Iodine Value: Dr. Bhushan P Pimple

Iodine number, Iodine value, iodine monochloride, PUFA analysis, Oil analysis, Degree of unsaturation, Dr Bhushan P Pimple
Related Videos:
1. Determination of length & width of fibers: • Determination of Lengt...
2. Determination of mean diameter of Starch grains & calcium oxalate crystals: • Determination of mean ...
3. Foaming Index: • Foaming Index: Dr Bhus...
4. Determination of Extractive values: • Determination of Extra...
5. Pharmacovigilance in Herbals (Part 2): • Pharmacovigilance in H...
6. Swelling Index: • Swelling index: Dr. Bh...
7. Ash Values: • Ash Values: Dr. Bhusha...
8. Pharmacovigilance in Herbals (Part 2): • Pharmacovigilance in H...
9. Hydro-distillation of Volatile oil: • Hydro-distillation for...
10. Thin Layer Chromatography: • Thin Layer Chromatogra...
11. Soxhlet Apparatus (Continuous Hot Extraction): • Soxhlet Apparatus (Con...
12. Unsaponifiable Matter: • Unsaponifiable Matter:...
13. Iodine Value: • Iodine Value: Dr. Bhus...
14. Saponification value & Ester Value: • Sap Value & Ester Valu...
15. Acid value: • Acid Value: Dr. Bhusha...
16. Isapghula: • Morphology & Microscop...
17. Ginger: • Morphology & Microscop...
18. Licorice: • Morphology & Microscop...
19. Rauwolfia: • Morphology & Microscop...
20. Cinchona: • Morphology & Microscop...
21. Coriander: • Morphology & Microscop...
22. Fennel: • Morphology & Microscop...
23. Senna: • Morphology & Microscop...
24. Nux- vomica: • Morphology & Microscop...
25. Clove: • Morphology & Microscop...
26. Cinnamon: • Morphology & Microscop...
27. Ephedra: • Morphology & Microscop...
28. Formulation and Evaluation of Taila (medicated oils): • Formulation & Evaluati...
29. Formulation and Evaluation of Bhasma: • Bhasma: Dr Bhushan P P...
30. Antioxidant Assay (Nitric oxide & Reducing Power Assay): • Antioxidant Assays (Ni...
31. Antioxidant Assay (Principle and Process): • Antioxidant Assay Prin...
32. In vitro Anti-inflammatory Assay: • In virto Anti inflamma...
33. In vitro Anti-Cancer Assay: • In vitro Anti cancer A...
34. Plant Allergens (Part 3): • Plant allergens (Part ...
35. Plant Allergens (Part 2): • Plant allergens (Par...
36. Plant Allergens (Part 1): • Plant allergens (Part ...
37. Cultivation, Harvesting and Storage of Herbal Crude Drugs (Part 3): • Cultivation, Harvestin...
38. Cultivation, Harvesting and Storage of Herbal Crude Drugs (Part 2): • Cultivation, Harvestin...
39. Cultivation, Harvesting and Storage of Herbal Crude Drugs (Part 1): • Cultivation, Harvestin...
40. Herbal NDDS (Part 3): • Herbal NDDS Part 3: Dr...
41. Herbal NDDS (Part 2): • Herbal NDDS Part 2: Dr...
42. Herbal NDDS (Part 1): • Herbal NDDS (Part 1); ...
43. Toxicity in Herbals & Herb-Drug Interactions (Part 3): • Toxicity of Herbal Dru...
44. Toxicity in Herbals & Herb-Drug Interactions (Part 2): • Toxicity of Herbal Dru...
45. Toxicity in Herbals & Herb-Drug Interactions (Part 1): • Licorice: Toxicities &...
46. Means & Methods of Structural elucidation (part 2): • Means & methods used i...
47. Means & Methods of Structural elucidation (part 1): • Means & methods used i...
48. Cosmeceuticals (Part 4): • Cosmeceuticals (Part 4...
49. Cosmeceuticals (Part 3): • Cosmeceuticals (Part 3...
50. Cosmeceuticals (Part 2): • Cosmeceuticals (Part 2...
51. Cosmeceuticals (Part 1): • Cosmeceuticals (Part 1...
52. Current Status of Indian Herbal Drugs: • Current Status of Indi...

Пікірлер: 22

  • @pranitatarde6238
    @pranitatarde62382 жыл бұрын

    Too best vdo for understanding... Thanks sir

  • @bhushansong

    @bhushansong

    2 жыл бұрын

    Most welcome, Pranita

  • @ishachouhan4271
    @ishachouhan42712 жыл бұрын

    such an amazing video....helped me alot thank you

  • @bhushansong

    @bhushansong

    2 жыл бұрын

    Glad it helped! Isha. Thank you for watching

  • @Learner_being

    @Learner_being

    2 жыл бұрын

    Sir can iodine value be used for triple bond unsaturated compound? Or we use this only for double bond unsaturated compound? Please tell.

  • @bhushansong

    @bhushansong

    Жыл бұрын

    @@Learner_being it is used for double bonds as they are commonly found in veg oils. I am not sure about its application in triple bond determination

  • @Mohinip140
    @Mohinip1402 жыл бұрын

    Very very nice explained

  • @bhushansong

    @bhushansong

    2 жыл бұрын

    Thanks and welcome.

  • @amoghamyakala
    @amoghamyakala7 ай бұрын

    Good explanation sir

  • @bhushansong

    @bhushansong

    7 ай бұрын

    Many thanks

  • @shipsi929
    @shipsi9293 ай бұрын

    Omega 3 is alpha linolenic acid!

  • @danielalvis5983
    @danielalvis59838 ай бұрын

    When we rinse the stopper with water, does the water mix with the solution or we rinse the stopper in the sink

  • @bhushansong

    @bhushansong

    8 ай бұрын

    Thanks for watching, Daniel. We should rinse with 15 ml potassium iodide solution and pour the rinsate in the flask. Potassium iodide dissolves all Iodine fumes those are trying to escape through the gaps of stopper & neck. This ensures accuracy in the Iodine value measurements.

  • @ramdaspatil3974
    @ramdaspatil3974 Жыл бұрын

    Sir for this experiment we use Iodine monochloride or Wij's solution

  • @bhushansong

    @bhushansong

    Жыл бұрын

    Thank you Ramdas. I've been using Iodine monochloride. It is corrosive and needs to be handled carefully (mask, gloves and glasses etc are advisable)

  • @polasadowska8076
    @polasadowska8076 Жыл бұрын

    What is the concentration of KI solution? Does it really matter in the experiment?

  • @bhushansong

    @bhushansong

    Жыл бұрын

    Many thanks Pola. A 10-15% w/v Aq KI solution would be sufficient. Purpose is to trap all Iodine fumes escaping from the gap of stopper & iodine flask.

  • @ninadphalke3187
    @ninadphalke31872 жыл бұрын

    Why ccl4 used? Why solution kept for only 30 min ?

  • @bhushansong

    @bhushansong

    2 жыл бұрын

    CCl4 or chloroform acts as diluent, it also provides a common medium for the reactants to react. (or else, oil will float on the water and cannot react) Thirty minutes is the maximum time required for I-Cl to bind with the double bonds of oil. It ensures that binding is complete (for 1 g of oil).

  • @niranjini.achemistrydepart300
    @niranjini.achemistrydepart3002 жыл бұрын

    Why are you use 0.1 M sodium thiosulfate

  • @bhushansong

    @bhushansong

    2 жыл бұрын

    Na2S2O3 sodium thiosulphate (one of the few stable reducing agents) converts (reduces) iodine to iodide form. Na2S2O3 first reacts with iodine before iodine (I2) can form a complex with starch to give (blue-black color). Once all thiosulfate is utilized excess iodine now forms a complex with starch. This helps us to get accurate end point

  • @niranjini.achemistrydepart300

    @niranjini.achemistrydepart300

    2 жыл бұрын

    @@bhushansongthank you for your reply