Installing satellite cable to a satellite dish. F type compression and screw connectors. Clipping the cable to the wall. Drilling a hole through a cavity wall.
Жүктеу.....
Пікірлер: 22
@celsolpereira40972 ай бұрын
no grounding? You supposed to ground the cables running alongside the wall, before terminating it to your satellite receiver.
@sonareclipse98102 жыл бұрын
Thanks pal. Going to attempt this tomorrow 👍
@deanjallen6449
2 жыл бұрын
Thanks for the comment, good luck
@Nyle959 ай бұрын
How would you accurately know where thr drill will be coming through on the inside?
@spacemanwho Жыл бұрын
Thanks for the vid. really helpfull.
@deanjallen6449
Жыл бұрын
Many thanks for the comments, Regards
@hvanstraaten7510 Жыл бұрын
would a new installation (an air heat pump system) installed near the satellite , interfere with the satellite signal ? hubby seems to think so ?
@L1RW
Жыл бұрын
No, satellite is from space. It doesn’t get any interference at all. The only problems could be that your dish isn’t aligned correctly or the skew of your LNB is not correct (for the satellite channels you are wishing to view).
@BRIANCATTIGAN2 жыл бұрын
Im going to be attempting to move ours tomorrow. Disconnecting from the dish for sky. Do i need to isolate any power etc?
@deanjallen6449
2 жыл бұрын
Hi there, either turn off the power to the sky box or undo from sky box first. This way you cant go wrong. regards Dean
@raybob492 жыл бұрын
Your cut n' crimp tool looks effective, could I ask what sort/where to get? Thank you.
@deanjallen6449
2 жыл бұрын
Hi there, thanks for the question. Both tools are excellent. Magnussion wire strippers, Screwfix 5175V £15. Presch cable cutters came from Amazon and were £11, should be able to find them typing Presch, hope this helps, regards
@L1RW
Жыл бұрын
I would recommend a Televes Cable Stripper. It’s what the trade use and I found it to be superb.
@dgma626 Жыл бұрын
Hi I was wondering if you could help me. I replaced rusty f connectors on coaxial cables running from the satellite quad lnb. Now I have a strange problem I can't figure out I put all everything back as it was before I touched it but now one of the rooms loses the connection when a satellite box is turned off in the other rooms and it only works if a box is turned on in another room Thanks
@deanjallen6449
Жыл бұрын
Hi there, sorry you are having issues. This sounds like a very strange one. I have 2 cables going direct to my TV. Another 2 cables going to a freeview box. Both these items are not linked in any way and both work as intended. It almost sounds like a cable earthing issue. I would double check the connections on all cables first. Sorry I havent been much help. Regards
@stewartmann2202 Жыл бұрын
I have 2 Freesat boxes does it matter in which order I connect wires to lnb?
@deanjallen6449
Жыл бұрын
Hi there, from my understanding it does not matter. On my cable there were two wires per cable so it made sense to keep these together if you know what I mean. Regards
@dthdishtechmdismaaildthdoc65602 жыл бұрын
Nice 51 like 👍
@deanjallen6449
2 жыл бұрын
Thank you 👍
@navdeepsingh-pk5qk Жыл бұрын
You seem wise
@deanjallen6449
Жыл бұрын
Many thanks for the feedback and support
@navdeepsingh-pk5qk
Жыл бұрын
@@deanjallen6449 👍 welcome,I like People with technical skill
Пікірлер: 22
no grounding? You supposed to ground the cables running alongside the wall, before terminating it to your satellite receiver.
Thanks pal. Going to attempt this tomorrow 👍
@deanjallen6449
2 жыл бұрын
Thanks for the comment, good luck
How would you accurately know where thr drill will be coming through on the inside?
Thanks for the vid. really helpfull.
@deanjallen6449
Жыл бұрын
Many thanks for the comments, Regards
would a new installation (an air heat pump system) installed near the satellite , interfere with the satellite signal ? hubby seems to think so ?
@L1RW
Жыл бұрын
No, satellite is from space. It doesn’t get any interference at all. The only problems could be that your dish isn’t aligned correctly or the skew of your LNB is not correct (for the satellite channels you are wishing to view).
Im going to be attempting to move ours tomorrow. Disconnecting from the dish for sky. Do i need to isolate any power etc?
@deanjallen6449
2 жыл бұрын
Hi there, either turn off the power to the sky box or undo from sky box first. This way you cant go wrong. regards Dean
Your cut n' crimp tool looks effective, could I ask what sort/where to get? Thank you.
@deanjallen6449
2 жыл бұрын
Hi there, thanks for the question. Both tools are excellent. Magnussion wire strippers, Screwfix 5175V £15. Presch cable cutters came from Amazon and were £11, should be able to find them typing Presch, hope this helps, regards
@L1RW
Жыл бұрын
I would recommend a Televes Cable Stripper. It’s what the trade use and I found it to be superb.
Hi I was wondering if you could help me. I replaced rusty f connectors on coaxial cables running from the satellite quad lnb. Now I have a strange problem I can't figure out I put all everything back as it was before I touched it but now one of the rooms loses the connection when a satellite box is turned off in the other rooms and it only works if a box is turned on in another room Thanks
@deanjallen6449
Жыл бұрын
Hi there, sorry you are having issues. This sounds like a very strange one. I have 2 cables going direct to my TV. Another 2 cables going to a freeview box. Both these items are not linked in any way and both work as intended. It almost sounds like a cable earthing issue. I would double check the connections on all cables first. Sorry I havent been much help. Regards
I have 2 Freesat boxes does it matter in which order I connect wires to lnb?
@deanjallen6449
Жыл бұрын
Hi there, from my understanding it does not matter. On my cable there were two wires per cable so it made sense to keep these together if you know what I mean. Regards
Nice 51 like 👍
@deanjallen6449
2 жыл бұрын
Thank you 👍
You seem wise
@deanjallen6449
Жыл бұрын
Many thanks for the feedback and support
@navdeepsingh-pk5qk
Жыл бұрын
@@deanjallen6449 👍 welcome,I like People with technical skill