Installing a universal tv board and control the PFC
This next repair is how to install a universal tv board and control the PFC. And let's welcome FLUKE 289, our new partner in troubleshooting. Tips and Tricks. please like share and subscribe.
This next repair is how to install a universal tv board and control the PFC. And let's welcome FLUKE 289, our new partner in troubleshooting. Tips and Tricks. please like share and subscribe.
Пікірлер: 121
This type of repair requires a high level of expertise. You're amazing, Tevz.
Exellent ..
2:51 EXCELLENT UPGRADE!
This is to far level for me Even if I watched this video much times. Only engineer like you sir can do this. Usually I download your video and I watched much times as I can so I can understand it. But sometimes when there are to much modification I can't understand it. Need to learn a lot from you sir. Good job 👍 ❤️
I really appreciate what you do. Sometimes Struggling to fix the tv with one hand so that you can video tape the process to educate us is really amazing. Only a few can take that privilege
Nice video
congratulations for your new multimeter ❤
Fluke good quality
Very nice job. Never hear about a universal tv board, good to know.
Thank you for sharing high-quality maintenance knowledge with everyone. Upvote for you!
Good for you. you deserve a good Fluke multimeter Tevz
Amazing fix! Probably no one fixes this tv as you did in my country. They offer to change board or chip with original one which is almost as expensive as the TV itself.
Salamat sa pagshare sir tevz..
good jop mr tevz
Congrats mang tevz
Truly amazing!
Welcome "Fluke"!
Great video always ❤
Very good idea for PFC on/off
Hello Tevz, better if you work with new capacitors even to show us how to fix it. The multimeter is great of course because Fluke offer the best Insulation and protection on their multimeters also measure with high Frequency which mean more precision when measure voltage with frequency on power suply Chopers. Be careful when you measure voltage and Current with those probes and choose the beter with more insulation for do not fail when you are runing with diagnostics. Try TP80 but from MC brand, the Fluke sell those and are perfect for Nano technology. If you see today TP80 from Fluke with very small point and cover colored protection are not so good but if you see those from MC with transparent covers that mean very good. I don't know why they change those because they was perfect many decades. Must be writing on probes MC not Fluke.
Really excited 😮❤
Good boy
Nice sir
Thank you very much sir
I like your videos. Thank you. That is really awesome work.
@tevzTVTevatronics
11 ай бұрын
Thank you very much!
Nice explain for pfc connection
@tevzTVTevatronics
11 ай бұрын
Ok. Thanks
Good day sar ,Thanks sar,keep up , that's great
good work tanks very much
Very nice way of working and explaining
i cant doubt your expert skills sir.. i learned alot from you. But, sometime im very scared by seeing your soldering technique.. but its ok as long as its solder doesnt make any shorts circuit.. cheers sir 🍻
Perfect well made repair video.
@tevzTVTevatronics
11 ай бұрын
Thanks 👍
nice one sir, i really enjoy every bit of it.
@tevzTVTevatronics
11 ай бұрын
Glad to hear it
Good
it's great 👍
galing mo talaga master tevs.. anong sikreto ba para matuto ng ganyan? sarap manood👍👍👍
when will i be this good wow good work tevz
just imagine your clients say do whatever it takes to make it work this will be the outcome all credit to the technician who know his stuff. 👍
Good day sir nice your video sir
And lalim n sir ng knowledge nyo said electronicss
Great video like always ❤
@tevzTVTevatronics
11 ай бұрын
Thank you 🤗
Very Very good your vídeos, amazing, congratulations
@tevzTVTevatronics
11 ай бұрын
Thank you very much!
Good morning 🌞🌄
nice master class thanks very much👍👍👍
@tevzTVTevatronics
11 ай бұрын
You are welcome
z1o tevs sir informative vidioe
amazing work tevz! congratulation!
Very Very Thanks Sir
great job ❤
👍👍👌👌
Good morning Sir Have a nice day. 🙏👍
@tevzTVTevatronics
11 ай бұрын
Good morning
👏👏
Perfect
Hi dear Mr tevz It was really great. But I think I never could be able to learn that cos connecting wires of new board are very hard and there are several items to do and to know specially the trigger protocols is confused able I prefer to get a new or used main board for customer and not found give it back to him that,s it.
Big up Boss ☺️ the upgrade nailed it all😲 if you won't mind sir send me the older one multimeter 🙏
@tevzTVTevatronics
11 ай бұрын
hehehe
Very experienced led tv nolege
nice mod your channel is the best i have seen.the audio translate iwas the best idea to get many views...where do you get the universal board ...keep up the good work
Those LG TVs from around 2012 all seemed to fail due to that chip overheating and separating from the board. In the UK I remember a lot of these TVs being scrapped because even a replacement board from a broken TV would do the same thing a short time later. It's interesting to see these universal boards being used - here it would cost almost as much as a new TV to get someone to do the work you've just done on the set, as it takes skill and time to do it. Is the picture quality as good with these boards? With your level of skill I think you could make a fortune in Europe or the USA!
Muhteşem ❤❤❤❤
u gotta be a major engineer
Good job on the PFC & 12v separation, I did similar to a Sharp 52 inch but psu only hd 15v output :(
@winlose3073
5 ай бұрын
why separate the pfc ? it's not separated at standby in normal conditions?
Hi. Tevz missed you
@tevzTVTevatronics
11 ай бұрын
Me too
Thanks sir ...
Hmmm. I have been doing this conversion. You just struck me with this new pattern. Seriously i don't understand why and what you did to the PFC. I will only connect the PS to the 3.5V and thats all . Can you please explain what happens if i dont separate the PFC. Is this method only applied to LG power or every other brand.?
@tevzTVTevatronics
11 ай бұрын
PFC is like a primary regulator, the main capacitor will boost upto 390 volts, some lcd backlight inverter won't turn on if the PFC is not active, its necessary to turn it off if is not used, it's consuming electricity so it must be turned off.
@irishguy200007
8 ай бұрын
Where did he connect the 3.5 volt pin to using the resistor? I find it very difficult to understand the commentry.
Wow, your videos are awesome! Maybe I missed it but I did not see or hear a part number listed for the universal board or a source to purchase it from?
Is there a website you can recommend for electronic repair training? other than you 😀
Hi Tevz. This stuff with converting tvs is cool. I would like to try it on my old Sony tv. Is this board has a DVB-T2 tuner? if not, which cheap board has it? Regards.
@tevzTVTevatronics
11 ай бұрын
I did not see a universal with DVB yet.
CIRCUIT WIZARD!
Congrats lakay😊,,anya gamit mo gayam panagbuttaw mo dyay plastic pra agidyay input mo nadalus panang buttaw mo lakay hehe
@tevzTVTevatronics
11 ай бұрын
immoko nga bassit
en mi pais ,no ceptan este tipo de trabajo..
Most expensive fluke multimeter 😮😮
Where do you got the Fluke 289 from? Some lucky find?
@tevzTVTevatronics
11 ай бұрын
from a friend
Hi Mr tevz again. Something I remember to ask you ! Why did not reball the ic of mainboard once may be it solves the problem!!! What do you think?!
Sir l am frome India I like your video but unvershal board installed iam not interested but mistake is there
where to uplod this firmware panel
А что с родной материнкой, и в блоке питания нужно пропаять все микротрещины. И не жалей флюс.
Basta ilocano nalaing taga ano ka boss loc mo?
@tevzTVTevatronics
10 ай бұрын
laoag city
My microwave isnt showing any channels. Can you fix it?
@tevzTVTevatronics
11 ай бұрын
make that the hdmi is connected
Need USB software updation of under universal android (S368A1.5 )smart led tv
@tevzTVTevatronics
11 ай бұрын
sorry I dont have it
Clever but soldering?
Where did he place the resistor between? I find it almost impossible to follow what is being said.
I also have to buy a good and expensive multimeter, my primary one is got damaged during continuty test😢
@AwmteaPachuau
11 ай бұрын
You should not plug into a power source while doing continuity test.
@techprodippro2224
11 ай бұрын
@@AwmteaPachuau I did disconnected but the main capacitor was charged
We're ru from
@tevzTVTevatronics
11 ай бұрын
Philipines
PFC meaning sir
@tevzTVTevatronics
11 ай бұрын
power factor correction
@satya4981
11 ай бұрын
@@tevzTVTevatronics TQ sir
Lovely but still not At this level
Fe
Sir bka nmn pweding tagalogin mo nmn kc kramihan pilipino Ang nanunuod sayo pano namin maiintindihan ng mabuti sana may tagalog k nman sir
@tevzTVTevatronics
11 ай бұрын
ang simple na nga yung english.
use the fucking Flux..
FFS learn how to solder!
I should have to replace the chip 1000 times! That is awesome but tooooo demanding!
That would be wrecked for parts in OZ as no one would pay to repair an old pile of crap like that, just way too uneconomical.
@tevzTVTevatronics
11 ай бұрын
You're right.
🙏𝙸 𝚊𝚖 𝚜𝚛𝚒 𝚕𝚊𝚗𝚔𝚊🎉𝚛𝚑𝚊𝚗𝚔𝚜