opinion) there is one to many "tool" s in this video... OK review, but VERY freakin weird video in my book... jus sayin!
@toolsandtrash6911
2 жыл бұрын
Can't stuff just be funny? I mean you watched the whole thing it seems 🤷 mission failed successfully?
@jotu173
2 жыл бұрын
@@toolsandtrash6911 So you admit it was done purposefully then? I am just surprised that (I think) It took almost a year for ANYONE to notice / say anything. I admit, I was almost done watching and on to the next video, before I realized anything was going on and then only faintly suspected something beginning with, "that's weird, a banana and Kiwi on screen in a tool review video"... until I rewound and FFwd it and looked at key parts of the video again. for most of the video I was trying to figure out what is the almost transparent graphic you have in bottom right corner (and still don't know what it is). What is the graphic? FYI I have 25 years advertising experience, so the subliminal thing quickly got me going.
@toolsandtrash6911
2 жыл бұрын
@@jotu173 the graphic you see in the corner is a picture my 20 piece wings I got from Buffalo wild wings a few years ago
@toolsandtrash6911
2 жыл бұрын
@@jotu173 it was initially ment to be funny using fruit as a pointer but by the end it became what it became.
@jotu173
2 жыл бұрын
@@toolsandtrash6911 I thought I saw tiny blue cheese bowls and what looked like chicken-ish stuff. Like I said, the WEIRDEST tool review ever!
@brandonherreraofthenorth7143 жыл бұрын
Am I the only one who pronounces knipex like knife? Maybe I'm just too Canadian. They look way crustier than my groove locks, were they in the seconds shit bin.
@Youronlydaddy2 жыл бұрын
I wouldn't buy a tool with that big of a forehead in the jaws anytime soon, it probably takes more space around a nut then my 24" stillsons, back to the drawing board for Irwin.
@Axe14012 жыл бұрын
Nothing worse than junk tools. I have not had good luck with any Irwin tool. Glad I passed on these pliers at $8.89.
@CPLBSS883 жыл бұрын
Another great brand, on the verge of being ruined by global corp. Sigh. Oh well
@toolsandtrash6911
3 жыл бұрын
To late
@jeffhower81512 жыл бұрын
They are crap.
@milwaukee_695 ай бұрын
Bad luck with your pliers (w/a/r) my grove locks work great.
@milwaukee_695 ай бұрын
Bad luck with your pliers (w/a/r) my grove locks work great.
Пікірлер: 109
3:05 I can confirm that they are made in China 😂
@toolsandtrash6911
3 жыл бұрын
Thank you!
@brayancolin9377
3 жыл бұрын
A tip: you can watch series at flixzone. Been using them for watching a lot of movies these days.
@parkerzayden7689
3 жыл бұрын
@Brayan Colin Definitely, I've been watching on flixzone for since december myself :D
@YesImhymn
3 жыл бұрын
@@brayancolin9377 enough with the scam sites
@b-2466
3 жыл бұрын
@@parkerzayden7689 "for since december" 😂😂😂 GTFOHB
The Irwin looks like what's happens when you let two cousins get married...
@toolsandtrash6911
3 жыл бұрын
😂😂
@nateb4543
2 жыл бұрын
True love?
I died when the banana showed up on screen 🤣
I am an industrial mechanic and have both of these. I can definitely say the Irwin's are a good quality for the price. The knipex pliers wrench is top model tho
@ruzziasht349
2 жыл бұрын
Sorry, I don't believe you... Irwins are Chinese trash
@esl4058
Жыл бұрын
Completely agree. I’m an electrician and Irwin is by far my fav brand when it comes to price. Knipex are of course great but that’s like comparing a 2023 Porsche to an 87 Volvo lol.
I don’t care for tools that don’t work! I appreciate your time making tools fail!
Can you do a review/comparison viseo on Gedore's pliers wrench and compare with other equivalents?
The milks gone sour...I don’t mess with the Irwin pliers
@toolsandtrash6911
3 жыл бұрын
Yogurt
That's an intriguing failure. At around 4:57 the teeth you pointed at have about a third of their area stripped indicating that the teeth do not mate all the way across, that would be a pretty fundamental design flaw.
@toolsandtrash6911
3 жыл бұрын
I agree they really should reach across that whole channel for better strength and durability
The banana and kiwi was hilarious bro!!!! Thanks for the morning laugh
Never used either of those models but I’ve had a pair of Irwin dykes and Irwin “channel locks” that I’ve used for years. Irwin makes great stuff for the price.
So if irwins are roughly $15, knipex are $45, and quality matches price; are there any comparable items that are like $25ish. Knipex set of 3 is $165 on amazon right now
That's one thing you're Knipex will never do!
Knipex actually specifies the 250mm pliers wrench for up to 1 tonne (2204lbs) of jaw clamping force.
Dam. I threw the packaging away so it’s too late to return them...If mine ever give me issues I’ll warranty them. Thanks for this video!
Appreciate the review. Craftsman V Series pliers have the same action, have you tried those? Thanks again for the review
Nice to see ya back in business
@toolsandtrash6911
3 жыл бұрын
🤝
I have the same irwin pliers and my experience is the same as yours, with light use the teeth took a shit. I agree in this case the extra cost of knipex 100% makes sense. That design with the teeth on the side doesnt seem to hold up well. By the way i recently purchased the wiha 32948 insulated linesman pliers, and I am in love with them, but I am just a DIY who enjoys nice tools, would you be willing to test any of the wiha pliers at your job? Id love to see how they hold up in real world conditions with daily use. Also keep it up man, your reviews are the best, the guys that just show me a brand new tool, doesn't tell me shit. However seeing a bad ass maintenance mechanic beating the shit out of something and it holding up makes me feel way more confident in my purchases.
@toolsandtrash6911
3 жыл бұрын
Thanks dude! 😊 and I have a list of suggestions I will definitely look into those! I'll post a picture when I get them! 😁 I do enjoy wiha tools tho
I have both of these wrenches and use them both daily. I haven't had them fail on me yet. They both have their pros and cons. You must have gotten a lemon though, or torqued the wrench too hard, or both.
Interesting. Might be ok for home use . I will stick with knipex. I find I usually run into something that is tight or needs a little extra to break it loose. And knipex gives me that extra!
@toolsandtrash6911
3 жыл бұрын
I agree 👍💯👏
So when you are up on a platform getting paid to turn valves off and your new, bargain pliers fail miserably at leas you can say "but they have a cool color scheme on the handle!". Seems worth it.
@toolsandtrash6911
3 жыл бұрын
My point exactly 💯
@VoiD1x
3 жыл бұрын
What job would that be, gasfitter or something industrial?
@toolsandtrash6911
2 жыл бұрын
@@VoiD1x industrial refrigeration
If you can get the VBW / Stahlwille pliers wrench (they are the same tool just a rebrand), I would be very interested to hear your thoughts on those. I own both them and the Knipex ones and while I don't use my tools as hard as you. I believe the VBW ones to be superior but won't know for sure unless they get pushed really hard!
@anthonyquinlan975
3 жыл бұрын
I have both I prefer using the vbw but it's just personal choice knipex opens wider on the same size tho and the handle material on vbw just falls apart.....
@toolsandtrash6911
3 жыл бұрын
I have those lined up to buy I have had these suggested several times 😊
The only issue I have with my Knipex is you have to have the jaws in a precise position to adjust the jaws. I seem to have to play with them more than I would like. The Cobra's give me no issue.
Many of the modern Irwin tools are being made in China and they must have a little better quality control and manufacturing specs because all the ones I’ve bought have held up quite well I am a retired Woodworker and I do almost all my own plumbing , electrical ,and mechanical work and repairs myself so I keep and use a wide assortment of tools and do prefer higher quality as a general rule as I want mine to last for many years of service
Buy right or buy twice
Wow, guess I'll be getting some Knipix. Thanks for sharing. #PEACE✌🏾
I thought about buying these at Lowe's but, I stopped myself. They do look wonky. Too bad they failed, it would be nice to have a Knipex alternative pliers wrench.
@toolsandtrash6911
3 жыл бұрын
Yes that's what I was hoping they would be
@b-2466
3 жыл бұрын
Lennox
@jonhvac
3 жыл бұрын
@@b-2466 Lenox is owned by the same company Stanley Black & Decker) and their pliers wrench is just larger and nickel plated.
Do the grips fall off? I need to know! 🤣🤣🤣
@toolsandtrash6911
3 жыл бұрын
Nope! But the button does! 🥲
Just looked at both off these models yesterday at mennards. The Irwins were $9 after the rebate. Couldn’t justify paying $50 more for what little I’ll use them.
@ruzziasht349
2 жыл бұрын
I bought the Knipex as I couldn't justify give my money to China
@kross1261
2 жыл бұрын
@@ruzziasht349 you do realize they’re made in Germany? Also unfortunately a lot of items in most are made in China if we like it or not.
@ruzziasht349
2 жыл бұрын
@@kross1261 My pair of Irwins said "made in China" on the packaging. Germany is well known for quality engineering, plus they're an ally.
Do you know that the Irwin pliers are supposed to close without pressing the button? It’s an auto adjust feature so comparing these to the pliers wrench isn’t an apples to apples comparison. Don’t get me wrong I love my Knipex comfort grip 7.25” pliers wrenchs, but to me it looks like you don’t know about the Irwin’s auto adjust feature on these pliers. The Irwin V-jaw pliers don’t have the auto adjust feature on them & that’s probably why you would think these were supposed to behave the same way. & I don’t think Knipex has made an auto adjust pliers wrench yet, they have cobras that auto adjust but that’s it I believe.
Same kind of design as those channel lock 430 things you had before and also look like something from my kids Bob the builder tool belt....
@toolsandtrash6911
3 жыл бұрын
Yes it is similar but the channel locks don't have the auto ratchet close feature you have to press the button for them to adjust
@anthonyquinlan975
3 жыл бұрын
@@toolsandtrash6911 and they're just as shit tho.... Think I'll stick to my VBW's and knipex...
Bro you need more subs! 🤣
@toolsandtrash6911
Жыл бұрын
😩
@MadMetalShop
Жыл бұрын
@@toolsandtrash6911 +1👍
@MadMetalShop
Жыл бұрын
@Tools and Trash ... I do mostly dumb shit but every once in a while I have something interesting 🤷♂️. Gun builds fabrication fucking off in general bs like that 😊. Stop by if you like.
@toolsandtrash6911
Жыл бұрын
@@MadMetalShop I’ll check it out tonight!
I see what you did with the banana and kiwis! Lol
@toolsandtrash6911
3 жыл бұрын
I have no idea what your talking about 😌
@mommy7978
3 жыл бұрын
@@toolsandtrash6911 right🤔
Looks like it was made in a medieval foundry.
Really the baseline criteria for a functional tool aren't that high, holding on to a fastener without disintegrating is kind of a big one though. I'll hold on to my € 1,89 sloppy adjustable wrench from the grocery store for now.
These wrenches ain't angled right to get into anywhere with a lot of force applied. I got a set of knipex but finding myself reaching for my Cresent a lot more.
👍 ℹ️
That's sad for an Irwin product.. Most of my Irwin tools are pretty good quality, but those look like Kmart made them.
Yeah warranty doesn't make a tool great, you don't want to be all the time going to change your tools because they break when working. The Irwin didn't look like it has a strong grip action like the knipex 10:1 ratio of the jaws
yo what's with the faint chicken pic in the bottom right
@toolsandtrash6911
Жыл бұрын
😂
Haha ,it looks they didn't even try on these
Bad luck with your pliers (w/a/r) my grove locks work great.
It's too bad they are crap, because I like the price and I like my knipex ones. Grom what I have seen no one else can get the pliers-wrench thing right it's kind of like buying locking pliers from anyone but vice grip (I know it's Irwin's) it's a waste of money
Vice grip had a good name once
@toolsandtrash6911
3 жыл бұрын
Yes they did back when they were made in Nebraska 💪
The only Irwin’s I own are the NWS rebrands. Pass on the crap Chinesium tools
@toolsandtrash6911
3 жыл бұрын
Yes sir
It's a shame they didn't last
@toolsandtrash6911
3 жыл бұрын
I agree 😔
Same thing happened to my irwin/vice grip cobra wannabees within a couple weeks. Junk junk junk.
@toolsandtrash6911
3 жыл бұрын
Yes! I had the same experience!
The only good thing about those irwin is the grips.
@toolsandtrash6911
3 жыл бұрын
Indeed
It's a shame what happens to the name vice grips I prefer knipex over them
@toolsandtrash6911
3 жыл бұрын
So do I
Simultaneously good and the SUPER -WEIRDEST tool / tools (pun intended) video I have ever seen. Never seen a banana and ?Kiwi? s incorporated in a hand tool video. It seems way to coincidental that at 3:15 a banana appears (strangely) out of no where into close range and shortly after a Kiwi is shoved into close range view until being united with a 2nd Kiwi in a phallic configuration at 4:11 and left on screen for the rest of the video. Later at 8:04 (when banana and Kiwis are disrupted) you claim you just "bruised your banana" and make sure they are back in a perfect phallic shape. Did you use the banana because you were fresh out of egg plant??? Either you are A) just plain bizarre B) trying to increase viewership through subliminal messaging OR (for whatever strange reason) C) doing your "tool" review innocently among 3 pieces of fruit that you like to keep really organized. If "C" is your answer, you might want to STRONGLY consider seeing a therapist. Either way, (in my opinion) there is one to many "tool" s in this video... OK review, but VERY freakin weird video in my book... jus sayin!
@toolsandtrash6911
2 жыл бұрын
Can't stuff just be funny? I mean you watched the whole thing it seems 🤷 mission failed successfully?
@jotu173
2 жыл бұрын
@@toolsandtrash6911 So you admit it was done purposefully then? I am just surprised that (I think) It took almost a year for ANYONE to notice / say anything. I admit, I was almost done watching and on to the next video, before I realized anything was going on and then only faintly suspected something beginning with, "that's weird, a banana and Kiwi on screen in a tool review video"... until I rewound and FFwd it and looked at key parts of the video again. for most of the video I was trying to figure out what is the almost transparent graphic you have in bottom right corner (and still don't know what it is). What is the graphic? FYI I have 25 years advertising experience, so the subliminal thing quickly got me going.
@toolsandtrash6911
2 жыл бұрын
@@jotu173 the graphic you see in the corner is a picture my 20 piece wings I got from Buffalo wild wings a few years ago
@toolsandtrash6911
2 жыл бұрын
@@jotu173 it was initially ment to be funny using fruit as a pointer but by the end it became what it became.
@jotu173
2 жыл бұрын
@@toolsandtrash6911 I thought I saw tiny blue cheese bowls and what looked like chicken-ish stuff. Like I said, the WEIRDEST tool review ever!
Am I the only one who pronounces knipex like knife? Maybe I'm just too Canadian. They look way crustier than my groove locks, were they in the seconds shit bin.
I wouldn't buy a tool with that big of a forehead in the jaws anytime soon, it probably takes more space around a nut then my 24" stillsons, back to the drawing board for Irwin.
Nothing worse than junk tools. I have not had good luck with any Irwin tool. Glad I passed on these pliers at $8.89.
Another great brand, on the verge of being ruined by global corp. Sigh. Oh well
@toolsandtrash6911
3 жыл бұрын
To late
They are crap.
Bad luck with your pliers (w/a/r) my grove locks work great.
Bad luck with your pliers (w/a/r) my grove locks work great.