Thank you for being the only one on KZread to actually show how to convert a 1 1/4 to 1 1/2! Made my job and life so much easier!

It's a WELL DONE JOB for me!!! I was a little bit scared to cut the pool but I thought that putting adaptor + adaptor again was already giving me headache...so I finally jump aboard!!! THANKS FOR YOUR VIDEO!!!

I was very apprehensive about taking a knife to my new pool, but this video gave me the courage to perform the operation. Thanks Morton Work!

Thanks! I've seen others cut but you give me the confidence to do it!

This is exactly what I'm looking for. Thank you. This video just gave me confidence in doing this upgrade

This is a life saver - I bought the Inlet Air Water Jet filter and saw all these new valves and I was flummoxed and thought there I needed a different pool - but this will sort it thanks

I had an intex pool before had upgraded all my pieces. I have a summer waves this year & it has the small pieces I've been going crazy on trying to be able to add my intex pieces like my roomba vacuum. I've been hoping I could just cut liner to switch back to old so thank you so much for this video

So after waiting 3 weeks, I finally got all my parts in. Against my wife's wishes, I cut a big square hole and cut both inlet and outlet holes out larger. No I have a salt water sand filter using all 1.5" intex parts. And a skimmer No problems. Just took a few hours all together to set up. Thanks for the very informative video.

This is the best video I've seen on doing this upgrade! No long stories or explanations, just showing how to do it. Thank you, I'm doing this tomorrow.

@tscottwood

2 жыл бұрын

Hi Daniel. Where did you find the complete set like he's using??? I can find the return set with a different inlet valve. I need the one like he has in the video.

@cassieelizondo9086

2 жыл бұрын

YES THANK YOU for just showing us how to!

Just got my parts in today. Wanted to make sure I do it right. Thank you so much for this simple tutorial!

@tscottwood

2 жыл бұрын

Hi Aly. Where did you find the complete set like he's using??? I can find the return, but with a different inlet valve. I need the one like he has in the video.

This is great! I am so terrified to cut into my liner 😂

Thanks so much for this video, I got earlier this year a Coleman power steel 16x10 pool. Just got a Intex snad and salt water filter system. And of course they do not work together. Been looking into adaptors and all, but wanted to use all Intex inlets and outlets. I will give a update in a few weeks when my parts come in.

At last a perfect video on showing you what to do nice one

Thanks for the video. I was going to skip on this, then saw your video and now I'm going for it.

Thanks for the Video Bruh, Nice Slow and to the Point... I tend to over think things, but your Video answers all Questions that I may have.. Thanks...

Wish I'd seen this before I performed the same mod on my own pool, would have saved me a lot of anxiety. But it worked great!

Thank You!!! I, like many, was so afraid to cut my pool! It worked perfectly... It was easy once I started 😊👍

@SatansBaby1

2 жыл бұрын

Is it still good?

@ob_15

Жыл бұрын

🤔

Great, informative video, super helpful and confidence inspiring...brilliant!

super helpful video!

Awesome video thank you, gonna cut ours in the morning for the pump upgrade.

Content is everything. Don’t need people taking so much as good lighting and camera angle.

Did it and it worked perfectly. Thanks soooo much

Awesome vid. Bout to give it a shot. Did anyone else jump as he starts to cut the pool and the music starts. Damn near dropped my phone. Lol

@MortenWork

2 жыл бұрын

Donnielle I set the pace a bit up not to show how much I shook my hands when I cut a hole in the liner 😂🤣😉

شكراً الف شكر مجهودك و اهتمامك و ابداعك 🌹🌹🌹

intex got me buying extras parts to make it work with a 3000gph pump and still I need those parts you showed. thanks

Great video!

Awesome thank u

I just drained my pool to do this….wish me luck 🤞🏾

Thank you so much for this

@svorwerk

2 жыл бұрын

Quick update for anyone else doing this, after watching this video and despite my initial hesitation to cut into the liner, this worked like a charm. I used the same utility knife seen in the video, got it from Home Depot, slices through like butter so definitely go SLOW! My valve stem piece has a vacuum tube coming out the top, just make sure to unscrew that first if yours does as well. Then tighten the nut on the outside as much as you can, let it sit for a few in the sun and maybe run some water over it, then you'll be and to get another quarter to half turn. Had a small dripping leak at first but that last quarter or so turn of the nut resolved it completely. Thanks again!

Thanks for this man!!!

@GerBargerbos

Жыл бұрын

I blundered, I just accidentally made a cut in the liner beyond the circle, I have to patch that somehow. Be very careful when making the cut folks.

FYI-The provided links are ebay europe. Great video!

@MortenWork

2 жыл бұрын

You can buy the set in several places around the world. Amazon and eBay. Search for Intex number as I write in the comment field

i have to do this, i hope everythings turn right.

I was so careful, but mine leaks like a sieve around the newly cut holes. I’m going to try to patch over the holes completely and try again. Considering buying additional gaskets so I can have one on the inside and one on the outside. If the patches don’t work, I’m guessing the only option will be replacement.

Any suggestions on how to remove the spinning piece that holds the gasket to the outlet valve off? I had to buy a new liner and can't remove this piece to put on new liner.

Quick question...on the return valve it has an eyeball jet....is your just loose with no way to tighten?. I've just got mine and waiting for the pipes to come.

I inherited a 12×24 pool with two outlet ports and only one inlet. In the off-season I'm gonna buy new valve's and get rid of our split system. Gonna send one outlet hose to the existing sand filter and thesecond outlet to a cartridge filter or a second sand filter I may install. I would like to cut a whole second return valve but it being a larger rectangular pool I'm thinking about buying two large patches, using your gasket trace technique to cut holes in matching patches. Then stick both patches on the inside and outside of the pool to brace the pool lining before I cut a hole in the pool. I only wanna take this precaution on ours because it's 8,400 gallons and the existing return port is actually done the same way by the manufacturer intex.

@MortenWork

2 жыл бұрын

Good luck with your project

I have been trying to find this set for months and finally found the kit at Lowes...incase anyone else out there is looking for it.

Hey there can you post a link for exactly what you purchased. Don’t want to get the wrong setup. Appreciate it

@MortenWork

3 ай бұрын

www.ebay.com/itm/144068611330?hash=item218b288d02%3Ag%3AKJUAAOSwL11fTCDI And here www.ebay.com/itm/282535069160?itmprp=cksum%3A282535069160abefbe3739944d18a602db8688500fab%7Cenc%3AAQAJAAABcLSVkHmTL63bebovD9RfpraPWbY9f4anjbziTIaEIOVXg2DWhVLks3Lfqff9vxxfjIh4XEXusIehlT2iEH8%252BCxXNySMxlDIQJ3g86%252Bx3AAIAq9gznqdGSR72ksP41kjzPN1reUbVsJuld0S4i4qXlQfTmkMeIJTCXTM8mLpr7ju2fMvruDu87ZX%252B4bShOvD%252B4kOZLO7M9yX4lkd4UX1LJ4E3%252FL%252BdiH58HsiYMgBax7omp%252Bhq8tnrm%252BNFCBcBLSvwhobJeCls%252FBoPJj8farhbr3CB7lqUrpU6%252Be4mCp6EA0TKmQ2NpYzGqjGyHycLwMGuPLN8E0dTRpbjzpZ5HkJC03Y3aU9ia82KS0RGc5CaTCUI5zbLTwHfJLjH2PlOjY%252B7EH4z5O4xC%252B9spHoOhoN%252B6cSCcVaxRA%252B1ARnBCAWoOt2aLKZiFd6N0KdC2SD4XEVvGewyG99hBdzRxiNYLh4cx%252Bm%252FdzxClxCUp%252Fb27FnXoo8e%7Campid%3APL_CLK%7Cclp%3A4429486&epid=4039047651&itmmeta=01HTHN379B7P2JZ6E6CP88VNS4

Alright alright....love it..but I have questions my guy... You also upgraded your hoses....yes? And how do you hook up a vacume with these fittings? Love it..but I don't want to solve one problem and create more.

I’d recommend putting Vaseline all over the rubber part so it doesn’t crack..

Do you HAVE to use the new Return that came with the bigger pump? Will it make a difference if we just leave the one that the pool came with?

@MortenWork

4 жыл бұрын

The kit is designed for intex sand filter pump.

@justbeth82

Жыл бұрын

You can buy a type B adapter

Did you use the inlet nozzle (valve with air black cap from start of video) as one of the outlet nozzles? I'm thinking about doing the second outlet using the inlet nozzle with the black cap on and wondering if you had any issues with air getting in the line?

@MortenWork

2 жыл бұрын

No I use the black hood on the inlet. The black hood is to be able to supply oxygen to your pool. Examples you see in the video are the exit valve (Where the skimmer is mounted)

Did you have to make a tee from the pool hose to the filter? If so could you do a video on how you did it

@MortenWork

4 жыл бұрын

The kit is designed for intex sand filter pump. Nobody t-pieces inserted

You lost me at “cut holes in your liner”. But you executed it very well. Just not doing it here. 🤣

@MortenWork

3 жыл бұрын

Come on ... you just have to have a safe hand ;)

@CindyL4261

3 жыл бұрын

@@MortenWork Agree! But the look of fear on my husband’s face was hilarious. So I lowered the water level and cut the hole while he was at work. Still hasn’t noticed we now have a new & improved Return! 😂

Did you do a video on the paneling for your pool? Is it attached to your pool or stand alone?

@MortenWork

Ай бұрын

I built the fence around the pool myself. Have some video and pictures from the build. I will make a video at some point and put it up on my channel.

Just did the same but with water in the pool, got the son to hold a plastic bag over the inside with the in pool parts under the plastic. Opened the pumpe. The bag got sucked to the wall of the pool, then cut it. A bit more risky than your method.

@unw0rthy

2 жыл бұрын

I want to try to do it without emptying the pool. Can you elaborate on how you did it?

@Terkelchr

2 жыл бұрын

@@unw0rthy hey there, well i had a huge plastic bag and put it on the inside of the pool, between this plastic bag and the side of the pool i put part that needed to go from the inside and out. then i asked my son to hold this part lightly against the side, so you could see the conture of it then i cut with a stainly knife around the conture. after this my son pressed the inner part through the hole and i screwed the outside part on. we removed the plastic bag, that holds the water back and we were done. REMEMBER TO DO THIS WHERE THERE IS A REINFORCED PATCH MAYBE THE OULD OUTLET/INDLET.

@unw0rthy

2 жыл бұрын

@@Terkelchr Thank you!

How do you vacuum your pool with these new valves? I was trying to see if the front portion unscrews to allow for the adapter for the vacuum

@MortenWork

2 жыл бұрын

kzread.info/dash/bejne/fo5qxo9meZOzkag.html You can see my Video Intex Pool shimmer in the link. When I vacuum my pool, I mount my suction hose on the same adapter that my skimmer uses. It is the blue adapter that you can see approx. 1.25 seconds inside the video. Remove the hose to the skimmer and mount your hose to your bottom vacuum cleaner instead.

Hi, recently did this upgrade to my pool after watching this video. Cheers. Wondered tho if yours slightly leak at the bottom as both mine are and they are both screwed in as tight as possible

@MortenWork

2 жыл бұрын

What pool do you have? Is your pool cloth 100% straight and tight? Did you put the gasket inside? Mine and others are not leaking after upgrading, you are the first to mention it!

@orlandoanariba2836

2 жыл бұрын

Mine was slightly leaking from the bottom. I got a pair of channel locks to tighten the ring and no leaks since. Hope this helps.

@AgeingRaver

2 жыл бұрын

@@MortenWork oops, just seen this as I was looking for this video to remind me how to do it again as I just bought a replacement pool. Both pools are bestway steel pro max btw.

@AgeingRaver

2 жыл бұрын

@@orlandoanariba2836 channel locks?

@rosemossyge305

Жыл бұрын

I am having the same issue this summer. I did this upgrade last summer and did not experience the leak but this time i did. wondering where I went wrong...maybe i put Vaseline on the black ring last year and this year i did not? I only put Vaseline on the threading. it's not a crazy leak but definitely a consistent dribbling from the bottom of the twist ring. I have it tightened as tight as it goes but still dribbling. do you use vaseline?

What is the name of the kit you bought? And will it work on a coleman pool?

@MortenWork

Жыл бұрын

Please see in the description which Intex Part number. Don't know if the parts fit the Coolman pool. The valves fit Intex 38mm hoses.

Did you build the fence around your pool?

@MortenWork

3 жыл бұрын

Yes I have 😀 Do you like it 😃

@ashaypatel6563

3 жыл бұрын

Morten Work yes. I do. Hides the ugly vinyl. How did you do it ? Do you have a video?

@MortenWork

3 жыл бұрын

@@ashaypatel6563 yes I have a video. But I have not uploadet jet. I will do it later 😃

What size hose did you hook to the plunger valve?

@MortenWork

3 жыл бұрын

Intex have to size hose 32 and 38 mm. Here I use 38mm hose.

What is the size of your pool? I'm asking because mines is the smallest and I don't know if I should try this out.

@MortenWork

3 жыл бұрын

My pool size is 457x122 cm :)

All of the Intex Part number 26004 or 26005 I found have an E at the end (26004E and 26005E). They have the same hose connedtion as what I already have and not a threaded connection as in this video. Does anyone know where to get the threaded connections. His came in Intex box so it seems they made them at one time or another?

@MortenWork

Жыл бұрын

Here: www.ebay.de/itm/154914664129?epid=24032779226&hash=item2411a22ec1:g:ObEAAOSwsf1jF5Ep&amdata=enc%3AAQAHAAAA4IgHEbNpvAtIG7QnMK8Za9i3HXKoVnElWx0vIWtrzaIfILekU3RdCzWZKgfpHpMbj9mnaz0i3X6VFgoX1qNtpMNg%2BEsIJ3yNByyw7j58nQ9%2F2%2BLautD%2FoTDdhADoc%2BMUIyze4bYF27mRqthzhj5rmzhB3A1t3%2FlAZUQq5XFfS0rSdakQfakCGNlLE6tSW9YJhyDK5%2Bb3%2BWV6%2BAydi8JUGKHcQQyjP8ShNElYr2VdXjhZg3PIukG8Dvkz4RlEcUGxWa4YmYpDMllgHTGIdgqUNPZxipcmXm%2FHjtXEd2Hhsz2S%7Ctkp%3ABFBMrIniie1g

@OkieBurns

Жыл бұрын

@@MortenWork Thank you, however I'm in America and don't have access to this product. Still looking.

@MortenWork

Жыл бұрын

@@OkieBurns Sometimes we are a little challenged by the fact that KZread is an international channel. Hope you find your parts.

@OkieBurns

Жыл бұрын

@@MortenWork You got that right. I found all but the Intex Grids Part 12198. I have the smaller ones that came with the pool (75 mm) versus the ones that come with the 26004 kit (100 mm). Between U.S. Ebay and Intex I got the individual parts. Could possibly buy from China through AliExpress but they have such low ratings for actually delivering what they sell I didn't risk it. Hope to find the last two parts by next spring. Thanx for all the help. Am using your video when I install it all. For now I can use the smaller grids but will look better with the larger ones so still looking.

Hi can I make the hole with water on the pool? Of course lower that the hole

@MortenWork

3 жыл бұрын

Yes you can. It is actually best to make the hole when there is water in the pool as the liner is tight. Adjust the water level below where the hole is to be made.

Hi, do you do this only for the Suction B holes or also output Hole A?

@MortenWork

3 жыл бұрын

Both 👍

@edwinaguilar8482

3 жыл бұрын

@@MortenWork thank you can you share link?

@Criaderopelagio801-orem-utah

3 жыл бұрын

@@MortenWork Where do you order those?

@MortenWork

3 жыл бұрын

@@Criaderopelagio801-orem-utah on eBay

What was the part number for these 1.5” valve upgrades?

@MortenWork

2 жыл бұрын

See the description for part number. :)

I just searched the Intex site for that kit and am coming up empty. Could you drop the link for it on here please?

@MortenWork

2 жыл бұрын

I have put two links into the description as well. Thanks for the feed. Have fun.

@robertbarnes5783

2 жыл бұрын

@@MortenWork I can see you're getting this question constantly, and unfortunately I've got the same issue as most people. Wondering if they've changed the design of the part. Looks like the 26004 and 26005 parts include outlet fittings with a smooth clamp-on spout, rather than the threaded piece that you secure the nut and the valve to. Definitely looks like a lot of folks would appreciate a hyperlink if possible.

@MortenWork

2 жыл бұрын

@@robertbarnes5783 www.ebay.com/itm/144068611330?hash=item218b288d02:g:KJUAAOSwL11fTCDI

@MortenWork

2 жыл бұрын

www.ebay.com/itm/144068611330?hash=item218b288d02:g:KJUAAOSwL11fTCDI

What is the model number on the box

@MortenWork

Жыл бұрын

Please see part number in the description kan købes via dette link www.ebay.de/itm/154914664129?epid=24032779226&hash=item2411a22ec1:g:ObEAAOSwsf1jF5Ep&amdata=enc%3AAQAHAAAA4IgHEbNpvAtIG7QnMK8Za9i3HXKoVnElWx0vIWtrzaIfILekU3RdCzWZKgfpHpMbj9mnaz0i3X6VFgoX1qNtpMNg%2BEsIJ3yNByyw7j58nQ9%2F2%2BLautD%2FoTDdhADoc%2BMUIyze4bYF27mRqthzhj5rmzhB3A1t3%2FlAZUQq5XFfS0rSdakQfakCGNlLE6tSW9YJhyDK5%2Bb3%2BWV6%2BAydi8JUGKHcQQyjP8ShNElYr2VdXjhZg3PIukG8Dvkz4RlEcUGxWa4YmYpDMllgHTGIdgqUNPZxipcmXm%2FHjtXEd2Hhsz2S%7Ctkp%3ABFBMrIniie1g

What if you need to hook a skinner up on one of them??

@MortenWork

2 жыл бұрын

No problem if you use Intex original skimmer. Watch my video here how to do it. kzread.info/dash/bejne/fo5qxo9meZOzkag.html

What if you want to install this in a spot where there is no reinforcement? Will that be fine or will it tear? I was thinking about applying a patch either side, an making my hole there

@MortenWork

Жыл бұрын

It must be your own responsibility.

@olestampevestergaard4746

Жыл бұрын

@@MortenWork i will add a patch on either side, and I hope you would have said so if you think it would tear open without doing anything

Are the incoming valve suppose to be 32mm and the out valve 38mm or am I reading it wrong

@MortenWork

2 жыл бұрын

The film shows how to upgrade from 32 mm to 38 mm. This is done if you wish and access the Intex 38 mm program with larger hoses and larger sand filter pump.

Do you know the size of the inlet? I have a bestway sandfilter and I was wondering if this would work with it. I believe my connection hose is 2 1/4 inches.

@MortenWork

2 жыл бұрын

I don't know the sizes of Bestway and whether their accessories fit Intex products.

@stephennegrotti3448

2 жыл бұрын

@@MortenWork thanks anyway

Can I get a link were to order the stuff.

@MortenWork

2 жыл бұрын

Hi. Part number Intex 26004 or 26005. I bought on eBay. Have also seen them on Amazon

what about the jet fitting, i cant seem to find these parts ?

@MortenWork

2 жыл бұрын

The nozzle where the water comes out has a jet nozzle. Look at the link in the description

We need a set of exactly what you showed. What is the exact part number or name?

@MortenWork

4 жыл бұрын

The figures under two parts number 26004 or 26005. It may be worth researching prices as they vary greatly on the internet.

@mrfreezey1

4 жыл бұрын

@@MortenWork I'm not so sure if that is right. Because everywhere I've searched only has basically half of the kit your showing.. not even ebay. Where did you get yours from?

Is there is specific Reason why you've cut the holes while the pool was already partially filled with water? If I cut the hose while the pool is still empty and folded is there a risk that the hose will stretch once the water will be in?

@MortenWork

2 жыл бұрын

I do not quite understand what you are writing. But it does not give a problem and cut the hole if you lower the water level.

@Alceambidestro

2 жыл бұрын

@@MortenWork sorry for my bad english, worsened by the fact that I was using the voice keyboard :-)

@MortenWork

2 жыл бұрын

@@Alceambidestro OK. Try and use Google Translate, it works great for me. Then I will try and help you.

@Alceambidestro

2 жыл бұрын

@@MortenWork nevermind, the hole is already done and it works fine. Thank you :D

What is the kit product number? Or link please.

@MortenWork

3 жыл бұрын

Please see the description. There you will find part number.

What is the Intex Part number.

@MortenWork

Жыл бұрын

Please see in the description

what is the number for the kit?

@MortenWork

2 ай бұрын

It is in the description. Check for yourself if Intex has changed the number of the parts 😀

What’s part #

@MortenWork

3 жыл бұрын

See the description

Gonna go out cut my pool....won't lie I'm afraid 😨

@MortenWork

2 жыл бұрын

Do it quietly and it will work.

Can u help me

@MortenWork

2 жыл бұрын

What can I help you with if possible?