E-Roy The Salvage 😂

@benstanton2122

Жыл бұрын

Yes!!!!!

@concreteandcadillac

Жыл бұрын

Elroy

@nightcrawlerc9842

Жыл бұрын

Ayee!!

@trstonyv.3159

Жыл бұрын

I was gonna say Voltron but E-Roy winss

@johnathantaylor2059

Жыл бұрын

Waitttttttttttt did you call it E-Roy because it looks like the electric Leroy from Cleetus????????

I personally appreciate that you didn't stretch this process out into 3 or 4 different videos. That's what it's about man. Hell of a build fellas.

@stoneheart9679

Жыл бұрын

You mean uncle rich with 106episode build 😅

@EndriuGolara247

Жыл бұрын

They laearned from intercooler video series, it was like 3 or 4 episodes of welding one intercooler for MR2

@Dabagel100

Жыл бұрын

@@EndriuGolara247 lol that made me turn off notifs for like a month LOL

@SirGrogg

Жыл бұрын

But, it’s not even a build. It’s a rip apart and weld a few things on and it looks like crap. Not even close to what these guys are capable of.

@Coyote.five.0

Ай бұрын

yes it is almost like they knew people wouldn't want to see a 10 part video of a tesla getting rebuilt but as soon as you add boo*s and american v8 and freedom people start watching am i right ????????

thanks for doing this in only one video. Most of youtubers now a days would do minimum 10 episodes of 50 min each to do this insane project. hope it works out as good as it looks!

@megapet777

Жыл бұрын

this

@NAUT758

Жыл бұрын

What's wrong with that?

@klev2008

Жыл бұрын

I don’t mind the Long episodes depending on how it’s done. Some creators do a great job of making a 30-45 maybe 50 minute video feel short.

@NAUT758

Жыл бұрын

@klev2008 yeah that's what I was saying. Cause although some of them do multiple series usually there is a compilation at the end. Like the "xyz build in 10 minutes"

@ryleylong

Жыл бұрын

agree, this is the way to do it

Thank you for just putting the whole project in one video, it's really cool seeing everything together!

Looked a bit silly after being gutted but the cage tied it all together for a sick look. Don't care if it ain't got gas in it. This thing is awesome! The cage building montage was super well shot too.

@roinealenius

Жыл бұрын

Looks a bit like a Honda CRX with the Cage :)

@awolfeld

Жыл бұрын

All American muscle of the future

@trumantydlacka7344

Жыл бұрын

Well said

@fast97z24

Жыл бұрын

​@@awolfeld😂😂😂😂😂😂

Put another bar under the wing and use the bar stock to put the tail lights kind of where they should be! I think that would help tie it together even more, I’ve always been a Tesla hater but I’m so excited to see where this build goes and what you and fueltech might be working on

@gridlock9655

Жыл бұрын

@@xahst Afraid of change. to put it simply, things that don't fit their fragile mold are 'bad' and must be hated. When in reality, there's zero reason to hate the cars.

@user2C47

Жыл бұрын

They could also be mounted near the top of the wheel well.

Thank you for editing days of footage into a 26min long video! I thought we’d see half the progress than a week later see an update.. you guys spent time and energy in the quality of this video and content.. Great content guys!

Awesome! That's the best, open-a-toy-to-see-what's-inside, I ever seen/done 👏

This build is really cool, some sheet metal panels (at leas in the front end) would be quite sick and probably help it run a little faster by bringing back the aerodynamics electric cars rely so heavily on.

@DrewCNewOrleans

Жыл бұрын

It definitely needs some sheet metal aero panels. You can clear seal them so it keeps the cybertruck feel to it

@perfecte99

Жыл бұрын

Damn u said it even before me!

@StingrayOfficial

Жыл бұрын

Every 200MPH car relies on aero to be fast, electric or not lol, and no I am not a Tesla fanboy.

@brysoncorley

Жыл бұрын

Maybe even canvas would look pretty sweet.

@Pumpkin-Brain

Жыл бұрын

All great ideas but carbon fiber panels would keep it real light.

Anyone that calls themselves a car guy has to appreciate this! This is freaking awesome! Can’t wait to see how this project gets improved over time.

@stuwest3653

Жыл бұрын

No, stripping a tesla is just dumb.

@ZedKay86

Жыл бұрын

​@stuwest3653 I think it made it way better. Looked like grandmas car before. 😂

@niveded

Жыл бұрын

Well when you have a lot of money and nothing but time you can make cool projects to make even more money off of it.

@WezleyB

Жыл бұрын

​@@stuwest3653you obviously don't understand how Motorsports came to exist.... People have stripped much more expensive cars to go fast.... This kind of shit is going to be great for the Ev community... They're already faster stock, then almost any gas car, they are going to dominate the racetrack in the next couple of years.....

@unittwophoto

Жыл бұрын

@@stuwest3653 shut up

I think this type of stuff is super cool and fun to watch, it's what KZread is all about; getting to watch things you would otherwise never see and answering those what if questions.

Do what you do man this is so exciting to watch you come this far with this thing let’s do it

Not gonna lie this is one of my favourite current builds across all the main KZreadrs atm. Super unique and it’s going to be FAST!!

@DaftFader

Жыл бұрын

This is almost as wild as the DDE TT F12, and it's still technically just a stripped down stock car with a cage! 😁😅

@feelinghealingfrequences7179

Жыл бұрын

ok tesla fan boy u got tesla or electric car your self?

@REALshqipeAK47

Жыл бұрын

@@feelinghealingfrequences7179why tf you hating bruv me myself don’t like teslas but if i would get one i would enjoy it idc that it is electric they made a electric camaro no one said nun

@DaftFader

Жыл бұрын

@@REALshqipeAK47 Ignore them, they clearly aren't even old enough to drive yet. 😉

@newtonfirefly3584

Жыл бұрын

@@DaftFader ​ @KUSH4_EDITZ ​ @feelinghealingfrequences7179 @pincon1811; All'Y'All are clearly ignorant Fools, "Fan Boys", within each individual False Realm, individual world of Nonsense = LIES !! Seemingly Are Y'All just as much "Fan Boys" with "Leroy The Savage"-"Leroy 2.0" along with Garrett's Nonsense denial, refusal too !! => which is proven over and over again, every stage, attempt -> Good Luck

Not even 5 minutes in yet and I’m already pumped to see where this goes!!!!! Sick idea!!!!!

Awesome build! Want to see some performance mods to the electronics in the future.

I called it! I knew this was coming and have been waiting a long time for this video. Ever since you showed the co-part video!!

Mate I’m more than happy to watch you boys build a crazy fast electric car. It’s something new so it’s interesting watching the precess of how you guys get it done 👍

@feelinghealingfrequences7179

Жыл бұрын

how fast is crazy fast? 8.9 1/4 ? if it doesnt go 200mph 1/2 mile?

@zanderdiedricks1895

Жыл бұрын

@@feelinghealingfrequences7179 I mean 0-100 and 1/4 mile is crazy fast for a stock production car. Obviously it’s ain’t no k swapped mr2 or or nsx but the concept of this build is cool in itself

@Studio23Media

Жыл бұрын

@@feelinghealingfrequences7179It's a stock production car...

This thing is sick Kyle. Couple suggestions I'd like to see, tuck/cover as much of the wiring as possible. And paint all the exposed areas black to blend in

@ShannonSouthAfrica

Жыл бұрын

Agreed.

@slicedlimes7948

Жыл бұрын

I’d like to see as much exposed wiring as possible, and a build focused on speed rather than form. This isn’t a lambo rebuild

@elevatedinnature

Жыл бұрын

@@slicedlimes7948 lambo’s don’t need aerodynamics like an electric car!!!

@renemorales6099

Жыл бұрын

Good afternoon. I started watching this since day one. And excited to see the finished product.

@elevatedinnature

Жыл бұрын

@xahst due to the lack of ability to tune a Tesla, you can’t really add more power up top for more speed, so aerodynamics come in to play way more in that aspect as well as weight for the power to weight ratio, not much else they could do to drop the weight of a Tesla

This thing is sick you’ve earned a new sub for sure!!

we need to see it on the track now, great video, excellent timing on the video and the job

With so many builds on YT, this one is amazingly unique! Looking forward to this build!

@lilldebby2592

Жыл бұрын

As if it’s not completely inspired by Leroy the savage on cleetusmcfarlands channel

@Grey86

Жыл бұрын

​@@lilldebby2592tell me about it. We've gone from one Leroy to 3 in a week. Shits gonna be a production car soon enough..

@brandonfennell9983

Жыл бұрын

@@lilldebby2592 It’s great that Ole Cleet is on board with an inspired build from his incredible OG build! Outside an homage to Leroy, this one is still completely unique and very different build.

@gregkrueger331

Жыл бұрын

B is for build has been doing a tesla strip out just like this a couple weeks ago. Only difference is B is for build is dropping a mercielago body on it instead of being a cart.

@shalakabooyaka1480

Жыл бұрын

@@Grey86 cant leave out Z-Roy, Adams burnout car lol

Yoooooo this definitely just became the sickest build on YT right now👌 This is top tier BoostedBoiz right here, reminds me of all the other wild ass projects like the shopping go-cart, Hondaru, Suzie, etc. You guys really do have some of the best ideas for builds

Love it, the world needs more of this insanity!!! Would be good to see what wiring can be removed and how much dash can be removed. Front struts also looked like they need support

Loved watching you guys build this thing 😂 and you guys looking all grown up these days ah. Suits you guys! I'm onto the next vid haha

Thanks to Cleetus for the "additional parts" and the ski mask skit had me chuckling... move the charger port to inside the car Kyle, for safety sake really and for aesthetics too!! AWESOME WORK GUYS

@pyro530916

Жыл бұрын

Unfortunately, I believe the charge port leads are bar stock, not cables. So might be a bit of a pain to move it.

@ricochetgaming7858

Жыл бұрын

@@pyro530916 yeah theyre pretty solid by the looks so trying to modify them would be near impossible and a fire hazard

Projects like this get me excited about the future of EV hotrodding. In the early days of hotrodding they had "rail cars" which were just stock cars with big motors that they cut all the weight off of, here we are 100 years later doing the same thing to EVs and it's still rad imo!

@senrusho

Жыл бұрын

Yeah, I imagine one day we will be building cars with custom built electric motors (or even e axles) and hot swappable batteries that have exactly enough juice to get the car 1/4 mile down a track as fast as possible

@TonyS26

Жыл бұрын

​@@senrushoonce solid state batteries are ready for primetime, you're probably not far off. They will be able to dump and receive a ton of energy so quickly.

@bearrett50kal17

Жыл бұрын

​@@senrushothis exactly, plus the main problem with EVs is the energy density of batteries, it's gonna get crazy when the energy density of batteries starts getting near the energy density of high octane gasoline and performance fuels. Also accessibility to performance motors, aftermarket support for performance EVs, motorsport computers for performance EVs, the market for this is still in it's infancy.

@garystat

Жыл бұрын

Who is Mod’ing electronics for this car? That would be a cool partnership.

Pretty cool project. I would at least paint the cage and exposed battery rails. A carbon "fibre" exo body or areo bits would be neat to see get build and added. I do recall seeing LSD upgrades for these and maybe some custom battery cooling and voltage mods. EV is the inevitable future so might as learn all we can about them now 😋

@Bathykolpian

Жыл бұрын

@iantrofimov641610 million EV’s were sold last year, and 14 million are expected this year. May not be your cup of tea, but they’re doing something right.

The neighbors must love you guys! Sweet video.

Kudos to you guys for stepping out of your comfort zone and doing something unique and still cool!!

NICEEEE! Personally I would loop the rear with a cage too and tie in the back of the strut towers. Remember you have an almost 4000lbs car pushing now to this strut towers and you only braced them on one side where as before, even though it was sheet metal, it was braced all around. So I would do a rear bash bar where you can mount the lights to and also screw onto the front cage and then also mount the rear strut towers to the bash bar which can use the stock mounts at the rear which you shortened but would be now perfect to mount the bash bar. This way all hard mount points of the Tesla are again together making this rigid as hell. You can also mount the charg port then at the back on the vertical riser bars from front cage to bash bar. I hope you understand what I mean :-)

The cage should have three times as many tubes and a thicker construction for this to be considered mildly safe.

Crossmember in the rear cage at least, ideally a much beefier cage - you're running insane numbers, safety is the key! Incredible build!

Perfect race week car. I'm sure you can dial in a constant time with this setup. 👍

@jdshanahan4215

Жыл бұрын

He could just tow a diesel generator like uncle Chet did a few years ago. 😂😂

@tacojay5617

Жыл бұрын

They'll have to figure out how to protect their electronics from rain before a race week is possible

@MrArcticPOWER

Жыл бұрын

I bet that range will be under 150 miles so not so perfect when you spend most of the day driving.

@Ontheregz

Жыл бұрын

This would be an incredibly inefficient race week vehicle 😂

You guys keep doing what you're doing. no matter what anybody else says , Sick content . This build is gonna be AWESOME . And you gotta do a drag & drive! but definitely different wheels and tires , can't wait to see the next video of E-ROY

@gavinmeyer8937

Жыл бұрын

would be hilarious if instead of a trailer they tow a generator to charge it

@billywilliams7987

Жыл бұрын

I like your idea charging it as they go from track to track

@Hard_Right

Жыл бұрын

i'm sure everyone complaining has their own million subscriber channels so their opinion is worth listening to... oh wait that's not true at all

Looks like an interesting build so far... So keep on going 😊

This is amazing, guys. Keep going with it!

This is absolutely amazing. I can’t wait to see this on Cleets spectator drags🔥

Spectator drags at the freedom factory are a must for this unit! Couple cans of spray paint will go along way for this unit too

@Qualitymobilevideo

Жыл бұрын

It's game over on spectator drags with this unit. They need to take it to their paint guy and have the cage and wells properly painted, no half-assery on this one!

Love the variety! Keep it up!

Like you said not planning on rolling it but I’d add 3 X braces. Top above you your head, down through the main hoop to the floor and upper hoop corners down to opposite rear towers.

@andli461

Жыл бұрын

Bottom of main hoop to rear towers or maybe continue the door struts further back to the rear towers. Something is definitely needed in that region.

Hell yeah That is awesome. I can tell Kyle still cares about quality and keeps upgrading and that is what I like the most because he stays interesting. Been a fan since the integra build when he put a Cylinder head in a duffle bag on the plane to get it to Cleetus. Lol

You boiz do some sick fab work!! Crazy how far you have come and the quality is second to none 👍👍

I’ve been waiting for something like this. Awesome project!

I’ve watched every single episode. This has to be one of the craziest ones yet. So wild.

I love it, you should definitely build a more aerodynamic front end for it though

@et7409

Жыл бұрын

Yeah it needs a bash bar and some basic aero so it is not a flying brick.

@ForrestOutman

Жыл бұрын

Absolutely, drag is the biggest force you're fighting with power. It's a complete waste if you are light but not aerodynamic

This is fantastic! As a Plaid owner and aero engineer I was always wondered how a Plaid would perform if you stripped it down as much as possible for pure performance. As you mentioned earlier, lighter wheels would improve performance. If you don't want to spend a fortune, the stock 19" wheels/tires are lighter (I believe 6 lbs per wheel/tire) with a lower moment of inertia than the 21" wheels/tires. Looking forward to seeing how that bad boy performs!

@johndc2998

Жыл бұрын

There are quite a few videos here on KZread of full stripped down Plaids, more so than this.

@B00024406

Жыл бұрын

Plaid battery is 1200 Lbs. you only need 25% of that to go to the strip, way to go to reduce weight, and a nice colab doing so with Rich Rebuilds.

I am 7 minutes in and I JUST NOW got the Leroy - E-Roy joke/reference. love it. looks SICK

Now I need to subscribe because of that one so I can get a notification for the next vid! lol It looks sick!

Keep it up Kyle. Love the content. We can tell we hen you enjoy your projects and I can say I appreciate learning new platforms

Kyle, you have a first mover advantage with this project. Whilst the eRoy related to Leroy is fun , I think you should consider leveraging your own BB brand to reflect a unique offering. It is a step on a future path and no doubt will generate huge interest at the drag strip

@replynotificationsdisabled

Жыл бұрын

Way to leave the guessing game open. You started strong, then left out your whole purpose. Yay

@samthesr20man

Жыл бұрын

Nah dog that ain't it.

@ryanward4728

Жыл бұрын

E-Roi....ahem...

E-Roy, well played. Looks like it could be reaaal nice! 👍🏼

So cool! Probably the coolest thing around rn!

Cool project guys but having built an NSX with a roll cage I wanted to suggest some 3M bonding agent that's made specifically for bonding different metals. Use that under the steel plates for your cage footplates as the steel plates against the aluminium will over time start to react with each other and the bonding agent helps with strength but mainly with the chemical reaction between different metals. Might be too late now, but just in case it's not thought I'd say. Looking forward to see how you get on...... loving it.

@fabriglas

Жыл бұрын

As rail engineer who's built aluminium body on steel backbone wagons I agree with the comment 100%

@69Deez_Nutz69

Жыл бұрын

Right, Galvanic corrosion and the horrible effects it has on its longevity

@rrs_13

Жыл бұрын

@@fabriglas wouldn't brazing aluminium to steel be as good if not better? In structural terms, that is. AFAIK, it's hard to have oxidation eduction if the metals aren't in direct contact with each other. I'm just asking this because I'm almost positively sure I remember old school bicycle racing to make use of stuff like this.

Dude this thing with all 4 drag slicks on a prepped track will be insane. Definitely should try and get this done in time to race Elroy on the drag strip before it’s gone!

@connorgreen1913

Жыл бұрын

Before which strip is gone ?

@one4x4nut

Жыл бұрын

@@connorgreen1913 he was talking about Elroy if someone picks it

@niteriderevo9179

Жыл бұрын

@krackem83 c5 corvette, stripped down and rebuilt to match early leroy, also a c5, it was stripped down and effectively rebuilt into a sort of all-rounder kart, later a full drag-kart

Hell yeah man! Stay true to what makes you happy! Loved to hear you say it!

As soon as u pulled tha thing out of the garage I new it was goin to be awesome

Really good video. I loved the amount of progress, explanation and actual work you showed being done in this one.

Good for you Kyle. You do you because this is a sick ass project! I like that you didn’t let others influence your decision to move forward with E-Roy content. So dope bro!

It's good to see content creators meddling with the future, no matter how painful it can be to accept. Even if they go nowhere, it looks like a fun toy.

Full send on a full front piece carbon fiber hood and splitter combo. Wicked series!

Don't forget to caint the page😅 some satin black steel it would look so good on it and all the unpainted body and stuff but this is some really good work, you guys absolutely killed the chrome molly cage 👌👌👌

This is the sickest build right now. Definitely need more bars to fill in all those big gaps. Also, the sticker on the front bumper should be E-lontech 😂

After you said cut the b pillar I was like.... Oh boy then I saw that tubing🤣

LUV IT ! Next up... aftermarket inverter control to up the motor power.

I was bummed that you seemingly chopped a perfectly functional plaid. But the result after the cage was installed looks SICK. Cant wait to see a E-roy vs Leroy.

@Ontheregz

Жыл бұрын

It’s just a Tesla wgaf 🤷🏻‍♂️😂

@MrWIbackpacker

Жыл бұрын

E Roy will be more than a second slower than Leroy.

@martellparks1450

Жыл бұрын

@@Ontheregz one you cant afford

@fast97z24

Жыл бұрын

I'm sure everyone sat around and thought about it awhile before it was decided lol. But in the end, I'm sure the determining conversation sounded something like... "yea plaids are cool and you don't see a ton of them, but if you do this, it'll be a 1 of 1 and it's already wrecked so don't feel guilty" lol

@MrJermbob

Жыл бұрын

@@MrWIbackpacker cant even turn a plaid up :(

I have been wondering what you were gonna do with this thing because you said the plans were crazy and I gotta say this is way better than what I thought you were gonna do was swapping in case series or an LS like Ice t, this is a much cooler idea and definitely the worlds 1st great job fellas

@von...

Жыл бұрын

dude I was so ready to be a hater if they swapped a k series into it haha I am soooo glad we were wrong, this is beyond sick

When you were cutting around the gas door WITH THE METABO I was SHITTTTTTING MY PANTS!

Thanks for the great content.

Not sure *how* Kyle is going to miss 3rd gear in this, I'm just sure that he will find a way.

@Ontheregz

Жыл бұрын

Can’t miss a gear when there literally are none

@jerimybutler897

Жыл бұрын

​@@Ontheregzyou just had to be right smfh.......

@sleddarcheddar

Жыл бұрын

​@@Ontheregzright over your head.

@Avetho

Жыл бұрын

@OnTheReg22 Well, there is one, the gear reduction box on the motor. Thankfully it can't shift so there's nothing to miss! 😆

So crazy, I can’t wait to see what it runs, hopefully billet specialties hooks it up with the wheels for that thing and some radios on the back. At first, I thought razzle dazzle was going to get the power train lol.

Def keep building it. It’d look sick with everything cleaned up with a drop and a set of wheels. it’d be dope.

Bellissima!! ottimo lavoro ragazzi! avete fatto una cosa dannatamente veloce!!!😱😱😱vai così!!!!💪💪💪

Sick build guys!! As always, running the extra mile on builds!!

@derekgardin1512

Жыл бұрын

Copying cleetus.

@Ithiel1981

Жыл бұрын

@@derekgardin1512 not necessarily copying him, these guys have a special vision on cars. I hope it stays on electrics ( with a little twin turbo K- SWAP later on, if really necessary, which I don't think so). Pair of guys with excellent build skills!

FINALLY something James can drive without having to worry

@chasejones10111

Жыл бұрын

stop the cap.

AmplifiedCurrentBoiz 😂 This build looks interesting! 🤘

Bro... 'E-Roy the Salvage' is the best run-on name yall could have come up with. Absolutely PERFECT! 🤣🤣🤣 We're gonna need a Leroy the Savage vs ERoy the Salvage race ASAP!!! 💯💯💯

I would personally ditch the rear strut towers and combine now ones into the cage like leroy, so much cleaner looking

Im curious to see what you guys do for water proofing. Would be cool to have some sort of removable cover on the small rectangle roof right about the seats. I love it. Cleetus will too haha

@rexxx927

Жыл бұрын

a giant vac bag zip loc freezer bag or Tupperware containers lol

Absolutely love this build boiz this is siiiick 🔥🔥🔥

Cage looks amazing. Love the name!

You guys always have Solid content and work really hard for it... But E-Roy the Cyber Cart... Legendary status. This is a game changer!

So much gold in this video, thanks for uploading! The hips on the back of the car almost give it a 370Z vibe. I also lol'ed at the guy making an e-Roy calling Chet a little crazy. Let's goooo!

I think you guys should build out the exo-cage more. Do the rear so you can hang the tail lights in the correct position and I think continue the cage from the front doors to the front bumper. Maybe see what it would look like with the hood back on it, just to clean it up a bit.

Awesome! Just add two more bars between the wing and the rear members.

You guys are smashing it , great content as always keep it up 😊

This is so sick! That's all I have to say. Thanks for all the videos, this brings me so much joy! You guys are awesome! Keep it up!

@AdamsYouTube123

Жыл бұрын

E-Roy The Salvage...holy shit, perfect name too! You guys are amazing! My favorite channel for years now! Love you guys!

The fueltech bumper sticker is the cherry on top. I love this

Wow. Came here from Andrew's plaid channel. Good stuff

Love the cage work!!!!!!!! Keep it up!!! E-Roy is sick!!

major props for such progress in just one video!

You should cup the last cross bar in between the shock towers, and make the back into a truckbed it would be handy

Fiberglass-wedge body for aero would be sweet, really get the RC-vibes up!

Just as a safety measure, I would change out the steering wheel to a regular round wheel in case she happens to get out of control. Other than that, I am enjoying this build. Keep up the fire content.

@S14lopez1

Жыл бұрын

No need. The steering is super responsive close ratio

@carholic-sz3qv

Жыл бұрын

@@S14lopez1he absolutely needs a round steering wheel in case something happens! This is a modified car lol!!!

@Emilthehun

Жыл бұрын

​@@carholic-sz3qvstill has all the tesla safety in it. No need for a different wheel.

@carholic-sz3qv

Жыл бұрын

@@Emilthehun wow!!!! You're soooo smart aren't you!!? The car doesn't have the while factory protection anymore and let alone if something happens with the car it's the drivers fault and finally a round steering wheel won't hurt you in a crash because it can actually absorb the shock.

@Emilthehun

Жыл бұрын

@@carholic-sz3qv wow no need to be sensitive 😂. I meant all the electronic Nannies that stop people from crashing most of the time. And a round wheel will do you no favors in a crash because the airbag is what catches you (hopefully) , and not the wheel.

A Fast car is a fast car man! love the content and that you're enjoying what you're doing man! keep it up!

Nice build team. Embracing the future of fast.

That pretty baller right there nice machine y'all have took and "freed" from its weight restraints! E-FREDOM Totally should be the license plate hahha Cletus would croak if he saw it with those plates looking like that pulling up 😮🎉

The fuel tech sticker is like the chefs kiss... 👏👏👏

So pumped about this build!

I immediately thought this was what the build was going to be when you first brought the plaid on. But then you rebuilt it and i thought to myself, theres no way they would chop it now right.... right!? It looks sickkkkk now. Cant wait to see where it goes.

ohhh yeahh! i Hope this content goes hard, im pretty excited to watch this progress, very interested to see how you combat the traction control style issues with the further reduced weight

@lemongavine

Жыл бұрын

Drag radials?