Car is sitting so nice man! The fitment is perfect.

Sweet that was awesome work bro respect clean an excellent looks good man

Love all you video help me out a lot thanks

These coil overs are awesome. I have some on my LGT and they are fantastic. I bought mine from Cygnus and it seems they are the cheapest

nice job man !

Such an motivational channel, & dude I love your garage setup. Next a lift? Lol

Coilover covers , life saver

@Scoobyfreak86

Жыл бұрын

Definitely a sold investment if you drive in snowy/colder environments.

@charleshawk6668

Жыл бұрын

Never needed them in SoCal

Yuuuussss

Been neglecting the Sti. Good to see u back at on with her

I wonder what the measurements are for stock height

hi, Love the content.. sweet ride.. I notice the breaks. what brand is the rotor set up. drilled holes look so hot??? thanks

@Scoobyfreak86

Жыл бұрын

kzread.info/dash/bejne/l6xqyNhme9W4g8Y.html

if you are bored have a look at my set up . i have some colorado empty roads videos . love your channel and perfect car

11:25 You really should run coil covers. It'll keep everything clean, and easy to work with, as well as improve the longevity of the shock.

@Scoobyfreak86

Жыл бұрын

This car doesn’t see rain or snow

@bujin5455

Жыл бұрын

@@Scoobyfreak86 it does see crap on the road though. Where do you think all of that corrosion came from? I figure $100 is a small price to pay to protect $2k worth of coils.

@Scoobyfreak86

Жыл бұрын

It was my daily for the first year or two of ownership. Saw inclement weather, salt, brine, snow, etc. this current set won’t see any precipitation of any kind. It’s not my daily anymore and only taken out on warmer, dry days. But yes, for others that use their cars year round, covers are a wise investment.

hey scooby for the fronts did you run into the problem of your bottom coilover almost hitting the axles? thanks been following the build for a couple yrs, going to miss it 😢

@Scoobyfreak86

Жыл бұрын

Didn’t have that problem on mine. Something isn’t installed or lining up right if you are having that issue.

19:50 where did you get that screw bolt?

It looks like the lower mounts on the new coilovers are about an inch taller? Based off of what I see at 18:58 but I may be mistaken. Maybe that was how the height was off.

@Scoobyfreak86

Жыл бұрын

Collar sizes were different so it through the height off a bit

I was not aware that a simple tape measure would be accurate enough. Easy to be off by a mm or a 1/32 with a bent tape. Or maybe its just my measurement OCD lol. But if it is good enough it is good enough. Regardless impressive looking coilover. Not my cup of tea but a quality suspension component none the less.

@JHNBHN

Жыл бұрын

I use some cheap amazon calipers. It worked out well lol.

@WRXMAN-ms2mm

Жыл бұрын

@@JHNBHN That makes good sense to me 👍 and would satisfy my measurement OCD. 🤣

Tight fit, did you roll your fenders??

@Scoobyfreak86

Жыл бұрын

Rears have been rolled from a couple different setups ago.

I’m really deciding whether going for koni yellow /gc or the fortune autos ,only considering koni yellow/gc because it’s a bit cheaper.What will be the best choice and bang for my buck?

@Scoobyfreak86

10 ай бұрын

Both are good options, but having the full adjustability of true coils is the way to go. Can really dial in to your liking.

If I wanted to get a similar drop what would you recommend I do not have rolled fenders.

@Scoobyfreak86

6 ай бұрын

You will have to roll the rears to achieve this height

No rubbing? Damn I am impressed it doesn't rub when that low lol XD

@bujin5455

Жыл бұрын

I'm sure it does on compression.

Howd you get it not to rub? And what softness or stiffness do you havw them at

@Scoobyfreak86

Жыл бұрын

Camber is your friend. Check out my how to adjust video for damping settings kzread.info/dash/bejne/naifprmmn7nHf84.html

Do you happen to remember the torque specs for the rear? I can’t seem to find them

@Scoobyfreak86

Жыл бұрын

I don’t. Anything suspension related I use an impact. Anytime I use the torque specs it always clunks and clangs. Quick zip of the impact solves that quickly.

Just curious what are your thoughts on wing stabilizers?

@Scoobyfreak86

Жыл бұрын

Not a big fan of them at all

@Thechaoscrusadors

Жыл бұрын

@@Scoobyfreak86 what do you recommend for the vibration in the spoiler when going above 110kph (68mph)

@codyhendrickson7735

Жыл бұрын

@@Thechaoscrusadors wing stabilizers

@Thechaoscrusadors

Жыл бұрын

@@codyhendrickson7735 that was my first thought and action aswell. I am curious what others do if they dont use them.

@codyhendrickson7735

Жыл бұрын

@@Thechaoscrusadors the only other option is to get a different style of wing.

Hey man i bought some fortune auto coilovers and my ride height is uneven for my rear coils. I adjusted my rear right to almost max out to match the ride height for the driver side rear. Do you think its because of the gas tank?

@Scoobyfreak86

7 ай бұрын

Check the driver front. The car is an x axis and when you are lower on one side to be even, it’s because the opposite side opposite end needs to take some pressure off.

@johnneildeluna3792

7 ай бұрын

@@Scoobyfreak86 I appreciate you always getting back to me with all my questions man. Thanks alot!

@Scoobyfreak86

7 ай бұрын

@johnneildeluna3792 no problem! Always here to help when I can.

Do you have any adjustment suggestions for the end link? I’m getting clunking noises from them

@Scoobyfreak86

Жыл бұрын

Torque them down more while under load. A good zip of an impact usually solves the issue.

@cryMOREjaja

Жыл бұрын

@@Scoobyfreak86 thanks I currently have them torqued to 33lbs , did you end up doing more than that ?

@Scoobyfreak86

Жыл бұрын

Used my impact on mine. So much more than 33 haha.

@cryMOREjaja

Жыл бұрын

@@Scoobyfreak86 oh wow lol ok I’ll give it shot then !

How much for your old coilovers?

@Scoobyfreak86

Жыл бұрын

They have already been sold

@kingvant326

Жыл бұрын

@@Scoobyfreak86 damn 😭😭😭ok

Mine lasted a month tilll they started leaking

You'll be off by a few mm. a digital gauge would be more accurate

@Scoobyfreak86

Жыл бұрын

Using a tape measure always has room for error but has worked for me. I’ve been meaning to get a digital caliper.