INSTALLATION OF THE V2 IAG EZ-LIFT SOFT TOP ASSIST SYSTEM | IAG PERFORMANCE

Автокөліктер мен көлік құралдары

IAG step-by-step installation of the V2 EZ-LIFT SOFT TOP ASSIST SYSTEM
For Part# IAG-BDY-F1003

Пікірлер: 37

  • @thebigone022
    @thebigone02228 күн бұрын

    Thank you for the great video and amazing product. I just installed this and wow, it’s exactly what Ford should’ve included originally. Perfection!

  • @raustin679
    @raustin6798 ай бұрын

    Just installed this. Night and day difference. So much easier to lift to close and keeps back propped up for an added bonus. Nice work IAG!

  • @theiagchannel

    @theiagchannel

    8 ай бұрын

    Thanks for your support!

  • @anthony2558
    @anthony25582 жыл бұрын

    A world of a difference getting the top back up. This accessory has saved my marriage, lol. Lifting the top from the fully down position is now able to be done with one person, just one hand. My wife and I would get mad because we weren't lifting at the same time, the top would get twisted, the frame would scratch the roll bar. No more of that, the wife can sit in the truck and I can do it myself with one hand now. 🙏👍

  • @theiagchannel

    @theiagchannel

    2 жыл бұрын

    Glad we could help! Haha happy wife happy life!

  • @garretkom
    @garretkom Жыл бұрын

    Outstanding video. Extremely thorough!

  • @Battlebornbadlander
    @Battlebornbadlander2 жыл бұрын

    Just installed, works awesome so far! Good product guys.

  • @theiagchannel

    @theiagchannel

    2 жыл бұрын

    Great to hear! Thank you

  • @LMacNeill
    @LMacNeill Жыл бұрын

    Just ordered this kit, and I don't even have my Bronco yet. Should be here in a week or two, if Ford's shipping info is to be believed. Can't wait!

  • @mdm5215
    @mdm52152 жыл бұрын

    I installed using the video instructions (watch a step, pause, do the step, repeat...😂 Would have appreciated a PDF with words AND pictures; my brain apparently works slowly.....er, differently). When I tested the operation after completion, I gouged the hell out of the passenger side roll bar paint (never scratched it maneuvering the top without the kit, so I'm a little upset with the down-to-the-metal paint gouge). Does this indicate that I did something wrong with the install or do you think there might be something pulling the top towards the driver's side? Either way, suggestions to fix it? I'm afraid to put the top up now for fear that I'll keep digging into the paint. 🥺 (Shoulda put the paint protection film I also ordered on first, but I don't think it would have changed anything... Sumbish is DEEP...)

  • @thatguitarist25
    @thatguitarist255 ай бұрын

    This is such an amazing product. I bought a used bronco and it was missing the arm to hold the trunk open so I just got this instead. Instead took maybe 15-20 minutes max and not I can actually use my trunk

  • @micahrichey5335
    @micahrichey5335 Жыл бұрын

    Great product! Why was this not included with the factory soft top?

  • @idkidc3192
    @idkidc31922 жыл бұрын

    When will you post a other video about the 22 wrx

  • @TheChuck1960
    @TheChuck19605 ай бұрын

    I’ve had these on my Bronco since they came out and I’ve had issues with my top and both times they blamed these. I know it wasn’t these but those bastards fought me all the way and finally gave in and gave me a new top after calling this company. They did tell me if I ever have another problem with my top and I have these on, I’m on my own,they will do nothing.

  • @eliblanton6604
    @eliblanton6604 Жыл бұрын

    That part at the beginning, there’s no instruction on what to do if we find them not in contact. One of my passengers side dowels is not in contact with the soft top mechanism

  • @carlawainwright5349
    @carlawainwright5349 Жыл бұрын

    Tried to open my top all the way after installation and now the top snaps itself back to half way while driving. It was not really locking before I took off but I thought it finally clicked in place. Hit a small bump and it slammed back to the half way position. What can possibly cause this?

  • @theiagchannel

    @theiagchannel

    Жыл бұрын

    It does sound like something may not be latched correctly. The latches on the soft top are adjustable. If you would like to reach out to our tech team at support@iagperformance.com they can help walk you through it!

  • @alix1493
    @alix14934 ай бұрын

    Will this fit the 24my?

  • @garretkom
    @garretkom Жыл бұрын

    Any issues if I want to completely remove the entire soft top from the Bronco after installation of these struts?

  • @theiagchannel

    @theiagchannel

    Жыл бұрын

    Nope, the struts are attached to the soft top frame, so they will go with the soft top when you take it off.

  • @wallycunningham5090
    @wallycunningham5090 Жыл бұрын

    What does "fully in contact with centering and leveling dowel" mean exactly? Mine is about 1/4" above the front dowel.

  • @patfeher

    @patfeher

    Жыл бұрын

    The front dowel should be seated fully on the slot cut in the bracket as shown at the :30 mark in the video. So you will want to loosen the 3 bolts slightly and push down on the top to seat the dowel before tightening the bolts back up.

  • @wallycunningham5090

    @wallycunningham5090

    Жыл бұрын

    @@patfeher Thanks! That may explain the issue I've had with the top slightly scraping the D pillar.

  • @colinbrennan8918
    @colinbrennan89182 жыл бұрын

    Does it matter if I accidentally connected the thicker end of the hydraulic arms to the bottom? Just rewatched this and saw he connected the other way…

  • @anthony2558

    @anthony2558

    2 жыл бұрын

    I'm sure it matters some what, not sure how much though. It's easy to get them off. Look at the end of the shock, at each end where the pivot ball goes in. The back side will have a black metal U clamp. Use a small flat head screwdriver, pry it away from the shock, don't need to remove it, 1/4" will do. Then pull the shock off the pivot ball.

  • @theiagchannel

    @theiagchannel

    2 жыл бұрын

    It depends on the kit that you have. Between our V1 and V2 the struts are different so they require a different installation.

  • @tmcnicho

    @tmcnicho

    2 жыл бұрын

    @@theiagchannel What is different about the V2 struts?

  • @miggysmallz6052
    @miggysmallz60525 ай бұрын

    Your site says this kit will not fit on the 2023 models. Is this correct? If so what’s different on the 23 vs the 22?

  • @theiagchannel

    @theiagchannel

    5 ай бұрын

    The 23+ model has a redesigned, heavier soft top frame. The heavier top prevents the system from lifting all the way. We are currently updating the kits to work with the 23+ models and expect to release them soon.

  • @hjchamp04
    @hjchamp046 ай бұрын

    Any promos or discount codes available?

  • @theiagchannel

    @theiagchannel

    6 ай бұрын

    Not at this time but we should have something soon!

  • @hjchamp04

    @hjchamp04

    5 ай бұрын

    Bought on from Amazon and installed it on my new 2024 soft top Big Bend. There is was some difficulty aligning the driver side bracket but it got it done. The trunk opens slow and I have to assist it up. Not sure what the issue is

  • @theiagchannel

    @theiagchannel

    5 ай бұрын

    @@hjchamp04 Reach out to us at support@iagoffroad.com and we would be happy to assist!

  • @user-zz6qq3zi8n
    @user-zz6qq3zi8n Жыл бұрын

    Bought your system. It’s very nice but no instructions.

  • @theiagchannel

    @theiagchannel

    Жыл бұрын

    Thanks Rodger! The QR code inside the box will lead you to our instructions page and this video.

  • @user-do5gw3yh9e
    @user-do5gw3yh9e Жыл бұрын

    Tried this and the mount on the driver side or “left” bracket does not align Worth shit..

  • @theiagchannel

    @theiagchannel

    Жыл бұрын

    We'd be happy to help. Give us a call or email support@iagperformance.com with some pictures and we'll help you get to the bottom of it.

Келесі