Install Guide 6.7L Powerstroke Cold & Hot Side Charge Tube
Save $20 when you combine the Pusher 3" Hot & Cold Side Charge Tubes with our Throttle Valve Adapter. Replace your failure prone OEM plastic charge tubes with fully machined, mandrel bent, and TIG welded assemblies to fix the problem for good. This is the go-to setup for shops and truck owners alike looking for the highest quality solution for an OEM tuned truck.
FEATURES
- Replaces the restrictive failure prone plastic factory cold side charge tube as well as the hot side
- Fully TIG welded 3" mandrel bent steel tubing with machined IAT sensor port and two auxiliary 1/8" NPT ports
- Engineered for optimum routing and best fitment
- Includes a fully machined 6061-T6 throttle valve adapter that is anodized in our signature titanium finish for superior corrosion control
- Includes all new HD silicone connections and full stainless t-bolt clamps
- Proven to hold compound turbo system boost levels
- Tested for over two years with Pusher's North American dealer network to ensure these are the best charge tubes available
- Stocked in six colors for same day shipping on most orders (orders must be placed by 3pm EST for same day shipping). Custom colors available, please contact us for a quote
Visit our website for more information.
pusherintakes....
2011-14 Ford 6.7L Powerstroke w/ Throttle Valve Adapter
pusherintakes....
2011-14 Ford 6.7L Powerstroke w/ Throttle Valve Replacement
pusherintakes....
Пікірлер: 30
Just finished installing. Some tight spots but the video really helped. Thank you!
@pusherintakes
3 жыл бұрын
Awesome! Glad it helped.
Makes me want a Ford
Why is my cold side different from the one you are installing
What does anyone recommend on installing the aluminum piece at the throttle body when it seems the ID is the same as the OD of throttle body tube, I wrestled a couple of hours and gave up. China made so planning on ordering another that’s American made. Any and all suggestions or critizing is appreciated.
@pusherintakes
10 ай бұрын
We don't quite follow - do you have our product, or a competitive part?
I just installed mine today and had a shudder at startup but it went away, is this cause for concern or normal?
@josephleonardo2526
19 күн бұрын
Did you do the throttle valve delete or just the pipes?
I recently ordered this kit and I was wondering how much of a difference you actually noticed?
@joshuakazfields4374
3 жыл бұрын
I just ordered the same kit. Probably won’t answer you. Many comments are left unanswered. Hope the parts are great at least.
@bjs9128
3 жыл бұрын
I know will we need a tune as well?
I put the c clip on and still leaking air it’s not sealing right
@pusherintakes
4 жыл бұрын
Please give us a call to troubleshoot - 772.589.8385
I am installing the pusher cold side mind dint come with the quick disconnect I have to remove the 4 bolts and the butterfly part what is the reason for this I don’t need the butterfly thanks
@joshuakazfields4374
3 жыл бұрын
Ordered wrong one
@pusherintakes
3 жыл бұрын
We have two different options, you may have ordered the wrong one - if this hasn't already been resolved, give us a call to figure it out. 772-212-9290
These are 3" pipes? What size are the stock pipes???
@pusherintakes
2 жыл бұрын
Same, but stock are either a) made of plastic that's prone to failure, or b) connected with overly long couplers that are prone to failure. 😬 Our hot and cold side charge tubes on the other hand are meant to last the lifetime of the truck.
The video just stopped playing a few minutes in.
How close is y’all’s blue to the “other” company’s blue
@pusherintakes
Жыл бұрын
This question is more common than you'd think! We've never held them side to side, so we can't really compare.
Do you have any for the 2020-2021 6.7's? These are for 2011-2019, they will not fit the 20/21's.
@pusherintakes
3 жыл бұрын
The hot side works all the way up to 2021, the cold side with the throttle valve adapter (not replacement) does as well.
So what's the final word on this.. is it trustworthy or not?
@pusherintakes
3 жыл бұрын
Over 150 reviews so far on our site, check them out. Spoiler alert - 95% are 5 stars :-)
What does this do for the truck?
@pusherintakes
3 жыл бұрын
This replaces failure prone factory parts, while also giving additional air delivery.
Will I need a tune?
@pusherintakes
3 жыл бұрын
For the cold side charge tube with the throttle valve adapter - no you won't. With with the throttle valve replacement (off-road use) - yes you will.
Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!