Can’t wait to see it

My Congratulations, it turned out great.

@CysCorner

Жыл бұрын

Thank you 🙂

Loved the project and your personallity, fun to watch. The scripture verse near the end was so great. Thanks for posting.

@CysCorner

10 ай бұрын

Thank you 😊

Beatiful work. My compliments

@CysCorner

Жыл бұрын

Thank you 😊

sehr schöne Arbeit Klasse

@CysCorner

5 ай бұрын

Thank you 🙂

Very satisfying

@CysCorner

Жыл бұрын

:)

LOVE YOU ❤ THANK YOU 🙏

@CysCorner

7 ай бұрын

👍🙂

Great job! This old guy needs to get some time off from weeding and get into my garage/shop and play.

@CysCorner

Ай бұрын

You really need to!!!!

Very good job you are a great artist

@CysCorner

Жыл бұрын

Thank you so much 🧡

you best in the world good job🇩🇿

@CysCorner

2 жыл бұрын

Thank you :)

Beautiful

@CysCorner

9 ай бұрын

Thanks!

beautiful . ciao Cy's Corner

@CysCorner

3 жыл бұрын

Thank you 😊

Love it

@CysCorner

4 ай бұрын

Thanks!

Great job as always. Thanks for sharing!

@CysCorner

3 жыл бұрын

Hey Phill!!! Thank you!!!

This is an incredible piece. Beautiful work Cy

@CysCorner

3 жыл бұрын

Thank you :) :) :)

This is awesome. I love it. Thanks for sharing!

@CysCorner

Жыл бұрын

Thank you!

Cy, Every one of your intarsia projects is wonderfully done! I mean that! This parrot is “absolutely amazing”. Your patience, dedication to perfection and choices of wood for your project is fabulous!

@CysCorner

3 жыл бұрын

Thank you :) :) :)

It's beautiful Cy, I love it!

@CysCorner

2 жыл бұрын

Thanks Jolien!!!

Schnauzers Rule!! I'm a Giant Schnauzer person of 40+ years! 😁😁 I'm also a bird person and scroll saw person.

@CysCorner

Жыл бұрын

Awesome!!!! 🧡🧡🧡🧡

You have a whole vibe to you that I really enjoy! Great work and wish nothing but the best for you!

@CysCorner

2 жыл бұрын

Aw thanks! :)

Love the colors, you made a new type of bird! Cockatoo Macaw...I love it!!!! Awesome imagination!

@CysCorner

3 жыл бұрын

I can't take credit for the new bird species, my cousin asked me to make this for him. I think it is a super awesome looking bird though!!!!

You really have mastered Intarsia Cy! Each of your projects just gets better and better. This parrot is beautiful!!! A person sure has to have patience to do Intarsia and you seem very blessed that way.

@CysCorner

3 жыл бұрын

Thank you Lori :)

Beautiful. Great Tutorial. Your verbal and visual instructions are very helpful. Thank You for taking the time to make this video.

@CysCorner

2 жыл бұрын

Thank you for watching, I'm glad it was helpful :)

Wow!! Cy the contouring of each of the feathers adds so much to the project. Great job.

@CysCorner

3 жыл бұрын

Thanks Jerry!!!! And that little tool is so helpful!!! Now I don't get chip out while making that dainty little hole! Thank you!

Nice piece ... love the colors you chose!!

@CysCorner

2 жыл бұрын

Thank you 😊

Just fantastic

@CysCorner

3 жыл бұрын

Thanks 😊

Good job amazing

@CysCorner

2 жыл бұрын

Thank you so much 😀

Cy, great job and It looks beautiful.

@CysCorner

3 жыл бұрын

Thank you!

Hi Cy. A beautiful project as always. Your color choices are wonderful for the cockatoo. I am going to link to the video from my blog today. I know that many of my readers will love to watch you make this art and hear your inspirational message. Thanks for sharing.

@CysCorner

3 жыл бұрын

@Steve Good Hello Steve! Thank you so much for adding me to your newsletter :)

awesome job i love it!!

@CysCorner

3 жыл бұрын

Thank you!

Possibly your best project yet! Great choice of wood colors and the blue was a perfect shade for the wood you chose. Any darker blue and it would not have blended in. (IMO) Love the new mask. Looks like it may be warming up more in your area.

@CysCorner

3 жыл бұрын

Thank you, I was pleased with the blue! And I agree another blue may not have gone so well with the other colors! We warmed up. Had a cool week and now its warming up again!

Wonderful work!!

@CysCorner

3 жыл бұрын

Thank you so much :)

Amazing work lovely

@CysCorner

3 жыл бұрын

Thanks!!!

The time, the patience, the detail, the fun, the inspiration you share that gives others hope in themselves, that they can do anything they set their minds to do...is oh so natural you Cy! What a beautiful God given talent you have in many ways. Its what makes you shine. Your intarsia projects and completions, as well as other type projects you do and Hubby too.. are completely awesome. You inspire us all. You are a World Class Champion! God Bless you. Mellanie 'Mel' Boone

@CysCorner

3 жыл бұрын

Hey there!!! Thanks so much Mel!!!!! :)

Very nice work! Congratulations!

@CysCorner

2 жыл бұрын

Thanks !!!!

Hi cy Good job Bird You good job video You thanks video 👍👍👍👍👍🏅🏅🏅🏅🏅

@CysCorner

3 жыл бұрын

Thanks Jason :)

Fabulous, that looked really difficult, Thanks Cy xx

@CysCorner

3 жыл бұрын

Thank you 😊

Wowwwww😮😮😮😮que trabalho espetacular! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@CysCorner

10 ай бұрын

Thank you 😊

Gorgeous! Just really really good! Also says we are created in his image and no feathers lol love your channel!

@CysCorner

3 жыл бұрын

Thank you! I always thought we have a spot where wings should go, right off the scapulas!!! But you're so right, we are made in his image, which is so very cool!!!

Great work on the intarsia Cy! intarsia is deffently one of your gifts you are very good at it :) heaven is a great place me and mom use to watch Kat Kerr talk about heaven all the time and then i guess she got to excited and went home to check it out :) Thanks for always sharing with us!💖👌👍😎JP

@CysCorner

3 жыл бұрын

Thank you JP, prayers and comfort for you 🧡

@IEnjoyCreatingVideos

3 жыл бұрын

Your very welcome Cy! and Thank you my Friend for the prayers as well!😎

Another great project! You always make it look so easy! Love your new dust helmet. I’ve been looking at getting something like that also but the price tag has been stalling me. Just want to make sure I’ll be in the shop wearing it frequently if I commit to that expense.

@CysCorner

3 жыл бұрын

Hi!!! Thanks! The helmet was spendy but I heard from another intarsia artist how much she loved hers and it was light weight. So I put it on my list and finally was able to get it!!! It is comfortable, light weight, and I can wear my glasses!!!!

Hi there, I’m hooked on Intarsia. Not go at it but I’m trying. Need lots of practice on the scrollsaw. Your work is outstanding and amazing. Wish I had you as a neighbor!! Lol

@CysCorner

Жыл бұрын

Hey! So glad to hear you're enjoying intarsia! !!! Our neighbors just sold their house, lol!

@elliotabascal7619

Жыл бұрын

@@CysCorner I would love to be your neighbor but I live in Palm Beach Gardens Florida. Question I have for you is where do you find your tools. Like the sand drummer? I looked it up and there very expensive. And how long did it take you to master the scrollsaw? Wish I can see your scrollsaw skills..

@CysCorner

Жыл бұрын

@@elliotabascal7619 Florida is a ways away! The Woodtek sander I use isn't made anymore but there is a Grizzly that is similar. amzn.to/3PuRt5K And yikes! Its nearly double in price since the last time I looked. Garage sales! I started on the scroll saw in 2010, it took a while to follow the line but it comes. Having a good working saw really helps. I still have lots to improve on but practice does the trick. :) Oh and the flex drum I bought from Judy Gale Roberts, it attaches to a motor. intarsia.com/products/flex-drum-sander

@elliotabascal7619

Жыл бұрын

@@CysCorner Judy Gale Roberts sell’s it. The ones I looked up is expensive.

beautiful job Cy, I made a Kathy Wise Kookaburra and won Grand Champion with it

@CysCorner

3 жыл бұрын

Thanks for showing it to me! I am excited to share it on OPP!!!

Awesome video, new subscriber

@CysCorner

2 жыл бұрын

Thank you and welcome!

Muito bom. PARABÉNS

@CysCorner

2 жыл бұрын

Muito obrigado!!!

espectacular trabajo

@CysCorner

3 жыл бұрын

gracias!!!

Absolutely beautiful craftsmanship. If you need deep penetrating stain try TransTint dye stains. They can be mixed with water or alcohol ( I use 90% rubbing alcohol) or 50/50 H2O and alcohol. Again stunning project, loved the video.

@CysCorner

3 жыл бұрын

Thank you so much for the info!!!

You did a really nice job on that challenging bird. Way to go. I envy you that cool respirator shield you got. It's way too pricey for me but a gal can dream. :) Here's a tip: Wipe a light coat of Armor All upholstery cleaner on the lens of your shield to keep sawdust from sticking to it.

@CysCorner

3 жыл бұрын

Thank you :) It is a bit pricey but hopefully it is worth it! It is so far and the company support is great! Thanks for the tip!

Beautiful work, Cy. Love the parrot. I have Judy’s feathered friends pattern to do some of these days and I’ll definitely be using some stain now I’ve seen how well it worked for you. Thanks as always for the video. 👍🏻

@CysCorner

3 жыл бұрын

Hey Humphrey! Thanks! The stain worked better than I expected. Here in the comments someone mentioned a stain called Trans Tint Dye Stains. Said they can be water or alcohol based or something like that. I am going tonbe checking them out if I do more staining. I love that pattern of Judy's, you could do some amazing colors with it!!!!

@caspianofnarnia

3 жыл бұрын

@@CysCorner Thanks for the tip, Cy. I looked and they have some rather nice “parrot” colours. 😁

@CysCorner

3 жыл бұрын

@@caspianofnarnia I looked too, they're a bit spendy but if only a few drops are used at a time the bottle would last for a super long time!

@caspianofnarnia

3 жыл бұрын

@@CysCorner I noticed that. I wonder how much you dilute it by. I guess that’s a how long is a piece of string question, 😂

@CysCorner

3 жыл бұрын

@@caspianofnarnia 🤣 I've used a similar dye for resin and it was 1-3 drops for about 6 cups of resin. So perhaps it the same? Guess a call to the manufacturer would tell us how long the string is! 🤣

WOWOW! Cy, this is gorgeous! I don't know if you have tried this, but I have seen in woodworking videos, where you can put small amount of course salt in between glued pieces preventing them from shifting. I have nor tried this, but thought I would throw it our there!!

@Intarsia82

3 жыл бұрын

This works well. Use the salt sparingly as only a few crystals are necessary to provide the gritty grip. Small amounts of salt will not affect glue adhesion. The glue is water-based and the salt will eventuslly dissolve.

@CysCorner

3 жыл бұрын

I have heard about salt helping with that, I even have a small salt shaker in the shop but never thought of trying it with intarsia pieces. I always think of when you clamp something together and it shifts and how the salt helps that. But it probably would help an intarsia piece from shifting! Thanks!

Очень красиво! 👍

@CysCorner

2 жыл бұрын

Огромное спасибо :)

@alanso8621

2 жыл бұрын

@@CysCorner 😉 You are making progress in Russian!)

Great job MSIC. You hit it out of the park. P,S. I hear that Darth Vadir is upset with you...something about equipment infringement.

@CysCorner

3 жыл бұрын

Ronnor! I laughed out loud when I read this comment! 🤣🤣🤣🤣

Sulphur crested cookatoos are an Australian bird all white with a yellow crest. Good job though

@CysCorner

9 ай бұрын

I made two of these, one was white with yellow. My cousin asked me to make this one in all different colors :) Thanks!

@Blueknsw777

9 ай бұрын

@@CysCorner it still looked really good even with the colours

@CysCorner

9 ай бұрын

@@Blueknsw777 Thank you :)

Con planos y tanta maquinaria así cualquiera....

@CysCorner

Жыл бұрын

Scroll saw and sander.

I love the piece but then i have a love of the birds too.... way to many here but love them all.... but if i may say something not to be critical but just a tidbit of knowledge if i may... cockatoos are all white except the black cockatoos which are black...And the Galah or ROsy Breasted cockatoo..... the Sulphur is which with exception of his crest which is a Sulphur yellow is all white... Also they are from Australia too.... your combining a McCaw colors which are vivid and stunning in life... but they are from central and South America to a bird in nature is white... try maybe using different woods that are different shades of white... I absolutely love the detail you are doing... it makes him just pop.... i hope she loved the piece as much as we did... sorry i was a party p%^per... i just figure you didnt know.... McCaws are a great deal bigger...more than double the Cockatoo

@CysCorner

2 жыл бұрын

I actually made another one of these in white with the yellow on its head. The person I made this for wanted it to be in all the colors. :)

Very Nice, Love watching you create stuff. I am working on something special but not sure when I will get it done, as my wife of 49yrs has to go into the hospital for a major operation. Oh on your ear protection, I would suggest you flip it around from the back, so the extra is not hanging down in the front, as it might get caught in something. Probably nothing would happen but never can tell. God Bless.

@CysCorner

3 жыл бұрын

Prayers for your wife, and good idea with the ear wire. Glad you're making things!!!

Great work. I have started a channel to show some of my work.

@CysCorner

2 жыл бұрын

Cool that you started a channel!!!!

Oh, almost forgot, that new helmet is great. Ask that “hubby” of yours to please increase the speed and/or adjust the fins on that downdraft table. It will help you immensely!

@CysCorner

3 жыл бұрын

Oooh, thanks for the info!

very good

@CysCorner

Жыл бұрын

Thank you 😊

@canhdovan

Жыл бұрын

@@CysCorner hello,Im canhdovan in Vietnam,5 years ago I watched your video,it inspired me and so I started doing like you,now I have made kinds of wooden puzzle and there is a channel in youtube called canhdovan,how can you watch them,thank

@CysCorner

Жыл бұрын

@@canhdovan That's so awesome! I'll check it out!!!

@CysCorner

Жыл бұрын

@@canhdovan I looked at your channel! I'm so glad you wrote me and told me your story of how you got started! You are an amazing artist! Have fun with your channel and keep it up. Blessings to you. 🧡

@canhdovan

Жыл бұрын

@@CysCorner Thank you very much,,I will always follow your channel and support you,wish you and your familly Happiness,Health and Luck

It’s absolutely beautiful! But… it is not a sulphur crested cockatoo. They are white with a lovely yellow (sulphur) crest. I am listening to them right now squawking away in New South Wales, Australia. 😊😊

@CysCorner

3 жыл бұрын

Thank you. :) No it isn't the correct colors, but it looks so awesome! I plan on making one that is white and yellow too!

@lynettewilson7421

3 жыл бұрын

@@CysCorner it certainly does look awesome!

Very nice job. I would like to ask you how you do with the writing (at the 15th minute). Do you burn with a pyrography or transfer letters? Thank you for your reply

@CysCorner

2 жыл бұрын

Hello, there are different ways to transfer, I like the heat transfer of toner the best. That is what I did here. I have made videos of how to do the different techniques. I'll leave links here. Transferring letters to wood: kzread.info/dash/bejne/qaqVpZZyoM3gnc4.html How did you put that on there? The transfer techniques I use: kzread.info/dash/bejne/aoillMdxhcTaZdo.html Inkjet Transfer Trials and Tribulations: kzread.info/dash/bejne/eIepz6Oylaq_qKw.html

@m-cl7304

2 жыл бұрын

​@@CysCornerthank you for your answer, it helps me a lot and raises a mystery

That is truly remarkable Can you advise me about getting diagrams Thank you

@CysCorner

Жыл бұрын

Thanks so much. I get my intarsia patterns from a few different places online. Judy Gale Roberts, Kathy Wise, Bruce Worthington, just look them up and you'll be directed to their patterns. Judy has some free patterns that are great for beginners.. I also use coloring book pages or drawings I think would be fun to make as an intarsia. Have fun and if you need more info send me an email. undeniablycy@gmail.com

Do you have trouble with that brand of blades breaking extremely fast. I bought some about a year ago and I am going through them faster than the other brands.

@CysCorner

2 жыл бұрын

Are you talking the Mofified Geometry blades? I've heard from someone else of them breaking fast but I haven't had that problem. Sorry to hear you're having difficulties, maybe a bad batch?

@joshgreer7196

2 жыл бұрын

@@CysCorner no it was there regular blades. They are very sharp just the grade of steel could be better. I will try the mofied Geometry blades to see if there are better. Thanks.

How can I get a copy of the cockatoo pattern?

@CysCorner

Күн бұрын

Hello! In the description box of the video I have a link to the Kathy Wise Pattern. But I will leave it here for you 👍 store7626357.ecwid.com/#!/Sulfur-crested-Cockatoo/p/277629275/category=35342241

Cockatoos are generally all white, or yellow.

@CysCorner

Жыл бұрын

Yes I know, but the person who hired me to make this wanted it in all these colors. :)

What size is the magnifying glass you use.

@CysCorner

2 жыл бұрын

This is the magnifying glass I have and use. It has changeable lenses. Magnification Light: intarsia.com/collections/hardware/products/new-led-daylight-slimline-magnifying-lamp

@Arthur-tu9ty

2 жыл бұрын

@@CysCorner thank you Cy. Happy thanksgiving.

@CysCorner

2 жыл бұрын

@@Arthur-tu9ty Happy Thanksgiving to you!

In relation to God and feathers; after Jesus was baptized the Holy Spirit came from heaven in the form of a dove and rested on Jesus.

@tamburina

11 ай бұрын

And this is lovely.

@CysCorner

10 ай бұрын

Yes! Can you imagine how awesome that would have been to see and hear?

@tamburina

10 ай бұрын

@@CysCorner I find it hard to imagine the complete awesomeness of our God.

@CysCorner

10 ай бұрын

@@tamburina Amen

Great video but you used a photo of a Macaw instead of the cockatoo, cockatoos look nothing like a macaw especially for colors

@CysCorner

5 ай бұрын

Thank you, this was a commissioned piece so I made it how the person asked me to make it. 👍I actually made another with the white and yellow like a cockatoo, I'm still working on it, hope to have it done this week!

@sydneymartin952

5 ай бұрын

@@CysCorner you did an amazing job on it, I'm still in the learning stage of doing intarsia. Thank you for your videos

@CysCorner

5 ай бұрын

@@sydneymartin952 I'm glad the videos can be helpful. :) There are many techniques out there, you will find which ones you like as you continue making intarsias 👍 Gotta tell ya I glued up the white and yellow cockatoo this morning!