We've received a lot of requests for the metal box we designed for the air handler unit. We now have formal plans available on our website! Air Handler Plenum Design ⬇ www.masondixonacres.com/products/mrcool-universal-2-3-ton-air-handler-return-plenum-design

I installed this exact unit 2 winters ago. You will love it... The metal filter is electrostatic and doesn't hurt anything. I have a paper filter and the metal electrostatic one. I have a heat strip for backup but it doesn't run. The 2 ton switches are wrong for the instructions. I think you saw the same problems I did. We are in Missouri and it has worked at -20 and still heated the house. July here 100 degree days and my electric bill is $125 best ever. I have crappy videos of my install. Nothing as good as yours! If you start it up in cool and it heats, you did nothing wrong , it's the switch on your thermostat. Most ac units default is cool . Mr Cool default is heat . It's the o/b switch if I remember correctly. Good luck!

@MasonDixonAcres

Жыл бұрын

Thank you for that tip!! Glad to hear the unit has been doing great for you. Getting insulation in now, then our vapor control layer and I will do a start up and flow balance. Stay tuned

@thelouiebrand

8 ай бұрын

I have a 4 ton and when it dips below 25° I lose heat. I just added a heat strip (which brought me here). I don’t even know when the heat strip is on.

@YoureaPOG

4 ай бұрын

That will kill your blower motor and compressor. 2 filters will create way too much static pressure.

thanks for this video i got my duct work done and my unit is arriving Monday wish me luck diyers

@dxbbred

6 ай бұрын

how'd it go? about to do the same

Excellent job sir thank you

Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) kzread.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

You want to wire up the D terminals between indoor and outdoor unit. During defrost, the air handler fan will cycle down so it's not blasting cold air.

@karmendimas5274

Жыл бұрын

Just installed a mrcool Universal system with no heat kit so you're saying what I should do is have the D wire hooked up on the condenser Hooked Up to the D wire on the air handler?

@rvamtbram

Жыл бұрын

@@karmendimas5274 That's correct

@karmendimas5274

Жыл бұрын

@@rvamtbram when the condenser runs in defrost, does the air handler run for 5min before it stops or does it stop right when the condenser begins its defrost cycle,,? also , is it normal for the fan (air handler) to run for 5min after the condenser has reached the set temp on the thermostat,? i am assuming you also have a mr cool universal...

Having 8 Wire when you only need 6 for your thermostat is good actually. It gives you 2 spare wires to use if one gets damaged down the road and you dont have to run new thermostat wire !

I loved my foam gun. Always have a can of the thread on cleaner for inbetween. Mine was cheep amazon one.

No need for the screen. Or additional 1” filter. It’ll only add static pressure…I installed a similar vrf heat pump with an external 4” filter cabinet. I use a merv 13 4” pleated filter that I buy from local distribution. 20x20 is a common size so should be easy to find.

@MasonDixonAcres

Жыл бұрын

Good to know, thank you!

I never knew MR Cool made DIY split system.

@MasonDixonAcres

9 күн бұрын

Yep! It's been amazing through this crazy hot summer.

kudos from singapore. 👏

You may need to install a vent on the drain side of the trap. I just installed one with a short drain with no vent and it airlocked! The pan filled up with water. I put a condensate float switch in the second drain port that shut down the ac when it filled up. My air handler is in the attic so it did it's job!

@MasonDixonAcres

Жыл бұрын

Interesting, I'm surprised it's possible with the positive pressure in the cabinet which I would guess is a supply of air to backfill the water draining out the trap. I'll have to keep an eye on it!

@jlongjr27

Жыл бұрын

@@MasonDixonAcres It's actually negative pressure because the blower is pulling air through the coils. It happened almost immediately after turning it on the first time. It ran for a day and a half before it air locked long enough to fill the pan. It's a good thing to have a trap on the Mr cool because otherwise it could suck in dirty air. I guess there was just enough vacuum the way my drain is set up to cause that. Makes me wonder about the winter when the water evaporates from the trap and it's pulling dirty air in. Edit, another though is I'm in Houston where the humidity is really high so if you're in a drier area yours may not condensate as much water.

@MasonDixonAcres

Жыл бұрын

Oh yeah negative pressure would make sense. I can see how that would happen then. I can’t imagine more than a negligible amount of air would draw through that long condensate pipe compared to the return ductwork. The beauty of the clear trap.. as long as I keep an eye on it 😁

Did you wind up installing the heat strips or was it sufficient enough without them?

@MasonDixonAcres

Ай бұрын

No need for them in a well air sealed and insulated home!

Thank you for the video I am able to install my Mr cool universal by myself .

Hello Mason, can you please share what did you use for the thermostat? Is it Nest? If not then any idea - is it compatible?

@MasonDixonAcres

6 ай бұрын

Ecobee Pro! More to come in the startup video

Hey so how is your mr cool unit holding up. Have you had any issue with it. I would like to het the same unit. Especially after seeing your video....

@MasonDixonAcres

6 ай бұрын

Actually just finished the ductwork and waiting until interior is basically finished to start it up to keep dust out of the system. Will have a start up & balancing video coming

Hi. Great job! Can you please elaborate more on the final Thermostat > Indoor Unit > Outdoor Unit wiring? I can't seem to get it work, following their instruction manual. If you can please share...

@MasonDixonAcres

Ай бұрын

Initial startup video is in the works with that info! In the mean time their support team is awesome, just give them a call

I am currently designing our dream house that we are starting next spring. Can you please kinkly tell me what "cheap architect software" you are using

@n_a3522

8 ай бұрын

I’m interested in knowing this as well.

@MasonDixonAcres

Ай бұрын

haha it's called "chief architect"

Is your system going to pass inspection with it being so close to the breaker panel?

@MasonDixonAcres

9 күн бұрын

Already passed, it's pretty well outside code required clearances of the panel. That said, if I could've had the foresight to scoot the panel a foot or so to the left, I would have

You want to mount the thermostat 6ft from a central return.

Can you do a video on the duct work please.

@MasonDixonAcres

Жыл бұрын

Coming soon to a KZread screen near you 😉

@amandareed8989

9 ай бұрын

How soon is soon? lol @@MasonDixonAcres

Did you use regular thermostat cable???

@MasonDixonAcres

Ай бұрын

Yep 18-8 for some extra conductors just in case

I think Great Stuff only works with their guns as I tried theirs in my other gun (same as yours) and had the same results.. I have since bought the great stuff gun and it works flawlessly..

@MasonDixonAcres

Жыл бұрын

Ahh gotcha thank you for that! It's definitely the gun's fault. I figured as much when the cleaner can wouldn't do anything in that gun.

anyone installing the mrcool no vac line sets have issues with connecters threads not engaging?

You mentioned the indoor air handler was just a 15 amp circuit. Was that 110V or 220V?

@MasonDixonAcres

Жыл бұрын

220.

Are you going to make a video showing the ducting? I’m mostly curious about how it connects to the air handler. Loved the video thanks.

@MasonDixonAcres

Жыл бұрын

That's the plan! We are working on mechanical rough-ins now. The video will likely be out in several weeks!

Oh man. What a mess with the foam gun. I only have one data point to add on the foam gun, but it seems like maybe you had something weird going on in your particular case with either a defective can or gun. I've run dozens of cans through my pro gun, swapped them out mid-can, re-fitted partial cans, and never experienced a failure like that! I've even had the gun with an attached can fall about 6ft and knock the can off the threads..other than a small amount of loss, i was able to screw the can back on and it continued to work. I do make sure every time i change a can, i use the can of cleaner to both clean out the gun, but also spraying the cleaner on the gun and the partial remaining can's mating surfaces to ensure they're totally clean before storing either.

@MasonDixonAcres

Жыл бұрын

Wow I have no idea how you've done it. Maybe it's the gun I have. I got it with a kit of their subfloor adhesive off some website called "A Warehouse Full" and it's their own branded gun, not the Great Stuff brand gun. I think I'll need to buy the OEM gun.. I still have most of a case left so I'm not letting that go to waste! Something must have been going on with that can too - even with a clean spout and nothing attached it wouldn't stop leaking.. what a freakin mess 😅

@probmxjona

10 ай бұрын

I’ve ran about 50+ cans through my progun and have not had a problem with it yet.

What model is the Mr Cool heat pump with the air handler? Thanks!

I just order this unit... How large is the insulation on the line set? Do you think they will fit in a single 4inch pipe chase?

@cannotequaltoshould4911

3 ай бұрын

what is the outside diameter of the line set?

Can you say where you purchased from?

@MasonDixonAcres

Жыл бұрын

iwae.com!

What size breaker did u use for the out side unit

That’s the thing with spray foam, it just keeps expanding and doesn’t stop.

What size crows feet did you use for each adapter on the torque?

Do you have to run a 230 to the inside unit as well?

@MasonDixonAcres

2 ай бұрын

Yes 15A double pole

Can you post your sketch of the sheet metal box? Need to get one made up myself just like that. Did you end up finishing the duct project yet?

@MasonDixonAcres

Жыл бұрын

Ducts are upcoming, if you email us I can send ya the sketch

@johnspanos3862

Жыл бұрын

Me too!! Email you tomorrow - thank you!!

@garycorlew2080

Жыл бұрын

I would also like a copy of the sketch please, I will be ordering one of these soon

Also, it’s good practice to use Nylog on any flared HVAC connection…not sure if you did or not.

@MasonDixonAcres

Жыл бұрын

I don't know if you could consider these quick connect lines a traditional flared connection, I didn't look at them super closely honestly. I did consider the Nylog but the specs warned not to do it so I decided not to.

@Lipupu92

6 ай бұрын

@@MasonDixonAcres Where in the manual did it indicate this? I was trying to find it again since I am doing my install. I had found somewhere, someone advised that lack of Nylog is the main reason these no-vac quick connects leak out.

OMG GREAT

Great job

What is the name of the the architect software? Thanks

@MasonDixonAcres

Жыл бұрын

Chief Architect

@rocknred123

Жыл бұрын

@@MasonDixonAcres Thanks pal

Do you have video on the rest of this? Thank you!

@MasonDixonAcres

9 ай бұрын

Coming soon!

I already have a boiler. Do I still need this heat pump? Is there a heat pump which only provides cold air?

@nathanmohn4272

Ай бұрын

Yes, it’s called air conditioning. The way an AC and a heat pump cool is exactly the same.

Did you ever have an issue of your thermostat wires not receiving any power? I'm currently finishing install, but my system isn't energizing the wires.

@MasonDixonAcres

10 ай бұрын

Maybe check your connection and measure voltage at the board at the board terminal for the wire that's supposed to be constant 24V

Hi there , so the outdoor unit uses 220 and the inside unit fan uses 115,? Can you please expand on this, I’m installing the same unit and I’m stuck in this step, thank you for this amazing video

@MasonDixonAcres

Жыл бұрын

Inside also used 220, 15A double pole breaker. Full load amperage of the fan is 2A so a 14 ga wire is all you need since it’s a dedicated circuit.

@davidduarte6389

Жыл бұрын

@@MasonDixonAcres hi again, so this is what I have , I have a 30amp barker in my electrical box just for this unit, then from there I run a line to a disconnect box the using 10/3 wire, from the disconnect box I run a line to the outside unit, now my question would be , from the outside unit do I run a cable to the inside unit? Thank you .😊

@MasonDixonAcres

Жыл бұрын

No, separate circuit for the indoor unit. If you have any additional questions just call their tech support, they are fantastic and answered many questions I had.

Great video! I'm looking to purchase the same system. Did the pre-charged line set come with the 4 fittings to adapt to the two units? No seller I've found can answer that question. Thanks!

@MasonDixonAcres

9 ай бұрын

I believe it was the Universal system (not the lineset) that came with the adapters, but yes. It came with adapters for either the No Vac quick connect lines, or traditional brazed lines. If you call MRCOOL, they will tell you exactly. Their customer service is honestly some of the best I've ever dealt with - real people sitting in Kentucky.

@throngcleaver

9 ай бұрын

You are awesome! Thank you for getting back to me. 😁 The photos of the line set boxes on various websites that sell these units, show the 4 fittings, but it makes sense that they would come with the two units. I will call Mr. Cool in the morning to verify that. Thanks again! I subbed and will enjoy catching up on your videos! 😊

Buddy, did you use the 10 2 romex for thw air handler too?

@House-m.d.

4 ай бұрын

That looks like 14/2, the white one.

Whats the ducting size required?

@MasonDixonAcres

6 ай бұрын

Ductwork video coming up soon! Completely depends on the size of the house, branches & lengths, turns, etc. to get it right, you most likely will need to hire a professional designer with access to the right software. Avoid the "rule of thumb" methods that most ductwork contractors use.

Is there fiberglass inside the air handler?

@MasonDixonAcres

6 ай бұрын

No it’s insulated with EPS foam on the interior

@diaperdood1

6 ай бұрын

@@MasonDixonAcres thanks so much!!!!

How long are the copper line sets

@MasonDixonAcres

8 ай бұрын

these are 15', they have 25 and 35s as well

Me that never did any DYI, live in an apartment and have AC already installed: 👁️👄👁️

Assuming you have zero intention of installing heat strips in your indoor air handler - is it a bad idea to use the 240V for the outdoor unit and also use that to power the indoor unit air handler?

@MasonDixonAcres

11 ай бұрын

It’s recommended to put them on separate circuits

@chuckvaughn

11 ай бұрын

I've got mine on separate circuits

Nice video! Get your hearing checked.

Did you get that unit with the electric heating coil, or are you just going to rely on the heat pump?

@MasonDixonAcres

Жыл бұрын

No electric heat backup.

@bgd5339

Жыл бұрын

@@MasonDixonAcres how many btu's is the heat pump?

@karmendimas5274

Жыл бұрын

@@bgd5339 I have the same system, its configurable to 24,000btu(2ton) or 36,000 btu (3ton) this is selectable by a dip switch

User error on the spray foam, been using pro cans for many years and have never had that issue. 😂

@MasonDixonAcres

Жыл бұрын

It was the gun, got the brand name gun for the stair project and it worked fine

Where is your return for upstairs

@MasonDixonAcres

Жыл бұрын

Covered in a future video on the ductwork

@leviday9264

10 ай бұрын

​@MasonDixonAcres Did you make a video on the ductwork yet? I would be interested in seeing it! Great video on the install so far!

Foam gun is good. Use it all of the time. Just need to know how to use it. Don’t knock the gun man.

@MasonDixonAcres

10 ай бұрын

Nope it was the gun - in the next video I got the Great Stuff brand gun - it worked perfectly

I hope he vacuumed out those linesets! Otherwise the refrigerant will react with the moisture in the lines from the air humidity and create acid that eats at the copper, damage the compressor, and cause all sorts of issues.

@MasonDixonAcres

9 ай бұрын

Precharged linesets don't need any additional vacuuming

Unless you are abosulutely sure you won't be doing anymore work around those plumbing on that wall, no matter what your local code enforcement said, I'd cover all those exposed wires up if I'm you. I go by NEC, not the local code enforcement. Those colored plastic cladding are not as tough as you think they are.

get a surge protector ..

美国人动手能力都这么强的吗？

I can’t really understand why you guys did baseboard heat on the bottom and a heat pump for the top when you could’ve used the Mr cool system for both floors. Seems like a waste of money.

@MasonDixonAcres

10 ай бұрын

Garage and living space can’t share air

@Albanianguy9

10 ай бұрын

@@MasonDixonAcres lol You could’ve just done a small mini split for the garage area specifically and then use Mr. cool for the rest of your house. Just seems really complicated but to each their own.

i'll only buy japanese mini spits

Great Stuff is really great stuff, but you CANNOT reuse a used can. well, it's not that you CAN'T, but it never works as well as a fresh can does. and those "Pro Guns" are really garbage, and not necessary in most cases. but you really need to clean them out/off IMMEDIATELY after each use! that stuff is a hassle to remove when it's dry.

@MasonDixonAcres

Жыл бұрын

I actually learned on my stair video it was the gun that was the issue. It wasn't a Great Stuff brand.. got the right one and it worked as intended

This isn’t DIY

@JOIHIINI

Ай бұрын

Well if you don't do a trade for a living and perform the work yourself then it is diy

By the way you voided the warranty by installing it yourself

Use the Metric system, and don't tell me your an American so I can do it. I'm American and use Metric so no excuses.

You hear that sound? That’s me driving away from your diy install when you cal a few years from now and it’s not working

@grantwalker270

Жыл бұрын

Oh no not Tim

@FJB2020

Жыл бұрын

7 or 10 year warranty on these DIY units.. you probably wouldn't get the call anyways lol..

@timrob0420

Жыл бұрын

@@FJB2020 I doubt they’d be replacing their own compressor or anything actually skilled related themselves under warranty….

@kettch42

Жыл бұрын

When having the pros install it almost triples the price, you could afford to install it once as practice and then send it to the dump when it doesn't work, and then do it again. And still save money. It's hard to justify the price if you have some diy capability.

@FJB2020

Жыл бұрын

@@kettch42 That is exactly right and it is not like Mr Cool is a no name brand.. They are made by Midea who is the worlds largest manufacturer of AC products. I have been installing them on mine, my friends and families homes for 8 years now and I have NEVER had an issue. All these 'pro's' just get mad that people can install these for a fraction of the cost.. Hell, I just bought another Mr Cool 18k Unit for $810 for my new garage. Might cost me another $90 in wire/disconnect to install and I bet I couldn't have one of these 'pro's' do it for under $4k...