Some solid electronics you chose Kurt . I loved Your surprised reaction when it came apart so easy. So been there! Great video

@KurtsRCs

3 жыл бұрын

Haha thanks bro

@eddylim1105

3 жыл бұрын

@kurts

@eddylim1105

3 жыл бұрын

Is the pinion stock?

@alphaalpha7758

3 жыл бұрын

Do you know which connector for the bettery ?

Gonna go brushless on my kyosho 1970 frazer chevelle. Thanx for Taking time out your day to make this video 👍🏻

@KurtsRCs

2 жыл бұрын

Thanks for watching i'm glad it helped you

Nicely made install vid!!i jus bought the mk2 drift supra n i love it lol def a winner in my book😊

@KurtsRCs

11 ай бұрын

That's a nice car

Thanks for the video! Just upgraded my Fazer MK2 El Camino to the exact same setup so your video was super helpful :)

@KurtsRCs

2 жыл бұрын

Glad it helped you, have fun

Thanks man I was set on taking mine apart. The thing was glued so strong I thought it was screwed on. Im glad I checked this out. Thank you

Cool install. 👍🏻 I know it doesn’t have to be perfect but a really easy way to trim the double sided tape is to stick it on your part the set that on a piece of wood or a flat piece of plastic then trim it with your utility knife.

@KurtsRCs

3 жыл бұрын

Thanks that’s a good idea I’ll have to try that next time

I just picked up the same car yesterday, it is so nice and that electronic you selected will be nice in there. Good choice. 👍🏻👊🏻👌

@KurtsRCs

2 жыл бұрын

You are going to love it, It handle so good

note to self, plug the heat sink cable in before seating the motor

@KurtsRCs

5 ай бұрын

That would be a good note 🤣 thanks for watching

catching an old one hahaha. very cool car man.

@KurtsRCs

2 жыл бұрын

Thanks for watching

Bad ass setup! Great video Kurt!

Nice one kurt enjoyed the watch

@KurtsRCs

3 жыл бұрын

Thanks for watching

Great video I really enjoy it thanks for making it

@KurtsRCs

2 жыл бұрын

Thanks hope it helped you

Nice work well done looks good 👍

@KurtsRCs

2 жыл бұрын

Thank you

Thanks for the video tutorial, just want to know, how did you connect and setup the ESC so it will bind and receive signals from the stock Kyosho receiver?

Nice Kurt's I'm building a 2wd Fazer at moment

@KurtsRCs

3 жыл бұрын

Nice 2wd will be fun to drive

Great video. Keep it up and you will have lots of subscribers very soon.

@KurtsRCs

3 жыл бұрын

Thanks for watching

I've been looking to start an on- road touring car style of build. Didn't really know much about the Kyosho. Thanks for the look at it. I'm kind of leaning towards the 4tech 2.0 but still don't know cause I'm mainly a crawler guy.

@KurtsRCs

3 жыл бұрын

The Kyosho is a great platform but parts are hard to get right now. The 4tec is also a great platform but parts are everywhere and I think the 4tec is built a little better and stronger but that is my opinion Thanks for watching

Great video.

@KurtsRCs

3 жыл бұрын

Thanks

Nice work

@KurtsRCs

3 жыл бұрын

Thanks

Did the cable from motor to esc is correct? I am kinda confuse on how did you came up with that set for blue yellow orange?

How long is the center shaft?

I want to get the Kyosho FAZER MK2 Chevy Camaro Z28. It's worth considering closing that too 👍

Did you upgraded your pinion gear and spur? Or are you still running stock?

Did your esc come with a capacitor?

Owiii 💥💥💥🔥 💯💯💯

@KurtsRCs

2 жыл бұрын

Thank you

Great choice man.. 👍

@KurtsRCs

3 жыл бұрын

Thanks, I’ll be hitting you up for a drive line after the holidays is you still have one

@KaniZRC

3 жыл бұрын

@@KurtsRCs V2 shaft coming soon this week. One peice shaft kit.

Witch better than Tamiya TT01 Kurt's??

Kurt.....outof the box could I run 2S lipo in this model? Is the ESC low voltage lipo safe, etc? Thanks

@KurtsRCs

3 жыл бұрын

Brent Ferrell yes you can run 2s lipo in this car out of the box

@sm6451

3 жыл бұрын

@@KurtsRCs I ran a 3s LiPo out of the box. Ran just to test.

Awesome upgrades,can't wait yo see it rip

@KurtsRCs

3 жыл бұрын

Thanks should be a fun rip now

Looks like a hobbywing max8 won’t fit in there then, dang really hoped it would

@KurtsRCs

2 жыл бұрын

You would have to mod the whole car to get that to fit

What type of screwdriver do I need to take the think out from the motor?

@KurtsRCs

2 жыл бұрын

You need a 1.5, 2.0, 2.5 hex

It took me a minute to figure out the motor mount. I heard you say "I" setting on the mount for a 37T pinion? I've been trying to figure out the correct letter to pinion configuration?

@aronroth6027

2 жыл бұрын

Same here , I just bought the same brushed motor and esc , I also have the same kyosho 37t pinion , I don’t understand the letters that much either

@NS-lz6jh

2 жыл бұрын

@@aronroth6027 its in the instructions! Lol. I never read them until all else fails.

@aronroth6027

2 жыл бұрын

Thanks for letting me know , I actually did figure it out , when I upgraded my kyosho el Camino to a castle creations brushless system , I was going to go with the setup in the video like he did , but I think that the specs on castle creations is a little better

Hey bud! I've got the 5400kv set up in my L chassis. I've had to go to foam tires as stock ones ballooned too much and started melting the body lol

@KurtsRCs

3 жыл бұрын

It’s the stock spur and 37t pinion. It is one of my favorite cars set up like this it handles so good. I think the 4tec spur gears will fit with a little mod I’ll be trying to fit on it in

@sm6451

3 жыл бұрын

How does the 5400kv fair on your RC? Has it lasted? Has it stopped working? Pros & Cons?

@SuperDrake79

3 жыл бұрын

@@sm6451 mine is going strong. I haven’t heard of any issues and tbh it’s a bit over powered for 1/10 scale touring cars. What platform are you thinking of using it for?

@sm6451

3 жыл бұрын

@@SuperDrake79 I bought it for my Kyosho Fazer MK2. I think ill just have monitor heat and find the balance between performance, stability and temperature.

@SuperDrake79

3 жыл бұрын

@@sm6451 it’ll be great. Get some contact foam 26mm tires off AMain. I had no heat issues and we have high humidity around mid 90’s - low 100’s F.

I recommend foam tires because this machine smokes rubber ones in a few runs

@KurtsRCs

3 жыл бұрын

My stock tires are bald so I was going to burn them up and get some new tires. I’ll try some contact foams from one of my other cars to see how it handles. Foam is good for straight but rubber is good for sliding around. Might have to get both 😂

@AvidRCWorld

3 жыл бұрын

@@KurtsRCs I have a pair of both and yes!! I do my speedruns and track running on foams and just bashing around on rubbers

@alphaalpha7758

3 жыл бұрын

Do you know whic battery connector the hobby wing has?

Brother, seria ótimo vc mostrar a conversão do kyosho a combustão para o elétrico, forte abraço do Brasil

@KurtsRCs

2 жыл бұрын

Thank you I do not have a combustion car but that would be a good video

@demircast5488

2 жыл бұрын

Thanks

Did your stock pinion have no grub screw ? Mine did not, it was plastic with no grub screw.

@KurtsRCs

3 жыл бұрын

It was plastic with no grub screw, I got a metal 37t from Kyosho

@rcmedia9516

3 жыл бұрын

@@KurtsRCs thank you. Did you just pry the plastic pinion off ?

@KurtsRCs

3 жыл бұрын

Ya it just slides off, it is tight but i put a screw driver under it and popped it off

@rcmedia9516

3 жыл бұрын

@@KurtsRCs awesome thank you. Any issues with Spurs and diffs going brushless ?

@KurtsRCs

3 жыл бұрын

Not so far everything is holding up good

I bought the Hobbywing 3652 3s 5400kv motor combo. Do you forsee any limitations or problems regarding that motor vs the 4000kv motor? Or should it be ok? Also, how is it running since you installed the upgrades? How does Hobbywing compare to some of the other brands? Has it lasted or did it break? UPDATE: Got my Hobbywing 3652 3s 5400kv motor/ESC combo today and installed. Hardest part was to cable manage. All other parts fit like a glove. Waiting for my low profile 3s LiPos. Its been raining.

@KurtsRCs

3 жыл бұрын

That will work good in that car

It’s a 60 amp version the 120 amp looks the same but is much bigger

Which battery connector?

@KurtsRCs

3 жыл бұрын

XT60

@alphaalpha7758

3 жыл бұрын

@@KurtsRCs does it come with it?

@KurtsRCs

3 жыл бұрын

Yes

@alphaalpha7758

3 жыл бұрын

@@KurtsRCs already soldered on it? The brushless motor and ecs

@KurtsRCs

3 жыл бұрын

If you buy the combo pack it is already set up. Everything is soldered just need a battery with a xt60 on it

It seems that everyone is very happy with the Fazer , I bought a Tamiya tg10 mk2 fn purely to use 190mm bodies , boy was I sorry , no bearings , single speed , fuel tank sits too far out , they don't even line the body posts up correctly, the real bonus ....Tamiya paint is destroyed by fuel . Nitro is as you Americans say total trash .