Intro & Overview of the Make Noise Rene2 Eurorack Sequencer Module
Музыка
Introduction and Overview of the Make Noise Rene 2 Cartesian Sequencer.
For more info on the Rene visit our site here: www.ctrl-mod.com/collections/...
Sonic Scenarios is a series of videos chronicling the features, designs and sounds of Eurorack format synthesizer modules with sound designer Mike Kiraly - Presented by Control.
Video by Sonic Scenarios for Control:
www.sonic-scenarios.com
Control is a synthesizer brick/mortar and online shop located in the South Williamsburg Neighborhood of Brooklyn, NY specializing in Eurorack Modular, vintage traditional and unusual eccentric electronic devices both analog and digital. Please do not hesitate to get in touch.
www.ctrl-mod.com
info@ctrl-mod.com
Пікірлер: 46
Sorry everyone, we had some Technical issues with Part.2 and can no longer release it :(
@cooloutcoexist
4 жыл бұрын
That's unfortunate, still thanks for this one, helped a lot. Btw. I'd even watch a technically flawed pt. 2 of this :-D
@nodfactor8808
4 жыл бұрын
Redo! =]
@MarkoDeLaVoota
4 жыл бұрын
right.....
@GuitarsAndSynths
3 жыл бұрын
bummer hope you do make some more videos
@willhurt3446
3 жыл бұрын
So....just re do it. 🤷🏿♂️
Yea... was looking forward to part 2, since this (part 1) was very concise and informative! Great stuff... so please make part 2 :)
This is great! Just got me mitts on one :) thanks for the intro :)
Another clear and informative video, thanks again!
@sonic_scenarios
5 жыл бұрын
You're welcome!
Waiting for part 2!
Great video! Any plans for a part 2 on this? Would love to see it!
ah shit, yours videos are the best I hav seen on the internet ;)
Great intro to new Rene thanks! Don’t want to sound like a stuck record - but any chance we could see part 2 soon?
When will part 2 be out?
Cool!
Looks fun! I have a Make Noise 0-ctrl and 0-coast that are like a mini Rene/Pressure points Shared System. Now I want a full v2 shared system with rene v2.
@jasper374
3 жыл бұрын
I WANT EVERYTHING!
Great informative and very clear video .. thank you.. but it is unfortunate that we won't be seeing the next one.. Any chance ? second one.. please?
Alien. I love it
@sonic_scenarios
5 жыл бұрын
:)
Thanks for this clear and very thorough walkthrough and detailed explanation of this powerfully deep sequencer. I need to watch it a few times to really grasp everything and obviously need to get my hands on one to really begin to understand it, but I definitely feel more comfortable now approaching it. I’m fairly new to Modular, one very basic question though, not really related to René though, which eludes me. When you have a sequencer like this and send v/Oct to an oscillator, then send gates out to an envelope, what module or type of module is good for envelopes for this sort of sequencer. I mean I guess I have a hard time figuring out what I need for that. My basic understanding is the envelope shapes the attack and decay of a sound. But with a sequencer it seems you’d need several so each voice could have its own dedicated envelope. Or is this limited to essentially triggering only two different simultaneous voices (one for X one for Y)? Sorry if this question seems ignorant 😅
PART 2! PART 2! PART 2!........
hello, thanks - where is y channel gate output going?
You mentioned "increasing the complexity of your clock input". That was my favorite part. What module did you use to do that?
Can you change the gate length of the notes, or are they all the same? Could I for instance have quarter notes and then have a longer, half note in my sequence?
What I dont understsnd is that in a quantize mode you select the notes with touch buttons on the right for the melody. Scales and stuff. Ok. But why not with the 16 potmeters on the left? It does the same. Then what is different? Thx
Which oscillator is being used here? Sounds fantastic!
Good stuff having a hard time finding part 2 ..😖
Great video! I can’t seem to figure out how to make certain steps muted on my sequencing( and i mean muted not skipped). Anybody know?
@kaaraosa
5 жыл бұрын
By disabling steps from the gate section, am i right ? Like he does in the video
@reverseetc
5 жыл бұрын
@@kaaraosa That disables the gates but isn't true mute (which i don't think exists). If the note is still resonating, you'll hear it change. My workaround on this is to change muted notes to the same CV as the previous gated note.
@Hornbes
5 жыл бұрын
You can disable the step in the access menu and then set the access function to sleep. This will cause Rene to “sleep” on the step before the skipper step. Sleep is a global setting so all other steps with access disabled will also sleep. You can not mix sleeping and skipping.
What envelope generator and VCA are you tapping into? 3:39
@philtobin9510
5 жыл бұрын
More than likely to be MN Maths and the MN LPG.
Also, forgive my ignorance on the subject, but along with Rene, what are the other bare minimum modules I would need to make a stand alone polyrhythm machine, similar to say a Moog Subharmonicon? I’m thinking a VCO, VCA, VCF, and an EG? If I wanted to fit such a machine in 104hp what would you suggest?
So why do we need c mode? Seems it goes randomly up and down... Tell me the case where I can use c mode.
@snoom_leo
5 жыл бұрын
@suanshine it isn't random. it determines the sequence based on the location of both the x and y signals which are operating on separate clocks. at least that is how i understood it. hope this helps
You guys just got some Rene 2 back in stock. Now would be a good time to finish the series? :)
Pour moi ça serait bien de voir où sont branchés les câbles; car je ne sus pas anglophone.
@fredericvanwalleghem
4 жыл бұрын
Moi non plus mais il faut apprendre des langues. So important to know minimum 2 language next to your native tongue.
Anyone else feel like this could easily be Interdimensional Cable?
Too bad it's unavailable. I've been waiting since last year.
@fintronics
3 жыл бұрын
I mean the Rene MK2
I love how you explain it like to an idiot 👍