I am going to tackle this project this weekend. Thank you so much!

FINALLY!!! A video that shows us not only how to take these damn things apart, but more importantly, how to put them back together again! THANK YOU!

@iDoctorUK

Жыл бұрын

I’ve noticed this in lots of other vids so thought it would be important to include

@michaelscottland4239

4 ай бұрын

@@iDoctorUKYour thoughts are very much appreciated.

I did it for the first time by watching you and it works! I appreciate that👊🏻

Very well explained tutorial! everything went fine after following all instructions! keep going that way :=)

thank you for that instruction. I tried other Videos but this one nailed it ... excellent : )

Cant thank you enough mate. I'm in the middle of northern Europe and the nearest phone service is 45 km away. That means I need to drive there and back and return to collect in a couple of days so 180km all in. I managed to sort it thanks to your vid, so in off ice fishing tomorrow as planned, your a star.

@iDoctorUK

6 ай бұрын

Enjoy your ice fishing!

@gee3883

6 ай бұрын

@@iDoctorUK cheers again .

Those 2 cables u said that are tricky I pushed to hard n snapped the top of what of them do I have to buy a new board or is there a trick to fix it bc my phone don't light up at all

Thank you, thank you!! Emphasis on keeping tiny, micro screws organized lol each are truly different. Handy shortened (many steps saved) and genius trick for placement! 😊😅 all went well w ifixit kit. Thanks so much for your tech knowledge 🎉 and sharing 😄

@iDoctorUK

9 ай бұрын

You’re very welcome

What if touch ID button stopps working / vibrating after this replacement.... Tried rebooting, updating software, and taking connectors of screen on and off but no luck...

Thanks for a very well explained video , and mentioning the pitfalls ( like screws ) it seems very hard eh ! but you make it look so easy , how long does this take can you tell me If done by mr average guy ? Thanks :)

Thank dude.. I did it perfectly ♥

Beautifully Explained !

@iDoctorUK

9 ай бұрын

Glad you liked it

Great job! Thank you so much.

@iDoctorUK

7 ай бұрын

You're very welcome!

Txh bro btw where to buy if one of the cable are broken or ripped of

thank u😊

N is there a trick to use these magnetic tools bc at times its a pain in the ass especially with the ground piece

What the required voltage on the battery connector on the board? The iPhone i have only shows 3.7 volts.... which apparently is not enough to charge the battery

can this be done using another iphones port

with this video i was able to fix my phone which i had written off. thank you very much..

Thanks this was really helpful! Though, the process has also renewed my hate for Apple. Apparently my power connector was 2mm to far forward so I had to pull half the thing apart a second time. I swear my Note 9 used about half as many of the *same* philips screw. Not to mention less glue and more cooperative connectors.

@iDoctorUK

Жыл бұрын

For sure, it is tricky to get it lined up right first time

The wire i snapped can i use one from a 6 iphone

How do I fix baseband problems on iPhone 7 plus

Where is the link for the port. I need to buy.

Any tips for where to get an affordable set of screwdrivers? I mostly fart around with repairing vintage computers but am looking to branch into phones and stuff.

@iDoctorUK

Жыл бұрын

An ifixit kit would be ideal for what you described

I just completed my swap! I bought a couple of cheap dead phones off eBay and practiced several times. The videos that show removing the logic board and all the other components at the top of the phone were overwhelming. (I’ve swapped the battery before and that was easy in comparison). Anyway- your “slip it under the logic board” method is pure genius! Thank you!!❤❤

Dear bro i am from india i have iphone 7 but charging port is not working can you please fix it

I put everything back but now it won’t turn on which plug is it for power

@trixcylynsanchez932

13 күн бұрын

same

luckily the charging port is not built in board otherwise you'll have to disolder it most difficult ever, cause corrotion or dirty port connection is one of the problems

Where did you get the part from the charge port?

@user-xe6ob5hk5q

Жыл бұрын

Amazon but make sure it right model number comes with kit mb 12 to 14$

After doing this my screen doesn’t work..

Ok

Example of a non-serviceable product

my loud speaker screw stripped😩 how can i fix this?

@cattycharo7958

3 ай бұрын

You can buy replacement screws.

@musicviolamusician4392

3 ай бұрын

@@cattycharo7958 update I just didn’t use them and it worked lol

wow

@iDoctorUK

Жыл бұрын

I hope it helped!

❤❤

what liquid did you used?

@iDoctorUK

7 ай бұрын

Isopropyl alcohol

Repeat price sir😢

and I just killed my phone. I took the 2 screws out, opened my iphone very slowly like a book, and broke a ribbon connection. The other ribbon connection is fine. I only see one in this one that you used. I have an iphone 7 plus as well.

@iDoctorUK

4 ай бұрын

There are 3 cables in total that connect from the phone to the back of the screen. It isn’t completely killed though. The screen is replaceable too!

If you need a helper for work plz contact me. I repair phones too. N im also educated enough to talk in English 😁

my mic doest work after i follow your tutorial😭

@iDoctorUK

10 ай бұрын

Maybe it is a faulty part?

Jerry Clarkson?

@iDoctorUK

Жыл бұрын

Haha he has given up cars and farming for phone repairs

sorry bor forgive me

The🎉🎉🎉🎉🎉🎉 🎉