🔧iPhone X & XS Max Glass Only Replacement - home solution👍
Ғылым және технология
Impossible? No way! Repair made at home 100% success :)
Watch carefully 😎
Remember to not mistake the screws! It is possible to break the motherboard!
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
1. Turn of the phone and take off the screen of the frame.
2. Dismount sensor flex from the top of display.
3. Cut the metal frame on the top and take it off from OLED (use cutter, isopropanol or PCC15 spray, and something thin).
4. Heat the phone to 80°C (You can use hair dryer) and then cut the glass using molybdenum wire).
5. Clean the screen (use isopropanol or just take off the glue with Your fingers, and glue new glass to the screen - better use LOCA that don't need UV lamp (link below).
6. Glue new metal frame to the display (use B-7000 or T-7000 glue).
7. Put E-8000 glue on the phone housing and mount the new screen.
You will need hair dryer (or heat plate if You have), Y screwdriver, * screwdriver, metal thin tool (You can find in first link), LOCA glue, LOCA remover, E-8000 or T-7000 or B-7000 glue, molybdenum wire, new glass and new matal-plastic frame. Thats all :)
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
MUSIC:
Track: Altro - Epic [NCN Release]
Music provided by NoCopyrightNation
Watch: • Altrøx - Epic [NCN Rel...
Stream/Download: ncn.ffm.to/altrox-epic
Пікірлер: 561
Jestem pod wrażeniem, gratuluję umiejętności i życzę sukcesów w pracy.
Very inspirational for the repair community!!!
not sure why people are afraid to speak in tutorials like this. Many important things could probably be passed to the viewer by the power of speech.
@JerryMobilePL
4 жыл бұрын
You are sure, but my English is not perfect and 90% of my subscribers are from USA 😀
@salomonkane8359
4 жыл бұрын
@@JerryMobilePL I love you. Amazing video.
@penhi-tech1806
4 жыл бұрын
I don't agree , I hate it when people keep talking, watch and observe, that's all you need.
@mohammadullahnasrat8022
3 жыл бұрын
Don't you see that the video is running few frames faster than the normal? If he would have talked he may sound like baby chick;😉, I would rather subtitle for crucial Points!
@knexfan100
3 жыл бұрын
@@JerryMobilePL The guy that taught me how to solder new charge ports to phones had a thick arabic accent and defaulted to speaking arabic halfway through... I still learned just fine and still use that skill for my repair shop years later. Broken english is better than nothing. Spoken repair videos are always appreciated.
What was the tool you were using on the oled after you had removed it from the glass with the wire, to remove the adhesive
YEAH, NO OCA/DEBUBBLER MACHINES NEEDED. THIS IS VERY HELPFUL. THANKS A LOT
Polak robi niemozliwe naprawy.Podziwiam i gratki ;)
@JerryMobilePL
4 жыл бұрын
Dzięki 😁 Pozdrawiam również
@kacper2290
4 жыл бұрын
ja w lonynie i iphone 6 robie
@Monsster777
2 жыл бұрын
Jaki koszt u ciebie takiej operacji?
I can definitely do this at home 😂
@ayaan4594
3 жыл бұрын
Hey I’m only 13 I have repaired and fixed more than 30 iPads and 3 phones at home it’s really easy if you learn how to do it better try it on a spare phone that you have ?
@tobiasgingerich5731
3 жыл бұрын
@@ayaan4594 yes because we all have glue remover a heating element a a screen glass guide and all the other hand tools at home and we can’t forget THE HEATING ELEMENT
@ayaan4594
3 жыл бұрын
@@tobiasgingerich5731 my phone is in an repair shop right now never mind 😂😂😂🤣🤣🤣🤣
@Codeinjection
3 жыл бұрын
Man i just felt now dropped my iphone x so hard to the ground its cracked on the side a bit pff..
@azharsaleem6436
3 жыл бұрын
After watching you have to say thanks
Where did you get the mold and clamps?
What tool did you use that spins and take off the glue?
Yes yes finely I found this video. I was looking year by year how to fix iPhone screens with loca glue. Because the bubble and laminator machines are really expensive. And this is the cheapest way. Thank you man for this video. You save me a lot off money with the expensive machines. Thank you again 🔥🔥🔥🔥🔥🔥🔥🔥
thank you for this video. listening to your music really helped me learn what you used, how to properly pop the screen off, what each thing I'm removing is. love the abundance of plentiful information. I don't even need to search for a whole different video with more information
@henryjohnston6782
2 жыл бұрын
Shush no one asked
@henryjohnston6782
2 жыл бұрын
Where does it say it was a tutorial?
@ronpalmer1371
Жыл бұрын
Yeah, He showed us himself doing it but no instruction on how to do it ourselves 🤷♂️ also some of the tools he used made it seem unviable as a home repair.
@jonanddy
Жыл бұрын
the music did that are you fr
Bardzo dobrze! I wouldn't think of going to these lengths to replace the digitizer.
Great video thanks for that👍 the screen replacement suggested in your description has oca glue on it.
@mrleet6247
4 жыл бұрын
Oooh I see now you can peel it off. My bad😊
Good job! Liked the video
Hey great video! What was that yellow spinning tool you used to get the screen cleaned off? Thanks!
@courtneythompson5067
2 жыл бұрын
Same thing I'm wondering. That thing looks amazeballs and would most definitely be a super handy tool to have in screen repairs. Please let us know what that tool is.
@quetal6737
2 жыл бұрын
@@courtneythompson5067 it is a oca remover machine
wow loca! i didn't see you for a years my good friend
Great work 👌🏻
Hi! How are you buddy? What’s the name of the silver caps caps you use for press the metal to the lcd? Thanks for response.
Thank you for sharing, this repair video sharing is very detailed and very helpful to me. Thanks again for your sharing.
What’s the tool that you used to pull off the glue on the digitizer called?
Mit was kleben sie das Glas auf den Bildschirm (11:58)? Würde das gerne zuhause machen aber weiß nicht ob man auch nur das Glas auf das Display kleben kann ohne diesen Kleber den sie als x aufgetragen haben. Ich hoffe sie antworten würde mir helfen ☺️
Is it only the outer screen I need to purchase or the whole digitizer ?
Nice. where do you get that glass, glue and those tiny fastners..please provide link..
Dasz link do tego stelażu do leczenia wyświetlacza że szkłem?
What’s the tools used to clean the lcd
you are a genius
why do you take apart the inside of the panel when you change the windshield. thank you for answer :)
How much does it usually cost? My iPhone xs max only have a cracked outer glass.
If i send you my screen, How much would you do this repair for?? You got a link??
@arthurhernandez4527
3 жыл бұрын
got you for $80
@mambrake
3 жыл бұрын
@@arthurhernandez4527 you late brother
@arthurhernandez4527
3 жыл бұрын
@@mambrake lol just seen bro follow me on Instagram twitter facebook or tiktok @lafinestrepair
Why do you have to take off the supporting frame? For me it seems that it is only connected to the back
為になりました。ありがとう!
18:25 używasz kleju E8000- polecasz to rozwiązanie niż te wycięte uszczelki z niebieskiej folii??
Bomba robotaa.. Bardzo pracochlonna i trzeba byc bardzo ostroznym i precyzyjnym. Mam putanko czy konieczne jest demontowac “bezel frame” przed usunieciem szkla?? Czy mozna go zostawic i poprostu zajac sie usunieciem szkla od razu. Pytanie drugie dlaczego polowa wyswietlacza nie reaguje na dotyk po usunieciu starej szybki ?? :(
@JerryMobilePL
3 жыл бұрын
Dzięki 😁 Tzw bezel koniecznie musisz usunąć na początku, zastosowany tam klej nie jest typowy, jest on raczej podobny do kropelki itp. Nie pozwoli na usunięcie szkła w pierwszej kolejności. Często po zdjęciu szyby dotyk nie reaguje tak jak powinien, najlepiej go sprawdzić przytrzymując drugą ręką ekran bez rękawiczek, mimo to nie zawsze działa. Po naklejeniu nowej szyby czułość i działanie wraca do normy 😉
@bartekkarczewski2858
3 жыл бұрын
@@JerryMobilePL dzieki wielkie i ozdrawiam . Ja jednak dwa razy usunalem uszkodzone szklo bez problemu bez usuniecia “bezela” na pierwszy rzut oka brak jakich kolwiek uszkodzen, screen dziala popodlaczeniu przesuwa sie na boki ale gorna Czesc screena niestety nie dziala , ale dolna tak. I. to w dwoch przypadkach podobnie. Mam brak jakichkolwiek idei co do usterki .. wiec bede musial poprostu wieminic na nowy screen :( :(
@JerryMobilePL
3 жыл бұрын
@@bartekkarczewski2858 możesz wymienić też sam dotyk, spójrz u mnie w filmach jest o tym materiał 😁
@bartekkarczewski2858
3 жыл бұрын
@@JerryMobilePL No , no , widzialem ten filmik kolego. To juz dla mnie za duza wyzsza szkola jazdy,, te lutowanie pod mikroskopem, ,,szacunn.... Dla mnie testem mial byc moj pierwszy zepsuty screen i wyszedl calkiem spoko po sklejeniu .ale niestety z jakiegos powodu polowa tylko dziala :( tyle roboty....echh . ..
Hallo funktioniert das auch bei dem iPhone 11 hab eins günstig bei ebay gefunden mit kaputtem Glas
excelente trabajo !!!!
Like super hand 👍🏻♥️
Does it recovers the water resistance?
Nicely done ✅ but you could edit the video with some important tips, you didn’t had to say anything just some writing
Hi,can u please tell me how much it cost for glass replacement approximately
What is the name of the material used before pressing the glass and what is the device used?
Nice video!! One question, Do you need to cut/break housing to remove lcd? Cant you remove it without breaking?
@JerryMobilePL
2 жыл бұрын
Yes, it can be done. But only if the glass is not very hard broken :D Not cutting the screen frame needs to take it off uo, so parts of the glass will break the display.
Hola, a qué temperatura pones la máquina para separar el cristal?
@davidperplejo
9 ай бұрын
70 grados suele ser suficiente
Good job man. Lots of steps but job done ✅
Awesome thank You ❤️❤️❤️
What is the name of the thing that u use as housing while u put glue on it? That yellow thing?
Where to buy touch glass and frame
Guess the newer iPhone screens are made different? When i tried to use loca on iph6 lcds back in the day the glue would always get in the lcd and ruin the display
Polskiego się nie spodziewałem
@glebsokolov9959
3 жыл бұрын
О, тут даже поляки есть :)
I did the same now my i phone kinda laggs mainly the keyboard what do you think?
How do you get the connector on so quickly? Screen connection. I'm afraid that I will break it.
Donde te ubicas ?? Mi celular solo tiene daño en el cristal y no le quiero pagar a Apple por un cambio completo sigue funcionando todo
Sir my iphone X fell in water i went to the shop they said that the screen folder wil change but can this also cure my problem?
Do you find trying to repair glass without a laminating machine can be problematic as the resulting surface may not be perfectly flat? At the right angle, under right amount of light, this could be noticable when the phone is turned off?
@icy_bit7306
2 жыл бұрын
Use a book
Hi Jerry, where did you get the gold XS MAX screen alignment tool as shown at 11:15? Thanks
@reagandiaz3388
4 жыл бұрын
Chidzeyy to me it looks 3d printed.
@gazio6450
4 жыл бұрын
You Can easily find them on eBay :D Maybe search for something like glass screen aligner or something ;)
thank you
Price for changing glass of iPhone X plz tell
Can this be used for iPhone 10R
Jaka cena naprawy ? Bo mojej kobicie pekl i trzeba zrobic
How much would you charge to fix a phone? Cause I broke mine today. Since useless Verizon keeps giving me fixed phones instead of new ones. This phone already had a chip in the glass. That why it cracked in a few months. But yea I live in Virginia. I want to know how much you’d charge to replace the screen.
IS THAT UV GLUE? SAME GLUE FOR UV TEMPERED GLASS I WANNA TRY THAT ALSO SINCE I DONT HAVE AN OCA MACHINE FOR SCREEN LAMINATION
Is this compulsory to install new frame can we use old frame and when we remove display frame is it breaks that time or not
@grantharvey4838
3 жыл бұрын
Late reply. But yes you can use old frame
Loca which dont need UV light better then which need UV light or light its just knly difference?
Can we replace the front glass of gx display?
Is this possible for an iPhone 12 mini in the same way?
Beautiful.
Waaaw excellent 🙊🙉🙈👏👏👏👏👏👏
I want to learn this kind of repair i hope we can meet in the future to learn more things about this thank you
@JerryMobilePL
Жыл бұрын
Soon will be complete 10 videos about screen refubrish, with subtitles and detailed 😉
Hello dear, i went to change the glass in a repair shop, but it's showing a warning message "unable to verify this iPhone has a genuine Apple display". Did the repair shop changed my original screen or it's a normal thing. thank you
Hey dude, what's the name you used for glue remove?
@ernec.5326
4 жыл бұрын
You can use lighter fluid just completely remove it with 99.9% alcohol.
True Tone and face id désactiver or no ????
Sir where u from i want to repair my iPhone kindly inform me...!
Thanks
why didn't you cure the loca while the screen and glass were in the alignment frame?
@paweadamowicz2034
3 жыл бұрын
Thats exactly what i thought
nice totally home made
So after separating and removing the loca you used IPA to clean the excess off of the lcd? Or was it something else?
@JerryMobilePL
4 жыл бұрын
Yes it's IPA
@kacper2290
4 жыл бұрын
its oled
Hey Jerry! Nice educational video. I wanted to replace my iphone x screen.. but isnt it possible to just do step 4 and 5? I wanted to ask why you removed the speaker&sensor assembly and why the frame got replaced as well. Thank you!
@ifixall5658
4 жыл бұрын
Josh Tai bcaz if you don’t take them might be going to damaged if the sensor damaged also Face ID no more works. Frame should be take out otherwise you can take the glass out also won’t inside the mould
What glue did you use to connect the screen?
@kurtba8180
3 жыл бұрын
I suppose that’s loca glue
Kozak gosc szkoda ze nie wiedzialem ze to mozliwe xaplacilem krocie za serwis screen plus robocizna a na koncu koles ;;yeah it’s ok you will get used to it without Face ID,, ps ile taka naprawa koszt mniej wiecej.? Pozdrawiam
@JerryMobilePL
4 жыл бұрын
Dzięki 😁 Koszt w granicach 500 zł, ale po naprawie WSZYSTKO idealnie działa :D
@turekkris853
4 жыл бұрын
A zapacilem ok 1000 pln ,no coz madry Polak po szkodzie
@JerryMobilePL
4 жыл бұрын
Życie, samo życie 😏 Na przyszłość zapraszamy, serwis Pama Białystok 😊
Hi... where we can find .. the glass for iPhone X? Do you some store?
@Guyindrip007
3 жыл бұрын
Ebay just search front lense glass
Sir I also wanted to replace my front glass of I phone x
Will truetone still work if the glass is replaced? thank you in advance for the answer^_^
@JerryMobilePL
2 жыл бұрын
Yes of course 😉
Ile taka wymiana szyby u pana ?
why did you and all others in other videos remove the metal bezel before removing the glass ? what could be the problem if it wasn't removed ?
Perfekt 👍👍👍
Hallo das was du macht ist klasse mein iPhone Startet nicht wollte gerne fragen wo wohnst du und ob du sowas reparieren kannst bitte lieben Gruß Prosze o odpowiec
Display quality will be good rght?
Czym przykleiłeś szybkę do wyświetlacza ?
Can I use LOCA TP 1000N ? Do u recommend?
@JerryMobilePL
3 жыл бұрын
You can, but better is 2500
whats the Holder your using for the phone when you put the new screen on?
@chordswardfelicia4475
2 жыл бұрын
Read the discription
@Scottsman1992
2 жыл бұрын
@@chordswardfelicia4475 I read the description they don’t say way that gold piece was that he set the screen in to put the new glass on so before you try to get smart in the comment section be sure you got the info to support your response 👌🏻
gooood sir thank you
直接用胶水粘吗?
You are great
number one ;)
Why did you make a glue when you closing screen what if you crack it again just use tape
Please tell me the any shop location in pakistan where I can get that option 😢😢
Us technicians have a love hate relationship with adhesive.
@pr3ttysus922
4 жыл бұрын
So true 😂
@raywilliamjohnson47
3 жыл бұрын
I can’t attest to this lol
Why the use of the mould if you just lifted off before it setting?
❤very good
What is the proper name for the gold plate that the iphone is put in while you add the loca and glass?
@JerryMobilePL
4 жыл бұрын
This is lcd mould 😉
Mujhe bhi change karwani hai kitna price hai change karne ka plz reply