Introduction to Two Sided Machining | Vectric V11 Tutorials
Тәжірибелік нұсқаулар және стиль
This tutorial combines a slide show and practical example of two sided machining. We start with a general discussion of the concept and look at options for how you can accurately align a two sided part. We then look at an actual file and work through the basic two-sided process in the software. For PRO users we show how you can utilize the job setup sheet.
Bookmarks:
~ Concept 00:34
~ Flipping the part over: Dowel method 04:25
~ Double Sided Job 10:52
~ Multi Sided View 18:13
To download the files used in this tutorial, view related videos or take advantage of our bookmarking system within the videos please head over to the support section of our website here: www.vectric.com/support/tutor...
#Vectric #CNCsoftware #CNCtutorial #VectricSoftware #CNCsoftwaretutorial #CNC #vcarve #aspire #TwoSidedMachining
#CoolCubes
Subscribe to Vectric on KZread: kzread.info?...
See more Vectric tutorial videos and downloadable files: www.vectric.com/support/tutor...
Vectric on Facebook: / vectric
Vectric on Instagram: / vectricltd
Vectric on Twitter: / vectric
Пікірлер: 11
Well done. I was waiting to see the completed box put together at the end.
@vectric
Жыл бұрын
Thank you for the feedback!
I didn’t think the second method made sense until I went all the way through it. Wow. I think I’m about ready to try my hand at double sided carves now.
@vectric
2 жыл бұрын
Thanks, glad it helped!
The asymmetrical dowel method allowing the machine to be rehomed between sides is very clever! Thanks for the great tutorials!
@vectric
Жыл бұрын
Thank you tmuka!
@tonyrichmond9428
8 ай бұрын
@@LeanOnYourDreams rezero wherever you want. Make your holes in the spoilboard, mount the piece, run the second side.
Cant find the example file, I have Vcarve pro and a trial version of aspire. They are not in the Tutorial file folder. Has anyone any ideas.
Is there any way to copy tool paths to the other side as well?
@vectric
5 ай бұрын
Hello and thanks for the question. Unfortunatly not at this time. It has been a feature that customer would like to see... so you never know what the future might hold... :)
@slimsmithdoesthis
2 ай бұрын
Save the selected toolpath as a template, then load the template on the other side machining