Am ordering mine now. That’s the first time I’ve saw one of them risers 👍🏻✅

Super nice upgrade. Glad I ordered one with black Friday discount

Looks actually very good! Good job!

Anyone adding this or any other wing riser, do yourself a favor and pick up some 5/32" Washer Fluid Line/Vacuum hose to extend the line for the rear washer fluid dispenser. Trying to stretch the existing line is super difficult. The factory line has a coupler near the rear fluid dispenser with about 2 inches of hose added to that. Simply replace that 2'" section of hose with about a 4-5" piece to give yourself some workable slack.

This is definitely on my list, I need this !

Given the rs wing is a direct fit on the st I’d be curious how aggressive the rs wing would look with this.

I have been looking for something on the market like this I hate how the other riser make it look broken, I appreciate you making this video i ordered a month ago it just came in installing it later today.

I just got a 2017 ST and in my little research this is by far the best looking riser.

Wow that looks way better then the 30 buck risers

I got mine today took the three weeks to come in, it looks way better the the DIY I had on it.

Looking GOOD

@AbnormalGarage

Жыл бұрын

Thanks!

Looks good nice contrast... Does the riser helps with down force... 👍 👍 👍 🇿🇦 🇿🇦 🇿🇦 Sunny South Africa

Looks good

How does this riser effect the washer spray location?

Hey o have a Ford se hatchback , my question is if spoilers st can fit ? , nice video !!!

@luissequeira5774

2 жыл бұрын

Yes

1. Do you think blue Loc tite would’ve been overkill for the extension studs? 2. Or firewall rubber plugs for the wholes you covered with tape? 3. Could you have applied some heat (heat gun) to reshape the driver side and match it flush or just one of those things with fiberglass?

@AbnormalGarage

Жыл бұрын

Loc tite would be fine if you’re worried about the bolts unthreading. Rubber plugs would be a good upgrade from the electrical tape we used, and adding heat might’ve helped reshape the fiberglass.

Did you have any issues of the third brake light harness plug being short?

@AbnormalGarage

6 ай бұрын

Didn’t have any issue with the third brake wiring. The rear washer hose could’ve been extended though.

Assuming the price wasn't a factor, do you think the full gloss version would look better?

@AbnormalGarage

3 жыл бұрын

I like the look of the gloss ends and the matte center. You don’t really see the center section any way. If price wasn’t an issue I’d say color match the ends and gloss/matte black in the center.

Great video lads. Just wondering if you guys know anywhere to get the ST spoiler that would fit the standard 2012 model, not ST focus. Looking around everywhere and can’t find any reasonable ones 😩

Barnsley 👍🏻😂

the standard version is only to be painted right? and can it be mounted on SE spoiler?

@AbnormalGarage

2 жыл бұрын

Yes, and I believe it’ll work with the SE spoiler. You could email delta styling to confirm fit and finish for an exact answer.

@gianluca8320

2 жыл бұрын

@@AbnormalGarage the standard version? Only painted?

Do you think this would fit a 2015 se?

@deltastyling7597

3 жыл бұрын

If you have a stock spoiler then yes, but feel free to send us a picture of the rear of your car and we can best advice 👍

@Colicious89

3 жыл бұрын

I want to see this when you’re done if you use the stock spoiler.

My ST has the same gapping issues with the wing stock, these cars are notorious for uneven body lines

Does anyone know, if the riser does fit on a 2017 focus mk3.5? I really don't like the stock Kind of "spoiler"

@AbnormalGarage

2 жыл бұрын

It fits both the mk3 and mk3.5

@c4lviiin756

2 жыл бұрын

@@AbnormalGarage and also the non St Version?

@AbnormalGarage

2 жыл бұрын

I’m not sure on that. Others in the comments are saying it works on the SE, but you might want to email Delta Styling to verify.

@gofast8144

Жыл бұрын

@@c4lviiin756 on their site. The “Z” mk3 I believe is our SE models in the states they have a riser specially for base models

What’s the price converted to usd?

@AbnormalGarage

10 ай бұрын

I believe for the options we picked it was $200ish +shipping. Try searching on Google "British pound to US dollar" and it'll bring up a converter. Then you can type in the amount to see what it'll cost in USD.

Where did you purchase these please?

@AbnormalGarage

2 жыл бұрын

We got it from delta styling. I’ve got it linked in the description.

mine arrives in 3 weeks. and, no. i didnt want an RS spoiler either

Where can I order

@AbnormalGarage

2 жыл бұрын

We ordered it from deltastyling.com. I've got it linked in the description.

Takes to long to come in... really like it way better then risers and the DIY... and price is a lot ... but it looks so much cleaner ..

After purchasing this I’m very displeased with the hex bolts being too long they definitely needed washers and were not supplied the bolts they give you are very junky and strip easily with the correct tool I recomend if you buy this get better hardware from home depot and pick up some washers because it did not fit easily. For a $300+ wing riser you think you would get a little bit better quality of a product.

What's this called

@AbnormalGarage

2 жыл бұрын

It’s called a wing riser, or spoiler riser. I’ve got it linked in the description of the video if you’re interested in it.

Tell me you don't get pikachu ears vibe from that.