Poor Matty he needs some sleep Holly buy that man a big steak and beer he needs it

@robertquackenbush5547

Жыл бұрын

He deserves that steak and a few beers hoolie

@Jan-pw4po

Жыл бұрын

He definitely looks tired

Matt knowledge is vast and he puts his all in to what he knows, great person at heart😊

It's funny that despite the occasional and unnecessary "uNsUb" comments from very few... your subscriber count continues to climb. It's almost like there is a market for all types of channels and formats. Keep up the fun vibes and good work, plenty of us are enjoying it! 😎And that was rad Matt asked (solid choice) and you accepted to be his spotter in the wrecker games; you are definitely gettin' 2023 off to a great start!

Such jocularity and camaraderie, love this channel.

Oh Hollie this is so exciting! Nessie is a good girl!! Vrrooooom! Nessie will start purring on the first crank! Woohoo! Cant wait!! #TeamNessie

Loving this build. I wish I knew more about the transfer cases to split front and rear. Get some rest. God bless

I think it’s fair to say Robbie is getting it after the race! Looks great Y’all!!

You definitely need get away before race time some R&R

here is an idea for the gas peddle issue, make the peddle wider, then no need to move it. hope this helps!

Isn't there ANYONE in Utah that uses cutting fluid or compound when drilling holes? Even a squirt of soft soap or a swipe of a soft bar of soap like Ivory after a spring loaded punch prick would make the job much easier and save wear and tear on the bits.

Using the fancy distorted thread lock nuts on the ram. I like it!

@MischiefMakerTV

Жыл бұрын

I wish I had them all over the car. I had a spare clamp from Chris at the4x4garage.square.site and I stole the hardware from that kit. All his clamps come with premium hardware. I especially love that the clamp itself has 12 point bolts instead of socket head Allens that always fill up with dirt and wood and are a pain in the butt to remove

It is apparent that with all the great transformation of Nessie from a small child to competent adult that though she is blue she will never be blue.

Getting closer and closer to the end. I’m very curious to see how this goes!

You hear the saying “To many Chiefs in the Kitchen “ You can sometimes find equivalent in the race shop when you get closer to finish when folks are tired and you are getting closer to loading the race car on the trailer headed to race. Then once it is unloaded at the race site a new mode develops that is “What do you think WE need to do to get to finish line”

Moving right along!! And your co-pilot looks like he needs a long nap!! ✌🐢

@MischiefMakerTV

Жыл бұрын

We are all zombies at this point…But it’s gonna be so worth it 😁

@lindavaughn1927

Жыл бұрын

@@MischiefMakerTV just make sure you're well rested before you go driving this beast! I'm a worry wart! LOL can't help it! ✌🐢

Great video and you can always customize your brake pedal and move the pad over so that gas pedal is installed in the right place and God bless from GA and stay safe

Out of all the various and different rigs, that I have seen at all the different jobs that I follow by subscribing to them, this one here, Is the one that I truly salivate over. Be still my troubled 58 year old heart!! don’t get me wrong, I am not knocking any of the other shops. Nor am I knocking any of their vehicles. All of them have really excellent Rigs. It’s just that this one is my, MY-FAVORITE!! I would love to own this so bad!!! But with one BIG CAVEAT!! Far far more, LEG-ROOM FELLAS!!!! I’m 6‘3“!!!! and it appears our lady of the outback is 6 foot. Or at least like my lovely born & raised Wyoming wife, 5‘10“. Suffice to say, it’s easy to see why Hollie, Our lady of the outback, NEEDS MORE LEG-ROOM-FELLAS!! At the other shops, let’s take The Fab-Rats boys. Out of everything they have over there, I would absolutely love to buy this and take it off Paul’s hands. His FJ 45 pick up. Right now, I have a 1965 Toyota FJ45 PICKUP Being completely restored. (FRAME-OFF.) When, it’s done, I’m having it painted either candy apple red or very bright yellow with metal flake. There was a paint that used to be called Mercedes yellow and I’m looking for that right now. It was lightly metal flake in the paint. 🎨. Over at Matt’s shop, This one is an easy one for me. I would love to buy his, MORRVAIR!! hopefully I spelled that correctly if I didn’t, somebody needs to correct me. I have lusted after that vehicle ever since the first day I laid eyes on it. Back when Corvair used to sell them I had an aunt that owned one for over 10 years and we would all pile in it!! Lol 😆 I, loved that car and so did my siblings. That’s about it. I really like Rory as a guy. Can’t help but like him. And his off-road-skills? Forget about it. He is second to none. I know if I was broke down in the outback no matter where it was from Montana, Alaska, Arizona, the slippery red clay woods of Kentucky, or even Utah. I would call him to come get me. But outside of that, I haven’t seen anything around here shop that I would want to buy.

Lookin' Amazing Guys!!! Your Gettin' it Done!!! It's Gonna be Awesome!!!

WOW I'm glad your getting so close to being it to life . I bet you guys are to . Great Video as always . Hope you record the starting up. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀

Ok. It says, 5 hours ago this video dropped. I was notified on my phone when I was in town with my wife. Running around our little town of Eureka, Here in NW Montana. Oh. It has been under an on and off, off and on, Avalanche-Warning for the last 8 days. The US Forest Service has been coming out every day on the north side of town with their big cannons and firing them off strategically at different places to create smaller avalanches to keep the snow load off. So that a major avalanche doesn’t get triggered and then comes sweeping down The Valley, And wipe away our beautiful little town of Eureka!! Our log home is 5 miles from the Canadian border. Up off the, YAAK RIVER ROAD. If you Google Earth it, the road, you’ll come to the spot where the pavement ends and the counties very wide and very well-maintained. Dirt road takes over and take you all the way to the border. You don’t have to worry about any traffic out here in these parts. Because there are far more GRIZZLIES 🐻 and WOLVES 🐺 then there are people. BY FAR.

Looking better every day.

Good morning Hollie!

Killin it!! Been cool watching it all come together

@MischiefMakerTV

Жыл бұрын

Thank you so much, Josh! Hope we cross paths again soon. 😀🤙🏻

Looking good everything falling in place right on be'gah,,,,thank you mam ha ha ha ha

Ya gotta love a well stocked Ace Hardware store.

Keep an eye on the diff cover bolts. Assist rams off diff covers ALWAYS loosen the covers up

You must really be tired. A whole video and no hat😂. You made some fans very happy with your lovely hair. Go Nessie 🚙

Nice fabrication and good luck in the race

🤘 looking good!!

I've been driving for about 40years, but not sure if I'd have what it takes to be a good racing driver. At what point Hollie do you expect to discover if you can make the transition from very capable rock crawler to a competitive KOTH racing driver?

@jeffreymorris4827

Жыл бұрын

On the Podium

@gordonmurray3153

Жыл бұрын

@@jeffreymorris4827 so, by that response, I take it you are unfamiliar with the US offroad race 'King of the Hammers'? Or, come to think of it, motor racing in general.

@jeffreymorris4827

Жыл бұрын

@@gordonmurray3153 sounds like you don't know what a Podium is. Or what you have to do to get there. Does the hammer's not use said podium? Maybe they them should get one. But I bet they them have one already.

With such a small throttle pedal sitting so high from the bulkhead, wouldn't it be better racing braced with a bigger hinged surfboard style pedal, for better control, to prevent kangarooing in the yumps, as your legs & feet inevitably bounce around at high speeds? Imi the dumb question is the one you wished you'd asked, but never did.

Lots more good thing done!! Nessie is quickly becoming the beautiful beast she is meant to be!! LOL!!

Nessie is looking good!

Red Bull will give you wings, Holly...🧚‍♂️

Man y’all are stressing me the hell out trying to get it done. Can only imagine you guys feel😅

Im having panic attacks. Lets get er done 😳😳👁️

Atleast it looks to be a braw day there. So drink some iron brew and stay strong. There will be time galore to celebrate when it's done. Then you can crack open a good bottle of Scots Whisky and pass a wee bit around to celebrate. It's a bonnie Jeep and you ken it's being done right.

there is no Fastenal in the area most hardware stores the bolts are grade 2 and have limited grade 5 or grade 8, I have seen people buy grade 2 and not have a clue until they shear off at the most inopportune time and i have seen the use grade 2 on suspension when they require grade 8

@MischiefMakerTV

Жыл бұрын

Luckily there is an amazing Ace Hardware in St. George that has an great supply of grade 8 hardware. That’s usually where we get our suspension hardware.

@JT_70

Жыл бұрын

Tractor Supply carries a wide selection of Grade 8

So when does testing and tuning happen? KOH starts next week! Most teams are already out here pre-running and fine tuning.

@MischiefMakerTV

Жыл бұрын

Next year we’ll be out there earlier. Just not possible this year. Usually we go out around February 20. Feel so strange to still be in Utah this close to the race.

👍☕cz

👍

So close and yet so far!

Thursday night at 10:47pm Utah time

I may have missed it but was there no way to do hi steer for the tie rod?

I see you're running a Radesigns shifter. Have you used his shifter before? I have one in the buggy I'm building but its not done yet so haven't been able to try it in real life. Mine is for a Jeep AW4 and its nice to be able to set the gating to whatever you want.

@chrisclinard1907

Жыл бұрын

Never mind I just watched the previous video LOL

My girls can't wait to cheer you on when you hit the lake bed!

@MischiefMakerTV

Жыл бұрын

Miss you guys. Thank you for the support!

Regarding placement of the ram clamp on the tie rod. What happens when you turn towards driver? Doesn't the longer part of the tie rod to the driver's side of the clamp have flex?

@MischiefMakerTV

Жыл бұрын

Of course, there is some flex, but the hydraulic ram is simply there to assist the mechanical link (drag link) that still exists. you’d have to conclude that those forces wouldn’t be any different than the forces the tie rod would normally see with only the drag link attached (which is attached further away at the passenger knuckle/steering arm). And steering box/drag link only setups are pretty proven at this point. More specifically, it is less than ideal, IMO, to attach the ram at the center of the aluminum because of the fact that it will be flexing against rocks and other obstacles we hit. The aluminum itself can take the abuse (I’ve run a similar 1.75” 7075 tie rod / 2.5ton steering kit on my rock crawler got the past 3 years - in both configurations), but the rod for the ram itself is not anywhere near as flexible and is prone to bending (the aluminum can effortlessly flex 6” in any direction and still return to its original position because, as I’m sure you know, it has excellent memory). Because of the ends (in this case heims) themselves, this particular setup is closer to only 1ton Steering as opposed to 2.5ton, but given the size and material of the tire, I expect that to be more than sufficient for this application. 😊🤘🏻

im in Anchorage, Alaska. town is only 12x10 miles. i see you travel what are your travel times . mine are 30 min side to side. lol

Was it ncie to sleep in the car? Then the sitting positions is good!

Fired up Thursday? Shouldn't you be in Johnson Valley by Thursday for pre- running?

@MischiefMakerTV

Жыл бұрын

We’re heading out on Monday. We’ll pre-run during the week. I’m not really that stressed about pre-running, I’ve got a pretty good comfort level with the entire area since we wheel there so much and I’ve got a brand new car, I’m not really going to be pushing it that hard. Getting to the start line is the first goal, getting to the finish line would be great, but there are a ton of variables that could prevent that.

what is left of the original jeep ?

concerned that the ram will bind with the steering when sitting on the ground

@johnmeeker739

Жыл бұрын

never mind

I don't always trust science, but magic has never failed me.😂

This build is supposed to be DONE BY WHEN ?

Is the diff cover/bolts strong enough to hold the hydro assist push? I guess we'll see...

@MischiefMakerTV

Жыл бұрын

Plenty strong. Been running it that way on MischiefMaker for the past 3 years.

@abnpthfdr2934

Жыл бұрын

@@MischiefMakerTV Excited for the progress. Can't wait to see it doing its thing!!!🤙

Holly, what suspension is on mischief maker? Thank you

@MischiefMakerTV

Жыл бұрын

It’s a Rock Krawler 3-link rear and the front is a custom 3 link using ARTEC brackets.

You need to introduce the puppy

😎🇺🇸🇺🇸😎

Is it going to get painted after the race ?

The lightbar was no longer covered.

What class is Hollie racing in ? 4500 class?

Took years of watching MASH to come up with that last comment from me

Great but tiered team

We ? Them… You know in race jeeps you use a caged pedal so your foot’s locked in…

@MischiefMakerTV

Жыл бұрын

Some do use caged pedals, I will not be.

Nessie is cool n all but i am intrigued by team RUD A MAKER what's going on there???

@MischiefMakerTV

Жыл бұрын

That project won’t start officially until late March

Are you going to run it

Where are your Nessie and your face stickers ?

Question are you getting grade 8 or grade nothing from a hardware store

@MischiefMakerTV

Жыл бұрын

All hardware will be grade 8. We just installed the final hardware on the suspension last night. Obviously, we weren’t going to setup the suspension and other parts with final hardware over the past 7 weeks…

Holly, many of us viewers are concerned about you diving into the deep end. Do you have any other racing experience? In order to go fast you have to be comfortable driving on or over the edge of control for extended periods. Is this something you've done in the past?

I hate to jinx you Holly but I say it doesn't start right up.✌🏽. Hey you asked for a comment.😊🙋🏽‍♂️😊😎.

@grant4176

Жыл бұрын

🏆 Congratulations, you have won first place for being the Biggest Wet Blanket on this channel. We are sending you and your black negative cloud to anywhere of your choice to go and please leave your communication devices at home!!! #TeamNessie does not need any negative vibes!! 😎 Enjoy your trip and dont rush back to this channel! IMO

@timcaviezel69

Жыл бұрын

@@grant4176 Grant quit drinking the Kool-Aid. She put it out there on the Internet. He can comment .get over it.

@MischiefMakerTV

Жыл бұрын

I bought a tested, tuned and running motor. It ran before being shipped. It ran when it was tested on the pallet before being put in the Jeep. It should run after being put in the Jeep. 🤷🏻‍♀️

@JT_70

Жыл бұрын

@@MischiefMakerTV It’s going to start right up and sound incredible. I would love to hear it.

@grant4176

Жыл бұрын

@@MischiefMakerTV Boom! 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Nessie's mum has brains!! I expected nothing less! Woohoo! Nessie will start the first time!! Yay! 🥳🥳🥳

Ummmm, This is like twice in 2 videos that I see you drilling sideways. You guys have a workshop, so pop it in the drillpress already! And if you don't have a drillpress, what are you waiting for? It\s just as essential as a grinder and a welder! Oh, and my guess for running is midday on Saturday.

"Hey my lovelies" , probably the best KZread intro since " We got a call " . And thanks for the music ! If possible, comment the music you use. It needs mentions and support as well ❤️‍🩹

Oh Hollie this is so exciting! Nessie is a good girl!! Vrrooooom! Nessie will start purring on the first crank! Woohoo! Cant wait!! #TeamNessie