This is the channel that nobody saw it coming but we needed the most. Thanks for the video !

Friendly reminder, before installing a new clutch friction plate, first soak it in oil so that when you start the engine, the clutch friction plate doesn't burn.

@Hunter.1999

10 ай бұрын

It's pre-lubed dude

@damaihati7151

10 ай бұрын

Please read the service manual. Written notice: If new dry friction plates and steel plates are installed, apply engine oil to the surfaces of each plate to avoid clutch plate seizure.

@sivakondiparthy2074

10 ай бұрын

First a fall it's slipper you don't need to lube it's pre lubed

@Hunter.1999

10 ай бұрын

I'm a service manager @ Honda two wheelers 😅

@pranavjs

10 ай бұрын

​@@Hunter.1999sure that for every manufacturer,that the plates will be pre lubed? Or is it just for honda?

I was searching this modification video over 2 years now. Thank you

@damaihati7151

11 ай бұрын

Where do you come from sir?

@ARKIONX

11 ай бұрын

I’m from Bangalore

@lyricshub8421

10 ай бұрын

I'm also searching for from 2 years

@KurhaediHartoko

10 ай бұрын

@@lyricshub8421 So you intend to install this slipper clutch? Or have you installed it? Waiting for a review from you

Well thayz called a complete informative video not like other youtubers calling themselves rider wider etc and not even giving the proper details,,, because they dont even know themselves..... Thanks for the knowledge full video❤❤

Really, I appreciate your work, not like other so called riders who don't even give basic understanding of all these things. Good work bro , keep making these type of content 👍😊

Music is too loud and voice is low a little to hear. Anyhow amazingly helpful video thank you brother

Great video man! nicely explained and straight to the point. would be great if the music is little mellower. also is it fine if you rev-match when you have a slipper clutch? whats the difference between rev-matching and engine breaking? isn't both effectively same?

@damaihati7151

10 ай бұрын

By definition, a slipper clutch allows the clutch to slip a predetermined amount when gearing down. The main purpose of this is to allow the next gear down to engage without the sudden introduction of engine braking that you’d normally get at high revs. By slipping, the slipper clutch gives a more progressive action to the gear down process making changing down gears smoother. Rev matching, also known as throttle blipping) was specifically designed to do a similar process before slipper clutches were introduced. For the most part, and especially for road riding, rev matching is no longer required at all. However, for racing and due to the continuous peak revs used there, rev matching can still be a benefit. Although this is not done manually anymore - an electronic component call the auto-blipper performs this function so that the rider no longer needs to reduce pressure on the throttle handle (potentially losing front braking efficiency) to blip the throttle during down changes. The rider simply starts pushing/pulling (depending on gear shift mode) on the gear lever, the electronics sense the change in gear coming and blips the throttle for the rider. So for road riding, it is not required. For racing, it depends on whether you have an auto-blipper or not.

@hash2shyam

10 ай бұрын

@@damaihati7151 thank you for the prompt response . i own an adventure 390 and it has slipper clutch. Whenever i want to downshift, I blip throttle a bit and downshift simultaneously leaving the clutch lever (which is rev matching i guess). I do this to reduce the speed of the bike as well instead of braking. This make the downshift smoother and shifting gear almost inaudible. So just want to know this method downshifting is not bad for the engine while it has slipper clutch? Thanks

Most valuable video for pulsar lovers ❤❤

Ktm duke 200 and ns 200 share same clutch means i can install slippers clutch in duke 200 happy ❤❤❤❤

@harshusvlogs24

11 ай бұрын

Yes you can 👍🏻

@johnck8707

10 ай бұрын

Ya its same but its costly 😅

@kankit230

10 ай бұрын

Yes you can have been usin this for over 6 months

@damaihati7151

10 ай бұрын

​@@kankit230Does the clutch handle feel lighter, sir?

@kankit230

10 ай бұрын

@@damaihati7151 yea noticable lightness

Perfect content man i got recommendation from youtube watched all your videos from morning bottom of my heart your are under rated i useally watch spourtztourer from now im waiting for your videos every week does this slipper clutch fits for ns 200 2021 model thanks in advance.😊

@ARKIONX

11 ай бұрын

Thank you so much. I’m glad that you liked my content. Speaking of slipper clutch, yes it fits all NS & RS models which were launched from 2017. Only BS3 models might have some problems.

@sivakondiparthy2074

11 ай бұрын

@@ARKIONX thanks for replying and my suggestion is that try make a video on every weekend i support you man.

U increase your front suspension height true😊

hi bro first time I'm watching your videos I'm so impressed make doing more videos bro ,when i have some doubts i will message to you please reply bro thank you

As an owner of NS200 I really enjoy watching your videos, This video definitely helped me and I'm planning to install a slipper clutch in my vehicle 💯🔥 Keeps mods and builds videos coming 🫣

N250 comes wid 5 gears ..& ns200 with 6 ..? doesn't effect

@naveenpinto4574

10 ай бұрын

No

Please also make a long term review of this modifications in your clutch. Subscribed 👍

@ARKIONX

11 ай бұрын

Sure 👌🏻

Hey there can u please make a video on carburetor tuning in ns 200 old models?

Can i install it in my rs200 ? And how was your experience while using slipper clutch? Whether it is good or bad?

Hi bro.. Did you feel any below difference after installing the slipper clutch? 1- slickness in gear engagement? 2- delay in gear engagement? 3- throttling delay after rolling movement to throttling? 4- Loose clutch cables after installation?

Can I install in ns 160

Can we install ABS on NS200 2017 model

@akshayveralkar4611

5 ай бұрын

yes but will cost approx 30 to 50k

You didn't mentioned the after problem of clutch adjustment

Can i fit in 200ns bs3

Hi Bro, can we install this slipper clutch in Pulsar ns 160 bs4??? Your response is much appreciated.

@ARKIONX

11 ай бұрын

Hi 👋🏻! Unfortunately I haven’t checked the size of its hub compared to inner hub, and moreover I think it might cause issues with clearance if you install it in ns160. However ,if you have access to local spare parts stores near by, you can always take your clutch basket and compare its dimensions with the slipper clutch unit and then make purchase decisions accordingly.

Please make an video on abs installation for non abs bs4 ns200 bike

What's Your Review Now And This Is Worth And Suitable For RS200 BS3 ?

Hi bro I have one doubt n250 has 5 gears and the n250 clutch comes with only 4 plates and 1 friction plate by this plates we can run ns 200 without any problem

@Max_throttler77

7 ай бұрын

yes bro also my concern on nmber of plates are less in n250

Bro how was the gear shifting & ridding comfort is there any advantages like milega, pickup..?

@damaihati7151

11 ай бұрын

Engine braking is not powerfull as before

@abhishekshrivastav3825

10 ай бұрын

​@@damaihati7151Thanks for this very very important information brother. I almost made up my mind to install this but now it looks like gaining something at the cost of losing a great feature. Engine braking in Duke 200 is very strong and it very much required in order to handle the type of acceleration Duke provides. Can't imagine how would I slow down my Duke with less engine braking than before. Can you please provide a lump sump figure like how much in percentage the intensity of engine braking is decreased after installing slipper clutch. It would be of great help before taking this decision as once it is done it would be a new area to learn how to rely on wheel brakes only if the there is less engine braking.

Bro i am having RS200 BS3. Will it work for it??

@ARKIONX

10 ай бұрын

Yes 🙌🏻

Can install as200

@ARKIONX

10 ай бұрын

Yes

man you should start your own accessories shop, if you have this level of skills.

if possible can you give me long time riview for slipper cluch in rs 200 is there any problem ocure for engine

Bro i’ve a doubt ns has 6 speed gear and n250 has 5 so is there any issue for 6th gear after installing slipper clutch

@ARKIONX

10 ай бұрын

No issues bro.

@Sunilkumar-vg1kf

10 ай бұрын

@@ARKIONX which is 6 plates required for ns bro. N250 has 5 plates so i’m confused how it happens. Cause i don’t want to spoil my engine i need proper knowledge about this.

@Max_throttler77

10 ай бұрын

@@Sunilkumar-vg1kfyes right

@Max_throttler77

10 ай бұрын

@@KurhaediHartokoso its safe for higher rpm like stock clutch assembly of ns

Thanks man I was searching this for long time , can you make a video on authorised front usd forks of bs7 to bikes bs6 and lower models than that and ? also gear shift indicators authorised ones

Please make video of installing duke 200 chain sprocket on ns200

Is All 6 gears operated or not?? I think Last 6 th gear is not working 🤔🤔

@ARKIONX

10 ай бұрын

It’s working perfectly 👌🏻

Can we install n250 slipper clutch on n160 and why does n160 has 3 springs does it have slipper clutch pre installed ??

Can we use N250 clutch housing as well?

Any performance drop?

Sir, can Xpulse 200 4v can have a slipper clutch? Can you do some research and tell me?😢

I can do this in My AS 200 ❤️ You are awesome brother 🙇🏻‍♂️🙏🏻

@uniquerider694

10 ай бұрын

Yes bro you can . M

Service center members will our bike slipper clutch ?

Where can we get the slipper clutch ?

@ARKIONX

10 ай бұрын

You can get it from any authorised bajaj spare parts store/ service centre.

Hi,Bro mine was rs200 bs4 i might be confused why you don’t use the outer hub of the assembly is there is any issue. Why because we replace the clutch after 30to40k km once on that time changing the full assembly is better than changing the inner unit?? That’s why asking your reply helps lots

@ARKIONX

10 ай бұрын

Hi bro! I have explained the reason why we cannot use the inner basket of N250 on NS200 in my review video on slipper clutch. kzread.info/dash/bejne/a6th1Kyahq26fdY.html

Hi does your ns200 after using n250 clutch assembly has any issue till date ?

Can I install a slipper clutch on my 200NS (2013 model year)?

Have a question...as an owner of bs4 rs 200 ...it has 6 feet gearbox but n250 and f250 has 5 feet units so how can this go as a direct fit ....answer needed admin

bro why you dont install the outer hub of clutch assembly of n250 is there any diffrence on that

@bjsp0309

5 ай бұрын

slight difference

Guys, pls advise on if i can purchase N160, heard that bajaj engines develop issues afetr 2-3 years.

This is called detailed video, but henceforth no BGM please.

Hey man I am about to do this in RS200 PLEASE LET ME KNOW CONS OF THIS MODIFICATION SO THAT I CAN BE READY FOR ANY CONSEQUENCES

Obviously apply fresh oil on new plates to avoid burning it up abit..& also reminder of changing oil filter while changing it to a new one..😅

Bro make a vdo on Installation of SC in r15 v2 ( have see in some vdos that r15 v3 SC is direct fit, but those vdos were not clear and detailed as yours )

Kindly do some videos on Speed 400 new bike, it does not come with rear wheel splash / mud guard which will make shock absorbs to get accumulate dirt.

Bro for rs200

Can I use n160 slipper clutch to ns160 bs4 ? Plz reply bro I'm from Bangladesh ❤️🇧🇩

Make a video on clear clutch cover for dominar 250.

Bro plse help can I install new ns200 speedometer on bs6 ns 200 with all features of new model?

Ns 200 bs7 obd 2024 is compatible this slipper clutch

Hiii, can you provide a purchase link to the tool you used to remove the clutch lock nut

Broo i have duke 200 bs6 will this slipper clutch work for me because clutch of duke 200 is hard please reply

bro top speed how much bro after slipper clutch installed 🙄

@mohitranjitthakur

10 ай бұрын

No increase in top speed , only pick up , acceleration, mileage, smooth gear shifting and less jerk meanwhile downshifting

I'm having NS 200 BS3 (2012 Model) can i install Slipper Clutch?...

Can this be used in the Ns160 ??

Bro is there any problem while installing on rs 200 2017 model

Such useful video. Tnq bro

how about rs200 do we can do the same with it??

Bro then i guess the same clutch assembly can be used for a bs3 duke 200 as well? Please let me know! Thanks

@ARKIONX

7 ай бұрын

Yes

Pulsar as150, ye Sleeper clutch Assembly use kara jaiga?

is this slipper clutch can be installed in pulsar 220f also??????

De que moto es el embrague que le colocaste a la ns200?

Can't we use the N250 clutch housing?

Does it fit for the new 2023 model plz reply

Shall i install this clutch in duke 200 bs4 model

Where can i buy the clutch assembly?

Bro can I install on ns125 ?

can We Do Same With KTM Rc 200 bs3 please reply

Do you recommand changing handle bar.. im thinking to change from long time .. but i doubt if its safe on high speed and other conditions..

@ARKIONX

11 ай бұрын

Hey @mvlvr If you are looking for a comfortable riding posture then yah, you can go ahead and replace your handlebar with duke 250 one or dominar 400 one Speaking of high speed safety, I have ridden approx 2k KMS with the same without any problems and the handlebar is strong enough to support the weight. Also in case if you are planning to change then I do recommend you to only use original bolts from Bajaj or TVS instead of cheap once.

@mvlvr

11 ай бұрын

@@ARKIONX thanks responding.. was just going through your videos.. ur making some quality videos and explanation is excellent..ur so good at what you do..

@rasta244

11 ай бұрын

Bs6 n250 slipper clutch can fit to ns200 bs6?

@gowtham9153

8 ай бұрын

​@@rasta244i think we can

Can i install to ktm duke 125 bs4 as well?

Bhaiya can we install this slipper clucth in n160 ❤❤

@abhisheksadmake2846

10 ай бұрын

N160 me nahi hai kya slipper cluttch?

We already know that ns, rs have the problem of gears specially when we downshift suddenly from 6th to 2nd. It feels like gears r gone. M wondering after installation the gears would be behave same like stock? Did u notice something? Slipper clutch matches the revs so well nd yes it always reduces the vibration nd Jerks. Is there any changes noticeable into your vehicle bro?

@ARKIONX

10 ай бұрын

Yes, after installing slipper clutch, the gear shifts are much smoother and have less vibrations.

What about the running speed and performance??

bro irritating bgm bro

Hi Bro, Thanks for the amazing video. Does this slipper clutch fit Pulsar N160 ?

@dishantsharma3343

Ай бұрын

I also want this ans , but i am doing engine breaking while rev matching so this technique works fine for me , and i don't feel any kind of back torque in my bike i also own N 160

I was waiting for this video..Thank you, is there any problem after riding for longer hours?

@ARKIONX

11 ай бұрын

No problems so far, will post a separate video on the experience after installing slipper clutch.

Can we install ABS in non abs model ns200?

Can put a link on where can we order?

I have a bs3 ns200 sir. Can i install please reply

Please tell me bro Which headlight ?

Bro put so many mods into this motorcycle just to make it a slower NS400Z😂😂😂

Can i add this slipper clutch to my new gen rc 200 as of both engines look like same

@ARKIONX

11 ай бұрын

Yes you can

Can we get slippers clutch for rs200

It's Amazing ❤

what did you apply on gasket before installing cover? slipper clutch cost and of which bike??

@Ultimateajit

7 ай бұрын

3300 and that is dominar 250cc is direct fit for NS200 and RS200

Indicator and projector headlamp link ?

Is it ok for ns 200 2023 bs7 ?

Is it fit directly to rs 200 ???

Can you tell me if the same can be done for CBR250R? or any other way? Thank you.

@damaihati7151

10 ай бұрын

Different engine

@madhukeshnp

10 ай бұрын

@@damaihati7151 omg! I never knew that Bajaj NS200 and Honda CBR250R has two different engines. Thank you for comfirming. Let me see if i can install Ns200 engine on to CBR.🤷‍♀🤷‍♀🤦‍♂🤦‍♂

Bro rs200 meh lagega bs6??

I have Bajaj Pulsar NS 160. Model 2021. Can I install slipper clutch in my bike ? In Bangladesh is it available in authorized bajaj service centre ?

@ARKIONX

11 ай бұрын

Hi bro ! Unfortunately you cannot install in NS160 . The parts will be available in Bajaj centre across India.

Will this kit fits on ns160 bs7 or not?

@ARKIONX

10 ай бұрын

No