Sweet ride ,hope to see more of your videos. Keep up the great work everyone ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆

Looks like you are having some fun with that little bike!

@MotoMouthMoshe

3 жыл бұрын

I am!

Tool 💪 beste bend!!!

Nice!

Nice vid man! I got the same kit but I broke the piston rings trying to get the piston through the cylinder.

@RemcoStobbelaar

3 жыл бұрын

How the fuck

@matijajerman2005

3 жыл бұрын

@@RemcoStobbelaar yeah you have to be very careful, its super easy to screw it up...

@r2dieter646

Жыл бұрын

Same…

@Joschi746

15 күн бұрын

Same

I have a tomos flexer and yesterday I got my airsal 65cc and a dmp high compression head, but the exhaust I bought for it was for A3 and I think I have a35 so I am wondering what exhaust I should buy. I want like a ”sleeper” exhaust that doesnt get so much attension but at the same time have a good performance.

@MotoMouthMoshe

3 жыл бұрын

kzread.info/dash/bejne/jH9swcGig9rFXdo.html

Could please somebody explain: This engine does not "breathe" with the help of a mixture-overpressure created in the crankcase, but looks to be naturally aspirated, like "normal" 4stroke-engines. Is it really possible? Shouldn´t there be huge disadvantages to aspirate a 2stroke "normally", without any pressure filling the cylinder with mixture? Where can I find something about such aspirated 2strokes ??? And does this engine (used to ) have a dedicated lubrication systen, unlike other 2strokes ??? Where can I find something out, without registering first in a 2strokes-forum? Thank you á priori for all answers!

@MotoMouthMoshe

3 жыл бұрын

Just research "2 stroke engine - theory of operation" and you'll get a bunch of material to study.

@klausbrinck2137

3 жыл бұрын

@@MotoMouthMoshe Is that correct, that your air-intake leads directly to the cylinder, instead of the crankcase? I have already read a lot, not even the firm Tomos itself explains how that could be possible... I suppose this mode of function, if real at all, has many disadvantages: My 49cc cheapo china-4stroke used to reach over 70kph just through manipulating the variator-reach (3.2hp, 172lb for bike, and another 170lb for me)... A 70cc 2stroke like yours should easily reach over 100kph without any modification, and not only 69kph (43mph you said?)... I try to understand...

@MotoMouthMoshe

3 жыл бұрын

@@klausbrinck2137 My Tomos moped specifically has a reed valve intake setup, but not all are like this. Again, I think you'd be better served just reading up on theory of operation (plenty of material out there) rather than trying o figure it out here. The top speed of the vehicle is not a function solely of power, but also of weight, gearing, aerodynamics, etc. etc. so the scooter vs. moped comparison isn't really valid.

@Andre_Thomasson

2 жыл бұрын

A 2 stroke oses the pressure of the piston going down to push mixture fron the crankcase through the ports and up into the cilinder, the pipes have these weird expanding shaped to provide backpressure because withour backpressure alot of the mixture would simply leak into the exhaust

does exhaust fit the original one or you need to do some work

@MotoMouthMoshe

3 жыл бұрын

This one needed some work.

In my kit set i didnt get head gasket and where i bought it they said i dont need it🤔

@xxxgregaxxx

3 жыл бұрын

You dont need it....i have tomos a5 colibri with airsal 65ccm kit and it wasnt included in package, i asked my friend mechanic and he said if head where spark is pluged is in good condition then you dont need it

@oni8979

3 жыл бұрын

@@xxxgregaxxx i also got that information, but wasnt sure uf its true

Do you Changed a crankshaft or you ride this kit on clasic crankshaft

@MotoMouthMoshe

Жыл бұрын

Stock crank. This kit is only the top end of the engine.

Got the same cyl, mine does that metalic sound aswell…. Is that normal? I‘m kind of worried. 😬

@MotoMouthMoshe

Жыл бұрын

Never had a problem.

@flub05

Жыл бұрын

That is a normal problem for tomos, it is just your clutch, nothing to worry about and nothing to do about it.

What is the correct ring gap? Great video by the way!

@uroskompara4551

3 жыл бұрын

0.25 mm for this kit..

Whats the top speed and how are you satisfyed with the exhaust?

@MotoMouthMoshe

3 жыл бұрын

I'm GPSing at 42-43mph on flat ground. I'm still fine tuning the jetting, right now experimenting between #74-76. Exhaust is of excellent build quality and looks great. I have nothing to compare it to except stock in performance though. I haven't tried other types yet. I do like the Estoril sidebleed and may buy one just to try.

@vitobencic2165

3 жыл бұрын

@@MotoMouthMoshe glad to hear it😁👍nice results out there! In Slovenia the homoet p4 is one of best exhaust that u can put on your tuned moped it just produces big amount of power at high rpm's....got myself 18mm carb from chainsaw just need a cilinderkit😀 Thanks for answer! Stay fine👍

@MotoMouthMoshe

3 жыл бұрын

@@vitobencic2165 kzread.info/dash/bejne/ZIucsrWFh5yrkc4.html

Whats that blue stuff you are putting on the intake manifold?

@MotoMouthMoshe

9 ай бұрын

Loctite

@mihabosevski1685

9 ай бұрын

@@MotoMouthMoshe thank you so much🙏🙏

what u lube those studs with

@MotoMouthMoshe

3 жыл бұрын

Anti-seize. Permatex brand.

Can i put on TOMOS A3 SL

@Joschi746

15 күн бұрын

Yes

2:20 how did you drop the engine? Just remove one of the bolts?

@MotoMouthMoshe

2 ай бұрын

Yes, remove front mounting bolt and loosen the rear.

@maxbasener

2 ай бұрын

Thanks a lot! I got it done :) Do you mind sharing the sprocket details with me? Now I have 26-24. It is alright but kinda slow when driving off.

@MotoMouthMoshe

2 ай бұрын

@@maxbasener my sprockets were stock. I sold this thing 2 years ago so I didn’t record those numbers.

R.i.p crankshaft

@MotoMouthMoshe

3 жыл бұрын

Nahhhhh

Stavio bih na moj Tomos A3MS Sprint Airsal 44mm sad imteresuje me sta sve treba promeniti da bi isao kako treba i da ne dodje do neke havarije.Imam Karburator 14-12P.Da li treba da stavljam 16-16 karburator i sta jos bih trebao menjam, ako neko moze da mi navede mnogo hvala u napred!

@miljan1799

3 жыл бұрын

Za tu naxogradnju ti treba preko 700€ neisplati se

@lovreorlovic

Жыл бұрын

Ne treba preko 700.. Karburator stavi SHA 1616 ili 1515 i proširi prirubnicu

press the rear break when revving.

@MotoMouthMoshe

3 ай бұрын

Why would you do that?

@edizaplatic2784

3 ай бұрын

@@MotoMouthMoshe so the wheele doesn't speen. I have the same bike at home

@MotoMouthMoshe

3 ай бұрын

@@edizaplatic2784 all that does is stress the clutch. It’s pointless

@edizaplatic2784

3 ай бұрын

@@MotoMouthMoshe then make/buy the standing leg which puts the rear wheele up or stop playing with does child bikes and buy APN 4/6. it hurts me to see the poor bike

How many cubics is 42mm

@marcalan1198

3 жыл бұрын

70cc

@uroskompara4551

3 жыл бұрын

42mm is 60cc for Tomos.

@matijajerman2005

3 жыл бұрын

depends on the bore, but 60cc for tomos

Top speed?

@MotoMouthMoshe

Жыл бұрын

kzread.info/dash/bejne/ZIucsrWFh5yrkc4.html

a ispuh pase direkt al je kej predelav

haha old video hope you fixed it because RIP airleak at the gasket ... does not fit

@MotoMouthMoshe

2 жыл бұрын

Fits fine. Thousands of miles on it.

Noisy cylinder, typical Airsal, with rattling pistonrings

@flub05

Жыл бұрын

That is the clutch, not the pistonrings

Mulac okrenuo glavu naopako pa se predomislio ha ha

@miloshshomymura1448

3 жыл бұрын

isto kao i sto si ti neki Dragan,predomislio se pa si sada Ljiljana :)

Музыка ужасная(((

Maingay nmn

f*king guitar sounds

bro the music ruins the vid

@MotoMouthMoshe

3 жыл бұрын

Eric Bärtsch If you think Tool ruins anything, my advice is to seek mental health counseling ASAP.

@ericbartsch8029

3 жыл бұрын

@@MotoMouthMoshe no

@matijajerman2005

3 жыл бұрын

@@MotoMouthMoshe 😂