you just showed how professional you are in doing things the right way. thanks for sharing your expertise.......

Thanks for the tip - very helpful

Very nice install........Thanks for posting!

They're really good value those little preamps. You can get them for as little as $10 on eBay. Dog knows where they came from originally.

This is a better way to go about installing this.

woah thats alot of work im so lucky my guitar came with a pickup built in

Nice bro

It can effect the sound of guiter

good

I want to do this so bad to my guitar too

Nice work. Can you upload a video with and without amplifier to listen the diference?

? I'm going to be installing one of these, does the pickup change the string hight when reinstalling the bridge

I see alot of people buying this preamp... must be a good sign. Im ordering two for both my acoustics :)

@TOMOPRATAMA

8 жыл бұрын

what is the merk of that preamp? where buy it from? and how price it? thanks before..

@Sciptopia

5 жыл бұрын

@@TOMOPRATAMA AliExpress

I want some help here ! You didnt installed a mic right ? How does that work out? and Whats the difference between a normal pickup and a piezo pickup?

@fulzorhd9450

7 жыл бұрын

There's no "normal pickup". This one works with a piezo sensor under the saddle, which is linked to the preamp (battery). You may use magnetic mics (such as electric guitar ones) but also condenser mics. The difference between the three is that the piezo transforms the vibrations of the instrument into electric signal, the magnetic ones convert vibrations of the strings in electric signals thanks to magnets and finally condenser mics catch the sound like the ones you use to sing or make podcats for example ;)

Cuales son las medidas de largo y ancho de este ecualizador

I have installed a LC-5 4 Bands EQ Equalizer Acoustic Guitar Preamp Tuner Piezo Ceramic Pick-up and was wondering will the 5 band fit into the same cutout ??

Установка эквалайзера с mp3 kzread.info/dash/bejne/p6N3tKyFqLuqZZc.html

How is the pickup when plugged in for you? The only reason why I ask is I got a guitar that uses that brand and it is very tinny when it comes to the tone(a lot of high frequencies bleed through) and it seems like it’s working way too hard (I had to change batteries all the time.). I don’t know if it’s just the one I have installed is defective or if I just got a bad brand in there altogether.

Como funciona el ecualizador?.yo instalé uno marca cherub mod.GS-3,y el afinador muy bien pero cuando quiero ecualizar no varia nada y la pantalla no hace nada.busco manuales pero estan en ingles y yo necesito en español

do you have a microphone with pre amp

Zabardast cheers from Toronto. Where exactly to place this inside the guitar as the one in my Yamaha APTX2, 3/4 guitar dropped in. It is about 1 inches in diameter and has glue on one side? Not like the one you are using.

Dear sir I have fixed the piezo pickup to the normal Screw holes of bridge... but grouding sound is heard. Should we do separate hole on the bridge In order to fix the piezo pickup? Kindly help me....

how to make a balance voice in acoustic-electric guitar? ,,i have a problem with my guitar,, my 3rd string is not loud as the other strings,, is it mean that my piezo pick up in problem?.. i realy need your answer, thank you bro..

@fulzorhd9450

7 жыл бұрын

Check if the contact between the saddle and the piezo sensor right under in the area of your string

@x34668

6 жыл бұрын

choose the best mark of strings

Does this device works using nylon chords ???

WARNING if you are going to do this remember to cut the hole on the side of the guitar that faces up I just cut the hole on mine as if I was a lefty. very happy that paid just £6 for it it will still just be a bit odd.

thanks for sharing... does the pre amp and saddle pickups come as a set together.. I am looking out for preamp and pickup for my guitar .. can u suggest some best... I require a reverb and chorus option.

You should have mentioned the mistakes you did, like those huge corner holes for the saw.

@x34668

6 жыл бұрын

haw can he saw that hell without so ???

@emersonsrandomvideos248

5 жыл бұрын

My point exactly. He over do the holes at the corners.

2:30 Don't put a hole in the guitar daddy :P

Nice work, can i repost on my instagram?

What is the name of this pickup?

Looks like the string height would be raised using that device on the bridge , why do you need that? Can't this be installed without that right under the original saddle.

Это дешевый китайский пезодатчик, или он какой то известной фирмы, и как звучит? Думаю покупать такой, но сомневаюсь в качестве.

@x34668

6 жыл бұрын

Roman Degtyar il y a 2 ans C'est un piézo-capteur chinois pas cher, ou c'est une sorte d'entreprise célèbre, et comment ça sonne? Je pense acheter ça, mais je doute de la qualité.

How do you connect the piezo to the equaliser

@Sciptopia

5 жыл бұрын

There's a 3.5mm Jack at the bottom of the equalizer that you plug the piezo into. Very simple

Is this high quality?

I jinstalled the identical preamp unit...some difficulty but ok...works perfectly but clue me in on the xlr jack..seems useless

@AdrianBranchSEO

4 жыл бұрын

The unit also has a mic picup apparently, so the XLR is for that.

what type is it and where did you buy it

Uzman Riaz's music?

What is that song you're playing? You're performance is great.

@Scratchy8644

9 жыл бұрын

Ray Those songs are from Mike Dawes, not him

@MrNonaste

9 жыл бұрын

***** Well then Mike Dawes is one helluva guitarist.

@fisheatsyourhead

8 жыл бұрын

Mike Dawes - Somebody that I used to know cover Mike Dawes - The Impossible

first of all my friend ...you don't drill holes or use a jigsaw....you tape the area with green painters tape , mark your dimensions , cut with exacto knife or sheetrock knife with new blade (FOLLOW LINES ) don't use to much pressure PASS OVER LINE UNTIL YOU ARE TROUGH be carefull at the end be gentle ..remove tape a little sanding to make the edges clean and have a snug fit.

Why use a sabre saw it is a much cleaner install using a cutting wheel fitted to a multi-speed dremel tool. Another I understand for the sake of time you did things quickly, I would suggest if you do this on other folks "baby's" you take time and extreme care. A little time used saves buying a client a new Guitar cause you crapped up the finish cause you refused to take your time.

what music is the video,who play it???

@abdo123921

5 жыл бұрын

Goty Somebody i used to know fingerstyle

@012345678935564

5 жыл бұрын

thanks you very nuch,friends

how much do the pickups cost can some one tell me??

@MrKontros

7 жыл бұрын

~15€/$ on amazon

@SalvvOrtiz

7 жыл бұрын

$39.95 at GFS the whole the kit.

7:24 how is that metal thing called?

@syedskhalid

5 жыл бұрын

Bridge?

Что мешало сделать отверстия в центре, и уже оттуда выпиливать прямоугольник?))

Wats the price

@soretuber847

6 жыл бұрын

Whole thing can cost somewhat ₹1300 - ₹1400

Whats the name of that song playing dammm

@Kxng_melody

4 жыл бұрын

First music tho

@Kxng_melody

4 жыл бұрын

Also the last one

A drill? Try a dremel brah..

the lousy non-musical repeating riff is annoying.