You need to check your Turn signal wire connection to the headlight Pigtail connector. Alot of the time, when you forcibly disconnect the headlight connectors, if you pull too hard or pull incorrectly, you will actually snap wires or damage wires. You have to recheck them especially since you have DRLs and tapped into the turn signal wire. Also check ground wire connection. Hope this helps

Im glad i got a xse v6 the new camry just doesnt look good glad i got this generation. Want to get those leds

@MambaSS

5 ай бұрын

The headlights look sweet but honestly they are way too expensive for what you get.

Awesome headlights

@MambaSS

5 ай бұрын

Thanks!!

Where did you get the DRL/Foglamp lights for the front bumper for a '20 SE? Im only seeing '21+

@MambaSS

6 ай бұрын

You can find them on eBay and Amazon, the quality is hit or miss

What wire stripping tool were you useing?

can you show how to wire the fog light drl to the headlights drl as well ? I have the OEM from toyota and it wouldn't function with my triple beam, either the check light is on or the fog light is on with the actual headlights ( 6 bulbs from both lights ) instead of the check mark

@MambaSS

6 ай бұрын

Yeah absolutely, I’m fixing to get another set of running lights so I’ll definitely do a video on it!

@haii1650

6 ай бұрын

@@MambaSS appreciate you, i've look around and no videos or no one know how to fix this :( waiting for your vids man thank you!

What fuse did you tap into?

I just installed the triple beam on my 24 trd. Took off the bumper 3 times to bc i put it back on wrong 3 times. Anyways, now i have the dreaded "!" With a triangle. The add a fuse was bulky and rugged.i don't know if i put it in the right spot. Found people with same issue but no solotion. Damn i just wished they worked with no issue.

@ryanware2183

4 ай бұрын

Also I did not adjust the beam Hights and are a little off level and seemingly low. Had to go to work. But everything does work just not flawlessly with the "!"

@MambaSS

3 ай бұрын

Yeah I’ve been rocking these lights for a while now and not sure I’m going keep them. We’ll see. They seems to have their fair share of problems considering how pricey they are.

@ryanware2183

3 ай бұрын

@@MambaSS since I've never installed, I figured it was my error but since it's 2024 or whatever the system is reading something other than OEM. Today is the last day to return. I considered just having them send a different set, but im pretty sure ill get the same results. Damn they look good tho.

I got the rear taillights from TT-ABC, which is UQZ from eBay, and after about a week, the lights randomly turn to blue when they go on, once it gets dark outside. They were responding to me during the 30-day return window, but now, they ignore me. I wrote to them on eBay but haven't received a response. One guy on KZread warned me about TT-ABC, but you know how it is. I thought maybe they just want to mess up their business. They were right about them.

@MambaSS

7 ай бұрын

Yeah so far not a good experience, they look sweet but I need the to work, we’ll see what happens 🤷🏽‍♂️

@LuV2SPDup

3 ай бұрын

​@@MambaSS, I still didn't buy the lights 😂😂. Have you fixed the issue?

These headlights make the camry more aesthethic but i was really hoping youd cover its functionality as well. How are the projection beams? Are they brighter? Are the lines straight or angled? Are they sharper? I hate the stock led cutoffs bc they are angled so terribly and it doesnt allow them to be horizontally adjusted. Any chance you can show us the projection?

@MambaSS

2 ай бұрын

They are triple beam projectors I believe, they are definitely brighter but nothing crazy bright. Lines are a bit angled, and lighting has way better definition (sharper). I’ll probably do an update on the lights here soon.

@jxiong053

2 ай бұрын

Thanks. I wish we had the option for adjusting the horizontal angle like the older camrys.

Did unplugging the radar system cause any warning lights? I plan on swapping out my headlights on my 2020 se hybrid

@MambaSS

27 күн бұрын

@@dygardion9130 nah, as long as you plug everything back in your fine

With the headlights on Looks fr good enough they should’ve came from factory

@MambaSS

6 ай бұрын

I think so too, the Camry has really good styling but the factory headlights aren’t very complimenting of the car

Bro what percent of tint you have on the windows? By the way the car looks 🔥

@MambaSS

2 ай бұрын

I’ve got 5% all the way around with 35% on the windshield

Man those are Lexus themed lights

@MambaSS

5 ай бұрын

What an astute observation 😂

Are the headlights still giving you problems/ If not how did you fix it?

@MambaSS

Ай бұрын

It’s intermittent, I haven’t had time to dig into it but it is still happening. I’ll probably take a look once I finish my other build.

I really like the wheel setup what size and offset are these? And you said you were on lowering springs?

@MambaSS

6 ай бұрын

Thanks! It’s actually a super simple set up. They are just Tesla model 3 wheels (Aero wheels, you can get them pretty cheap) and then I got some 5mm spacers to make them sit pretty much perfect. And the springs are Eibach pro springs, makes for the perfect drop and I don’t scrape on ANYTHING!

@sethmacias8703

6 ай бұрын

Nice the aero wheels are the 18” inch of course? Thats definitely something my girl needs to give her Camry some low without worrying about her scraping everything 👍

@MambaSS

6 ай бұрын

@@sethmacias8703 yeah they are 18x8.5, so they are a half inch wider than the stock wheels and they’re actually a lot lighter too, for me it’s been the perfect set up!

@junballs6576

4 ай бұрын

For your drop springs. Did you add any camber or tow kit or yours been riding fine without it? Also are you on factory struts? I wanted to go a simple route. I only did a 5% tint on my 2020 camry & Upgraded sound system. Then probably just go on springs on stock tires.

How bright are they compared to oem?

@MambaSS

2 ай бұрын

Definitely brighter but not a crazy amount

what wheels are those and specs?

@MambaSS

6 ай бұрын

It’s super simple set up actually. The wheels are Tesla Model 3 Aero wheels (can find them pretty cheap on Facebook) and then just 5mm spacers for the sake of making it a bit more flush.

What wheels are those they look good

@MambaSS

Ай бұрын

Believe it or not they are just Tesla model 3 wheels. I really likes the spoke style and they are about 10lbs lighter per wheel.

I like better the original lights i heard the lexus type headlights have problems with water 💧 getting inside

@MambaSS

7 ай бұрын

Most aftermarket headlights have that problem, the trick is to run a bead of silicon around the seams

@BlueDroneBlues

6 ай бұрын

On my 1st set I had freaking hair inside my new headlight assembly's. You could tell it was from the glue on the covers they used to keep things out didn't do a good job and the glue vapors stuck to the inside of the headlight assembly.

First!

bro driving a baby is250 i love it i want the camry size but the lexus look just need 399.99 lmaooo the tail lights go crazy as well hirev sports got the best aftermarket parts

Inferior Chinese parts are never recommended over factory parts. Those lamps will definitely fail in a short time

@MambaSS

6 ай бұрын

At this point, I wouldn’t be surprised.

Just go buy and XSE, comes with standard led lights, sport tuned suspension, pano roof, 19th inch glossy wheels and JBL sounds. Lot cheaper doing these dumb mods

I went through a couple different sets of non factory head lights. Even though they look better especially the 2nd set. They just all perform like crap when you drive down the road. A bulb burns out and I had to take of the whole bumper and take out the head light assembly to get a new bulb in place. Absolutely ridiculous! Just don't do the job I need it to as did the factory set. Recently I installed the factory set and have had no issues sense. I just plan to polish them once a year and wax them every few months to help keep them from getting sun damage. The 1st set was total crap. On both sets I did have areas driving down the road that just had these goofy dark spots and neither did a very good job. Factory may not look the best on the outside, but they are the best for doing the job headlights need to do. Also, taking the bumper off and getting everything on right is a pain in the ass. On my 16 Toyota Camry Hybrid there are literally plastic screws in the wheel bay and they are at least $10 bucks a piece and they never ever come out right if you have to take the bumper off for any reason like having to replace headlights because my 2nd set although it looked good, there was no fucking way to replace a burned bulb without taking apart the whole damn bumper.

@whatitisnt.

6 ай бұрын

Just apply Xpel paint protection film on the headlights. Stuff is apparently magic