iPhone 15 Pro Max - DIY MagSafe 2TB Storage for ProRes Recording.
Ғылым және технология
Here is my super minimalist magsafe external storage contraption that gives me 2TB external space to record into. Here are the ingredients:
Tiny External Drive:
2TB: amzn.to/3PsiOqu
1TB: amzn.to/46nmLni
MagSafe Sticker: (Remember what I said about the magnets)
What I used in the video: geni.us/MomentMagSafeSticker (Read below, I took this out later)
But then I ended up using this (it is much better): amzn.to/3t8aXa7 This is stronger and thicker, which gives a nice airflow between the phone and the ssd.
The cable I used: amzn.to/3PEteU6
There is also this one, it is faster: amzn.to/3Q0IhZy
Moment Mobile Filmmaker Cage: geni.us/02ihi
🎥 MY MAIN CAMERAS
🟠 Sony Alpha 1 - My Review: • Sony A1 - The Review
🛒geni.us/sonyAlpha1
🟠 Sony Αlpha 7S III - My Review: • Sony A7s III Review - ...
🛒geni.us/sonyalpha7sIII
🟠 Sony Alpha FX3 - No Review Needed :)
🛒 geni.us/Sonyfx3
🟠 Sony Alpha 7 IV - My Review: • Sony A7 IV Review - It...
🛒 geni.us/sonya7IV
🔭MY MAIN LENSES
🟡 Sony FE 50mm F1.2 GM - Studio, Talking Head
🛒geni.us/sel50f12gm
🟡 Sony FE 24-70mm F2.8 GM II - My Review: • Severance Elevator Eff...
🛒geni.us/SEL2470GM2
🟡 Sony FE PZ 16-35mm F4 G - My Review: • Beginners Guide to Son...
🛒geni.us/selp1635g
🟡 Sony FE 20mm F1.8 G - Vlogging, Outside
🛒 geni.us/SEL20F18G
🎙️AUDIO
🟤 Sony ECM-B10
🛒 geni.us/SonyECMB10
🟤 Sennheiser MKH 50P48
🛒 geni.us/MKH50P48
🟤 DJI Mic - My Review: • DJI Mic - Everything I...
🛒 geni.us/DJIMIC
🟤 Zoom F3
🛒 geni.us/ZoomF3
🟤 Sony ECM-B1M
🛒 geni.us/SonyECMB1M
🟤 Sony ECM-G1
🛒 geni.us/SonyECMG1
🏮LIGHTS
⚪️ Aputure 300D II - Key Light
🛒 geni.us/AputureC300DII
⚪️ Amaran P60x - Fill Light
🛒geni.us/uflA
⚪️ Amaran 100d - Hair Light
🛒geni.us/Amaran100d
⚪️ Amaran P60x - Desk Light
🛒 geni.us/amaranP60c
⚪️ Amaran COB 60d - Desk Light
🛒 geni.us/AmaranCOB60d
⚪️ Aputure MC RGBWW
🛒 geni.us/AputureMCRGBWW
⚪️ Aputure B7c
🛒 geni.us/AputureB7c
⚪️ Aputure MT Pro
🛒 geni.us/AputureMTPro
📷 Other Cameras
🟣 Panasonic Lumix S5 II - My Review: • Panasonic S5 II - Revi...
🛒 geni.us/LUMIXS5II
🟣 DJI Action 2 - My Review: • DJI Action 2 - Tiny 4K...
🛒 geni.us/Action2
🟣 Insta360 X3 - My Review: • Insta360 X3 First Look
🛒 geni.us/Insta360_x3
🧩 VIDEO Editing
🔵 Final Cut Pro
🛒 bit.ly/FinalCP
🔵 Yanobox
🛒 www.yanobox.com
🔵 FxFactory
🛒 fxfactory.com
🔵 ProSoundEffects
🛒 www.prosoundeffects.com
🪑MY CHAIR:
🛒SecretLab Titan bit.ly/SECRETLAB
FOR MORE CHECK OUT MY KIT PAGE: kit.co/iPhonedo
Come say hi:
🕺 / iphonedo
📷 / ayfondo
DISCLOSURE: THE LINKS IN THIS DESCRIPTION BOX CONTAINS AFFILIATE LINKS. I GET A COMMISSION IF YOU DECIDE TO MAKE A PURCHASE THROUGH MY LINKS AT NO EXTRA COST TO YOU.
Пікірлер: 553
I'd like to mention couple of things - How long can you record? Watch this: kzread.infoKTsaGILYUCA - SSD is not affected by magnets, just like the storage in our phones. (HDD is affected by magnets) - While filming the SSD drive is not in the shot, cameras are moved on iPhone 15 Pro series compared to 14 and prior. - I ended up using this amzn.to/3t8aXa7 as the magnet on ssd, which is a lot stronger and thicker, but also it gives a nice space between the phone and the ssd for airflow. - You can transfer anything from your phone to the SSD, anything that gives you the option "save to files" - iPhone won't record raw photos to SSD but you can move them later on. - I haven't experienced any heat that may be an issue, but I haven't filmed for long periods of time. - The magnet sticker I used is strong enough to keep the drive on the phone, but if you like stronger, you may wanna check out the magsafe mount part of the magnet, however they're thick, so maybe the magnet from a wallet can be nice. - ProRes HQ are gigantic files because they're not compressed like H.265, which gives you great flexibility during edit (because almost nothing is baked into the footage) - I won't be saying heif in my videos. It is H.E.I.F (this one is for Apple :))
@electrosound4595
9 ай бұрын
Upload video in 60 fps
@iPhonedo
9 ай бұрын
@@electrosound4595 anything above 24fps is e-waste.
@markjones8121
9 ай бұрын
@@iPhonedook, fair comment, how about record in 4K60p until the SSD is full to see overall performance? Just asking.
@iPhonedo
9 ай бұрын
@@markjones8121 That's a great ideal, I'll try to make it happen.
@Designguidetv
9 ай бұрын
I was just about to ask every single one of these 'points'
This is the type of tech I like to see. How we should be innovative in using these gadgets is fun.
@TheRealMafoo
9 ай бұрын
lol, "innovative" might not be the right word. This is something that has been possible in the mobile phone space for many years. Just because you can now do it with an iPhone, does not make in innovative. :)
A friend and I were talking about this a few weeks ago. We also discussed picking up a small Magsafe wallet and slipping the SD drive into it. I think we are just minutes away from commercial products offering this option. Personally, I would prefer a Magsafe sleeve so I could put any small SSD in it.
@ashiq_r
9 ай бұрын
maybe cut a small hole at the end of apple wallet’s pocket. I have a spare, would definitely try. 😅
@MA-ij3sp
9 ай бұрын
I was just talking to a freind about this as well I thought I'll just find a big enough wallet and lo and behold the gentlemen here did a great implementation of that.
Love this. Great job, sir!
@iPhonedo
9 ай бұрын
Thank you kind sir :)
Can’t wait to see your full review. Nobody seems to do in depth and critical reviews the way you do.
Loved this. Got my 15PM today and am digging it... but moreso loving videos like this. I MagSafe *everything* and have so many metal rings and magnets so that everything sticks to everything, everywhere. I love this and will definitely be copying. Thanks!
you DIYed the thing that I was expecting other brands will comeup with soon.. This typec+magsafe gonna take accessories to new level
Your videos are so amazing. I love DIY stuff like this. Looking forward to more of your iPhone 15 content!
That's why I love this channel. Always makes sense, and creative. Been a fan for so long. More power. Cheers.
i was literally just thinking about designing something like this to 3D print on my drive home. You are the man!
Great video! The great case debacle is always a tricky one. But this is why open bottom cases are my go to. No lip on bottom to catch your thumb on up or down swipes, and ALL cable and accessories fit.
You stoled my heart with that amazing invention. Great Job!
Loving it :) A solution like this is what we need
Thank you for all your great videos, you’re so innovative and creative. Your videos are a breath of fresh air in a tech industry where everything said and shown is cookie cutter. I always learn something awesome from your videos. God bless.
@iPhonedo
9 ай бұрын
Thank you so much for your kind words! It is so nice to hear.
Record to ssd is the best feature about the 15 pros and 5X portrait shots with awesome depth to field
this looks so much classier than my rig did 😅
Good idea! Just be mindful of heat dissipation from both the back of the iPhone and the SSD. They can get hot when shooting/writing large video files.
@Russsssss
8 ай бұрын
And the magnetism too
@aerofly2
8 ай бұрын
@ Russsssss The T7 is an SSD and will not be affected by the MagSafe magnets.
@Russsssss
8 ай бұрын
@@aerofly2 Tks!
I had a similar thought but I just used a pop socket took off the bit that pops up to hold and sanded down the middle slightly raised bit and used a 3M disc to secure the drive to it. Works amazingly well.
And, now I have a use for one of my old SSDs. Thank you for sharing this.
I bought a bunch of MagSafe metal rings figuring I could use them for something someday. This is it! Thanks!
It’s great to see Faruk so excited about new iPhone season where other KZreadrs seem _stressed_ about having to release content on tight deadlines to appease the algorithm. 😍 Can’t wait for the iPhone 15 Pro Max in depth camera review. Would be awesome to see a camera comparison to a Sony Full Frame to know if Apple are closing the gap in quality. 💭
I love this so much!!!!❤ and only five minutes, chefs kiss
Absolutely loved this video!! Looking forward to your review!! It’s gonna be amazing!! Best regards from Germany!
Perfect! I’m scheming a phone rig like this, and this was an idea I was curious to see built out. Thanks!
Seen this trick in a few places, but it's a good one. Already had the drive so just bought the cable
This is a very neat trick . Thanks for sharing this with us. Will implement this as well
Great idea! Is there a way to get that working with an external mic like DJI mic or Rode Go?
@iPhonedo
9 ай бұрын
Yes there is, but it requires a hub. instagram.com/reel/CxrENzMv4Zt/
Fantastic news. Now, if you can connect a DJI wireless mic receiver to that same USB C port (via a hub) to record sync sound, we'll be golden. Looking forward to your complete review.
Thank you for the gear links. Exactly what I was looking for
Good diy job, continue to share new ones 👍
Genius sir. Genius 👏🏻🎬
Love this idea, would love to see a follow up if there’s any issues with overheating like this. I was thinking of using Velcro, but this is far more elegant.
great video good setup
Brilliant!!!
This dude is always doing something creative first and then I see others follow
Absolutely brilliant!! 👍🏼
I believe a MagSafe wall mount sticker would work well in this case. They would have the magnets aligned correctly.
@iPhonedo
9 ай бұрын
True, I ended up buying one of those.
@tomasvircik3742
Ай бұрын
🤔 I gotta check that. I have the magsafe ring with magnets on the side where the sticker is. What a nonsense 🤔 Thanks 😎
Ingenious - thanks for the tip!
This was a fantastic video and hella informative. Thank you!
This is what I want to see! I love it so much. Thank you Iphonedo❤
I was wondering the other day how long it would take for someone to release a MagSafe compatible SSD. Glad to see I was not the only one thinking about this.
Brilliant thinking!
Just wait for the cases that are coming 😊
You are always awesome !!
This is EXACTLY what I’ve had in my head. Thank you hahah
Great DIY. Apple should promote this more than titanium and other stuff. As an industrial designer I can see lots of potential to generate various ideas referring this concept.
Amazing idea !
Was going to do a similar setup with that mini samsung flash drive, saved me from wasting money on it, cheers!
This is exactly what I wanted to do as well. Amazing.
Great build, keep it up
Love your approach. 🎉
Kanka yapıyorsun bu sporu.
Thanks for sharing. Blessings on your day!
Nice tips. Thank you
I had a magnetic ‘sticker’ from a Prograde SD card reader which fits the Samsung T7 perfectly and works well on a case. Was just looking for short cables and you may have just solved that one for me.
I was thinking about this for a while now, but worried the magnets would mess up the SSD. Good to see this worked.
@wandidabula2726
9 ай бұрын
I was worried about the same but I did think maybe SSD might not be affected like spinning dives, google search confirmed.
@iPhonedo
9 ай бұрын
It won't. SSD is not affected by magnets, just like our phones' storage.
Very clever, well done done. A lot of people will be copying this idea.
Excellent work!
Great idea!
This is brilliant. I am sure companies will create magsafe ssd, and even magsafe case for popular ssd's
We need a usb-c hub case for “iphoneographers” ☺️ or similar. We need a compact way to attach the SSD but also charge the iPhone and attach a microphone (also a cable one)
@rolandomendoza5053
9 ай бұрын
Definitely, I can't find information anywhere on how to connect an SSD and a microphone at once.
@andreaturbolz3542
9 ай бұрын
@@rolandomendoza5053 👍🏻 me too
Finally a tech tuber that do tech stuff and not unboxing - thy
Very innovative - thanks
Very nice. Thanks for sharing.
Awesome, I have both and just about to try this out myself. :)
Well done, brilliant 🎉
Thanks from Brazil
Thanks for the video! How is the heating problem with this setup?
I just did the same thing, but with two velcro stickers on a $5 clear case, and an old Insta360 USB-C to USB-C cable 🤣 Works!
More like this please
I was thinking doing of this but completely missed the magnets being the wrong way so thanks for this!
This was awesome!!!!
Thanks for sharing, just subscribed. Can't wait to see your review video next. Stay blessed.
I love this DYI style to make it good without paying thousands of dollars video!!!
Can’t wait for your review. Always the one with all the juice 🧃
excellent video!
I’ve done something very similar with my Samsung T7, except I’ve used a rectangular metal plate (available very cheap from Amazon), made for use with Magmounts and magnetic car phone holders, which sticks to the drive with 3M backing tape, and because its very thin you hardly notice it. Although the plate is thin it sticks remarkably well to the MagSafe case on my iPhone15 👍
@Tendonz_
7 ай бұрын
can you link it
Love this video. Solve my External HDD issue. Thumbs Up!!!
Thanks sooo much!
Great idea!!
I hope for cases (looking line the old apple battery case) with storage capacity build in
great work. thanks
You did a great job again. you are special for me
Wow this is great
You NEED a case with the bottom connection section wide open. I have one with Magsafe clear cover case bought from the Apple store App.
Great video! It’s a real iPhonedo move that you made the effort to turn each of the magnets upside down ahaha :)
Great Idea!!!!!!
There is actually MagSafe ring to buy directly. Those are designed to stick to the wall then you can put you phone wall the wall in a magnetic way.
Looking forward to your next drone video :)
@xisanadu1
9 ай бұрын
Mehhhhhhhhhhh
love the Dave2D love 😆
perfect!!!
Perfect.
Brilliant ❤
Thank you
Love it, I'll watch your other videos...but I would love to know if you can record regular 4k footage to the external drive? Probably not, but I was just curious. Also, is there any manual or something that tells you how fast the drive needs to be? Could you just plug the drive into your Mac and start editing when you finish shooting? Thank you!
Brilliant
My man!
Abi herhangi bir videoya ilk defa ilk yorum yazıyorum djdh. Seviliyorsun❤
NICE!
Genius!!