I have to say, I just got the paddle replacement and it works like a charm! It just saved my Odin speed loader!! Thank you so much and keep it up!!! you rock!!

@DJMitch117

11 ай бұрын

Thank you so much!!!

Thanks for the video this helped me out so much i was going to wing it but i found this video because i bought ur item off ebay!

@DJMitch117

4 ай бұрын

You're welcome! I'm happy to help

I thought I broke my Odin speedloader by cranking it too hard too many times and while there is wear on the clutch teeth, tightening the nut was all I needed to get it working again. Great video!

@DJMitch117

4 ай бұрын

I'm very glad I could help!

so lets get this straight. this man not only: shows you how the speedloader works how to adjust the clutch explains the difference between cheap&expensive tells you how to replace the busted paddle wheel provides his own (next day and i'm sure i ordered it at night) but he also shows you how to configure it properly, to not need to buy as many replacement parts from him to keep your speedloader epm 1 mag springs are a nightmare! i can't get them to fill all the way up at a comfortable clutch setting so i'll speedload the rest, they do have feeding issues so i might just run them as far as the new clutch settings allows. thanks for the part, knowhow and fix

@DJMitch117

6 ай бұрын

Thank you for the kind words!!

@smartcctvsystemsuk5501

4 ай бұрын

Thank god for pointing this out, I've been struggling so bad with EPM mags and was about to throw the speedloader in the bin. I really like the fact that epm mags have the red dot to indicate fill size, any ideas of other mags?

Ah you made an updated instruction, cool :) Sub+1, great tech contenct :)

This vid was great just got our kit an son overwound loader on first few mags. What’s your website for replacement wheel pls we got made in china one. For 15. No instructions. Now I know how to set up. Thanks for vid 👍👍👍

@DJMitch117

8 ай бұрын

Thanks! I sell mine here: www.ebay.co.uk/itm/115122187223

Just ordered 3 pcs of this as it's been what I've been looking for since my well "Burntout" however not sure on the progress of it. Would like to ask for your help if you have any visibility on it. Love the product and great vid

Hello, just placed an order. I chose the carbon version. I want to load tm akm gbbr mags and need a wheel that can handle the stress. Right choise?

@DJMitch117

5 ай бұрын

I would say so! But i have not tested with these mags, but I can't imagine there are any mags out there that are more difficult to load than EPM 1s. But if these dont meet your expectations, let me know, and we can sprt something out! I'll have this dispatched tomorrow for you. Thank you! - DJM

@DJMitch117

5 ай бұрын

@vincentduinkonijn5875 yes! Dispatched 23rd of February. As it's an international order it may take longer than expected. Get in touch via eBay if you need more assistance 😎

@DJMitch117

3 ай бұрын

@@vincentduinkonijn5875 I just sent you a message on eBay!

@vincentduinkonijn5875

3 ай бұрын

@@DJMitch117 was able to read your message in the mail. On ebay message not visable. I have sent you a message on ebay.

I know this is old, but what size is the o ring mine fell out or something, and now BBs just fall out and never hold. Even just trying to load a mag only does about 140 of 190/220 round mags I have and taking it out drops like 6 BBs

@DJMitch117

2 күн бұрын

@@sniper321fireI don't have the o-ring to hand, but it'll have an internal diameter of just below 6mm if that helps

@sniper321fire

Күн бұрын

@DJMitch117 ok, I'll just get some and see what works. Thanks for the information though

Did you test these on gbbr mags with adapters?

@DJMitch117

Жыл бұрын

I have not, but if the GBBR mags + adapter work with a stock Odin, I don't see why this wouldn't work also.

you should sell the file to print, cause i live in brazil and i can't get it through ebay uk

@DJMitch117

17 күн бұрын

@@R8.N8I'm pretty sure I ship worldwide! I'll have a look

@DJMitch117

17 күн бұрын

@@R8.N8 does this work? www.ebay.com/itm/116064148831?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL.TOPIC%26ao%3D1%26asc%3D20240315173020%26meid%3D762296b9b0c94f72985fc092391c8b8c%26pid%3D102069%26rk%3D1%26rkt%3D1%26itm%3D116064148831%26pmt%3D1%26noa%3D1%26pg%3D4375194%26algv%3DRecentlyViewedItemsV2SignedOutMobile&_trksid=p4375194.c102069.m5481&_trkparms=parentrq%3Acd2ae4a51900ab9d6d51d366ffff843a%7Cpageci%3A6f121af3-4620-11ef-99ef-7eebbfc075f4%7Ciid%3A1%7Cvlpname%3Avlp_homepage

@R8.N8

17 күн бұрын

@@DJMitch117 this one worked bro, thank you so much, just bought it

You can't know if a magazine is loading to max capacity untill you actually count the BBs loaded by dumping the BBs into a tray to count. ive found this Odin Sidewinder only loads to 65% of the max capacity before the clutch slips, fully tightened

@DJMitch117

5 ай бұрын

Counting the BBs is one way, or you can load using the sidewinder, then try loading more BBs with traditional speedloader. With a transparent pistol speedloader (like what I use in the video) it's possible to see how many more BBs the mag accepts after using a sidewinder. I cover this at 13:35.