Great video! Once again rip rap is the best!

Rewatched! Love the Rip rap usage! Great video and content!

@dirty.diggers

3 ай бұрын

Thanks Aaron! You’re the man! Appreciate you 🙌🙌

Great work!

Been waiting for this one!!!

@dirty.diggers

3 жыл бұрын

I bet you have!! Lol hopefully you enjoyed it 🤙

Very nice job, well done! I do have some observations to share for what it’s worth… 13:57 That is probably the most expensive way of backfilling a culvert i have ever seen in my life due to the use of high quality road base for the entire fill material All of the jobs I’ve done we used unclassified fill material that was compactible for all but the last foot or so. Where I live in California Road base cost about $27 a ton and unclassified fill about 8 dollars a ton so you can save a Lot of money by just capping the job with road base The revetment on the outside is a good idea for sure. It will help your fill stay in place. Sure looks like the engineer specified far more corrugated. Metal pipe than the job needed could’ve saved a ton of money there, too

@dirty.diggers

8 ай бұрын

Yup I don’t disagree with you! We were following the specifications designed by the engineer. That’s the way it was desired to be completed, just happened to be a very deep ditch as well

@dirty.diggers

8 ай бұрын

Thanks for the input and watch though! Much appreciated 👍🏻

Hey wanted to let you know I stumbled across you channel when searching culvert installation. Great work! I have have recently started to video my novice use of my kubota excavator. Thanks for posting your video

@dirty.diggers

2 жыл бұрын

Awesome thank you Matthew! Glad you found my channel! Practice improves us all keep it up with your mini! 🍻

Thank you. A wonderful video.

@dirty.diggers

Жыл бұрын

Very much appreciated! Thank you for the compliment and subscribing 👌🍻🍻

beautiful

Really nice work! Most guys don't bother with the 1x3 or rip rap. Great job not cutting corners and ensuring this stays nice. Really great work Andrew

@dirty.diggers

3 жыл бұрын

Thanks Bryan! Better do the job once, the right way!! 🍻

@DieselandIron

3 жыл бұрын

@@dirty.diggers Oh heck yeah. It's shocking how much of the industry doesn't get that...

Love the Rip Rap being used.... it's rhe best. Great video!

@dirty.diggers

11 ай бұрын

Thank you for watching and the feedback! Much appreciated 🤙🍻

@aaronburford5701

11 ай бұрын

@@dirty.diggers love your videos.... learn so much... keep them coming!

@aaronburford5701

11 ай бұрын

Forgot to mention I enjoyed rhe skid steer work... operator is superb!

@dirty.diggers

11 ай бұрын

@@aaronburford5701 thank you! That means a lot appreciate it! Hard to get the content out on KZread, I try to get these longer videos out as much as possible. Should have one coming out in the next day or so finally! Lol if you have Instagram you can see all the more day to day stuff and quick videos there if you’d like too check that out. 🍻

@dirty.diggers

11 ай бұрын

@@aaronburford5701 haha just always trying my best! Thanks man

Looks good 👍

@dirty.diggers

4 ай бұрын

Thanks 👍

Looks nice! I like how you flipped the dirt out of the bucket. I’ll have to try that. Does this type of work require you to have any kind of license or anything?

@dirty.diggers

2 ай бұрын

Thanks! Appreciate that. Yeah flicking the dirt or other material like that is a technique that can be helpful to spread material out or sometimes if you can’t raise the bucket to Dump for various reasons. And yes for this job we needed to have a permit for the culvert and also one to have a lane closed on the road when trucks were dumping because it was a very busy road

Awesome!

@dirty.diggers

2 жыл бұрын

Thanks man! 🙌🙌🍻🍻

Nice looking job

@dirty.diggers

3 жыл бұрын

Thank you!! Appreciate that 🤙😄

Interesting how you use the dirt toss technique I like to push through toss at the end the back drag came out beautifully great work !

@dirty.diggers

9 ай бұрын

I find flicking it helps already it out. Pushing is good as well. I like a combo of techniques but what matters most is the end product 🤙 thanks for the comment and feedback appreciate it 👌🍻

Nice job.

@dirty.diggers

3 жыл бұрын

Thanks man appreciate that!! Welcome to the DDG!! 🤙

@camillecolombain1926

3 жыл бұрын

Keep up the work.

Looking good.

@dirty.diggers

3 жыл бұрын

Thanks Scruffy!! Hope all is well with you 😄

@scruffy6151

3 жыл бұрын

@@dirty.diggers doing good

@dirty.diggers

3 жыл бұрын

@@scruffy6151 glad to hear!

Very nice and perfection job you did there. But I was surprised that DOT would approve that small of culvert to be in that large of a ditch.

@dirty.diggers

2 жыл бұрын

Yeah it was very long as well like several meters longer then the driveway width. But it was all designed I just followed the specs.

@rontopping2048

Жыл бұрын

Plenty wide enough machine is 72 inches wide. Looks like 4 to 5 times that width

@angusblack9900

10 ай бұрын

I put quite a few culverts in here in Kansas. We always packed dirt in and capped it off with rock good job😊

@angusblack9900

10 ай бұрын

Very nice

Nice job guys 👍🏻

@dirty.diggers

3 жыл бұрын

Thanks man!! Really appreciate that 😄

@ConstructionMachineryChannel

3 жыл бұрын

@@dirty.diggers No problem

Interesting technique the way you toss the dirt forward and quickly back up. What is the purpose?

@dirty.diggers

Жыл бұрын

Just how I add a little more where I notice I need to. Also a way to shift a bit more material to one side if I need more there etc

Hey Andrew, what's your thoughts on the SVL 75 Skiddy ? I'm in process of buying the new 75-3 series and wondered if you have any thoughts on the upgrades Kubota did to your model on the 75-3 - Any feedback gratefully appreciated my friend :)

@dirty.diggers

11 ай бұрын

Hey Daniel! I am a huge fan of the Kubota machines in general like the mini excavators and skid steers. However to be totally honest I have not tried out a 75-3 yet. They look nice, I’ve heard the cab is better and supposedly a better venting system from the 75-2 which is one of the biggest cons that machine has. I would love to tell you more about it but I would have to run it for a while before I can give an honest assessment. Sorry I know not to helpful but in general kubota has been great equipment to own and operate 🍻

Dirty digger is the Man

@dirty.diggers

Жыл бұрын

Thank you! Appreciate that my man 💪🍻🍻

You weren’t kidding about getting that culvert video out😂 Good job Andrew🤙

@dirty.diggers

3 жыл бұрын

I had it uploaded just not published lol it was set to come out yesterday 😅 that why I laughed when I saw you doing a similar project lol

@gibsonlandscapeconstructio7984

3 жыл бұрын

@@dirty.diggers 👍i enjoy projects like that🤙 Did you have to get permits for that culvert job??

@dirty.diggers

3 жыл бұрын

Yeah the land owner got a permit for the entrance and I needed on for a temporary road occupancy

Forgive my ignorance, but what’s the deal on all the extra culvert on either side?

@dirty.diggers

2 ай бұрын

Haha not ignorant man, I thought the same thing! This was designed by an engineer and the town. I had to follow their requirements for culvert length. Wasn’t up to me lol.

@gabrielpearson

2 ай бұрын

@@dirty.diggers not meant as a criticism, just to be clear. I figured there was a good reason, and I’m sure the engineer had one.

@dirty.diggers

2 ай бұрын

@@gabrielpearson Yeah Exactly! If it’s an approved design and what the customer wants, as long as it doesn’t negatively affect us or anything else negatively, I have no problem doing it 👍🏻

That’s how you run a skiddy

@dirty.diggers

Жыл бұрын

Thank you man! Appreciate the feedback 🤙🤙🍻🍻

Curious to understand why u chose to swap buckets for the rip wrap? Was it visibility?

@dirty.diggers

3 жыл бұрын

Great question! The main reason was to avoid also scooping up the gravel I just spread on the driveway. That way I could grab the bigger stones and the gravel would fall through the bucket openings

@rontopping2048

Жыл бұрын

Easier to pickup RIP rap with tines no cutting edge. Also if he goes down to far it wont mix 2 materials together

Why would you use those metal culverts the only going to last about 10 to 15 years

@dirty.diggers

Жыл бұрын

I used whatever the engineer specs required including diameter, length and type of culvert. Wasn’t up to me

@bho6328

Жыл бұрын

Metal culvert are the stupidest thing I've ever seen when they fail and collapse nobody dig them up and fixes them they just put more dirt on it and then everything is backed up and flooded they should be outlawed

@irafair3015

Жыл бұрын

@@bho6328 That is exactly what happened to a culvert in front of my house I just bought and now water backs up to my foundation.

Painful to watch!!

@dirty.diggers

3 ай бұрын

Oh no, my world is crumbling, oh no