Installing LEXUS RC-F Front Lip & Carbon Fiber Side Splitter | HOW TO | Bumper + Side Skirt Removal
Автокөліктер мен көлік құралдары
Installing Front Splitter and side splitter on Lexus RCF with front bumper and side skirt removal. Made the carbon fiber side skirt splitter myself. Stay tuned for more Lexus RC-F content here at Frontyard Motorsports.
---------------------------
Bumper did not reattach successfully first time due to front 5 bolts facing upwards obstructing the mating. We fixed it by removing the bolts and inserted them from top ensuring they point downwards. Afterwards, bumper reattachment was not an issue and was smooth.
---------------------------
Please like, comment and subscribe. Thanks for watching!
Instagram
@barryhuangalot
@stevenlammy
@mralbertooo
@agntchris
Music in this video
Music promoted by 1HMNC - No Copyright Music
Joakim Karud - Dizzy
• Joakim Karud - Dizzy [...
Music by Joakim Karud :
/ joakimkarud
Пікірлер: 67
Quick Comment: The bumper did not fit on smoothly due to the front 5 bolts facing upwards which obstructed the mating. We took all bolts off and inserted them from top pointing them downwards which fixed the bumper reattachment issue. Thanks for watching everyone.
Omg! this video is so helpful and entertaining! I might try on my lexus later!
@thehuangbros
4 жыл бұрын
You should!
Keep kicking ass you two! Y'all still crack me up. :-) tannest twins I ever seen hey glad you figured it out, guy!!
@thehuangbros
4 жыл бұрын
Broooo. LASKYYYYY Thanks for watching man. Subscribe if you havent already done so =]
hilarious video man
@thehuangbros
4 жыл бұрын
we try to be.
Awesome content bro
@thehuangbros
2 жыл бұрын
Thanks appreciate it.
Nice vid guys.
@thehuangbros
4 жыл бұрын
Glad you enjoyed it. Thanks Lennard!
Looks good
@thehuangbros
4 жыл бұрын
thank you so much. glad you liked it.
that looks really good!!! love green DRL. I wish i can find something like that for my 2014 IS350 F. GREAT JOB!!
@thehuangbros
2 жыл бұрын
Thanks. Your DRL is separated too. You can change the color too.
@sebastianliu2009
2 жыл бұрын
@@thehuangbros It's just a spray on right and with some clear coat? Also, have you had any issues with cops on the green DRL?
@thehuangbros
2 жыл бұрын
@@sebastianliu2009 its vinyl headlight tint from viviid
@thehuangbros
2 жыл бұрын
@@sebastianliu2009 no issues from police thus far since it is not red or blue
Nice car Bro!
@thehuangbros
4 жыл бұрын
Thanks bro!
keep doing how-tos. you guys are funny.
@thehuangbros
4 жыл бұрын
thanks we will
Awesome
@thehuangbros
4 жыл бұрын
thanks for watching
This videos really gonna help me with my install. Thanks a lot! Also, was the front bumper wrapped in one piece or did y’all need to do some inlays? Thanks!
@thehuangbros
4 жыл бұрын
Thanks man. It was two pieced cause we didn’t have the correct length but definitely could have done it in one piece.
Nice video. Question: on the side original holes where you removed the white factory retainer, how did you go back (inside) to attach the plastic engine splash shield? Remove wheel splash guard?
@thehuangbros
3 жыл бұрын
I reconnected while under the bumper. I made it fit and match before putting in screws
bro, where did you get those side skirts?
Le servirá a RC F Sports 2015 ???
I think I learned what no bolts and nuts will do to a expensive nice front splitter lip. =)
@thehuangbros
4 жыл бұрын
Yup lets not repeat that experience
Not Bad, I put a Tom's Side Skirt and Rear Diffuser on my GSF I was about to put a Front Lip on my Car but I'm suck on Parking, Sometime I forget when there's a Curb Bump on a Parking Lot and most like I might Hit it
@thehuangbros
2 жыл бұрын
2 months after this install. I accidentally inched up slowly too much and tapped my lip
Its always those damn screws smh. Great video!!!
@thehuangbros
4 жыл бұрын
thanks amy! we gotta get you in the video!
Is there a video of your hood, inside part
@thehuangbros
3 жыл бұрын
Which part specifically? The hood vent or my Panda and Moon artwork?
Hopefully this video helps for my future RC -F!
@thehuangbros
4 жыл бұрын
Hi, Jenny. Yes most definitely once he sells his other lexus lol. make sure you subscribe if you haven't already!
@barryhuang3723
4 жыл бұрын
Hi Jenny! You should do lashes on youtube.
Doing this method I feel like it’s more secure then tap screws holding it on. My First splitter flew off at 90mph😭 and one of the nails cake loose and hit my tire = flat
@thehuangbros
3 жыл бұрын
Lmao. I don’t care how many times people say tap screws work. Ive never seen nuts and bolts fail compared to the 5-6times I know of tap screws failing. I can even get pictures to show the times it failed hhaha. But that really sucks tho about your flat tire.
@vvsre760
3 жыл бұрын
@@thehuangbros yeah ;( tap screws a no go ! . My buddy even said to do nuts and bolts. I might add 3M for my next lip for extra secure
@thehuangbros
3 жыл бұрын
@@vvsre760 did he have bad experience or seen tap screws fail?
@vvsre760
3 жыл бұрын
@@thehuangbros he said yeah cause high speed wind can be constantly pushing on down the lip and the support for tap screws are bad.. he has an e36 328i.. he went nuts and bolts no issues
@vvsre760
3 жыл бұрын
@@thehuangbros you have Instagram I could follow ? Love the rcf
How did you change green caliper?
@thehuangbros
Жыл бұрын
I took them off and painted them with duplicolor.
How do I apply for a sponsorship from stevenlammy??
@thehuangbros
4 жыл бұрын
you have to go to his ig @stevenlammy and then unfollow and refollow so that you can grab his attention. Once you do that, you slide into his dm.
What brand is the front lip?
@thehuangbros
2 жыл бұрын
Artisan Spirit
first!
@thehuangbros
4 жыл бұрын
Hey thanks for watching my video
10:01 side splitter install portion
@thehuangbros
4 жыл бұрын
yes thats right.
Is that a novel front lip?
@thehuangbros
2 жыл бұрын
Nope. It is Artisan Spirits.
Link please
@thehuangbros
3 жыл бұрын
Link for?
@racing747
3 жыл бұрын
@@thehuangbros Front lip. Thank you!
hi it me
@thehuangbros
4 жыл бұрын
hello sir. thanks for being featured lol
Double stick mounting tape would have fixed the gap issues. Nice work though.
@thehuangbros
3 жыл бұрын
The double sided tape is usually the go to move but it still leaves a gap over time because the double sided tape os thick. Also with my driving style, overtime the pressure from the air most likely would separate it from the double sided tape haha