I'm a civil design engineer. I'm young in the game and have only been practicing for a year and half. This video was very informative for the construction process to see it in person rather than just the plans. Thanks man.
@DLHFarms
Жыл бұрын
Awesome!
@JakeBrakeIH3 жыл бұрын
Been watching your haying videos for years and found this really neat. My day job is working at a waste water plant and i frequently jet spray our sewer lines so its neat to see how they are installed. Thanks!
@20truck2 жыл бұрын
It's really enjoyable to watch an experienced operator run heavy equipment. It's amazing how precise you can get things in commercial construction with gigantic pieces of equipment, and people don't realize just exactly how difficult that is to do. I remember when I was talking to your dad about The screened topsoil he was telling me he was working in Blacksburg on a large job.
@DLHFarms
2 жыл бұрын
Thanks Troy!
@ihus99503 жыл бұрын
Modern technology sure helps you on this job, Thanks for sharing Dennis 👍
@DLHFarms
3 жыл бұрын
That’s for sure
@jonvon2044 Жыл бұрын
Nice video. Just did my first day as a helper for a company this for a gigantic retirement community, such a massive scale.
@amped52343 жыл бұрын
I laid pipe in the late 80s. It seemed like everyday I'd hear, put lots of soap on it we don't want to roll a gasket.
@DLHFarms
3 жыл бұрын
Yep heard that several thousand times haha
@sterff89903 жыл бұрын
I always enjoy your construction videos! Nice to see how it’s done in different areas.
@DLHFarms
3 жыл бұрын
👍 thanks
@peterwarnstrom88723 жыл бұрын
Enjoyed seeing how you do this work. Thanks
@DLHFarms
3 жыл бұрын
Thanks!
@donstravelsandrants.3 жыл бұрын
That was just great to watch. Loved it. 👍🙂
@DLHFarms
3 жыл бұрын
Awesome!
@charlesriley48623 жыл бұрын
Great 👍 videos like how you explain GPS for us older string line operators
@DLHFarms
3 жыл бұрын
👍
@christopherriddle27343 жыл бұрын
Awesome Video! keep us up to date!
@DLHFarms
3 жыл бұрын
👍
@Richard-ob5zn3 жыл бұрын
Learned a lot, thanks for sharing your knowledge.
@DLHFarms
3 жыл бұрын
👍
@benelkins25107 ай бұрын
Nice job. Thanks for doing a video.
@seana3ddig3383 жыл бұрын
I think your videos are the best I used to do a lot of pipe work and I would lining up my Laserbeam with a plumbob none of that all transit needed people spend a hour setting that stuff up I get 400 feet long gravity sewer maybe a 10th off left and right The team I had we could get out of a 16 foot manhole on a 400 foot run in 20 minutes with the trench box On grading and online we could get two runs a day no problem
@jshan8205
3 жыл бұрын
Could you explain how you set it up and lined it up with a plumb bob?
@mp36253 жыл бұрын
Team effort makes it look easy...
@2xKTfc3 жыл бұрын
That pipe laser is amazing! The only thing allowed to be crooked are curly fries!
@DLHFarms
3 жыл бұрын
Haha
@coleslaw2394
2 жыл бұрын
And politicians
@donmacdonald77583 жыл бұрын
Nice job, I think you ve done this once or twice before, LOL. It s a lot of work getting the grade set. Thanks from Georgian Bay.
@DLHFarms
3 жыл бұрын
Yeah I’ve done quite a bit of it.
@JohnJohnson-vx2wr3 жыл бұрын
Thanks for sharing Dennis. Thank god for gps.
@DLHFarms
3 жыл бұрын
Absolutely!
@mubiruchristopher91403 ай бұрын
Job well done brother
@DLHFarms
3 ай бұрын
Thanks
@hillsiderepair2 жыл бұрын
fantastic video 👍💪
@DLHFarms
2 жыл бұрын
Thanks!
@GurjitSingh-tb1lm Жыл бұрын
Good working
@jamesmorrison18843 жыл бұрын
Hello Dennis this is one thing I've never done running a excavator backhoe bulldozer, oh wait I've run bulldozer at the snow dump and some on the other machines. I'm thinking when will the day be that you sit at home and run them from the computer, I'm sure it's coming. Have a good day.
@DLHFarms
3 жыл бұрын
It would be hard to do a good job from the computer but it could probably be done.
@johnshelley2822 жыл бұрын
Must be nice working in the best town on Earth!
@DLHFarms
2 жыл бұрын
Haha
@JerichoRally Жыл бұрын
Man, this was so helpful in understanding a lot of concepts that I had been missing. Thank you!!!! Question: where do the elevation measurements come from? Are they based off of sea level? Or some random, or official, benchmark somewhere?
@DLHFarms
Жыл бұрын
Job benchmark.
@warrenpatton51383 жыл бұрын
Hello from Bristol. hey Dennis, how's it goin ? ya know , i believe you could part my hair and not scratch my head with the excavator. slick as can be. i continue to watch and enjoy every video ya put up. Especially enjoyed the ford gate. lol see ya own the next one . later warren
@DLHFarms
3 жыл бұрын
👍👍 haha come by sometime I’ll comb your hair with the excavator.
@warrenpatton5138
3 жыл бұрын
It’s a deal. Wife and I have talked about heading your way sometime. I’ll be sure to holler before we do. Warren.
@otakusenpai37378 ай бұрын
They r doing it at my area but they didnt put any gravel below the pipes.... they put the concrete pipes directly on the soil
@GurjitSingh-tb1lm Жыл бұрын
I'm only Road work and pipeline project working
@GurjitSingh-tb1lm Жыл бұрын
Your only pipeline project working
@regsparkes65073 жыл бұрын
Would you rather have a grading bucket for jobs like this Dennis, or is the excavating bucket OK? I'm thinking, of course, for the pipe laying etc. would it be easier to have smooth cutting edge?
@DLHFarms
3 жыл бұрын
For digging the ditch the tooth bucket is best but it would be nice to have a smooth edge just to finish the bottom up.
@regsparkes6507
3 жыл бұрын
@@DLHFarms Yes, I agree,.. you need two buckets! :)
@GurjitSingh-tb1lm Жыл бұрын
Good
@jeff77642 жыл бұрын
A lot easier to just set the manhole using the laser, then shoot your inverts and whatnot. I guess everyone does it it different tho
@DLHFarms
2 жыл бұрын
The gps is shooting grades anywhere you set it
@Freecan673 жыл бұрын
So how deep do you dig for sewer? Up in Eastern Ontario we go 6 to 8 feet for Sewer. Because of Old Man Frost!!!
@DLHFarms
3 жыл бұрын
Your safe to bury anything here 3ft deep it won’t freeze.
@seana3ddig3383 жыл бұрын
I wonder do they line those manholes After you install them or not sewer gas is terrible on concrete coming from a forced-main. And again great videos
@DLHFarms
3 жыл бұрын
No liner but we do have to vacuum test them to make sure they don’t leak.
@dlogan3004
2 жыл бұрын
I done a big 350 lot phase on a subdivision in Pensacola Fl about 2 years ago and after all the runs had been air tested and the manholes vacuum tested the city came out and lined all the manholes. Which was weird because they were prelined with some kind of pink sealant.
@evandickens39172 жыл бұрын
What's your opinion of someone having cattle (around 150 head) and also doing some excavation/utility work? Do you believe it's possible (and smart) to do both? I'm 18 so my plan is to spend 10 years or so out working in wildland fire then in the off-season work running a snow plow for additional income so I can save enough to buy land either our right or the majority down which would help financially being first Generation ag. Part of what's drawing me to excavation/utility work is I would already have a ctl on farm so I would be able to pay for it with the income it would make in excavation. Hopefully that made sense I'm looking for advice and im not asking you to sugar coat your opinion. Thank you and have a great day
@DLHFarms
2 жыл бұрын
I think your on the right track. Be versatile do whatever makes ends meet. You can definitely run cows and excavate if you have the drive to work.
@almyers80743 жыл бұрын
Good morning Dennis! Am I correct in thinking this is the Vtech location? Thanks for letting me tag along.
@DLHFarms
3 жыл бұрын
Yes
@CGuzmanSafety9 ай бұрын
Just a question. The invert in the pipe connection "IN" is it lower than the one going "out"?
@DLHFarms
9 ай бұрын
No
@jshan82053 жыл бұрын
Why did you subtract? Your rover is set on the flow line right? You add to go deeper. i shot a hub earlier my shot was 2.45. My cut was 14.60. I put .33 of bedding under it. From the bottom of my manhole base to where my pipe was gonna rest was 9 inches which is .75. Iadded that all up got my dirt grade then subtracted. 33 and put in my sand. Can you please explain why you subtracted? We don't use a rover or gps. I just shoot set lay to the next.
@DLHFarms
3 жыл бұрын
It’s opposite when using gps because your not using a grade rod.
@jshan8205
3 жыл бұрын
@@DLHFarms i get that but the bottom of your rover is still similar to a grade rod. It's reading that grade. We dont use gps. We do everything old school.
@GurjitSingh-tb1lm Жыл бұрын
I'm only Road work and pipeline project working Dubai country five years working
@g.prince62655 ай бұрын
That quick change bucket option is sweet just don't drop that bucket on my pipemans head,how do i explain that to the boss?😂🤘
@DLHFarms
5 ай бұрын
Yeah it has a couple safety features to keep that from happening
@g.prince6265
5 ай бұрын
@@DLHFarms I'm sure buddy just like joking with other pipe crews.you boys keep slamming that good pipe in the ground and I will as well👍
@bjenkins8033 жыл бұрын
I can't believe you aren't using a manual transit with a stick rule and a plumb bob. Maybe a string lime and chalk too lol.
@DLHFarms
3 жыл бұрын
Haha nope that’s old school.
@bjenkins803
3 жыл бұрын
@@DLHFarms Very old school! Most people nowadays would be lost trying to use that stuff.
@GurjitSingh-tb1lm Жыл бұрын
I'm only back to India
@daniela.83193 жыл бұрын
Where are you working at in Blacksburg
@DLHFarms
3 жыл бұрын
Research Center
@Jacob_64202 жыл бұрын
In my neck of the woods, was this on campus or corporate research? Can't tell from background lol
@DLHFarms
2 жыл бұрын
Corporate Research, near the airport.
@Jacob_6420
2 жыл бұрын
@@DLHFarms yes sir I pumped the slabs for that job lol. I thought it was that job just couldn't tell for sure
@AlanMolstad2 жыл бұрын
How do you keep the manhole from being crooked?
@DLHFarms
2 жыл бұрын
We use a level.
@dlogan3004
2 жыл бұрын
@@DLHFarms The way I was taught years ago was once you got to the manhole measure the thickness of the bottom of the manhole and add that measurement to you shovel grade and make a mark. Line up with the stake for the front of the manhole and have the hoe man cut down till you hit that new mark on your shovel then level off that grade for whatever the size of the manhole. It keeps you from having to do the math and shoot in a hub for center of the manhole
@GurjitSingh-tb1lm Жыл бұрын
My country India and my sata only Punjab bro
@alexbyrne65703 жыл бұрын
Dennis Harrell Do you like construction?
@DLHFarms
3 жыл бұрын
Yes
@GurjitSingh-tb1lm Жыл бұрын
I'm only too much working Dubai country five years working Dubai
@GurjitSingh-tb1lm Жыл бұрын
I'm only hard work Dubai
@undermyguns75092 жыл бұрын
I thought you come out of a manhole with Bells facing away from manhole
@DLHFarms
2 жыл бұрын
No always put the bells up the hill think of the pipe as a funnel. Water alway needs to go into the bell end and out the spigot end on any gravity system. On pressure systems like water lines it’s not a big deal.
@GurjitSingh-tb1lm Жыл бұрын
Your country me work visa open
@tomcander36692 жыл бұрын
All he had to do was pull excess to the end for .08'
@GurjitSingh-tb1lm Жыл бұрын
Please sir send me Visa
@GurjitSingh-tb1lm Жыл бұрын
My comeny is name Taishter torpont engineering Dubai
@GurjitSingh-tb1lm Жыл бұрын
Your country name Europe
@paulc55852 жыл бұрын
Not going very deep, the inverts must be crazy
@DLHFarms
2 жыл бұрын
We had to put about 8 more feet of fill in this area.
@accomack1003 жыл бұрын
Too bad that you don't have a robot to put the pipe in the ground!!!!
@DLHFarms
3 жыл бұрын
Haha
@GurjitSingh-tb1lm Жыл бұрын
Your country New open Visa yes and no send message me back bro
@undermyguns75092 жыл бұрын
Don’t you set the manhole first
@DLHFarms
2 жыл бұрын
Not if you don’t have enough room to get the pipe in and belled up and you normally don’t on sewer. You have to set the manhole measure for pipe move manhole, bell up pipe then position man hole.
@undermyguns7509
2 жыл бұрын
@@DLHFarms we set manhole and put the laser in trough with grade but I guess it’s different everywhere
Пікірлер: 108
I'm a civil design engineer. I'm young in the game and have only been practicing for a year and half. This video was very informative for the construction process to see it in person rather than just the plans. Thanks man.
@DLHFarms
Жыл бұрын
Awesome!
Been watching your haying videos for years and found this really neat. My day job is working at a waste water plant and i frequently jet spray our sewer lines so its neat to see how they are installed. Thanks!
It's really enjoyable to watch an experienced operator run heavy equipment. It's amazing how precise you can get things in commercial construction with gigantic pieces of equipment, and people don't realize just exactly how difficult that is to do. I remember when I was talking to your dad about The screened topsoil he was telling me he was working in Blacksburg on a large job.
@DLHFarms
2 жыл бұрын
Thanks Troy!
Modern technology sure helps you on this job, Thanks for sharing Dennis 👍
@DLHFarms
3 жыл бұрын
That’s for sure
Nice video. Just did my first day as a helper for a company this for a gigantic retirement community, such a massive scale.
I laid pipe in the late 80s. It seemed like everyday I'd hear, put lots of soap on it we don't want to roll a gasket.
@DLHFarms
3 жыл бұрын
Yep heard that several thousand times haha
I always enjoy your construction videos! Nice to see how it’s done in different areas.
@DLHFarms
3 жыл бұрын
👍 thanks
Enjoyed seeing how you do this work. Thanks
@DLHFarms
3 жыл бұрын
Thanks!
That was just great to watch. Loved it. 👍🙂
@DLHFarms
3 жыл бұрын
Awesome!
Great 👍 videos like how you explain GPS for us older string line operators
@DLHFarms
3 жыл бұрын
👍
Awesome Video! keep us up to date!
@DLHFarms
3 жыл бұрын
👍
Learned a lot, thanks for sharing your knowledge.
@DLHFarms
3 жыл бұрын
👍
Nice job. Thanks for doing a video.
I think your videos are the best I used to do a lot of pipe work and I would lining up my Laserbeam with a plumbob none of that all transit needed people spend a hour setting that stuff up I get 400 feet long gravity sewer maybe a 10th off left and right The team I had we could get out of a 16 foot manhole on a 400 foot run in 20 minutes with the trench box On grading and online we could get two runs a day no problem
@jshan8205
3 жыл бұрын
Could you explain how you set it up and lined it up with a plumb bob?
Team effort makes it look easy...
That pipe laser is amazing! The only thing allowed to be crooked are curly fries!
@DLHFarms
3 жыл бұрын
Haha
@coleslaw2394
2 жыл бұрын
And politicians
Nice job, I think you ve done this once or twice before, LOL. It s a lot of work getting the grade set. Thanks from Georgian Bay.
@DLHFarms
3 жыл бұрын
Yeah I’ve done quite a bit of it.
Thanks for sharing Dennis. Thank god for gps.
@DLHFarms
3 жыл бұрын
Absolutely!
Job well done brother
@DLHFarms
3 ай бұрын
Thanks
fantastic video 👍💪
@DLHFarms
2 жыл бұрын
Thanks!
Good working
Hello Dennis this is one thing I've never done running a excavator backhoe bulldozer, oh wait I've run bulldozer at the snow dump and some on the other machines. I'm thinking when will the day be that you sit at home and run them from the computer, I'm sure it's coming. Have a good day.
@DLHFarms
3 жыл бұрын
It would be hard to do a good job from the computer but it could probably be done.
Must be nice working in the best town on Earth!
@DLHFarms
2 жыл бұрын
Haha
Man, this was so helpful in understanding a lot of concepts that I had been missing. Thank you!!!! Question: where do the elevation measurements come from? Are they based off of sea level? Or some random, or official, benchmark somewhere?
@DLHFarms
Жыл бұрын
Job benchmark.
Hello from Bristol. hey Dennis, how's it goin ? ya know , i believe you could part my hair and not scratch my head with the excavator. slick as can be. i continue to watch and enjoy every video ya put up. Especially enjoyed the ford gate. lol see ya own the next one . later warren
@DLHFarms
3 жыл бұрын
👍👍 haha come by sometime I’ll comb your hair with the excavator.
@warrenpatton5138
3 жыл бұрын
It’s a deal. Wife and I have talked about heading your way sometime. I’ll be sure to holler before we do. Warren.
They r doing it at my area but they didnt put any gravel below the pipes.... they put the concrete pipes directly on the soil
I'm only Road work and pipeline project working
Your only pipeline project working
Would you rather have a grading bucket for jobs like this Dennis, or is the excavating bucket OK? I'm thinking, of course, for the pipe laying etc. would it be easier to have smooth cutting edge?
@DLHFarms
3 жыл бұрын
For digging the ditch the tooth bucket is best but it would be nice to have a smooth edge just to finish the bottom up.
@regsparkes6507
3 жыл бұрын
@@DLHFarms Yes, I agree,.. you need two buckets! :)
Good
A lot easier to just set the manhole using the laser, then shoot your inverts and whatnot. I guess everyone does it it different tho
@DLHFarms
2 жыл бұрын
The gps is shooting grades anywhere you set it
So how deep do you dig for sewer? Up in Eastern Ontario we go 6 to 8 feet for Sewer. Because of Old Man Frost!!!
@DLHFarms
3 жыл бұрын
Your safe to bury anything here 3ft deep it won’t freeze.
I wonder do they line those manholes After you install them or not sewer gas is terrible on concrete coming from a forced-main. And again great videos
@DLHFarms
3 жыл бұрын
No liner but we do have to vacuum test them to make sure they don’t leak.
@dlogan3004
2 жыл бұрын
I done a big 350 lot phase on a subdivision in Pensacola Fl about 2 years ago and after all the runs had been air tested and the manholes vacuum tested the city came out and lined all the manholes. Which was weird because they were prelined with some kind of pink sealant.
What's your opinion of someone having cattle (around 150 head) and also doing some excavation/utility work? Do you believe it's possible (and smart) to do both? I'm 18 so my plan is to spend 10 years or so out working in wildland fire then in the off-season work running a snow plow for additional income so I can save enough to buy land either our right or the majority down which would help financially being first Generation ag. Part of what's drawing me to excavation/utility work is I would already have a ctl on farm so I would be able to pay for it with the income it would make in excavation. Hopefully that made sense I'm looking for advice and im not asking you to sugar coat your opinion. Thank you and have a great day
@DLHFarms
2 жыл бұрын
I think your on the right track. Be versatile do whatever makes ends meet. You can definitely run cows and excavate if you have the drive to work.
Good morning Dennis! Am I correct in thinking this is the Vtech location? Thanks for letting me tag along.
@DLHFarms
3 жыл бұрын
Yes
Just a question. The invert in the pipe connection "IN" is it lower than the one going "out"?
@DLHFarms
9 ай бұрын
No
Why did you subtract? Your rover is set on the flow line right? You add to go deeper. i shot a hub earlier my shot was 2.45. My cut was 14.60. I put .33 of bedding under it. From the bottom of my manhole base to where my pipe was gonna rest was 9 inches which is .75. Iadded that all up got my dirt grade then subtracted. 33 and put in my sand. Can you please explain why you subtracted? We don't use a rover or gps. I just shoot set lay to the next.
@DLHFarms
3 жыл бұрын
It’s opposite when using gps because your not using a grade rod.
@jshan8205
3 жыл бұрын
@@DLHFarms i get that but the bottom of your rover is still similar to a grade rod. It's reading that grade. We dont use gps. We do everything old school.
I'm only Road work and pipeline project working Dubai country five years working
That quick change bucket option is sweet just don't drop that bucket on my pipemans head,how do i explain that to the boss?😂🤘
@DLHFarms
5 ай бұрын
Yeah it has a couple safety features to keep that from happening
@g.prince6265
5 ай бұрын
@@DLHFarms I'm sure buddy just like joking with other pipe crews.you boys keep slamming that good pipe in the ground and I will as well👍
I can't believe you aren't using a manual transit with a stick rule and a plumb bob. Maybe a string lime and chalk too lol.
@DLHFarms
3 жыл бұрын
Haha nope that’s old school.
@bjenkins803
3 жыл бұрын
@@DLHFarms Very old school! Most people nowadays would be lost trying to use that stuff.
I'm only back to India
Where are you working at in Blacksburg
@DLHFarms
3 жыл бұрын
Research Center
In my neck of the woods, was this on campus or corporate research? Can't tell from background lol
@DLHFarms
2 жыл бұрын
Corporate Research, near the airport.
@Jacob_6420
2 жыл бұрын
@@DLHFarms yes sir I pumped the slabs for that job lol. I thought it was that job just couldn't tell for sure
How do you keep the manhole from being crooked?
@DLHFarms
2 жыл бұрын
We use a level.
@dlogan3004
2 жыл бұрын
@@DLHFarms The way I was taught years ago was once you got to the manhole measure the thickness of the bottom of the manhole and add that measurement to you shovel grade and make a mark. Line up with the stake for the front of the manhole and have the hoe man cut down till you hit that new mark on your shovel then level off that grade for whatever the size of the manhole. It keeps you from having to do the math and shoot in a hub for center of the manhole
My country India and my sata only Punjab bro
Dennis Harrell Do you like construction?
@DLHFarms
3 жыл бұрын
Yes
I'm only too much working Dubai country five years working Dubai
I'm only hard work Dubai
I thought you come out of a manhole with Bells facing away from manhole
@DLHFarms
2 жыл бұрын
No always put the bells up the hill think of the pipe as a funnel. Water alway needs to go into the bell end and out the spigot end on any gravity system. On pressure systems like water lines it’s not a big deal.
Your country me work visa open
All he had to do was pull excess to the end for .08'
Please sir send me Visa
My comeny is name Taishter torpont engineering Dubai
Your country name Europe
Not going very deep, the inverts must be crazy
@DLHFarms
2 жыл бұрын
We had to put about 8 more feet of fill in this area.
Too bad that you don't have a robot to put the pipe in the ground!!!!
@DLHFarms
3 жыл бұрын
Haha
Your country New open Visa yes and no send message me back bro
Don’t you set the manhole first
@DLHFarms
2 жыл бұрын
Not if you don’t have enough room to get the pipe in and belled up and you normally don’t on sewer. You have to set the manhole measure for pipe move manhole, bell up pipe then position man hole.
@undermyguns7509
2 жыл бұрын
@@DLHFarms we set manhole and put the laser in trough with grade but I guess it’s different everywhere