On a scale of 1 to 10 how nervous would you be about cutting two massive holes in your van?!

@caseyellie

3 жыл бұрын

i had to have a sit down & an adult beverage after doing something similar ! love your channel , keep up the good work!

@TheWholeWorldorNothing

3 жыл бұрын

Haha, the nerves never go either do they! Every single hole we cut we got the jitters. Thanks for watching 😀

@mazriel666

3 жыл бұрын

10! Trying this weekend. Thanks for the help :)

@TheWholeWorldorNothing

3 жыл бұрын

Well good luck! You’ll be fine, take your time and you’ll have no problems 😀

@bodhifever4626

2 жыл бұрын

10 for sure!

Maxxair fan deluxe is absolutely amazing. Worth every single penny.

You guys are so fun to watch! I'm glad I stayed after I saw your van tour video. ❤️

@TheWholeWorldorNothing

3 жыл бұрын

Ah thank you, we’re glad you stayed too!

genuinely the best van build series I have ever seen, and trust me I have seen loads! 😂

Guys, a great video and not over complicated. Currently converting my crafter and also was twitchy bum time when cutting the hole. Now it’s a cinch. Windows done, fan done, bathroom extract done, 240v hook up socket done. We all know your end result but great to watch. Live the dream and hopefully one day we will meet 👍❤️

@TheWholeWorldorNothing

3 жыл бұрын

Ah thank you. Yeah the first one was definitely the worst but can’t lie, we still felt a little twitch with every hole we cut 😂 Sounds like you’re pretty far along with your conversion. Would be great to meet up for sure!

Hola from Mexico 🇲🇽 We are enjoying your channel - Looking forward to seeing your van finished - great work guys 👍

@TheWholeWorldorNothing

3 жыл бұрын

Hola! Glad you’re enjoying the channel 😀

Tip for neat sealer, put a run of masking tape where you want the sealer to finish on the roof.

@fathead1968

3 жыл бұрын

Loving the series, binge watching now!

@TheWholeWorldorNothing

3 жыл бұрын

Great tip! Thanks! So glad you’re enjoying the build too, appreciate the feedback 😀

The wooden frame is that really necessary? or can you install it without making that? Really enjoyed the video! 🙏🏼😊

greetings from Ireland looking good guys well done

@TheWholeWorldorNothing

3 жыл бұрын

Thank you 😊

Enjoyed this video from here in Virginia in the US. I'm building out my Chevy Express 2500 cargo van. I was planning on putting in two MaxxFans to get some serious air flow going. Hadn't considered one fan plus a skylight vent. I know you can use the fan in the rain, can you leave the skylight door open in the rain as well? P.S. On a random note, yours is the first yt video where I actually enjoyed the background music, especially that ska sounding song. Cheers!

Nice work. 👍 Which mastic strip did you use please? Do you have a link to it?

Hi, how have you got on with the Skymaxx Rooflight now some time has passed? Im trying to decide between this or the Dometic rooflight. Thanks for the videos

hi guys did you know after installing one myself the 4 scres to fix the fan to the flange you used the white ones. These are for the interior garnish cover, they are not stainless

was the skylight any good in the end?

So I put up my Max Fan today then opened up the Skymaxx box to fit it in the rear and realised it wasn't going to be as simple to install. Search KZread and low and behold my favourite KZread couple bought the same as me. What a work up that was to put up. Did you find it a PITA as well??? I totally agree with James, not really a fan of the quality.

@TheWholeWorldorNothing

3 жыл бұрын

Haha great stuff! Yeah it was a proper pain to install. However, even though we were worried about the quality it’s held up well so far and isn’t as flimsy as we first thought. And it’s well worth the effort in the end - the breeze it pulls through with the fan on is lovely in the kind of weather we’re enjoying now 😀

Nice job guys! I have that same exact skylight and haven’t installed it yet. Was a little nervous after looking at it and was thinking the same thing as you. Have you driven the van around since you installed it? Just wondering if it will rattle or anything.

@TheWholeWorldorNothing

3 жыл бұрын

Thanks! Yes we’ve had it in for around 4 months now and it’s actually been great. No issues whatsoever. It doesn’t rattle, hasn’t leaked, and even though it’s not as sturdy as the fan, there’s nothing to worry about in our opinion. Pretty happy overall 👍

Sikaflex is a brand that does many types of sealants and adhesives etc. Could you be more specific. You should have put a few screws in the wooden frames. And also don’t use your hand to check for sharp bits. Doh! You guys seem to be doing a great job though.

@TheWholeWorldorNothing

3 жыл бұрын

There are a couple of caravan-specific Sikaflexes, some which are waterproof etc., but we put links to most of the stuff we use in the video descriptions so hope that helps 😊 The frames don’t really need screws in as the wood glue is pretty strong and they’re being sandwiched in place by the two sides of the vents, we’re pretty confident they’re not coming apart any time soon. Definitely not the best way to check for burrs, no 😅 but we suffered no injuries in the process. Many thanks 😊

Hey guys, I was planning to put 2 Maxxair deluxe and was wondering: do you think one is enough in combination with the skylight? Or would you feel like 2 fans would be a big enrichment in terms of ventilation? Thanks a lot!

@TheWholeWorldorNothing

3 жыл бұрын

Hi! In our opinion (and our experience of using it in the recent heatwave as well!) one fan plus the skylight is definitely enough. The Maxxair fans are really powerful so as soon as you turn it on, any other opening is enough to create a good breeze - even with just our small back window open a crack it still produces a good draught, and with the skylight open the ventilation is amazing, it’s like a wind tunnel 😅. Assuming you’ve got the same sized van as us we’d suggest one fan and a skylight is more than sufficient. Really not sure how much more efficient two fans would be, if at all. Hope that helps! Let us know if you have any other questions 👍

Hi, great video, as always! We've just bought a Sprinter and have just completed our insulation and are absolutely loving your videos. I noticed in this video that you have aluminium rails on the roof of your van, can you please tell me where you sourced them? Thanks and keep on posting these tutorial vids x

@TheWholeWorldorNothing

3 жыл бұрын

Great to hear, glad you’re enjoying the vids 😀 That’s awesome, hope your build is going well! Yeah no problem, I think the rails were from eBay but I’ll just double check and pop a link to them up 👍

@TheWholeWorldorNothing

3 жыл бұрын

Ok here’s a link to the seller we bought them off - ebay.us/Fa6xzk let us know if you have any other questions 😀

@lynseypili2801

3 жыл бұрын

@@TheWholeWorldorNothing amazing, thank you!!

@TheWholeWorldorNothing

3 жыл бұрын

No probs 😉

Hi, looking good I’m just about to invest in windows and the same fan as you have just fitted, does it come with the roll of mastic or do you have to go elsewhere for that, thanks

@TheWholeWorldorNothing

3 жыл бұрын

The fan is great, well worth the investment in our opinion. It doesn’t come with mastic though, no, you’ll need to buy that separately. There’s a link in the description to what we used. Let us know if you have any questions about the installation that we might be able to help with!

@darrengregory6678

3 жыл бұрын

@@TheWholeWorldorNothing Thanks

@TheWholeWorldorNothing

3 жыл бұрын

No problem 😌

Hi, so possibly a stupid question but how is the fan powered?

@TheWholeWorldorNothing

3 жыл бұрын

Hi! Not a stupid question at all. It runs off our electrical system which we hadn’t built at this stage so it’s not actually working here. We installed the fan first then hooked it up a little later in the build once we’d put our batteries and solar panels in 😀👍

Hi both what size wood did you use on the frame ?.

@TheWholeWorldorNothing

3 жыл бұрын

We used 34 x 34 to construct the frame 👍

@user-ww7oq8wz7j

3 жыл бұрын

Cheers guys you’ve helped a lot so far much appreciated 👊

@TheWholeWorldorNothing

3 жыл бұрын

No problem 😉

Did you have a problem with the depth it goes with the skymaxx? Mine doesn’t quite marry up

@TheWholeWorldorNothing

3 жыл бұрын

We had a slight problem trying to screw the fan into the flange but managed to solve it and get them to line up eventually but we didn’t have a problem with the depth. Is it a sprinter that you installed it in?

@MxWoody

3 жыл бұрын

Ok I’m not fully finished yet. Got to install the carpet on the roof then I can line it all up. Yes it is on a sprinter.

@TheWholeWorldorNothing

3 жыл бұрын

Yeah you should be fine in that case 👍

@tedwardjo

3 жыл бұрын

I put one in at the weekend but my overall depth is closer to 70mm than the max 60mm on the spec, ned to find some longer screws

@TheWholeWorldorNothing

3 жыл бұрын

Hmmmm. I’m not sure why but we didn’t have this issue. What size wood did you build the interior frame from or did you use a different method?