Just got mine and im very pleased with these, as their pricing an ease of installation is great. Thank you for providind a helpful install video.

I attempted to comment yesterday, but for some reason, it did not take. Am I able to cut, or drill these? Reason being is that I ordered them for my 2024 Forester and they are blocking the blind spot monitoring and cross traffic lights on the side view mirrors. This is very dangerous. Please advise.

Easy as π. Exactly as shown. The reason you have to slowly step close the window is it overrides the window safety feature that prevents someone's hand/fingers/whatever from getting pinched in the window which would reopen the window if it senses an obstruction. The obstruction is the defectors, which once in place for a while, won't trip the sensor. The rear window clips remain in and support the deflectors in their installed position. Just peal the rubber seal down as shown and the clips will push right into position. Make sure once the deflectors are in that they are in all the way. You can push them further up with the window closed using the palm of your hands. Also make sure when installing the front deflectors that the outer seal hasn't been folded over as you wrestle it into position. A tiny bit tricky but not really too bad.

@sparklinesinc

Жыл бұрын

Hi, Thank you for the comment. We see that you`ve viewed a video on how to install Shatterproof Side Window Deflectors In-Channel window visor (with fastener). Please note, that you can see the main product installation steps below: - we strongly recommend installing the deflectors at temperatures between 59°F/15°C and 77°F/25°C; - it`s very important to clean the grease off the installation surface with a supplied alcohol wipe, this will provide better adhesion of the tape to the car body. - car windows should be closed for 24 hours after installation according to the instructions. If your car safety features don't allow to close windows we ask you to do the following: 1. Adjust deflector's position by carefully pulling it outwards, as it's written in the instruction; 2. Rise the window until it touches the deflector. 3. Carefully pulling the deflector outwards, roll up the window with abrupt movements. And then leave the window closed for 72 hours. Besides, kindly note, that all our products have a limited lifetime warranty. That`s why if you`ve purchased the item from our company and have any issues with it, then please, reach us on customerservice@sparklinesinc.com and send the details regarding the problem there. Then we`ll investigate the issue and assist you. Best regards, Customer Service Support Spark Lines, Inc.

@mattperkins9005

29 күн бұрын

​@@sparklinesincone thing to note at least on the 2024 Pathfinder. The rear window deflector doesn't cover the opening well because it doesn't follow the contour of the slanted glass.

@joedesalvo3316

7 күн бұрын

@@mattperkins9005 I just got these for my 2023 pathfinder... should I not install them?

@mattperkins9005

7 күн бұрын

@@joedesalvo3316 if you just use the front ones for the more than the rear ones. I would only use the rear if you know there won't be liquid running over the windows. Just use for heat venting.

Someone do a voiceover, some of use can't read that tiny font.

Why is it only 1 window I have in my 23 tacoma is bouncing back

@sparklinesinc

2 ай бұрын

Hi! We apologize for any inconvenience you've experienced. To better assist you with the issue you're facing, we kindly request that you reach out to us at customerservice@sparklinesinc.com and provide us with detailed information about the problem, along with any photos illustrating the specific issue you encountered. This will enable us to better understand the situation and provide you with appropriate guidance and support. We are committed to resolving this matter to your satisfaction and appreciate your patience. Best regards, Customer Service Support Spark Lines, Inc

Can I get my windows tinted after installing these or should I install after I get my windows tinted?

@sparklinesinc

Жыл бұрын

Hi, Thank you for the question. Please note, that there is no difference when you get the windows tinted - before or after installing deflectors but we recommend that you do not open windows for 72 hours, do not wash your car, and keep the speed limit also for 72 hours after installation. Best regards, Customer Service Support Spark Lines Inc.

@backwoodsblake

Жыл бұрын

Some shops prefer no rain guards on if they're tinting your windows because it makes it easier for them to measure the outside of the window before they install it on the inside. It can still be done with the rain guards on though.

@mla7695

Жыл бұрын

@@backwoodsblake Noted! Thank you!

Where does the clips go???

@sparklinesinc

2 ай бұрын

Hi! We apologize for any inconvenience you've experienced. To better assist you with the issue you're facing, we kindly request that you reach out to us at customerservice@sparklinesinc.com and provide us with detailed information about the problem. This will enable us to better understand the situation and provide you with appropriate guidance and support. Best regards, Customer Service Support Spark Lines, Inc.

Do the fasteners remain on after the installation?

@sparklinesinc

Жыл бұрын

Hi Hank, Thank you for contacting us. We see that you`ve viewed a video on how to install In-Channel Shatterproof Side Window Deflectors (with fastener). Kindly note, that the set shown in the video includes 2 front window deflectors, 2 rear window deflectors, instruction manual, plastic blade (1 piece), alcohol wipe (2 pieces), fastening bracket (4 pieces). Fastening brackets are designed for the rear deflectors and they remain in the channel after the installation. Here you can see the link to the installation manual as an example - drive.google.com/file/d/12IL1OUW_uRQdIHprFwNhL-I2WBJDYItT/view (Complete Set № 1) Please note that if you have any other questions regarding the product please, reach us on customerservice@sparklinesinc.com and we'll help you. Best regards, Customer Service Support Spark Lines, Inc.

After 72 hours windows still don’t close properly, will be returning.

@sparklinesinc

14 күн бұрын

Hi @ultraco.6798, If you`ve purchased this item from our company and have any issues with it, then please, reach us on customerservice@sparklinesinc.com and send the details regarding the problem there. Then we`ll investigate the issue and assist you in the most appropriate way. Thank you! Best regards, Customer Service Support Spark Lines, Inc.

Horrible video of the installation process. You don't even explain how the metal fasteners are placed or their purpose.

@sparklinesinc

Жыл бұрын

Hi Alex, Thanks for the comment. Please note, that this video is universal for different car models and illustrates the installation of in-channel window deflectors (with fastener). Besides, if you have any questions related to the product installation, then please, reach us on customerservice@sparklinesinc.com, send your car details: year/make/model/trim and more details regarding your question there. Then we`ll help you. Best regards, Customer Service Support Spark Lines, Inc.

@o-98283

11 ай бұрын

@@sparklinesinchey, can you drive your car right away after installing the wind deflector or do you have to wait for certain time?

@sparklinesinc

11 ай бұрын

Hi @o-1637, Thanks for the question. We recommend to wait at least one hour before driving after installing the window deflectors but it is important not to open windows for 72 hours, do not wash your car, and keep the speed limit also for 72 hours after installation. Best regards, Customer Service Support Spark Lines Inc.

This video is useless, you don't show the front installationi of what to do vs what not to do they both look the same. You don't show which way to put the clips in the back window. This entire video is uselss, as are the instructions that came with these.

@sparklinesinc

14 күн бұрын

Hi, Thank you for the comment. We see that you`ve viewed a video on how to install Shatterproof Side Window Deflectors In-Channel window visor (with fastener). Please note, that you can see the main product installation steps below: - we strongly recommend installing the deflectors at temperatures between 59°F/15°C and 77°F/25°C; - it`s very important to clean the grease off the installation surface with a supplied alcohol wipe, this will provide better adhesion of the tape to the car body. - car windows should be closed for 24 hours after installation according to the instructions. If your car safety features don't allow to close windows we ask you to do the following: 1. Adjust deflector's position by carefully pulling it outwards, as it's written in the instruction; 2. Rise the window until it touches the deflector. 3. Carefully pulling the deflector outwards, roll up the window with abrupt movements. And then leave the window closed for 72 hours. Besides, kindly note, that all our products have a limited lifetime warranty. That`s why if you`ve purchased the item from our company and have any issues with it, then please, reach us on customerservice@sparklinesinc.com and send the details regarding the problem there. Then we`ll investigate the issue and assist you. Best regards, Customer Service Support Spark Lines, Inc.

@sandycrabtree2806

4 күн бұрын

These block the view of the blind spot monitoring lights on the side view mirrors. Can these be cut or drilled so that the lights are visible to the driver?