Installing The Renogy 200 Watt Solar Beginners kit On our RV
In this episode, I install a Renogy 200-watt solar system on my RV. It's easy and economical. I also got another Weize Lifpo4 100 ah battery increasing our total battery capacity to 200 ah.
CHAPTERS
00:00 INTRO
02:49 INSPECTING THE SOLAR PANELS
06:20 TESTING THE SOLAR PANELS
09:00 INSTALLING THE WANDERER PWM CONTROLLER
16:20 USING THE RENOGY DC HOME APP ON YOUR SMARTPHONE
18:19 INSTALLING THE MOUNTING BRACKETS ONTO THE SOLAR PANELS
18:46 DETERMINING WHERE TO MOUNT THE SOLAR PANELS
19:38 MOUNTING THE SOLAR PANELS TO THE RV ROOF
22:46 WIRING THE SOLAR SYSTEM
31:08 ADDING A SECOND WEIZE 100AH LIFEPO4 BATTERY
32:00 CONCLUSION AND FINAL THOUGHTS
Amazon affiliate links to items in this video
Renogy 200-watt Starter Kit with 30a PWM Wanderer Controller and Blue tooth module
amzn.to/42pyVeb
Renogy Blue tooth Module BT-1
amzn.to/3lotHP6
Double cable entry Gland
amzn.to/42kl6O3
Weize 100 ah lifepo4 battery
amzn.to/3yNZ48P
Using these links don’t cost you any more money but it helps support our channel** Affiliate disclaimer: some of the above links may be affiliate links, which may generate me a sales commission.
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”
#rvtips
#rvsolarinstall
#renogy200wattkit
Пікірлер: 21
Thank you for showing how to check that the panels work! I checked mine and they work. Have had them for a year before I could get them installed. You are the only one I have seen so far who showed doing that.
@RvTipsandTrips
7 ай бұрын
I have always done that. It would really suck going through the work of installing only to find that it doesn't work.
Nice setup. Greetings from Jamaica.
@RvTipsandTrips
8 ай бұрын
Hi in Jamaica. The system keeps growing now lol
@lawrencedavidson6195
8 ай бұрын
@@RvTipsandTrips I understand, i'm addicted to solar too, and mine is constantly growing as well.
Long time to see. Nice project! Looks like you got slimmer. Keep up the good work.
@RvTipsandTrips
Жыл бұрын
Thanks Danny.
Looks good. I don't do much boondocking anymore. If I do its usually just one night as I travel and my batteries will hold for a night before I run the generator.
@RvTipsandTrips
Жыл бұрын
Boondocking helps when traveling the midsection of the country. Its also a nice break from RV parks.
Not sure why Renogy sells them wire kits with both wires black.. The BougeRV wire kits are One Red and One Black for half the price. But the same company makes them all...And the BourgeRV kit comes with extra connectors. To use as disconnects at the Battery..
@RvTipsandTrips
Жыл бұрын
It was part of the kit. Color coding would be nice.
@WizzRacing
Жыл бұрын
@@RvTipsandTrips Yeah I seen the price $40.00 for Renogy ones 10 foot #10.. Not colored. Then I seen the BougeRV ones for the same cable for $20.00..I said self.. This is a no brainier for the same cables..The extra connectors was a bonus.
Can a 1/4 inch hole be drilled on top of the aluminum panel frame without hitting the panel itself?
@RvTipsandTrips
6 ай бұрын
I dont think you can do that. Not enough clearance. There are quite a few mounting holes in the frame to use.
Did you install a disconnect or trippable fuse between the solar panels and the charge controller? I see some places say it is required, especially if you need to shut off or remove the battery
@RvTipsandTrips
11 ай бұрын
I added a inline 30amp fuse between the solar panels and the controller. I bought the inline fuse blade holder at an auto parts store. Its intended usr is for automotive power amplifiers. You can easily pull the the fuse to disconnect the solar from the conyroller when working on the battery bank.
F.Y.I.I DID a video on this panel with my thoughts, Also i called Renogy and informed them about using plastic or whatever that blue stuff is, heat and uv might be a issue in the future on the corners.
@RvTipsandTrips
Жыл бұрын
That blue plastic corners is new to me. The system I installed years ago didnt have that. I will keep an eye on it. If it becomes a problem bracing it with angle brackets maybe a solution. Thanks for the heads up!
@Yukonjackman1
Жыл бұрын
@@RvTipsandTrips Try adding a primer and a good reflection paint , I tried some aluminum tape no success so paint time i like your suggestion on adding more brackets.
@WizzRacing
Жыл бұрын
That plastic corner is there to control flexing of the panel while driving. A solid ridge panel would cause damage if it rattles or Flexes under load...So I would just leave it alone. As the mounting hardware will hold the panel still...
@RvTipsandTrips
Жыл бұрын
Thats great to know. Thx