So 30something female here, I was my Papa’s shadow for 13,years and he had me building gazebos, building my forts, anything outside and creating. So now convincing husband on building my skooloie. I’m doing research, u by far THE GOAT OF SKOOLIE BUILDING! Thanks, ur tips r going to seal the deal💚💚J.Covert-Bradley

Hey Chuck, can put the LINKS in the description? Unless I missed ‘em.

My Hubby and I are addicted to your videos! We started watching about 2 weeks ago. Learning so much from you as we are doing our research on building out our minibus.

This guy is a world-class great speaker / host. TV is dead. KZread is the future.

The laser level is a great idea but no mention of getting the bus level and keeping it level I have 4 slide on camper supports I put under my back bumper and front bull bar to get and keep it level. I have done 6 showers now for myself and others with fiberglass and gelcoat the oldest is 10 years old and no leaks, joins or mold and it is light and strengthens the enclosure, you can use fillets in the corners and fiberglass it all the way to the drain.

I LOVE the rounded “corners” ! They’ll look more appealing. Great job !

There are some tools that you need to build things. Circular saw, router, cutoff saw, drill, and yes, an angle grinder. I'm a weekend warrior having built things like a pool deck with a curved staircase and sliding gate, a 6' long table light fixture, a media cabinet integrated into a mantle etc. And then there are some tools just so you can tell your friends that yes, as a matter of fact, you do have a keyhole bit for your router and a biscuit joiner. Because there's nothing better than your buddies going "oh, wow, I wish I had a need for those". Not that I do, but I have them!

Chuck - You're one of the best. Thank you for your content. This video mentioned some links "below" for some of the tools. Me see no links.

No naps, work to do. Amazing cool tips, tricks and tools. Thanks for the links, helpful. The curved wall trick has unlimited options one could run with that build technique and go total abstract 💯🤙🍀

I've been anxiously wagging my tail! Thanks!!

awesome job. love your work!!

Where’s that link for that curve template tool?!

Fantastic wallpaper!!

Are you planning to use micro-cement for inside the shower? I know you wanted to hold it as a surprise but the anticipation is too much as I watch this bus moving closer to completion. Also to confirm the tightness, would it be a good idea to run air into the bathroom compartment so you can spot possible problem areas?

Chuck, you are an exceptional human. Put aside any doubt, you can can excel in any media if you let it happen.

Chuck, I have been searching around your channel (I'm new here, but have already watched some 20+ videos) for any details on what you have been doing for flooring in your busses? Hardwood? LVP? Glued? Floating?

Chuck, is the drill on that countersinking drill bit tapered? It looks like it from the video. As an alternative to the track saw I use an 8ft 2 piece straight edge I got at one of the big box home stores. It has a 1/4 in lip on one side and I just set that 4" back (the distance from the edge of the foot to the blade) from where I want the line to be and use my regular circular saw. If you make a mistake it's always longer than you want so just take a second pass to clean it up. Works great and it's a WHOLE lot cheaper than a track saw. Keep the good stuff coming buddy.

I love your bus (and videos)!

Great info. Quality info as usual Chuck! Nice wrapped corners. That wallpaper….. Aunt Mertle would be proud! 😂

Thank you. What glue do you use to fill the cuts for the curve? Do you mix sawdust into the glue? How to you determine how deep the cuts need to be & how many cuts?

Once again another absolute masterpiece tutorial. Chuck Cassidy is THE AUTHORITY in all things skoolie. There is no other man that has more knowledge about building out a bus than him.

@ChuckCassadyYT

9 ай бұрын

Hahha you’re way too kind

really looking forward to seeing how your bus turns out

@ChuckCassadyYT

9 ай бұрын

me too!

Link to the Template Tool??? And the other promised links?

Question: Would it make sense to put in a dehumidifier? Then instead of having the water collect and having to manually dump it, route the water collected from the dehumidifier tank into your water holding tank?

Awesome video as always. Where did you pick up that adjustable angle maker. I have seen every tool you have used on the channel, but that's a new one and looks pretty magical to help get the roof curve correct. Keep up the great work and keep pushing. 👍

Beautiful work. Love the wallpaper. ❤

REALLY great episode, Chuck Cassady. Superb

Here 85 minutes early. Conveniently got some drywall today

@bigrollinghome2091

9 ай бұрын

the first rule of dry wall club is we never admit to knowing how to do drywall ... the second rule is never volunteer to help someone else do drywall ... especially ceilings

seriously impressive skills, blew my mine! great video dude!

Looking great and really coming together. Thanks for all the tips!

@ChuckCassadyYT

9 ай бұрын

Thanks for watching!

Nice video, etc... Dude !! that wallpaper is Amazing !! I love it !!

Another great video, thanks so much! Love the curved wall you installed... I kerf wood like you did in creating borders in landscapes and was thinking that you should note how deep you make those cuts in the plywood so that viewers don't over do it (or under do it) when creating their own curved walls, so the end result is as great as yours. Dig that wall paper too! Keep up the great and informative videos!

@ChuckCassadyYT

9 ай бұрын

Awesome, thank you!

Nice job

Can't wait for the ceiling video.

@ChuckCassadyYT

9 ай бұрын

tune in next sunday!

Dang bud! Did that wallpaper come with a complimentary padded toilet seat? Great work and explanation about the walls

30:25 brilliant shot! ☮️❤️🌈

i need to load large atv 7ft wide--any advice on making a full width swing out rear door? thxs

That curved wall is so worth the effort! Question for ya chuck, you said that you were putting in the front and back walls and then bringing in the side walls to hold them in. Essentially locking in your front and back walls. In your buses case, you have your windshield wiper motor under your front wall that is now locked in. If you had to replace the motors, how would you now go about getting at them?

What is the advantage to adding your interior walls directly to the strapping before the exterior? Verses skinning all exterior walls and ceiling first and then adding the interior ones to that or with longer screws through it? I'm thinking the pocket screws would still work at all the strapping points of contact and you could use longer screws to attach interior walls through the surface of exterior walls. I get that it hides the scribed edge and makes seams tight or rather it's easier to get a tight seam. Another way to ask, is it ok to do exterior walls first to seal off the insulated cavity or is there a disadvantage to doing it that way?

A Idea for someone is doing a round bedroom and making the corners closets 🤙

HI Chuck. I have been watching your channel for sometime and am grateful for the advice. In this episode you showed your custom shower pan. I am working with my sheet metal guy on building one now and our only concern is getting a flange dimple for the shower drain... does your outside provider have a special die to do that or could you help with ideas? we are even willing to request a custom pan from your supply if necessary. Thank you!

Do you have a link for where to purchase the Baltic birch used on this episode?

curved wall is great. better then diagonal, how long did it take just to hang the walls, thanks

I didn't find any tool links in the description 🙏

Wow! I really liked how your shower came out. Windows are great! Next please..😀

Will do. I'm EST. What time do you start?

how much did the showe pan set you back chuck? very nice

What supplier did you get your sheet goods at?

How do you trim the rest of the windows?

Anyone know the jigsaw blade he had and where to get the curved scribe tool?

Do I need to disconnect the batteries if I’m doing Welding on my Skoolie?

@alanhat5252

9 ай бұрын

Don't take the risk when disconnecting is so simple! You should also disconnect or even remove any computers/ECUs.

Where are the links for the tools you suggest?

Chuck, buddy, you did not link the adjustable curved temp laying tool in the description, or at least I can’t find it. Can you please add that link to the description so I can get one ordered please

@ChuckCassadyYT

9 ай бұрын

I updated it$

@1982MCI

9 ай бұрын

@@ChuckCassadyYT your a good man Chuck!

Where's the links at?

What's the story behind "the sneeze "

@tristanlasley8030

9 ай бұрын

Pst.. manual rec. settings, are easier to edit in post.. the brightness change was distracting..

Why is dry wall bad to use?

Is it just me or did he not add any of the links below that he said he was adding?

6:25 Why hello there, beautiful... where have you been all my life? Like, seriously. Why hasn't this tool shown itself during ANY of the hundreds of google searches I've done for exactly THIS tool?!

love that curved wall

I've only seen a handful of youtubers (literally) that could build showers/bathrooms in their van/tiny homes, most just skip it because they just flat out don't know how to do it.

@raymondpomfret4214

8 ай бұрын

And???

where do you come up with the money for this shit man. all the victron, entire bus out of baltic birch, spray foam, advantech (not the worst part). You're not skipping any steps here. Big fan, just a little green over here.

@ChuckCassadyYT

9 ай бұрын

its my job! all the money i get from youtube and consulting and doing solar installs is going into this build, of course i get discounts as contractor, but at the end of the day, there isn't a secret. I bust my ass and there is a reason this build has taken 2.5 years so far

why dont you do ceiling first

great video Chuck but wall 'paper on that beautiful birch any way it is your bus and if you like it who am Ito disagree .

And that's why most builders skip the shower build because it's too complicated. Sad to say they jump into the lake and take their chances with the Meg. lol

NO LINKS TO EQUIPMENT.