Installing a Bimini Top on my Pond Prowler/Quest Angler
Тәжірибелік нұсқаулар және стиль
It will be blazing hot in Las Vegas and I don’t want more skin cancer, so I installed a Bimini top on my Pond Prowler/Quest Angler. It was an easy installation that took just over thirty minutes and will be amazing on the lake. Thanks for watching! GET YOUR BIMINI TOP HERE:
Here is where to purchase your Bimini Top: amzn.to/3A01qSJ
#lakemead #fishinglife #pondprowler #questangler # biminitop #bassfishing #fishinglakemead #diy #boating #boatlife #lakemeadfishing #bassraider #sunshade #lakesun #lakeshade
Пікірлер: 24
That’s slick!!!!!
Cool
What's the part number you ordered for bimini top? I ordered what I thought was most narrow. It's to wide. I have the pelican 10e bass raider. Thanks for your time. Appears maybe you had to pull the support rods inward to accommodate the width difference.
@JadedAngler
9 ай бұрын
This is the one I bought: Bimini Top: amzn.to/3A01qSJ I did have to angle the bars inward…but it works and you really can’t tell. It’s really just to support it.
Besides being humorously nuts! Your pretty sharp. Love the bikini top. Great 2x6 board, winch idea.
@JadedAngler
9 ай бұрын
Thank you sir! Much appreciated!!!
Nice! Wanting to do this as well. I do have a question though... The Bimini top shows it is for boats between 54 and 60 inches wide. The Pond Prowler is 49.5 inches wide according to specs. Did you have to angle the support poles in? Wondering how this fit so nicely...
@michaelbarnes7086
9 ай бұрын
Scott Barnes here in Martinsville va. I ordered same bimini top as gentleman on this KZread channel. I have pelican bass raider 10e also. I'm going to install mine and will let you know how mine went.
Ordered this top, should be here in a few days. Did you just screw it into the plastic? Or did you use an anchor like a well nut?
@JadedAngler
Жыл бұрын
I used the heavy duty screws for the mount and I attached the nylon strap to an eyelet on a track mount.
I'm in vegas also and just picked one of these up. How has the bimini held up and have you had your boat out at Mead?
@JadedAngler
10 ай бұрын
The Bimini was awesome and I had it predominantly out at Lake Mead. You are gonna love your new ride.
Also. would you mind measuring the distance between your poles for me? ( width across) Thanks!
@JadedAngler
Жыл бұрын
Mine is 42 across for the mounting points. The poles do angle in, but it is not an issue at all. Once mounted, it operates perfectly!
What battery do you use?
How do you keep your seat deck stable ..the one in the front ??
@JadedAngler
7 ай бұрын
It just sits on my he rail. It’s sits between the two other partition and the weight keeps it in place.
May I ask the exact size /measurements of the Bimini you bought for this?I have a pelican bassraider 10 e. Wondering if this size would work. Thanks !
@JadedAngler
Жыл бұрын
This is the one I purchased and though it wider dimension than the pond prowler, the arms angle in. You would have zero issues with your BassRaider. amzn.to/3A01qSJ
@kane20seven
Жыл бұрын
@@JadedAngler thanks so much brother!
How do you keep the deck locked in?
@JadedAngler
7 ай бұрын
It just sits on top and is removable.
Does the top not interfere with casting?
@JadedAngler
Жыл бұрын
I can still stand on the deck and cast…or just unhook the two front straps and roll the top back if I want to have a seat.